New MacBook Pro with Windows 7 only - need OS X installed

Hi,
For my new job, I have been given a new MacBook Pro, but for some strange reason, it only has Windows 7 pre installed. Is there any way of installing Mac OS without trashing the Windows installation? I have booted from the Mac OS install disk and have the option to partition the disk via the disk utility, but would this delete Windows?
I basically need the MacBook to be dual bootable.
Thanks in advance
Greg

I am under the impression that Mac OSX 10.6 is necessary to install Windows via Bootcamp. If your Windows operates via an emulator you would have to have a Mac OSX install to access the application.
I can only guess that the Mac OSX is in some way hidden so that you can only see Windows. Have you tried to boot while holding the option key down to see if there is a Mac start up choice?
I would not repartition with disk utility till you have an answer as it would certainly erase the hard disk. Is there someone at your new job who could explain this situation. Be sure to follow up on this thread as I am quite interested in the explanation.

Similar Messages

I have a newer MacBook Pro with an AMD processor. It is my understanding that Parallels can only be used on Mac's with Intel Processors. Is that true and if so does anyone have recommendations about how to have a windows side to my Mac

I have a newer MacBook Pro with an AMD processor. It is my understanding that Parallels can only be used on Mac's with Intel Processors. Is that true and if so does anyone have recommendations about how to have a windows side to my Mac

Then it either is a pirate clone or you are misinformed.
Apple Computer has never used AMD processors in its products.
However, the Graphics Processing Unit (GPU) is a Radeon unit, which is an AMD subsidiary. Parallels, VMWare, VirtualBox will all work fine with the Intel Core i7 or i5 CPU that powers the Mac, and use the AMD Radeon GPU that drives the displays.

Installing Windows XP on a new MacBook Pro with Retina Display.

I just purchased a new MacBook Pro with Retina display and need to install Windows XP on it so that I may run 3 Windows programs. I have watched a few videos on the internet on how to do this through Boot Camp Assistant, and it says at one point to use the driver CD from Mac to install the drivers. I did not get any CD's with my new MacBook Pro. I also saw on some of these boards that said Boot Camp does not support Windows XP. The people at the Apple store said it can run Windows XP, so I have ordered an original version.
Question 1. Does my MacBook Pro with Retina Display running OS X version 10.8.3 able to run Windows XP?
Question 2. How do I install the drivers?

Would this work? And also, what is the VM I need? Where do I get it?
Microsoft Windows XP Pro - The Professional Choice
Although replaced by Microsoft Windows Vista, Microsoft Windows XP Pro remains the most popular and widely used operating system in the world for business computer applications. While Microsoft Windows Vista does offer some cosmetic improvements and a few new features, nothing can beat Microsoft Windows XP when is comes to performance, stability and, in the case of older computers, speed.
Windows XP Professional delivers a reliable foundation you can count on to keep your computer up and running when you need it most. Not only the operating system is more reliable, it also offers features that make it much faster and easier to recover from system problems. Windows XP Professional, the new standard in reliability and performance, is designed for businesses of all sizes, and for individuals who demand the most from their computing experience. With the ultimate communication and collaboration tools, advanced laptop support, remote access capabilities, and more, Windows XP Professional helps you be more productive. Prepare yourself for the most reliable, secure, and responsive Windows yet. Windows XP Professional gives you the freedom to focus on your business and your customers.
Package Includes:
Coa Sticker Activation Key
DVD Disk
This software is 100% genuine and will validate with Microsoft. The software is new sealed OEM.
System Requirements:
AMD Athlon 64, AMD Opteron, Intel Xeon with Intel EM64T support, Intel Pentium 4 with Intel EM64T support CPUs, Core2Duo, Core2Quad, Intel I7
256 MB of RAM
1.5 GB of available hard disk space
Super VGA (800 x 600) or higher-resolution video adapter and monitor
CD-ROM or DVD drive
Keyboard and Microsoft Mouse or compatible pointing device
64-bit Device Drivers
Package Includes: A genuine COA, genuine software cd with Dell brand logo and Product Key for activation. Although this product has the Dell brand on the CD, the software installs as a full version on any system and will activate with Microsoft. This is a Full OEM Version for a clean installation. This is the full product and will load on computers that do not currently have Windows. Or, if the computer already has Windows, this version will install over your previous version and delete all files to become a brand new clean version. This product includes the Microsoft CD and Activation Product Key with COA. Boxes and manuals are not included. The manual is on the genuine disk.
Model: ZAT-00124
Manufactured by: Microsoft

I can't watch YouTube videos on my brand new MacBook Pro with Lion. It says I need to download Adobe Flash Player but that won't install. Help!

