New mail badge missing in Snow Leopard?

I remember the Mail app in Leopard used to show badges for new mail. My Snow Leopard fails to show any badges when I get new mail. I've scoured the Preferences, but can't find anything to activate them. Did Apple do away with this badge for Mail?

HI,
Could it this was a 3rd party application like here?
http://email.about.com/od/macosxmailannouncers/gr/mail_badger.htm
Carolyn

Similar Messages

Can I downgrade mail from Lion Mail(v.5) to Snow Leopard Mail(v.4)?

I just bought a new MacBook (13.3" running Lion OS 10.7.1). I -really- don't like the new format of mail and have problems with searching and other organization methods I worked out. I would like to downgrade from Lion Mail (v.5) to Snow Leopard Mail (v.4). I understand that some people have downgraded the whole operating system and saw those instructions in the discussion forums, but I would like to -only- downgrade mail. Any ideas?
Also, any recommendations on reducing my load times and delays in mail? I have over 100,000 emails over the past 4 years that are bogging down the system. I have tried archiving some older messages, but the system freezes and then downloads all the attachments from my oldest messages, filling up the entire hard disk. Thanks in advance!

There is a long thread about this -- https://discussions.apple.com/message/15733107#15733107 -- and the bottom line is that it is possible to install and run SL on a 2011 mini (with some rather wonky hacking...) BUT it doesn't work very well. Performance benchmarks of the same machine in SL and Lion show the SL as definitely slower.
Plus people are having problems with certain features on the machine not working.
I think that your performance issues sound like something else is wrong... The 2GB is a definite problem -- do you know that you can buy 8GB for the machine for $60, and getting it installed is a snap? But the first thing that I would do is to install applejack and boot into single-user mode and run disk repair (aka fsck.) Another question -- if you look on your console, do you see a voracious cpu-eating process called mds? It's the indexer for Spotlight, and there is nothing to be done about it than to just wait it out, and your machine will work much better when it is done. And Spotlight is not just a SL problem -- if you install SL it's going to want to index your disk, too...

FYI: iCloud mail password rejected on Snow Leopard and earlier Macs

If you have set Mail up manually on Snow Leopard or earlier to access iCloud Mail, and if you have also enabled 2-step verification on your Apple ID, you will find your usual Apple ID password doesn't work. Apple are now requiring app-specific password for third-party applications to access iCloud if you have set up two-step verification (if you haven't set this up you won't be affected). Since Mail on Snow Leopard and earlier was not intended to access iCloud you will have to generate a password for it. Go to http://appleid.apple.com; click 'Manage your Apple ID' and sign in (you will be prompted for an access code sent to your trusted device). Select 'Password and Security'; click 'Generate an App-Specific Password' and follow the instructions. Once you have the password, copy it and paste it into the password field in the Account settings. You should also keep a note of it (though you can generate a new one if required).

Thank you Roger. Good, sound advice!
Andrew

I have a new l7 macbook pro running snow leopard. When I try to boot into windows7 32bit, I get either a blue, black, or flickering screen. Then I have to physically shut down and try again. At that point it will load correctly. Any help?

I have a new l7 Macbook Pro running snow leopard. When I tried to to install windows 7 32 bit on bootcamp, I kept getting a flicking black and blue screen when it tried to install. (Tried several times). I finally downloaded the bootcamp windows support to a flash. I inserted that and finally got it installed. Now when I try to boot into windows I get either a solid black (sometimes blue) or flickering screen and windows will not start up. If I then physically shut down the mac and restart, it will finally boot into windows where it tells me that windows was shut down unexpectently and once I click start windows normally, it will boot up. That will generally let me boot into windows for the remaining of the day. The next day, the same thing happens again. I have tried reinstalling several times, and the same thing keeps happening. It is not my windows disk because it installs flawlessly on the mid 2008 macbook pro. Anyone know how to fix this?

I own HDM 2011. But they have products that aren't listed or hard to find too.
Recommending Pro version for one user's needs:
http://www.wilderssecurity.com/showthread.php?t=297756
Pro vs HDM 2011 feature comparison
http://www.paragon-software.com/home/hdm-personal/comparison.html
Forum topics:
http://www.wilderssecurity.com/showthread.php?t=297756
http://www.wilderssecurity.com/showthread.php?t=303155

I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6 and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previou

I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6)and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previous vesions. I can't even find a tab for synching. very strange. any help is appriciated.

iTunes 10.7 is compatible with Snow Leopard.
You can download it here: http://www.apple.com/itunes/

How do i set up a new lion imac from a snow leopard imac using time machine?

How do i set up a new lion imac from a snow leopard imac using time machine?

