New MacBook won't boot from external disk

I have a new MacBook that I am trying to boot from an external disk that had the system from my first gen MacBook Pro. When I restart holding the Option key, and select my external disk, the system restarts again and won't let me boot from that disk. Is there something different with the OS (10.5.6) that is installed on a newer MacBook that won't allow it to boot from the same OS from an older MacBook Pro?
Thanks

Ian Patterson wrote:
golferx,
Will any other Intel Mac boot from the drive? If not, it's possibly because the drive uses an Apple Partition Map (bootable for PowerPC Macs) instead of a GUID Partition Table (bootable for Intel Macs).
To check: open to Disk Utility, select the hard drive on the left, select the Partition tab and look at the text at the bottom right corner of the window under Partition Map Scheme. If it says anything other than GUID Partition Table, you will need to erase and repartition it as such before it will be bootable.
Just a thought. Hope this helps. Good luck!
-i-
I can boot an prev gen MacBook and also my iMac (current gen). I took it to the Genius Bar and he could not get it to boot a new MacBook either and didn't have a solution.

Similar Messages

Macbook won't boot from install disks

I have tried to boot my sisters macbook the other day from her install disks so I could use disk utility to repair her disks (I think there is a problem with the block count) so I inserted the CD and held 'C' on startup and I got to the grey screen for about 10 seconds but then the computer went black, chimed again and gave me the same screen and kept repeating until I let go of 'C' where it booted from the hard drive. The problem is not the CD as I tried to boot from another leopard install disk. Anyone have any ideas? Thanks

Reboot holding down the shift key until you see the spinning cog. When the desktop finally appears (it will take a good while) launch DU and Repair Disk. Then empty the Trash. Then reboot. Then try again to boot from the (correct) OS installer DVD (not a CD).

MacBook with new HD won't boot from Install Disk

Hi there,
My MacBook's HD went on me the other day - froze computer, grey screen, flashing question mark, loud beep, etc. I bought a new HD, installed it without any problems (I thought!), but now I can't get the computer to start with the original Install Disk. On start-up, I have a light grey screen, and can hear the fan running, but that's it. At one point, on start-up while holding down the D key, I got the Language selection menu, but my cursor was frozen in the left hand corner and I couldn't do anything but restart. Now nothing comes up or else I get the "You need to restart your computer...." message on a grey screen.
Any ideas how I can get the Install Disk with Disk Utilities to work?
Thanks .....
Message was edited by: jomimata
Message was edited by: jomimata

Unfortunately, it sounds like you have a hardware problem beyond the hard drive. Even if there was no hard drive installed at all, you should still be able to startup from the the original install disk. Do you hear a "chime" at startup? If not, then you definitely have a hardware problem. You should take your MacBook into a local Apple store and make an appointment with the Mac Genius (or another local Apple Authorized Service provider). If you can't startup from the original install disk by holding down on the "c" key or holding down on the "option" key and then selecting the install disk, you have a hardware problem that can't be resolved with troubleshooting here.
-Doug

G5 gets grey screen with logo then goes black, won't boot from any disk

Won't boot from any disk, already changed VRAM battery, no success. tried hardware disk once and ran a full scan, said error with Video, but now won't boot at all with any disk. Screen is choppy also(have pic). Thinking video graphics card? Not sure. Need help!

Hi bribiel, and a warm welcome to the forums!
It certainly sounds like the Video card from the little info we have, & that can certainly cause it to fail to bootup.

Ibook g4 won't boot from install disks

Got an ibook g4 1.33 ghz combo drive from original owner w/install disks. I want to reinstall original system but it won't boot from install disk 1. Tried starting holding down c but ignores disk. Holding down option just gives me the HD. Install disk shows up on desktop and opens. Tried disk utility from install disk but it doesn't allow me to erase the hd. Is there anything else I can do? Thanks.

OK, so let us suppose that you have the correct disk, the possibilities are:
• the optical drive is not functioning properly. However, since the disk shows up on the desktop the drive is apparently reading it.
• the disk itself is the issue. It could the wrong disk, but let us assume it is not. It could be damaged so that it is no longer bootable, or it could dirty. I would begin by giving the disk a good buffing and see if that will encourage it to boot the computer.
Good luck.
cornelius

MacBook won't boot from new hard drive.

