New MacMini won't boot USB

Good day!
I am posting again about the same computer to see if there is an answer for me out there.
I have a new MacMini without the optiocal drive. This is a computer that someone tried to put Linux on and left it was a 100gb partition for the MacOS and the rest for the Linux installation. I want to get it back to one large partition.
I know that I need to get the computer to boot from something else because the Recovery partition is on the HDD. To that end I have tried to boot this from an external USB DVD-RW drive and when it starts to boot from the disk it reads the DVD and then goes to the 'circle/slash' screen. I then made a USB drive bootable and restored the dmg file for my Lion disk to it and tried to boot from that. It shows in the options and then immediately goes to the 'circle/slash' screen.
I tried to flash the PRAM and got the same result.
I tested both items on another MacMini and they work. The test computer was a previous model with the optical drive.
If you have anything that could help I would appreciate that.

BDAqua wrote:
Get a Firewire cable... assuming they haven't removed FW from the Minis now too.
Put the Install DVD in the the other Mac, shut both down, connect with a Firewire cable, boot the other Mac holding the t key down, once the floating FW symbol shows up, boot the this Mac holding the Option/alt key down, eventually the Install Disk will show as a Boot Option on this one.
If you can get use of that other Mac, use FireWire target disk mode...
http://support.apple.com/kb/HT1661
Yes the 2011 still have Firewire.
BigRobOk, wow someone really did a number on that MacMini -- I remember your other thread about repartitioning.
I suggest then you follow BDAqua's advice since you have an old Mini hand. That is, you want to put the new 2011 Mini in Firewire Target Disk mode, so it appears as an external drive to the old Mini. Boot the old Mini from the Install DVD that you made, which the old Mini is ok with. (BDAqua said this already.)
Since you've had issues before with the 2011 new Mini's HD, in particular the partition scheme, I suggest that you launch Disk Utility and erase/repartition the drive. Remember to check and verify that you're using the GUID partition type on the HD. I tend to see that in "Partition" tab, "Options" button.

Similar Messages

New HD won't boot internally; fine externally

I'm trying to swap out the hard drive on my wife's late-2008 Macbook with a new Western Digital hard drive (regular style, not a solid-state drive). Cloning the drive with Carbon Copy Cloner seems to have worked fine (including the hidden Recovery partition) as it can be booted from in an external USB case on startup. The problem starts when I switched out the old drive and placed the WD inside. All of a sudden the Macbook won't boot up and I get the flashing folder icon instead. Switching the drives back and everything's fine; I can again boot up from either drive by holding the option key on startup.
I've read that some older Macbook Pros have an issue with SATA II data transfer rates and need to be slowed down from 3.0 Gbps to SATA speeds of 1.5. Unfortunately, it according to WD's site you can't do that with WD's 2.5" drives, only their 3.5"s. I've tried it anyways with a jumper and it doesn't seem to work for me.
I've also read elsewhere that there is a limit to the size of the drive that can be placed in: 500 GB. The drive I bought is 750 GB, so if this is true, that could be what the problem is. However, I can't find any mention of this supposed limitation anywhere on Apple's site. Does anyone have a reputable source for if this is true for this model of Macbook?
Late 2008 13 inch Aluminum MacBook running Lion
Western Digital Scorpio Blue (WD7500BPVT) 750GB SATA 5400 RPM 8MB Cache 2.5" Laptop Hard Disk (OEM)

Hi Dave, I am having the same issues with a WD Blue. Thanks for your suggestions, but doesn't work for me.
When the WD is in the MBP (15" 2010 Unibody), and I boot from an external HD, firstly the MPD says it can't recognise the WD and offers me the choice to Initialise, ignore or eject. I select initialise and disk utility reports that there is only a FAT partition of 58.2 GB on the WD. Err?
When I put the original HD (an ST950032 500GB) back in the MBP and boot off it, all is fine. I then put the WD in an external exclosure, and the MBP sees it fine and Disk Utility correctly reports a MacOS Journalled GUID partition of 465.8GB.
All the data is there (from doing an earlier clone). I just can't boot off it - weird.
Surely there is a fix for this? Have tried all the SMC / PRAM reset stuff.
The box even says that the WD Blue is 'Suitable for all operating systems (except XP) out of the box". How can you be sure that a drive you but will work in a MBP before you spend your money?
Help? Glum

Lenovo s650 won't boot, USB doesn't work

I bought this phone and installed a root app. I may delete some system files with root app. Since that, the phone won't boot. I tried Smart Phone Flash Tool but the Firmware won't be updated as USB doesn't work. What can I do at this point? Please help!

