New magic mouse and new rechargeable batteries aren't at %100....

Hi, my new rechargeable batteries and charger aren't showing that my batteries are anywhere near %100 powered. I've let the batteries charge overnight and when replacing them in both the mouse and the keyboard they've shown at max 75% battery level. What's up with that?
Also, this is the battery kit from Apple.

that's completly normal because rechargables don't work the same way as batteries do. 75% is a good value in my experience.
besides that, you might also notice that the % jump around a little and that the last 20% or so drain very fast

Similar Messages

  • I have a question about the new Magic mouse and wireless keyboard.

    Just wondering. My computer is in my kitchen, against a wall, and connected to my t.v. directly on the other side of this wall in my living room. My question is this, can I use the wireless mouse and keyboard with the computer in the living room, through the wall, while mirroring the screens? Hope this makes sense. In other words, will the magic mouse and keyboard have the strength of range to connect through the wall. Thanks.

    It depends on how far it is and how thick your walls are. If there plasterboard partitions and only 10 feet apart then probably.
    If you have a mobile phone with bluetooth, then try sending the computer a picture of file from similar distances to that you intend using the keyboard, if it works then a bluetooth keyboard and mouse should.

  • I have a new Magic Mouse and it's pretty un responsive unless it's about 30cm away from the iMac. is this normal?

    I go my new iMac last Friday and love it but the Magic Mouse is pretty unresponsive unless it's around 30cm from the iMac I have put new batteries in and no change. Is this normal?

    Thanks

  • New Magic Mouse Serial Num Not recognised

    Just got my new magic mouse and when i type in the serial number on the support page it wont let me type in the full serial number what do i do

    Apple doesn't keep track of mouse/trackpad serial numbers in that website.  They have a record that you bought it.

  • Simple directions for setting up a new magic mouse?

    Have the original mouse, which keeps losing its connection.  I am replacing it with a brand new Magic Mouse and have looked all over for directions to connect with with my MAC, discontinue the original mouse, and start using the new one.  I have checked all my updates and downloaded the most current magic mouse software.  A pop up says there is a new version of the download already loaded, but I can't find it. 
    Can someone tell me if I really need a new mouse and can help me correct my connection loss on my orginal mouse or help me, step by step, to connect the new one?  Thank you all.

    Reset the PRAM to see if that helps the old mouse.
    Setting up the new one should be turn it on and it should pair.
    Barry

  • What is the proper way to disconnect a magic mouse and reconnect a wired mouse with new Mac Pro?

    I can disconnect the magic mouse pairing, but when I then connect the wired mouse, it malfunctions. I can open folders, etc., but then I can't close them by clicking on the close button.

    Thanks for your response. Actually, this is the first thing I did. But I just tried it again, and still the mouse malfunctions.
    I can open a folder, but when I press the close button in the corner, a toolbar customization menu comes up, but the window does not close.
    I have already chatted online with an apple tech several times and taken my computer in to an apple store tech -  but no resolution to the problem. The online tech could see the problem with screen sharing, but couldn't fix it, and the tech at the apple store could not replicate the problem. In pursuit of an answer, I have also purchased a new wireless mouse (which works), a new wired mouse, and a new keyboard.
    I have a late 2013 Mac Pro running 10.9.5, connected by HDMI to a 27" LG IPS display (27EA83R). I am now going to purchase a new HDMI cable and see if that helps. If it doesn't, the only thing left that hasn't been replaced or tested by a tech is the display. I have been assured by both an LG tech and an apple tech that the display is almost certainly not the problem -  but at this point I am not sure I have the greatest confidence in these guys.

  • How can I get my wireless keyboard and my new magic mouse to enter info into a Christmas list app on iphone 3GS? Do I have to move to another room? I have bluetooth on in my iPhone.

    I have wireless keyboard and a new magic mouse. I want to enter data into a Christmas list app on my 3GS iPhone. Too time consuming to just type on iPhone keyboard. How can I get keyboard and mouse to be 'connected' or recognized by my iPhone? I have Bluetooth "on" in my iPhone.

    You cannot connect the mouse.  This is not a feature of iphone
    You can learn about connecting a keyboard in the manual:
    iPhone User Guide (For iOS 5.0 Software)

  • HT1338 My new magic mouse will not one finger scroll left and right

    I am up to date with software but after connecting my new magic mouse it will not one finger scroll left and right. It does scroll up and down. Any ideas on what may be wrong??