I'm trying to upgrade my hard drive, but my macbook will not boot to the new hard drive. I have erased and cloned the hard drive about three times now, using both Carbon Copy Cloner and SuperDuper. It won't boot while it is in the macbook and it won't boot from an external hard drive case. All I get to is the screen with the mac logo and the spinning wheel. I have made sure the drive is GUID formatted, but it still doesn't work. When I put the new drive in an external case and plug it into the USB port of my macbook I can see and access everything on the drive. Can somebody please tell what I am doing wrong?
By the way the new hard drive is a 500gb western digital Scorpio blue drive.

I got a new hard drive recently 500gb seagate. I followed the directions on this page http://www.ehow.com/how2063795format-hard-drive-mac-os.html , Mine was a little more complicated since i had 2 partitions windows and mac on mine. Initially the process took a day and it started getting to the same thing as yours where it would get to the mac logo and not find the hard drive. I reformatted several times before i got to the point where i could boot up.Eventually I just figured out all the info was there the drive was formatted i could boot into windows 7 but not mac. So i put old hard drive back in the computer booted up with that. Attached new hard drive via usb in external case i was trying to put in the mac. I was able not to boot up but it would show the drives that have been formatted into the new drive and i simply copied my existing Disk by dragging it onto the new hard drive. Than turn off your mac keep your hard drive plugged in. Press and hold the option key in start up and you should see the 2 seperate hard drives and be able to boot into the new one. Was a long process for me took several complete deletes of the new hard drive and reformatting before it would work. once you get to the mac logo and spinning wheel its just saying mac cant find your boot up disk though. Sorry its confusing a bit any questions email me.

New HDD installed in PowerBook G3, won't boot from installation disk.

I just installed a new hard drive in my G3 Wallstreet and I can't get it to boot from the original Apple CD.
I've tried holding the C key as well as +⌥+⇧+⌫, but to no avail.
The CD tests fine in my old iMac G4, so maybe the culprit is the optical drive, but then again, I'm not so sure.
Is there a way to either boot my PowerBook or install OSX from my iMac G4?
Message was edited by: rick268 Also, I can boot into Open Firmware just fine.

Thanks for your help.
WeLoveMacs wanted $50, but I just scored an entire topcase on eBay for $15, shipped. We'll see what happens.
Allan Jones wrote:
I maintatined three Wallstreets for a friend for years. They stayed in regular service from new until he replaced them with MacBook Pros last summer!
In the years of keeping the old soldiers almost relavent, I ran into a "won't boot from a system disk" issue on two of them. In both cases, replacing a dead PRAM battery fixed the issue. Don't ask me why but that was the only thing that fixed them.
When I was supporting those, you could still get new Wallstreet batteries from Other World Computing. Today they no longer show them. I'm not sure where to steer your for a new one. USed batteries are like used chewing gum, IMHO.
You can try disconecting the wire from the PRAM battery to the logic board. That might help. Requires some take-down:
http://www.ifixit.com/Device/PowerBook_G3_Wallstreet

Macbook pro cant boot from external dvd device please help !!!!

hello everyone please help me i have macbook pro 2011 core i5 version
i just installed 2.5 ssd as second hdd
i cant boot from external dvd device to install any os the external dvd keeps on spining and mac is just thinking it doesnt show press any key to install
it shows the device when a boot into mac parition
i am trying to install windows on origianl 500 gb hdd and linux on ssd
but not luck
the external dvd drive works i pluged into my pc and it works
please help thansk in advance
200 gb mac
300 gb windows
120 ssd linux

I do not know about Disk Warrior but if you have a compatible OSX on an external HDD you certainly can boot the MBP. Use startup manager:
https://support.apple.com/en-us/ht1310
Ciao.