I can't watch YouTube videos on my brand new MacBook Pro with Lion. It says I need to download Adobe Flash Player but that won't install. Help!

The same thing happens to me, Safari asks me to update the Adobe FlasPlayer, I download, start the installation process, ask me my username and password in order to install, then see a window where I choose if I want to always install the updates , or ask first, or not inslate updates, and at this point it is not progress, I can not cancel the process, I turn off and turn on my machine.
What can I do ..??
Regards.

Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

Hi Winterwilly,
Welcome to Apple Support Communities.
The article linked below answers your question of how to use QuickTime to record something on your MacBook Pro’s screen.
QuickTime Player 10.x: Record your computer’s screen
Cheers,
-Jason

I have a 500 gig time capsule. I have used with a Macbook. The Macbook has a 500 gig hard drive which is about 3/4 full. Now we just purchased a new MacBook pro with a 1 TB hard drive. Do I need to buy a larger Time Capsule?

I have a 500 gig time capsule. I have used with a Macbook. The Macbook has a 500 gig hard drive which is about 3/4 full. Now we just purchased a new MacBook pro with a 1 TB hard drive. Do I need to buy a larger Time Capsule?

Do I need to buy a larger Time Capsule?
Probably yes. You might be able to get the full backup of the new MacBook Pro on the Time Capsule, but it will not be long before the Time Capsule is out of space.
Better to add a new Time Capsule and backup the new MacBook Pro to the new Time Capsule, and keep the old MacBook backing up to the old Time Capsule.
If you do not want to add a new Time Capsule, another option would be to erase the Time Capsule disk and start over again with new backups of both Macs and move forward.

What cable do I need in order to migrate from Macbook Pro (December 2008) to the new Macbook Pro with Retina display?

It's driving me crazy; I have a firewire, but it isn't compatible with the ports on the new macbook pro with retina display.
Thanks for your help!

hanskra wrote:
I wish to know from Apple,
These are user-to-user forums where everyday folk post "technical" questions and offer answers to each other voluntarily. No one here works for Apple nor does Apple get involved in responding.
You can either contact Apple Care since you are still under warranty or click on the "Contact Us" link at the bottom of this website.

Just bought a new Macbook Pro with OS 10.8.2. Had windows. I have literally 1,000's of tunes in .wma. How can I transfer them or otherwise play them on new Mac?

I just bought a new MacBook Pro with OS x 10.8.2 because my PC died. I have well over 3,000 tunes and they are WMA and WAV. Can anyone help me with advice to convert them to iTunes format (MP3).

jlh775 wrote:
Thank you; I'll give it a try. I read somewhere that Macroplant Adapter worked well
Wherever you read that should be off of your reading list.
Flip4Mac works, has done for many years.

What kind of longevity can I expect from the SSD in a new MacBook Pro with Retina Display?

Hi all,
I recently ordered a new MacBook Pro with the Retina Display. This will be both my first computer and my first Mac that uses a SSD as the primary storage device. As the title of this post suggests, what I would like to know is what sort of lifespan/longevity can I expect to get out of it? My current MacBook Pro was manufactured in 2007 and has a stock 160GB Fujitsu hard drive that has been fantastic for me over the past 4-5 years. It continues to run like a champ, and I would hope that a brand new SSD would be able to last at least that long. Given that the new retina MBPs cannot be upgraded or (easily) user-serviced, I am somewhat curious to know whether or not Apple's new proprietary SSD modules will give out/slow to a crawl before/after my new machine becomes completely obsolete. I have been searching for articles published within the past few months on whether or not the current crop of SSDs on the market are more reliable than those introduced a year or two ago, but alas, I haven't had much luck. Perhaps it is still too early to tell?
I found a few discussion threads on here somewhere where some users indicated that their original MacBook Airs, or other SSD-equipped MacBooks, were still performing quite well and responsively after a few years of use. Can anyone substantiate this for me? How long have you been using your SSD(s) in your Mac(s), and do you think the newer models will be able to last several years? I would greatly appreciate any insight.