Hi fiddlehead53 (my fingers hurt)
What Windows version are you using?
For XP/Vista/7 Follow message 7 of > https://forums.lenovo.com/t5/Lenovo-Phones/Lenove-S650-sound-issue/m-p/1413747/highlight/true#M3660
PS.''MT65xx Preloader'' will pop just for a short time so you'll have to be quick !
Let me know how it goes.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

New machine won't boot

I've had this new machine up for about a week and a half, and all of a sudden it started hanging (freezing) on me tonight. Other than the drivers, utilities, etc. that came w/ the various hardware, I haven't installed much software: Office 2007, Firefox, AIM, and one game (TimeShift). Everything was working great until tonight. Except I had noticed that when I left the machine for a while and it went to sleep, when I tried to wake it up by moving the mouse, the screen would come up w/ my background and nothing else. I would have to reboot to get it going again. Tonight it all escalated. It first hung when I was using Firefox. Next time it was after I saw a brief message about an 'access error' on the raid mirror. I then went into the nVidia Control panel, and it froze again. No response from the keyboard or mouse at all. Sometimes, the mouse pointer would disappear completely, and w/ still no response from the keyboard I'd have to reboot. The last time windows was up, I tried to see if the game would start - it froze again. After I pressed the reset button that time, it has not booted again.
I'm using the software raid (Raid 1 mirror), and it says the mirror is "healthy". I can get into the Raid Setup and everything looks fine. But when I get past the post, right when you're supposed to see the Windows moving bar, I hear a faint 'click', and then nothing - black screen. I can also get to the BIOS just fine, and nothing appears to have changed. It's possible that one of the hard drives is bad, but after all the trouble I had trying to get Raid to work on this board (cold boot issue, etc.), I also think that the board may be suspect. I guess I will try disconnecting one of the drives, and see if it will boot off of one or the other. But I would sure appreciate any other suggestions too!
TIA

Quote from: drachenfire on 09-February-08, 14:27:20
Well, I found I can boot off of the first drive (slot Sata 1), but not the second (slot Sata 2). So I guess it might be the hard drive which is having a problem. The odd thing is, that when both drives are plugged in, it won't boot. If I disconnect the second one it will boot. I thought that was the purpose of mirroring - if one drive went bad, it would boot off of the good one, and then you replace the bad one and rebuild your mirror. Perhaps that means there something wrong w/ the nVidia raid?? I've never used raid before on a machine, so I don't have any experience with this sort of thing. Any suggestions would be greatly appreciated!
No, the mirroring means you have a safe copy of your data, you will still need 2 disks........

New X2270 won't boot OpenSolaris 2009-06 from internal disk

Is anyone having any problems with recent X2270 servers? I took delivery of two of these last week. They are without the ILOM card because Sun are having quality issues with them - a firmware bug I believe. They are fun to install as my only eyes is via a serial port that seems to have some kind of bios video text to serial ascii emulation which has quite a delay on it.
Basically after installing Solaris it won't boot from the internal disk. So far I've tried net installs of SXCE b105 and also the latest OpenSolaris 2009-06 and in both cases the install completes correctly without any errors (that I've detected) but after rebooting they fail to load the kernel. Here is what's left on my serial console:
Press F2 to run Setup (CTRL+E on Remote Keyboard)
Press F12 if you want to boot from the network (CTRL+N on Remote Keyboard)At this point the hard drive activity light flashes twice and then the machine appears frozen. The Solaris banner is never shown. I've left it like this for hours just be sure.
I've chosen ZFS for the whole disk in both instances. I wonder if this has something to do with it.
Presumably OpenSolaris has the drivers for the disk interface cards otherwise it wouldn't have been able to install onto the disks.
Any advice greatly appreciated.
Kind Regards
Jesse