IBook on 10.4 won't boot from Install Disk

Hi - Somewhere along the line I lost DiskUtility from my iBook running 10.4.11. I thought I could run it from the Install Disc but I find the iBook won't boot from the Disc and DU won't run from the Disc (when I do manage to track it down there).
I have install discs from a G4 Powerbook and a MacBookPro Unibody but I'm concerned about repairing permissions from the wrong version of DU (even if I could get the iBook to boot from those discs). Is a newer disc OK? I want to run or install DiskUtility. What are my options??
How can I get the iBook to boot from its install disc?
TIA your expertise...
j2

The installers are machine-series specific. And the Intel disc won't work
in the PPC Mac, additionally. If you have the correct disc for that iBook,
then you can boot the computer with the disc inside the optical drive
and hold the C key down, until Installer appears on the screen; a second
screen after the initial language screen has a full menu bar and Installer
in the header; options appear in the drop-down menu lists, Disk Utility is
among utility and other features listed in there.
If you do not have an iBook G4 disc or an OS X disc retail version capable
of doing the job, you really should get the correct disc. In a few instances,
another path may work, but is not recommended. And you could lose the
content of the hard drive in the computer you are hoping to save.
However, you may be able to use Pacifist to get Disk Utility from the PB G4
installer disc to be made available on the desktop of the iBook, and use
Pacifist to install that extracted package item from the other PPC install disc.
This does not use the installers on the disc media, so Pacifist is used to do
the process. The iBook ideally needs a replacement disc set, and that may
be available from Apple online store's sales support (see online phone#)
and the product would be matched by serial number. A fee is involved.
The original software disc set would have the correct Apple Hardware Test
and the software kit as included when the computer was new.
If Tiger did not ship with the computer in question, then a full retail disc 10.4
installer could probably be used; since it would be newer than, say 10.3.9.
In natural progression, the newer disc of correct kind & type supported by
the computer is a possible path; however a Leopard disc won't help fix Tiger.
You could also use Disk Utility in one PPC Mac, via FireWire Target Disk
mode, to repair the drive of the iBook. It would only appear as a hard drive.
So, repairing disk permissions would not be possible, on a non-boot volume.
This, only within limits; differences in build versions of OS and custom installs
done to a computer configuration may make doing so very limited. I would
not expect an Intel-Mac's version of the same OS to help a PPC in any way.
Good luck & happy computing!
{ edited 2x }

Satellite L850-161 won't boot from recovery disk

When I got the laptop in 2012 I created 4 recovery disks but since then i've had my HDD replaced in my SATELLITE L850-161 but it has the recovery partition with nothing in it and the laptop won't boot from disk either so I can't format it but really need to, any suggestions??

If you have 4 recovery discs be sure you start installation with disc number 1. After HDD exchange you should be able to use created recovery discs for recovery image installation.
Does some other bootable disc starts properly?
To be honest I dont understand how new HDDD can contain recovery partition that will be created if recovery image installation works.
Problem is that in such situation you dont have many options. In worst case you can order original recovery disc for your machine.

Tiger won't boot from external firewire

Installed 10.4.3 DVD on clean external firewire (Extended/Journaled). Before I installed Tiger, I ran updates, and repaired permissions. Everything looked good to me.
I'm keeping Panther on main system drive for now - so from System Preferences>Startup Disk>the external tiger drive appears and I select it. Then I select restart and the promt confirms that the computer will restart with 10.4.3. Looks good so far.
After restart, I'm looking at the desktop, guess what? It's 10.3.9, not 10.4.3. How could that be?
Also, when I restart and hold down the Option key for Startup Manager options - the firewire drive does not appear as an option.
So Tiger appears in System Preferences>Startup Disc as an option, but the option doesn't actually work, and that drive does not appear at all in (Option key) startup manager.
I'm Indexing the firewire drive now (OMG is that slow or what!), but I'm not expecting this to make any difference. I'm stumped. What am I overlooking? Please advise.
Muchas Gracias