ARealMac(PPC)User wrote:
...I found a few discussion threads on here somewhere where some users indicated that their original MacBook Airs, or other SSD-equipped MacBooks, were still performing quite well and responsively after a few years of use. Can anyone substantiate this for me? How long have you been using your SSD(s) in your Mac(s), and do you think the newer models will be able to last several years? I would greatly appreciate any insight.
While I think your concern is legitimate (it was mine too), I think to some extent, how long they last will be up to you. The individual cells in the flash media in an SSD have limited life spans, and SSD controllers have a variety of techniques to spread that wear around evenly (wear leveling). That wear is exacerbated by the controller having to erase a whole block of data when even just one page needs to be changed, and if not all the data in the block is still valid, more data than necessary gets moved (write amplification). To provide some extra room for all this reshuffling of data, SSD manufacturers build in extra space that's inaccessible to the user (over-provisioning), but it typically runs about 7%. (This is a good discussion of the inner workings of all this)
If you stuff your SSD full of files, so that there's very little room to do all this rearranging, I think you'll experience the slowdown you're concerned about. TRIM, which Apple's SSD's support, will help, but you can too. Allow plenty of free space on your SSD and perhaps partition it so that there is free space outside the partition (check this out to see what a difference it can make). You can't use it but the controller can as an extension of the built-in over-provisioning.
You also mention that you "will most likely use it to record several tracks and store my growing library of songs and videos." Why not instead use an external SSD connected via USB 3.0 for storage? They're relatively cheap, very fast, and keep the space on your internal working drive free. A BootCamp partition would also take up space, so you might consider using Windows in a Virtual Machine instead. VMware Fusion or Parallels would be installed on the internal SSD but the virtual machine files could go on the external.
In any case, your data is more important than your SSD, so back up, back up, back up.

HT1338 When trying to update getting (error surle error domain error-1100). It started yesterday, any help would be great. I have Mountain Lion 10.8.1 on a new macbook pro with retina display.

When trying to update getting (error surle error domain error-1100). It started yesterday, any help would be great. I have Mountain Lion 10.8.1 on a new macbook pro with retina display.

There are many people suffering from this problem right now (including me). It appears to be a server issue. Just wait and try checking for updates again tomorrow.
Some things I have heard indicate that this may be a regional problem, though what parts of the world are affected I don't know yet. A few people have been helped by deleting the following preference file (paste the path into the Go -> Go to Folder window in the Finder to locate it), though most have not:
~/Library/Preferences/com.apple.SoftwareUpdate.plist
Note that if you are trying to download iTunes 10.7, that can be found here:
http://support.apple.com/kb/DL1576
Also, note that there is no reason to be anxious to get it, as the only thing added in iTunes 10.7 is compatibility with iOS 6, which will not be available until the 19th, and the new iPhone, which will not be available until later as well. The new iTunes that was announced is iTunes 11, which is also not yet available.

Configure New TM on a New Macbook pro with retina display Issue

I have bought a new New Macbook pro with retina display laptop (Lion moutain OS)and a new TM (2TB).
I have an internet router with wireless connect.
I plugged TM to the router with an ethernet cable.
Connect my TM to my macbook with an ethernet cable.(at this point I still cannot see TM on my Mac)
then I choose Time capsule from WiFi as shown below:
Then the airport utility (version 6.1) opened and start configuring TM but it gives an expected error when it is starting to join the TM!!!!
I have reset the TM several time but with no hope.
PS: I can configure the same TM on a normal laptop with windows 7 installed and Airport utility 5.6
I am struggling on this issue for weeks and I cannot yous TM on my macbook pro.
Help please.