The solution for my problem was reinstalling linux-firmware & linux. Maybe this can help you too.
I have booted from a live cd and doing these steps:
RAID Array scan
mdadm --examine --scan > /etc/mdadm.conf
RAID Array start
mdadm --assemble /dev/md1
mdadm --assemble /dev/md2
mdadm --assemble /dev/md3
mdadm --assemble /dev/md4
LVM scan & aktivieren
vgscan
vgchange -a y
Mounten von „root“ & „boot“
mount /dev/mapper/root-root /mnt/root/
mount /dev/md1 /mnt/root/boot/
In „chroot“ wechseln
cd /mnt/root/
„dev“, „proc“, „sys“ einbinden
mount -t proc proc proc/
mount -t sysfs sys sys/
mount -o bind /dev/ dev/
Nun / ändern
chroot ./
Reinstalling packages with
pacman -S linux-firmware linux
May I could help you
jesus loves you

New Air won't boot after failed Migration

New MacBook Air arrived this afternoon.
First thing I did was run Software Update to apply the lates OS patches.
Second thing I did was run Migration Assistant to transfer data from a Time Machine backup on an external USB disk. The old computer was small. Backup is only about 25GB. It is from a MacBook running Snow Leopard.
After about half an hour of running, Migration Assistant reached the "less than a minute remaining" stage and hung there for more than an hour. Finally I quit it. My computer then became unresponsive. I had to hold down the power key and restart.
Computer won't restart. Bong is heard, Apple appears, spinner appears, no progress after that. Unplugged the external disk, rebooted, same thing.
I rebooted to the recovery partition and ran Disk Utility, did the integrity check and the permission repair on the main volume, no improvement.
Finally I gave up and started the Reinstall Lion option. I'd read about this, figured it was something I might need someday, never imagined I'd be running it within hours of getting the computer. Display says I have 5 hours and 45 minutes to wait.
What went wrong here? What should I do when it is done reinstalling? I'd like to have my old stuff back, but I don't want to kill my computer again.
Frank

For what it's worth, booting stops at the "Waiting for DSMOS" step.

NF750-G55 New Build Won't Boot to DVD

I'm doing a rebuild of a system in which the old motherboard failed. This is only the second time I have done a build, so forgive any apparent ignorance. The following describes the system: Motherboard: MSI NF750-G55, CPU: AMD Athlon II X3 450, PSU: Hiper Type R MkII 880W, Case: Antec Three Hundred, Memory: Rendition by Crucial 1 X 4GB, Hard Drive: Seagate 400 GB, DVD: Samsung 22X SpeedPlus. Only the case, PSU and DVD come from the first build I did 18 months ago and were fine until the old MOBO failed.
The problem I'm encountering with the new MSI NF750-G55 is booting to the DVD so I can load Windows Vista onto the hard drive. The POST gives me a Bad CHKSUM error and directs me to bios setup. In setup, the Boot Sequence shows my DVD and hard drives as disabled and won't let me enable either.
I've uninstalled everything, cleared the CMOS and reinstalled everything five times. Nevertheless I am still getting the same error message and can't enable either my DVD drive or hard drive. Therefore, I'm unable to successfully boot up and load windows onto the new hard drive.
I'm out of ideas and ready to return the MOBO to Newegg for another, but I would rather fix the problem. Does anyone have any ideas as to what I can try next before I ask for an RMA?
Thanks in advance for any help you can provide this newbie.

Quote from: Pixy on 16-April-11, 04:24:53
I've tried loading defaults (both optimized and fail-safe) in bios setup as well as by using F2 in the chksum error screen. All result in a screen that looks like this:
The text that is obscured in the upper part of the screen reads:
BTX loader 1.0 BTX version is 1.01
Console: internal video/keyboard
Bios drive C: is disk 0
Bios 636kB/2030208kB available memory
Once in that screen, the only way out is to unplug the PSU and reset the CMOS.
As I said before, I'm stymied and have no idea what to try next.
Quote
Once in that screen, the only way out is to unplug the PSU and reset the CMOS.
do not do this, just hit reset button then press F11 during BIOS post screen and boot from your optical drive.

