New macbook pro, transition from pc to macbook

hi folks, i am a new macbook pro user, i have my itunes on my pc, that i normally synced my iphone 4 with.
i copied over the itunes folder from the pc to the mac, and i can see the music, in itunes. i also authorised the macbook in itunes.
i plugged in the iphone 4 to the mac, and when tried to sync it said apps would be removed, so i cancelled the sync.
what is the best way to sync and backup the iphone 4 with the pc without loosing data, from the iphone 4.?

see this thread
http://discussions.apple.com/thread.jspa?threadID=2709559&tstart=0

Similar Messages

Where did everyone's new Mac Pro ship from?

Mine shipped from "BLOOMINGTON, CA". And it only took 3 days, with FedEx Ground. Interesting, I thought it's manufactured in China?

I got a shipping notice for mine this evening. Fedex says they picked it up in Fullerton, CA.
My understanding is that Apple routinely does the CTO/BTO final configurations in the USA.
Regards,
George

NEW DPS Pro Guidelines from Adobe

I'm understanding that users of Adobe DPS Professional Edition who publish more than one app (such as us) will soon LOSE the ability to publish multiple apps. I would love to get together with as many of you as possible and work under one shared Adobe DPS Enterprise Edition license.
Please e-mail me: [email protected]

This topic is already covered at http://forums.adobe.com/thread/1426425. Please use that thread for further discussion, thanks.
Neil

How do I speed up Lightroom on my new Mac Pro (2013)?

I have tried everything suggested in the forums like running imports in parallel, etc., and all my data is on the super fast built-in PCI-Express SSD of the Mac Pro. However, I have numerous speed problems with Lightroom 5.3 (latest version) when importing and working with photos.
Right now, here is what I am doing
* Performing three parallel imports for maximum speed as suggested in September, 2013 (to supposedly boost input from 25% CPU to 60% on a multi-core machine).
* Buildling 1:1 previews and all the other suggested official Lightroom Performance tips
And what I am getting:
* Between 11 to 15% CPU utilization, even when running imports and building previews in parallel.
* Data being read at only 2.5 to 6.5 MB per second.
* When I look at images even after the previews have been built, I see a sharp image for about 1/100th of a second, then it blurs for about 3/4 of a second, then it sharpens up again in about one second, as if Lightroom is redeveloping it again despite having a 1:1 preview fully built.
To my workflow, this is horrifically slow. I am tasked to go through about 5,300 sports photography images in an hour if possible, many taken at over 10 frames per second with a 1D X. To do this efficiently requires being able to INSTANTLY see the exact sharpness of a photograph, not being blurred for a full second, so that I can pick out the sharpest image from a burst of many images of each top play.
I love the features of being able to flag/unflag with P and U, star with 1-5, go full screen with F, zoom with Z, crop with R, etc., but the productivity potential that those fantastic keyboards shortcuts have is being utterly defeated by the fact that Lightroom is going SUPER slow even on this brand new 6-core Mac Pro. It literally is much slower than using Picasa or FastStone on a cheap Core i3 laptop with a regular HDD.
How can I configure Lightroom to use all six cores and more of the hard drive speed to speed up my workflow?
Obviously, Lightroom should be able to do much better if it were using more than 15% of the CPU and more than 1% of the SSD capability.
For me this is a SERIOUS problem and is preventing my new Mac Pro purchase from being any use to me. I am having to use other software right now to meet my production deadlines, and then go back through it later on Lightroom at a glacially slow pace. After a couple weeks of this duplicated workflow, I am just getting tired of it.

Maybe you could help us help you by providing your systen details in full the location of your files.
Thank you...

New Mac Pro (Late 2013) and CC 2014

Ok, I've been working on one of the new Mac Pro's from late 2013 and using CC 2013 with R3D footage quite successfully (though without great debayering performance on the R3D - I know it's supposed to be improved in CC 2014).
I'm running 10.9.2 Mac OSX.
When football season here in the states starts in two weeks, I will have a VERY deadline intensive 30 minute television show that I have to turn around from Saturday night at 2am until 8am Sunday morning.
I have purchased CC 2014, but have read in the past few weeks about the headaches the combination of OS 10.9.3 (and .4) and CC 20014 have caused.
My question is, where do we stand with those issues, and what would the community / Adobe moderators say about me heading up to the latest OS and CC 2014 under these circumstances? Thanks so much for the insight everyone.
Banks

jameskachan wrote:
…The obvious reason [sic] seems to suggest…
That's what it suggests to you, in the limited scope of your vision and knowledge, and without your having provided detailed specs about your hardware.
Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
We don't even know what your specific issues are, and for all we know you may be running the pathetic, buggy Yosemite OS—which Apple is giving away for free.
In this case, you have been enormously fortunate in that you received a reply from none other than Gµrµ Chris Cox, a top Adobe engineer who has been writing Photoshop code since the last millennium.
It's hight time you drop the attitude and avoid further embarrassing yourself in a public forum. Just my two cents.