R MacCool,
"What if I manually drag and drop the 4 folders (from the Tiger DVD) onto a second internal SATA drive without partitioning the drive first? Will I be able to boot off an internal SATA drive like that? When I installed Tiger on the external firewire I see that 4 folders are there - I could drag them from that drive onto the second internal drive. Does that work?"
No, this does not work. MacOS X consists of more then 20,000 invisible files, most of them somehow connected and referencing each other.
MacOS X DOES boot from external firewire drives, both hard disks and DVD drives.
Why don't you just upgrade your current 10.3.9 to Tiger using this procedure: 10.4 Tiger Upgrade: Decision tree+Checklist?
"Why does Tiger seem to install correctly, then System Pref>Startup Disc recognizes it, but then after selecting 10.4.3 it restarts into 10.3.9?"
I am not a technician, but it could be that the firmware is the primary source for connectivity. After MacOS X has booted the internal firewire drivers might take over and "overrule" the firmware (this is why you can see it in the startup disk preference pane) but at boot-time it exclusively depends on the firmware. This theory might be completely wrong though.

G3 won't boot from external drive

Hello.
I really have a big problem, namely:
My son (3 years) turned the power adapter to 120 instead of 240, which explode.
I changed it. But when I tried to start up again, the Power Mac couldn't find the HD. I tried everything but but nothing worked. So I installed Mac OSX 10.4 on a external firewire drive. But I don't know how to boot from this disk.
Please help me.

so the machine can still boot?
try this: open the case, there should be a button in the far right corner, like around the video card. press & hold for 15 seconds.
check all the cables. make sure everything is still plugged into the drive.
power up & see what happens.
are you using a pc computer in the mean time?
I can convert the dmg to iso you can burn using a pc utility, but I'm at work & 7 hrs behind you.
http://www.macosxhints.com/article.php?story=20040121135301830

IMac 20" won't boot from AppleCare disk

Hello all,
I have a new (1.5 weeks) iMac iSight 20" and am thrilled with its performance (it does not have any noticeable noise, nor does it have any dead pixels). I have tried to boot it from the AppleCare disk (the one with TechTool on it) but it will not boot. I have used that disk to install TechTool successfully on the iMac HD, but it will not boot from that disk. The iMac will boot from the OSX install disk that came with the iMac, and I have done so in order to run repair permissions before and after updates. Is there something easy I'm missing regarding booting from the Applecare disk? I'm not new to Macs, but I am new to iMacs and OSX. Any help is greatly appreciated.

Hello all,
Acting upon the advice I received here, I called AppleCare. Although it took 32 minutes, they did finally agree that the issue was with the AppleCare disk, and they are sending me a new one. I did note one interesting thing. I visited MicroMat's web page to see what the most current version is of TechTool Pro, and it is 3.0.4. That is the version on my current AppleCare disk. I guess the incompatability must be with something else on the disk. Thanks for all the prompt replies and great advice.

Yosemite won't Boot from External SSD with Firewire Connection

Seeking help, I boot from external SSD drives from my 2010 iMac. I recently installed Yosemite on an External SSD with a firewire connection and all went well with the installation and first boot. After completing set up and restarting my iMac Yosemite will no longer boot from the firewire connection it will boot to the loading bar and then get the dreaded Goest Buster Emblem, if I swap out the SSD to USB connection it boots normally. I have 6 SSD Drives with Mavericks and Lion installed on that will boot from the Firewire Connection. Any suggestions ?

Additionally when testing while the SSD is connected to a USB Connection and booted if I attach any firewire device they are not recognized or connected to the operating system.

My Macbook Pro won't boot from External HD

Could anyone out there, maybe Ned or Peter who helped me last time tell me why it wont boot from an image i have loaded onto the HD?
I managed to restore the image onto the HD using disk utility but when i press the power button and hold down 'Alt' i get a blank screen and a repeat of my start up chime and then all the fans activiate
any ideas?
Thanks
Danny

Hey...
I dont know if its the same problem im experiencing... But a couple of day ago i got a brand new macbook pro.. and wanted to restore my os to the state that it was in when i last backed up using superduper... i then plugged in my lacie firewire drive and rebooted pressing down the alt key.. then i was given the choice of booting my backup and i chose that.. but then nothing happened, it just hung at the gray screenn... I later tried to boot it on my girlfriends macbook and it worked fine there.. So i dont know if something is wrong with the macbook pros firewire port..
Hope this helps in some way..

New MacBook won't boot from external disk

Similar Messages

Maybe you are looking for