Time Capsule .. TC is the hardware box you bought.. Time Machine is the software you use in the Mac computer.. so what you generally refer to as TM is really TC.. !!
I can configure the same TM on a normal laptop with windows 7 installed and Airport utility 5.6
That is great.. you do not need to setup the Time Capsule at all then. It is already setup.. forget using 6.1 utility.. it is useless toy version.
Just use it.. open Time Machine and see if you can connect to the TC drive to do backup.. and to the wireless.
From your statements..
Connect my TM to my macbook with an ethernet cable.(at this point I still cannot see TM on my Mac)
You are trying to connect with both wireless and ethernet at once.. This can mess things up. choose wireless or ethernet.. not both.
If you keep running into issues.. reset the TC.. I know yet again.
Set it up using SMB names.. for both the TC itself and wireless.
Then lock the wireless channel for 2.4ghz.. use channel 1, 6, or 11 (13 in europe) and see how it goes.

My new MacBook Pro with Retina is very slow to start

I have just bought a new MacBook Pro with Retina and surprised/disappointed at how long it takes to show the log in screen. Is this normal? It is slower than my old MacBook.

You are welcome
Many banks are Windows-centric and are concerned about blocking the Swiss cheese software holes. Apple people do not need that junk...and the overhead that comes along with it.
Barry

My brand New Macbook Pro with Retina Display is slow.

Just today I got a brand new Macbook Pro with the Retina Display. Last week I got the same one except the base model ($1300). Today I decided I wanted a much faster one with better storage so I decided to exchange it for the higher end model ($1500) with 8gb ram and 256gb ssd. When I went to speedtest.net, the results were really dissappointing. I got 65 ping, 15mbps for download speed, and 2mbps for upload speed. My previous new Macbook got a 13 ping, 20 mbps for download speed, and 6 mbps for upload speed. I've restarted my computer many times but got the same results (even with different browsers). Does anybody know why is this?

Hi gluMoster,
It's frustrating when laying out your hard earned cash on technology to find out that it just doesn't fix your issues. Fortunately it sounds to me that your issue is your network and/or internet service provider. The "speedtest" only checks your connectivity to various servers on the internet, and doesn't really test out your laptop.
For a hardware(laptop/desktop) test I recommend geekbench which can be found at http://www.primatelabs.com/geekbench/ the tools here will test your machines processor and give you an idea of your hardwares speed.
To remedy your problem I would first check your wireless router (I am assuming your laptop connects to the internet wirelessly) and see if it is atleast N capable. I see routers all the time that are B/G that get old and just can't deliver the speed that new and added network devices and websites require to function frictionless. If your router is an N or better yet an AC, then we'd need to look at your modem or your service provider. If you have ATT DSL, there have been reports, somewhat confirmed, that they are dialing down things on the DSL side in order to persuade their customers to move to Uverse, but you didn't hear that from me
If your router is ok, and the modem too take your laptop and sit it relatively close to your wireless router/access point and run the speedtest again. It could be that some new piece of furniture, or maybe even cordless phone is blocking the wireless signal to where you use your laptop most.
Best of luck,
damon

I have the new macbook pro with retina and I am trying to back up with wd passport for mac and is telling me it is going to take 7days

I have the new macbook pro with retina and I am trying to back it up, with wd passport for mac and is telling me it is going to take 7days. Any Ideas? Im afraid that means there is something wrong with my hard drive. I have verified the disk and it says everthing is ok.

It seems to be a common problem that those drives don't perform well, at least not with Time Machine.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Post the messages timestamped from then until the end of the backup, or the end of the log if that's not clear.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into a message.
Some personal information, such as the names of your files, may be included — edit that out, too, but don’t remove the context.

Connect my new Macbook Pro with Mountain Lion to my HP PhotoSmart B210

How can I connect my new MacBook Pro with Mountain Lion to my hp b210 printer? My printer is about 1.5 years old and works wirelessly just fine with my PC. I just switched to mac. The printer is supposed to be airprint compatible according to HP. HP has no software drivers for me to download. Instead they say to use Mac Software Update to get the software. However, there are no updates when I try that. I have tried adding the printer manually using it's IP address and can print a test page, but when I try to print using an application on the Mac it cannot find the printer or says the printer is in use. Help!!!

Are you sure it has no usb port?
http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/18972-18972-238444-421635-410635-4 021933.html?dnr=1
Connectivity, standard
1 USB (2.0); 1 Wireless 802.11b/g/n
The usb cable you need looks like:

New MacBook Pro with Windows 7 only - need OS X installed

Similar Messages

Maybe you are looking for