New Macbook Pro with a SSD.  Can it be upgraded in the future?

The new Macbook Pro with retina display has a 250 GB hard drive.  My question is:  Can this drive be upgraded in the future (using a standard off the shelf SSD) or are you stuck with the 250 GB drive that it comes with?

The Retina MBP is a totally closed system that cannot be hardware upgraded. Ever. Besides the fact that they used custom components, furthermore those were glued on so disassembly is close to impossible as per the teardowns carried out by IFixIt.com and others. Got a score of ZERO in terms of serviceability.
So if you are gonna be beguiled by just a fancy screen, be sure to buy as much Mac as you can cause that's all the hardware you're gonna get.

Similar Messages

  • I can no longer shoot directly into phaseone software since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
    Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
    And edit your mouse settings to do what you want it to do.
    Secondly, this is not the place to vent. If you have a complaint, there is:
    http://www.apple.com/feedback/
    or http://www.apple.com/contact/
    We are just end users here helping other end users.
    Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
    Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
    Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
    Good luck!

  • Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

    Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

    Hi Winterwilly,
    Welcome to Apple Support Communities. 
    The article linked below answers your question of how to use QuickTime to record something on your MacBook Pro’s screen.
    QuickTime Player 10.x: Record your computer’s screen
    Cheers,
    -Jason

  • HT2499 I have a new MacBook Pro with OS X Lion 10.7.4. The DVD player does not have a feature to store film clips. Why? This is useful for my work and I had it on my older computer? Why the loss of capacity?

    I have a new MacBook Pro with OS X Lion 10.7.4. The DVD player does not have a feature to store film clips. Why? This is useful for my work and I had it on my older computer? Why the loss of capacity?

    I cannot recall the DVD player ever being a place to "store" videos - it is simply an app to play videos.
    If your machine is new, then iMovie should be included as the "shrunk" version of iLife is included with Lion (iMovie, Garageband, and iPhoto). However, iMovie is not a place to store videos either - it is a video editor. You import your clips and edit them in order to then burn to a DVD or share via a social media site.
    Have you considered simply dragging the clips to your folder "Movies"? That would be a great place to just store them (please be aware that videos are usually large files, so keep your hard drive space in mind so you keep a minimum free and available for the OS to operate properly):

  • New MacBook Pros with old SSDs?

    I'm ordering a MacBook Pro soon, and I'd like to install my own SSD which currently has Windows.  It's SATA 2, from 2008, and it's a Samsung (Model Number: MCCOE64G5MPP-0VAD1).  Will this work?

    It will work as long as it is 9.5mm or less in height, everything else seems to be fine (I googled the model # to check it out).  It will also need to be erased and reformatted in Disk Utility (found in your utilities folder).  Mac OS Extended (Journaled) is the most widely used format unless you also plan to run Windows on your soon to be mac.

  • My new macbook pro retina recognizes, but can't transfer data from the Time Machine Volume

    I back up my old 2008 MacBook Pro to a Time Machine volume sitting on a very new 2 TB drive that is connected to a Time capsule via USB. I got that new drive from OtherWorld Computing about 2 months ago.
    I just received a brand new 2012 MBP (retina).
    Pondini's page on setting up a new mac says that it's easiest just to transfer everything over the first itme you start up the new machine. (ref: http://pondini.org/OSX/Setup.html)
    So, I took my new 2012 MBP, plugged it into the Time Capsule directly with ethernet (I have the Thunderbolt-to-USB connector).
    Then turn it on.
    The 3rd page into the startup sequence gives me a choice to "Transfer Information to this Mac". It offers 4 options
    "From Another Mac"
    "From a Windows PC"
    "From Another Disk"
    "Not Now"
    I chose "From Another Disk"
    Then it offers "Select the Source"
    The sources are 4 blue icons. 2 of them are backups of other machines, ones that sit on the Time Capsule's internal drive. 1 is a small "media storage" space I saved on the internal drive of the Time Capsule.
    The important one is "Macbook Pro backup ("StefanTimeCapsule")
    This is the one physically parked in the external USB drive.
    So.... I select it. It asks me to log on with user ID and password, and then says an endless "Connecting" message
    It never gets to the next menu.
    If I arrow "back" in the startup window sequence to the "Select the Source" windo, the 4 blue volumes are again displayed, with the word "Connecting" next to the backup I want, strongly suggesting that the "connection" is never fully established.
    Just for fun I plugged that external USB drive directly into the USB port of the new Retina MBP, but it was not recognized at all.
    I tried different ethernet cables.
    At this point my thoughts are perhaps
    (a) I need a powered USB hub
    (b) I need to somehow have Apple service the Time Capsule (but for what? I don't know)
    I could potentially just transfer from the Old 2008 Macbook Pro Directly, but it seems to me problematic not to be able to access the primary backup.
    Any ideas out there?