New Mac Pro problems

I got a new Mac Pro today from Apple and have been having major problems with it.
The OSX installs ok and i get through to normal screens etc.
the problem arises with the installation of the Apple Intel Security patch. on restart I get the "your need to start your computer" etc. Which normally means a kernal problem.
Every time ive booted or restarted the computer I get the same.
Ive tried booting it from cd no good. Ive tried safe boot - No good. Apple help desk - Useless.
Have done a disk utility check off the CDcd, all ok so it could be software related. Or it could be some hardware problem

Hi
Anything at Dr Smoke's Xlab page helpful?
http://www.thexlab.com/faqs/kernelpanics.html
Steve

How to transfer fcp7 to new mac pro mavericks

OSX 10.9.5
2014 Mac Pro (trash can)
2.7 GHz 12 Core Intel Xeon E5
32GB 1867 MHz DDR3
Hey everyone, I need some help.
I would like to transfer FCP7 to my recently purchased Mac Pro.
I'm in the process of upgrading, but first need FCP7 to work before making all the final changes.
I would attempt a clean install but the original FCS, along with the FCP7 upgrade discs are currently lost ever since I moved from NY TO MN.
I migrated FCP7 directly from my 2010 Mac Pro into the new Mac Pro applications folder. But immedialetly after trying to launch FCP7 I get "Final Cut Pro cannot be opened because of a problem."
Did I miss any hidden files or folders located elsewhere in the CPU?
I would like to run FCP7 on the new Mac Pro (2014) from my previously purchased copy currently located on my older Mac Pro (2010) which is also running Mavericks.
I hope I made enough sense to you all, enough to get pointed in the right direction.
Peace and thank you,
B-NYC

BrooklyNYC11222 wrote:
I migrated FCP7 directly from my 2010 Mac Pro into the new Mac Pro applications folder.
How did you do this? Without the original install discs, your only option it to use the Migration Assistant.app.
If you just copied the application, it will not work.
If you did get if from your older computer via the Migration Assistant.app, then trash your FCP preferences.
You can download (free) Preference Manager from Digital Rebellion and it will do all the work for you:
http://www.digitalrebellion.com/prefman/
Your FCP preferences will be reset to default settings the next time you launch FCP.
MtD

Transferring files from my iBook to my new MacBook Pro

So I treated (an understatement) myself to a new MacBook Pro a few days ago after having a few difficulties with my beloved iBook G4. After I damaged the iBook's original power adapter, I managed to buy a dodgy one on eBay, which packed up and left me running on battery power.
I'm expecting my MacBook Pro to arrive any day now and I know that during the setup procedure (of OS 10.3, at least), you're given the option to transfer all your documents across from your previous Mac to a new one via Firewire. Brilliant idea, but my iBook's only got 15 minutes of power left and I have no way to charge it back up for the moment, so I somehow doubt it would hold out for the entirety of the procedure.
Basically, is there a way to launch the file-transfer wizard once Leopard is up and running? I'm paying particular attention to the transfer of all my E-mails from Mail and events from iCal.
On a similar topic, is there any way to sync iCal between the two Macs using iSync?
Thanks in advance for your help.

Kappy has written a helpful guide for PPC to Intel transition, which you can read in this thread:
http://discussions.apple.com/thread.jspa?messageID=6630396&#6630396
You will still need to use firewire target disk mode, but not the complete migration assistant process (which can be a problem going from PPC to Intel anyway!). Scroll down to step #4, which will tell you exactly which files you really need to transfer over for Mail and iCal.
Hope this helps...

Transfer all data from MacBook to new MacBook Pro

Hi,
I am currently using a 13 inch Macbook purchased in 2007. The system has since been upgraded and it is now version 10.6.8.
I have also ordered and received a Macbook Pro (arrived yesterday!). The box has not been opened yet. My intention is to move everything (applications, data, etc.) from my old Macbook to this brand new one, so that the transition is absolutely seamless (without me having to install new software, for example).
I have been using the Time Machine to reguarly backup the data of my old Macbook.
Not being computer-savvy, I have the following couple of questions and would very much appreciate your advice:
1. (While I have not figured out how to do it) Is using Time Machine to 'transfer' data the best way in terms of being able to acheive a seamless transition?
2. I have a feeling that it is better to do the 'transfer' right from the beginning, when I first start up the new MacBook Pro, rather than beginning to use the Mac Pro now and then do the transfer. Am I right in this? (I have been kept from starting up my MacBook Pro for this precise reason).
3. Would there be a conflict in terms of the difference in the version of the OSX in the 'transfer' process? My old Macbook is 10.6.8. I don't know what the version of the newly arrived MacBook Pro is. Suppose the MacBook Pro is a more 'advanced' version – would this difference block/affect my attempt to do the transfer? And relatedly, even if transfer were possible, would I suffer any loss in functionality of the MacBook Pro in this process?
Thank you for your help and patience!