New MacBook won't boot from external disk

I have a new MacBook that I am trying to boot from an external disk that had the system from my first gen MacBook Pro. When I restart holding the Option key, and select my external disk, the system restarts again and won't let me boot from that disk. Is there something different with the OS (10.5.6) that is installed on a newer MacBook that won't allow it to boot from the same OS from an older MacBook Pro?
Thanks

Ian Patterson wrote:
golferx,
Will any other Intel Mac boot from the drive? If not, it's possibly because the drive uses an Apple Partition Map (bootable for PowerPC Macs) instead of a GUID Partition Table (bootable for Intel Macs).
To check: open to Disk Utility, select the hard drive on the left, select the Partition tab and look at the text at the bottom right corner of the window under Partition Map Scheme. If it says anything other than GUID Partition Table, you will need to erase and repartition it as such before it will be bootable.
Just a thought. Hope this helps. Good luck!
-i-
I can boot an prev gen MacBook and also my iMac (current gen). I took it to the Genius Bar and he could not get it to boot a new MacBook either and didn't have a solution.

10.3 Server new install won't boot from Mirrored RAID - HELP!!

Hi all,
I had 10.3 Server running fine on a 450 MHz B&W G3 (home server use, nothing too demanding), when I decided to add a 2nd HD and run the server from a RAID mirror (both 80GB drives). I had problems enabling RAID on the boot drive with diskutil in Terminal, so I decided to rebuild the server. I didn't have much besides the system on it, so backing up data and re-installing isn't a big ordeal (or so I thought).
No problems creating the mirror set once I re-formatted the drives. The install seemed to go fine (10.3.4 on install disk), but upon restart, I got the flashing system folder/question mark. When booting from the install disk, Disk Utility recognizes the RAID, and Startup Disk recognizes the mirror as a viable boot drive and allows me to select it and restart. Same problem, no system found.
When I run diskutil info for the mirror, it lists the mirror volume as Not Bootable.
I've checked the disks with both Disk Utility and DiskWarrior - all looks OK. I've reset PRAM and NVRAM, taken out added PCI cards, and disconnected all FW and USB devices (besides kbd and mouse).
Unfortunately, B&W G3 can't boot from an external FW drive, so I'm stuck with booting from a CD/DVD for troubleshooting.
My next step is to re-install on a single drive again and try to enable RAID and mirror, but I'd sure like to avoid that if I could.
I've searched through this board and didn't really see this particular situation. Any of you smart server folks seen this before -- any ideas or suggestions??
TIA,
Brad
B&W G3 Mac OS X (10.3.4) 450 MHz, 10.3 Server, 80GB RAID mirror

if you backup your data from a NON-RAID Drive (Single drive), create a RAID array and then Restore from the backup you created... you will find you cannot boot from the drive.
Apparently the sector or drive header information in a non-RAID drive is different than in a RAID array... so when you restore the backup data from the non-RAID drive to the new RAID Array; you effectively corrupt the RAID array not allowing it to be booted from.
The solution is to create the RAID array and then re-install your system from scratch... copying over the data you want to keep from your initial backup one file at a time (don't do a complete system copy or you will once again, corrupt your new RAID install).
I had the same problem and it took me a great deal of time to figure it out.
Joe

Migration Assistant crashed new iMac, won't boot

I bought a new i3 iMac and skipped the migration assistant initially. Things were going fantastic, I imported and built a new iTunes library, iPhoto library etc.
It is running 10.6.6.
Then last night I decided to use Migration Assistant to move things from old Intel MacBook (running 10.5.8). As the migration was going to be something like 20-30 GiG's, I unchecked everything except Applications, and a few select folders from each user account (Documents, Desktop, Pictures, Movies). Since one account had the same name as the account on my new iMac, I asked Migration Assistant to rename the old account. I then went to sleep.
When I woke up, iMac screen was black and would not wake up from sleep. Old MacBook tells me that the connection was dropped.
I had to depress power button to force shutoff. Upon restart, at the apple boot logo, all I get is a message saying the computer has to be restarted, which appears in multiple languages. There seems to be nothing I can do to get it to boot.
Help?