    A picture of a screen that suggests my new MBP Retina never connects to the "Macbook Pro backup ("StefanTimeCapsule")
    This is the one that has the files for the backups procured by the Time Machine program. But it can't "connect"-- You 'll see int he sideways pic (sorry!) that the options STILL says "connecting"
    Do i have to make these Time Machines more open to connection?

  • I want to replace the hard drive on my 15inch mid2012 macbook pro with a SSD but I just cannot clone the HD or reimage the SSD and I've tried everything. Please help...

    What can i do to format, image and use the SSD as the primary drive on my macbook pro?

    Install the SSD in an enclosure and connect it to the MBP via USB.
    Open Disk Utility>Erase and format the drive to Mac OS Extended (Journaled).
    Then select Disk Utility>Restore.
    Drag the internal HDD to the Source field.  Drag the SSD to the Destination field.  Click on the Restore button.
    This may take a few hours depending upon how much data has to be transferred.
    When complete, Boot the MBP with the OPTION key. 
    Select the SSD and if it boots the MBP, swap the two drives.
    Ciao.

  • New Macbook Pro with Snow Leopard, can't check Epson R320 ink levels

    Hello,
    A lady on the phone at Epson told me how to do this a few months ago, but I've forgotten, and I can't find the secret again. I keep getting "not available".
    Anybody know how to do this?
    Thank you.

    This is a tough one for Epson, too. They are quite helpful, and are going to call me back today, after we were trying to fix this for 40 min. yesterday. A new driver for Snow Leopard is coming, but they want to find a way for me to see ink levels now.

  • Loading CS5 Master Collection onto new Macbook Pro with no DVD drive

    I have a complete, legitimate, registered version of CS5 Master Collection. I also have a new Macbook Pro with no DVD drive. I have lost the disk, but have the box and confirmation email when I registered the product, with the key code. This product cost alot of money and I really need to get it onto my new machine. Can I do this without having the additional cost of a new DVD drive? I already paid for and own the software with keys so it's not like I'm trying to bend anything or do it for free. Any advice would be appreciated thank you.

    Download the CS5 Master Collection trial version from
    http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
    You must follow the Very Important Instructions on that page first otherwise the links will not work.
    Launch the trial and enter your serial number to license it.

  • What kind of longevity can I expect from the SSD in a new MacBook Pro with Retina Display?

    Hi all,
    I recently ordered a new MacBook Pro with the Retina Display. This will be both my first computer and my first Mac that uses a SSD as the primary storage device. As the title of this post suggests, what I would like to know is what sort of lifespan/longevity can I expect to get out of it? My current MacBook Pro was manufactured in 2007 and has a stock 160GB Fujitsu hard drive that has been fantastic for me over the past 4-5 years. It continues to run like a champ, and I would hope that a brand new SSD would be able to last at least that long. Given that the new retina MBPs cannot be upgraded or (easily) user-serviced, I am somewhat curious to know whether or not Apple's new proprietary SSD modules will give out/slow to a crawl before/after my new machine becomes completely obsolete. I have been searching for articles published within the past few months on whether or not the current crop of SSDs on the market are more reliable than those introduced a year or two ago, but alas, I haven't had much luck. Perhaps it is still too early to tell?
    I found a few discussion threads on here somewhere where some users indicated that their original MacBook Airs, or other SSD-equipped MacBooks, were still performing quite well and responsively after a few years of use. Can anyone substantiate this for me? How long have you been using your SSD(s) in your Mac(s), and do you think the newer models will be able to last several years? I would greatly appreciate any insight.