yinsdianao wrote:
My intention is to move everything (applications, data, etc.) from my old Macbook to this brand new one, so that the transition is absolutely seamless (without me having to install new software, for example).
10.7 won't run your Rosetta based software and third party hardware drivers.
You can use this site to determine what will/will not work.
http://roaringapps.com/apps:table
IMO a new machine should get all new versions or copies of software.
Why import all the crap with Setup/Migration Assistant and possibly gunk up your machine? slow it down? have to delete stuff manually as their is no uninstaller for 10.7?
You CAN transfer the license provided you work with the developer and remove the other copy from the older machine. Contact the dev and get a new license key, they will likely want to keep you as a customer and assist.
However 10.7 is a all 64 bit OS, so a lot of third party software pehaps will require new upgraded versions than what you have on the 10.6 machine.
I have been using the Time Machine to reguarly backup the data of my old Macbook.
Good don't connect it to the new Mac or else it won't work to restore the old one.
As the 10.7 TM will then add IT's changes. Use a new drive to TM the 10.7 machine.
1. (While I have not figured out how to do it) Is using Time Machine to 'transfer' data the best way in terms of being able to acheive a seamless transition?
Don't use Time Machine, leave that for only connecting to the older Mac, that's your backup for THAT machine, use a new drive for TM to the newer Mac for now or go without until this machine checks out.
Use Firewire Target Disk Mode instead to the older Mac.
Log into the new Mac and set it up with the same user name as on the old Mac.
Install all your 10.7 compatible programs first from fresh sources so they run faster longer. (user files should be the last thing installed on any new machine as they clog up a hard drive's speed)
Use a Firewire cable (and a 800 to 400 adapter if needed) to connect the old Mac to the new Mac, then hold T boot the old Mac, the old Mac's hard drive will appear on the Desktop of the new Mac.
Now you can simply drag and drop copy to your hearts content of any files you wish to keep on the new machine and leave the rest on the old machine.
Since you used the same user name, the files will work like iTunes playlists (you can change permisisons on them with Get Info if not)
You can choose to use Setup/Migration Assistant with a Mac in Firewire Target Disk mode, but I don't advise using either unless you have a really clean machine free of unwanted data or glitches.
2. I have a feeling that it is better to do the 'transfer' right from the beginning, when I first start up the new MacBook Pro, rather than beginning to use the Mac Pro now and then do the transfer. Am I right in this? (I have been kept from starting up my MacBook Pro for this precise reason).
That's called Setup Assistant, later you can run Migration Assistant, but it creates another user in the process.
Both are not exactly perfect and don't provide a clean system, drag the old machines issues with them sometimes. However if your old machine is rather pristine, then fine. Most people's machines are messed up and a lot don't know it.
3. Would there be a conflict in terms of the difference in the version of the OSX in the 'transfer' process? My old Macbook is 10.6.8. I don't know what the version of the newly arrived MacBook Pro is. Suppose the MacBook Pro is a more 'advanced' version – would this difference block/affect my attempt to do the transfer?
New Mac's come with 10.7, it possibly won't run a lot of your pre-existing 10.5 or 10.6 software.
And relatedly, even if transfer were possible, would I suffer any loss in functionality of the MacBook Pro in this process?
Yes, there is a possibility that if your old Mac is messed up slightly that those problems (as well as incompatible programs) can cause issues or slowdown behavior on the new Mac.
If this occurs then you'll have to wipe the whole mess, download Lion from Apple's severs (fast internet) and start all over again doing it manually.
IMO you should find out first all the 10.7 programs you need, and then install clean 10.7 versions of those programs from original sources rather than import crap and have to go about removing stuff that won't work or risk a hosed machine.
Automation is nice, but it has it's drawbacks, it's stupid. If you have a very clean system, not a whole lot of other junk, system tweaks and gizmos running, then automation should be fine.

Which files do I transfer from external drive to new MacBook Pro?