elvenkind wrote:
I bought a new i3 iMac and skipped the migration assistant initially. Things were going fantastic, I imported and built a new iTunes library, iPhoto library etc.
Hi, and welcome to the forums.
That's likely a complication. You'll now have an extra user account with that stuff in it, and the account(s) you transfer won't have permission to it.
I had to depress power button to force shutoff. Upon restart, at the apple boot logo, all I get is a message saying the computer has to be restarted, which appears in multiple languages. There seems to be nothing I can do to get it to boot.
That's a *kernel panic.*
They are usually caused by hardware problems, but can be software.
Try running this: [Apple Hardware Test: iMac (Mid 2007) and later models|http://support.apple.com/kb/HT1883]. Run the Extended tests.
and the (free) Rember, a heavy-duty memory tester, from: http://www.kelleycomputing.net/
If that doesn't help, start with this Apple article: [If “You need to restart your computer” appears|http://docs.info.apple.com/article.html?path=Mac/10.6/en/8965.html].
Once you get it started, check the transferred user accounts; most likely, the transfer was incomplete, and you'll have to delete the partial accounts and run the Migration again.
If your Apps were only partially transferred, just select them again -- Migration Assistant will just skip any that already exist on the new Mac. The only problem you might have is if it was in the middle of transferring an app when it failed; in that case you may have a partial copy of the app.

MacMini won't boot anymore, usual procedures don't work

My MacMini froze when updating from 10.10 to 10.10.1
Rebooting showed the no access sign.
I thought no big deal, but via the normal procedures (recovery mode including internet recovery mode, safe boot etc.), still no boot just a white screen.
I made a bootable Yosemite USB stick and tried to boot from that, I get a bit of the timebar then white screen forever.
I removed the hard disk, installed it into a different Mac, formatted, installed a clean Yosemite and made sure it would boot on that Mac.
I put the hard disk back in my Mac mini and still get the 'no access' sign!
I installed a different hard disk (an SSD) in an USB enclosure, again formatted and installed Yosemite at the other Mac, made sure it would boot, it did.
Tried it plugged in into my Mac mini USB port, again white screen with 'no access' sign!
Basically it's like it is cursed. Any ideas? (Obviously please avoid key-pressing suggestions such as CMD+OPT+R, SHFT+CMD+V, SHIFT, D, CMD+R, CMD+S, OPT+CMD+P+R, ALT/OPT etc. since I tried them all before formatting the hard disk on the other working Mac I own, I even removed the battery from the logic board).

Try using a wired KB if yo are using a wifi/BT one.
Try resetting the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Try running Apple Hardware test if you can
Using Apple Hardware Test
If this Mini has FireWire and yo have another Mac with FW, try booting the other Mac in Target Disk Mode and see if you can boot from the Mini using the Optiion key
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

New drive won't boot

Hi and thanks in advance,
I've installed a seagate 320 g drive in my T60. I used a usb 2.0 to serial ATA cable to clone my original 100 g Hitachi drive after booting off a cd in the ultradrive bay. Before cloning, I disabled IBM Predesktop Area in the bios setup. After the clone finished, I reset the Predesktop Area to normal and then tried to boot from the new Seagate. The system hangs up with a completely blank screen, cursor blinking in the upper left corner, after the Lenovo spash and before windows.
I updated the system bios about two months ago.
I don't know whether having this driver: system32\drivers\Shockprf.sys installed may create incombatability nor how to uninstall Shockprf.sys to test this.
I am not sure what to try next.
Neil
Solved!
Go to Solution.