    I don't have a Magic Mouse, but there is probably a setting that enables and disables horizontal scrolling.  Look on System Preferences Mouse pane.

  • Which brand is THE best in rechargeable batteries for Magic Mouse AND last long ?

    Which brand is THE best in rechargeable batteries for Magic Mouse AND last long ?

    I've been using the Apple rechargables in my keyboards/mice/trackpads for over a year now.  They last 3-4 weeks in my usage pattern but I have spares ready to go when they get weak.
    http://store.apple.com/us/product/MC500LL/A/apple-battery-charger

  • IMac G5 iSight and the new Magic Mouse - WiFi dropping out.

    The G5 with iSight seems to be unique amongst Apple computers, in that it shares the WiFi with the Bluetooth on a single compound card. I have not tested this out completely but it certainly seems to be the case that the Magic Mouse when left, having finished a session on the iMac, will after a few hours 'power down'. When it does so, sharing the WiFi, it will disable the wireless communication. I can find no known settings to avoid this from happening.
    If I had dropped my iMac into sleep mode and woken it with a click of the mouse, all would be fine, however with my G5 downloading a file in the background, to come back and find the wireless has 'dropped out' is disconcerting to say the least.
    Usually the WiFi can be re-established by turning it off and on again, then re finding my router (a TC in the other room) and all is well again for another 'period of time', which I can only guesstimate to be a couple of hours. However occasionally I will have to 'Restart' the iMac to get back to a working system. This is something I only ever really have to do with my work PC; I have NEVER had to do this on the iMac before. This is a quaint but annoying Windows thing and should not occur on a Mac. (This last phrase is slightly tongue in cheek!).
    The WiFi link to my work PC via the TC is never compromised, which pointed the finger to the new magic mouse. I run the last version of Leopard for the PPC processors, 10.5.8 and have loaded the magic mouse driver software.
    Has anyone else seen this happen?
    Has anyone else got a solution, other than not using the Magic Mouse?

    I did not see resetting PRAM mentioned yet, so if not done already, do that
    http://support.apple.com/kb/HT1379
    plus this procedure to reset SMU (power management)
    http://support.apple.com/kb/HT1767
    Be sure to follow it precisely. When you reconnect the power cord, if you are using a crowded or old power strip, connect it directly to a wall outlet for this test. Power it up with nothing connected except power cord and once it starts up, connect only your keyboard/mouse (no other USB/FireWire peripherals). Try using it that way to see if the problem still recurs.
    The only other suggestion I have is, if you have a external FireWire drive that you can erase (or create a small partition on), install a fresh Leopard installation on it. Start up from it and see if this problem still recurs.
    Alternately, back up your data, erase (re-partition and reformat) the interal drive, and reinstall Leopard on the internal drive, then give it a try. If you clone (using Carbon Copy Cloner or SuperDuper) to an external FireWire drive as your backup, you can still boot from your current installation (on the external drive). If the fresh installation test does NOT work, you can clone your clone back to the internal drive. If it does work with a fresh installation, you can keep using it and transfer just your user data back from the clone.

  • Thoughts on new magic mouse

    hi
    I just have received my new iMac 27" today and am really overwhelmed. the only thing one needs to get used to is the new magic mouse.
    the fact that the scrollball click and the 2 buttons on the side are missing, means that there are 2 options less than for the mighty mouse. a thing I really do not understand, if the mouse can determine a rightclick leftclick and even swipes for scrolling, I do not understand why apple hasn't implemented a 2finger click and a 3finger click as well. shoould be possible as it is a software related issue IMHO.
    another thing about the new magic mouse is the click sound, if it is like with the mighty mouse, then the click sound is produced by a little piezo, and the click is really tooooooooo loud IMHO.
    what do you think abou the missing 2 options and the click loudness?