Hi there,
My hard drive went bad on my MacBook Pro, but fortunately I did a weekly backup.
Unfortunately, it was not a Cloned back up or a Time Machine backup, so I can't seem to be able to use the Migration Assistant to transfer my files to my new MacBook Pro.
Is there a list of files that I should make sure to copy over?
I know that I need to copy my apps that aren't already native to Mavericks. Also, most of the files in my User Folder. Is it wise to copy the entire library in the User Folder, or should I select individual files and folders? Is there anything else I should look for?
If there is a step by step tutorial on this, and I have somehow missed it, please point me on my way.
Thanks for any help.
Spooky Mizu

Spooky Mizu wrote:
I had tried to copy everything from my backup, but it made the OS lag and be glitchy.
Is it a bad idea to copy things to the library (the one that is located at macintosh hd/library)?
One thing is for sure...I'll be switching to Time Machine or CCC...this is taking a looooong time.
So, any ideas out there?
It is too late, but either a bootable clone (I use SuperDuper!) or a Time Machine backup would have made the transition smooth.
I do not know of any "cookbook" approach to help you.
I think I would have reinstalled OS X 10.9.4 and then moved all my data files. I do not know what settings, files, etc. would need to be moved.
Barry

Use back up from Time Machine to start new MacBook Pro

Using the Time Machine and an external Hard Drive I back up my 3 years old MacBook (running Lion and with hard drive of 250 GB)
I am planning to purchase a new MacBook Pro (with a hard drive of 750 GB)
how do I transfer all my software and Data to my new computer?
if I plug my Time Machine to it will set up my new computer just the way I have my old Computer?
will all software work properly?
Any thing else I should have in Consideration??

K2spuky wrote:
Using the Time Machine and an external Hard Drive I back up my 3 years old MacBook (running Lion and with hard drive of 250 GB). Will all software work properly?
The old machine is running Lion already, then all your programs are ready already for the new machine with Lion.
how do I transfer all my software and Data to my new computer?
if I plug my Time Machine to it will set up my new computer just the way I have my old Computer?
Plug the TimeMachine drive into the new computer, boot it and when you go through the setup there will be a opportunity to transfer from the TM drive.
Shouldn't be a problem as your already on Lion.
Of course if your older machine software is crappy and slow, so will your new machine.
You might decide to fresh install instead, create the same user on the new machine then install all your programs from fresh original sources and then transfer files manually from the older machine, droppping the contents right into the same user folders as on the old machine.
More work, but actually saves work if your older machine is screwed up. Because Setup and Migration assistant has no brains, it transfers crap just as well as the good stuff. and despite what it says, it seems to transfer programs even if you state you just want files. Why I don't know, it's what someone said.
I never use either, because reinstalling the whole OS again, especially Lion with the Internet download, is not worth the chance. I'd rather download a few programs and transfer manually, takes about the same amount of time.

What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro? I need to transfer files from the old hard drive to the new computer.

What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.

No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2?

Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?

Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?

Welcome to Apple Support Communities
You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance

How do I transfer files from my old MacBook Pro to my New MacBook Pro?

I am trying to transfer some files, not all, from my old MacBook Pro to my new MacBook Pro. I have tried to use Migration Assistant, but it doesn't let me choose what I want to transfer (only generic things like "users" and "files and folders"). I have tried to use Firewire. Now here is the funny thing. When I put my old mac in target mode it doesn't appear on my new mac anywhere. But, when I put my new mac in target mode, it pops right up on the dashboard and in finder. The problem is I have tried using my new mac as the target and just place the files into the icon, but the don't stay after I eject. I get a prompt that says downloading and when all files and apps are transferred I turn off my new mac then turn it back on and nothing. I've done search after search and repeated this process 3 times and nothing. Am I doing something wrong? Please help.

Time Machine will not "overwrite". New back ups are added to what is there, without erasing.
Connect the Time Machine back up, double click on the icon and navigate through its contents - the back ups are chronological, so you just select the date then go through the contents just like on any other drive. You can select any files you want and drag and drop on the new Mac's desktop (or anywhere else).

I just got a new macbook pro. How do I get the 900 songs that I took off of cds into iTunes on my computer from my iPhone. I had no problems syncing the music I had purchased from iTunes. I have tried to sync it using iTunes match, this did not work.

I just got a new macbook pro. How do I get the 900+ songs that I took off of cds into iTunes on my computer from my iPhone. I had no problems syncing the music I had purchased from iTunes. I have tried to sync it using iTunes match, this did not work. I would like to have access to my full library without going into the user profile of my old computer, which is on my new computers hard drive. I would like to eventually delete the old profile so that I have more space on my hard drive.

http://support.apple.com/kb/HT4527?viewlocale=en_US&locale=en_US

New macbook pro, transition from pc to macbook

Similar Messages

Maybe you are looking for