When you image with Ghost you need to use the -ib switch in both directions in order that you capture the four boot sectors. Have a look at this thread and this one, hopefully they will provide the needed information.
The setup with the drives where they were is correct.
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Brand new iMac won't boot :-(

Hi All,
I just got a brand new iMac. I did a clean install of Leopard, imported a couple of CDs into iTunes, and then thought I'd give Bootcamp a go.
I created the disk and the machine duly rebooted into Windows setup. As the installer couldn't see the Bootcamp partition (I was using XP without SP2). I told the installer to quit and reboot.
Now all I get is a hanging white screen when I power up my iMac. If i hold down the Alt key I get a mouse pointer which locks up after a couple of seconds and that's it.
I've tried:
- Holding down alt on bootup - this brings up a pointer which locks after about 2 seconds
- Holding down alt+C - with Leopard in the drive - nothing happens
- Zapping the PVRAM - AltCMD+PR" - this had no effect
- Resetting the SMU - hold down power whilst plugging in - now all the fans are running at maximum speed
- An open firmware update as per this post:
http://discussions.apple.com/thread.jspa?messageID=5984118
Is the machine completely toast?

The same thing happened to me this last week. After talking to Apple on the phone for hours they decided that it was dead and declared it doa (even though it was working for a few hours before boot camp). I am getting my new one this week. I can promise you that boot camp will not be put used on this one.
-Billy

PT880 New system won't boot to any drive

I am putting together a new system:
Case: Aspire X-Superalien
Power Supply: 500w (came w/case) which says:
AC INPUT: 115V/230V~ 10/5A 50-60HZ
DC OUTPUT: +3.3V +5V +12V -5V -12V +5VSB
28A 30A 34A 0.3A 0.8A 2.0A
+5V +3.3V COMBINED LOAD: 200W
+12V +5V +3.3V COMBINED LOAD: 480W
TOTAL POWER: 500W
(no idea what all that means, but you guys seem to)
The PS also has 2 blue 80 mm lighted fans
Motherboard: PT880 NEO LSR
Processor: Intel P4 2.8 GHZ 800MHZ bus 1MB L2 cache (HT) Prescott
Video Card: GeForce 2 MX400
Disk Drives: Western Digital 200GB hard drive (formatted on another computer,
no OS yet)
LiteOn DVD rewritable drive
Mitsumi 3.5 in. floppy drive
Operating System: none yet, will use Windows XP as soon as I can get to my
drives.
I can get to my BIOS. All my drives appear in BIOS and show up as the correct slave, master settings. I have disabled all the SATA RAID stuff. When I try to boot up, it does a memory test, lists all my drives and stuff...then freezes. I have tried changing the boot up order of my drives into all possible orders. The four lights on the back give me different messages each time. Nothing consistent there. What could be keeping me from booting to my drives?

Your PSU looks to be quite capable of handling a Prescott, so as Raidahs said, all you need is the BIOS flash. I asked you for your rail by rail currents in another post, but as I see them here, never mind. Unfortunately, since Intel kept making changes to the Prescott, the earliest BIOS that will run the Prescott for this board is v1.4. The boards are shipped with v1.1, which is rather aggravating. If you don't have access to a Northwood chip (P4 with 'C' after it's speed, ie. 2.8C), I would suggest contacting either MSI or whoever you purchased your board from, and ask them to update your BIOS. Do not let them talk you into paying for this service, as the board's packaging plainly states that it is designed for the Prescott, despite the fact that it does not support it out of the box.
If you have any problems, just let us know. Heck, keep us posted no matter what happens

Re: KT6V New system won't boot.

Similar problem here...
I got new (bought in one week) KT6V, installed Sempron 2500+ and 256MB DDR400 but I never boot it successfully.
No video signal seen in monitor, monitor led always stays orange. I removed all PCI card and also unconnect HDD and CDROM powers to test, but it is same...
I donot know what the problem is, and donot know what I can do next
Because of the no screen, I donot enter BIOS, I checked many times my video card...It's tested on another machine, no problem with that...
Waiting your comments urgently...
Thanks...

SaVaTaGe: "...MSI K4AV
AMD Athlon XP 2000+
128+256 SDRAM 133Mhz
With 300W Power..."
Your Mobo isn't the same of first post, so it's possible you could get wrong or less advises than you could get with a new post. Also, it seems that you named it wrong: Shouldn't it KT4AV ? Your'e using 2 Difs. memory. Better take the 128 out at least during troubleshoot. 300W P.S. may be too poor, that's why you have beeing asked to tell it's specs.
Off Topic: Grayone: Remember what I said ?

New MacMini won't boot USB

Similar Messages

Maybe you are looking for