    ARealMac(PPC)User wrote:
    ...I found a few discussion threads on here somewhere where some users indicated that their original MacBook Airs, or other SSD-equipped MacBooks, were still performing quite well and responsively after a few years of use. Can anyone substantiate this for me? How long have you been using your SSD(s) in your Mac(s), and do you think the newer models will be able to last several years? I would greatly appreciate any insight.
    While I think your concern is legitimate (it was mine too), I think to some extent, how long they last will be up to you. The individual cells in the flash media in an SSD have limited life spans, and SSD controllers have a variety of techniques to spread that wear around evenly (wear leveling). That wear is exacerbated by the controller having to erase a whole block of data when even just one page needs to be changed, and if not all the data in the block is still valid, more data than necessary gets moved (write amplification). To provide some extra room for all this reshuffling of data, SSD manufacturers build in extra space that's inaccessible to the user (over-provisioning), but it typically runs about 7%. (This is a good discussion of the inner workings of all this)
    If you stuff your SSD full of files, so that there's very little room to do all this rearranging, I think you'll experience the slowdown you're concerned about. TRIM, which Apple's SSD's support, will help, but you can too. Allow plenty of free space on your SSD and perhaps partition it so that there is free space outside the partition (check this out to see what a difference it can make). You can't use it but the controller can as an extension of the built-in over-provisioning.
    You also mention that you "will most likely use it to record several tracks and store my growing library of songs and videos." Why not instead use an external SSD connected via USB 3.0 for storage? They're relatively cheap, very fast, and keep the space on your internal working drive free. A BootCamp partition would also take up space, so you might consider using Windows in a Virtual Machine instead. VMware Fusion or Parallels would be installed on the internal SSD but the virtual machine files could  go on the external.
    In any case, your data is more important than your SSD, so back up, back up, back up.

  • Can't install HP Color LaserJet 2600n to my new macbook pro with Yosemite ? Message error : "Can't download the software because of a network problem."

    Hello,
    I'm trying to install my HP Color LaserJet 2600n (USB) to my new macbook pro with Yosemite ? It detects the printer but when I try to install it, I get the message error : "Can't download the software because of a network problem."
    I tried to install the software via the HP website. It's not working.
    Can someone help me with this one ?
    Thanks,

    HP Print Drivers

  • How can I sync my iPad 2 with my new MacBook Pro when it is already synced with my old MacBook? I am getting a message on the new MacBook Pro that says I am not allowed to sync the iPad 2 because it is synced to another iTunes library.

    How can I sync my iPad 2 with my new MacBook Pro when it is already synced with my old MacBook? I am getting a message on the new MacBook Pro that says I am not allowed to sync the iPad 2 because it is synced to another iTunes library.

    1) ensure iTunes is authorized for your iTunes store account(s)
    2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
    3) sync the device
    iTunes will wipe the iPad but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPad with it.
    above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer.
    also, there are PhoneView and iRip.

  • I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display.

    I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display. i have never seen this message before and i have 2 other macbooks and have had many other also. i am assuming this is a problem with the new macbook retina. does anyone know the exact fix to this issue? i have seen many sugestions to try to fix this issue but none have solved the issue for anyone that i can find in the Apple Support Community. thank for looking into this in advance.
    ******A true apple fan********

    Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
    Bebers5

  • How can I transfer my email accounts and emails from my old macbook pro with ML to my new macbook pro with ML

    How can I transfer my email accounts and emails from my old macbook pro with ML to my new macbook pro with ML

    Do you have your system backed up to Time Machine? If so, you can open your user Library and copy your Mail folder from Time Machine to your Desktop on your new machine; then copy THAT folder to your new machine's user Library.
    To get to your user Library, open Finder and Go and press the Option key. Library will show up. Click on it to get into your user Library. Now go into Time Machine and you should see your user Library for Time Machine. Restore the Mail folder to your Desktop.

  • HT3224 What cable can I use to transfer data from a 2008 MacBook Pro to a new MacBook Pro with thunderbolt?

    What cable can I use to transfer data from a 2008 MacBook Pro to a new MacBook Pro with thunderbolt?

    You should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/notebooks/macbook_pro

Maybe you are looking for