    This should be an option - if not the default value - the user can set. That would improve the performance & usability so much more. Please fix it!
    Who are you talking to? As I’m sure you recall from your careful reading of the Terms of Service you agreed to when you joined the Apple Discussions, this is a User to User forum. Apple aren’t here. They don’t promise to read anything here.
    http://www.apple.com/feedback
    to send a message to Apple.
    Regards
    TD

  • Cannot find Bluetooth Preference Panel to install new Magic Mouse

    Tried to install a new Magic Mouse, but the computer does not see it. Bluetooth icon is not in toolbar, and Bluetooth Pane is not in preferences panel. Found bluetooth.prefPane file in HD>System>Library>PreferencesPane, double clicked on it, but got the error message -- You cannot open "Bluetooth" preferences pane because it is not available to you at this time. You might need to connect a device to your computer to see the preferences pane.
    Installed new batteries in Magic Mouse, but it still is not seen by the computer.
    Note - I have not used Bluetooth devices on this computer before.
    Suggestions?

    In the past, Apple have specifically recommended and supported the D-Link DBT-120 USB Bluetooth Adapter, but that one is quite old now, so you may have difficulty finding one.
    http://www.dlink.com/products/?pid=34
    They now appear to be recommending the Targus ACB10US adapter:
    http://support.apple.com/kb/HT3940
    There are literally dozens of other USB Bluetooth Adapters on the market, but not all are 100% Mac compatible, so definitely try before you buy, or buy from somewhere that accepts returns.

  • Connecting a new Magic Mouse to a sleeping iMac

    I'm in the processing of migrating to a new Mac, was backing up some data on the old mac and disconnected the mouse and keyboard from the old one to pair with the new.  Now, the data has finished backing up (I think) and I'd like to reconnect a new Magic Mouse with the old computer.  Is there anyway to do this?  I don't just simply turn it off and then on because I'm not sure if the data is done or not (the Mac is sleeping with a black screen).
    Thanks,
    Matt

    The news is not good based on what I have been able to find:
    https://discussions.apple.com/message/2914651#2914651
    This may not be definitive.  This may be a fools errand, but connect them and see if on SYSTEM PREFERENCES>DISPLAYS the iMac is recognized as a monitor.
    Perhaps a post in the iMac forum might prove useful.
    Ciao.

  • Recommendations for good mouse pad for new Magic Mouse?

    Hi, I have several mouse pads with a microfiber, but my new Magic Mouse doesn't operate smoothly on them. Sometimes it hangs up, or is slower to move than at other times. I tried an expensive one made of coated glass, but the noise of the Magic Mouse (with its two long strips) rubbing on the coated surface was too much, so I returned it. Any recommendations? Thanks! Duncan

    I have one of these. Works great, looks cool next to the keyboard!
    http://www.allsop.com/mousepads-and-wrist-rests/cupertino-mouse-pad/
    Or try here:
    http://www.google.com/search?client=safari&rls=en&q=mouse+pads&ie=UTF-8&oe=UTF-8

  • How to pair new Magic mouse w desktop? Old mouse is dead.

    How do I get my new Magic Mouse to pair w my old 2007 iMac? I don't have the old Mouse; when I bought the new one at the Apple Store they said they'd throw the old one away. So I gave it to them.

    Thank you so much Mr. Kafman... I turned off the computer by just holding down the power button and when it came back on it recognized the mouse. Thank heavens. I am SUCH a dinosaur.

Maybe you are looking for

  • Firefox: Open in New Tab

    When using Firefox, I find it awkward to use two fingers, simultaneously, to get a link to open in a new tab. So, then I was wondering if I could reassign this task to another key or to a function key. Is this possible? Can you please tell me how? or

  • Cannot save to this filename

    I am a newer user, to CS4, and recently when I try to save my work (to the same filename) I get this error message: "Cannot save to this filename. Please save the document with a different name or in a different folder".  It is very inconvenient to h

  • Regarding count for each type Trace entry

    Hi Friends, I am using ALV grid Display to display the Result. my requirement is to display report with sorting & Count for each entry on a particular field. Can anybody give me the idea or smalll code on this Plz... Thanks in advance. Regards, Ravis

  • Photosmart 5510 . Not printing black

    I have completed scan doctor, and has made no differance. still only printing light grey

  • How can I find history from a specific website on my MacBook Pro?

    How can I find history from a specific website (such as: time spent on that website and things of that nature) on my MacBook Pro?  I would also like to see if I can get a detailed history for other things done on the computer, such as: Date & Time Sp