Connect the two via Firewire cable - Transferring files between two computers using FireWire. Boot the old iMac into Target Disk Mode. Boot the new iMac normally.
If you are starting the new iMac for the first time then do the above before you turn on the new iMac. After you turn on the new iMac you will begin in the Setup Assistant. When you complete the registration screens you will be offered an opportunity to migrate your data from another Mac. Follow the instructions to migrate your old Home folder, third-party applications and support files, and system preferences to the new iMac.
If you have already gone through the Setup Assistant and created an initial admin user account, then you do the connection step but will use Migration Assistant in the Utilities folder of the new iMac.

Resizing images within Mail not working in Snow Leopard

Hi,
I recently upgraded to Snow Leopard on both my desktop (iMAC Quad Core) and my MacBook Pro. I'm now experiencing an issue when I attach images within the Mail application.
In the past, if I attached an image I could resize it by selecting the option at the lower right of the window and it would scale the image accordingly. Now if I select "large" it resizes the image as if I selected small. It's tiny, like 30KB. I tried it on both machines and I get the same thing.
This was never an issue before upgrading to Snow Leopard. In the past if I selected "large" it would scale my image down to roughly 4X6 300dpi.
Has anyone else found a fix for this issue?
Thanks so much!
Michael

Hi Terence,
thanks for your reply.
But i have now a Problem!
iPhoto 09 itself can send max. 10 pics in one mail. When i drag & drop more photos to mail as attachement, mail can´t resize photos with greater than 150dpi correctly.
I have many photos greater than 150 dpi
With new iPhoto 09 i can not send:
1. more than 10 photos
2. without "zipping"
with mail i can send more than 10 photos at one time but i cant resize these images!
Allso whe i use this way:
http://discussions.apple.com/thread.jspa?threadID=2627690&tstart=0
The only way to send more than 10 photos with resizing the images is:
1. export these photos from iphoto to a folder with resizing function
2. drag or attach these photos to a mail
3. send mail
4. delete the created folder with images
5. empty trash
iPhoto 8 can send many photos at one time including resizing and display the estimated size of mail (e.g. Megabytes).
Taner

Mail etc migration from Snow Leopard

Hi Folks.
My new iMac has just arrived. Previously I have moved everything from my old imac to a new one as a single operation. But this has left me with a lot of Power Mac software and loads of other stuff that is now irrelevant. So this time I'm going to set it up from scratch.
My question therefore is, going from Snow Leopard to Mountain Lion, what files (and/or) folders to I need to drag across and replace, in order to bring across all of my emails, contacts and calendar events etc onto the new iMac?
Assuming it is that simple....
Many thanks,
David.

A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
1. Classic Environment, and subsequently any Mac OS 9 or earlier applications
2. Screensavers written for the PowerPC System Preference add-ons
3. All Unsanity Haxies Browser and other plug-ins
4. Contextual Menu Items
5. Applications which specifically require the PowerPC G5 Kernel extensions
6. Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
1. Intel In Macs
2. Apple Guide to Universal Applications
3. MacInTouch List of Compatible Universal Binaries
4. MacInTouch List of Rosetta Compatible Applications
5. MacUpdate List of Intel-Compatible Software
6. Transferring data with Setup Assistant - Migration Assistant FAQ
7. OS X Lion: How to use Migration Assistant to transfer files from another Mac
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake
      or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Transferring files between two computers using FireWire.
5. Startup your new Mac for the first time, go through the setup and
       registration screens, but do NOT migrate data over. Get to your
       desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
a. MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch,
      Late 2008) - What to do if migration is unsuccessful;
b. MacBook Air - Migration Tips and Tricks;
c. MacBook Air - Remote Disc, Migration, or Remote Install Mac OS X and
      wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011

Unread mail no longer bold - mail 4.05 in Snow leopard

I've seen countless posts about this happening in Lion but not in 10.6.
Yesterday, for no obvious reason, all unread emails only had the blue blob next to them but text was not in bold. Tried checking and unchecking 'display unread messages in bold font' button. Quit and reopened a few times, shut down and restarted machine but nothing changed.
Blue blob just isn't defined enough when you get a couple of hundred emails a day - too easy to miss messages appearing in multiple mailboxes. Has anyone else had this problem?

Mac OS X v10.6: Mail.app won’t open, or "You can't use this version of Mail…" alert after installing Security Update 2012-004:
http://support.apple.com/kb/TS4424?viewlocale=en_US&locale=en_US
Fellow user Grant Bennet-Alder offers this solution:
Some users have reported this problem if the Mail Application has been moved out of the top-level /Applications folder, or duplicated in another location.
When the Security Update is done, the old version of Mail is disabled.
The solution has been to:
1) make certain Mail is in the /Applications folder
2) There is no other copy anywhere else.
3) Once steps 1 and 2 have been done, Manually download and re-apply the Security Update (2012-004) by hand.
Security Update 2012-004 (Snow Leopard)
If the Mail.app has been LOST, it can be re-installed by applying the 10.6.8 version 1.1 combo update. But this update is quite large and it is usually not necessary:
Mac OS X 10.6.8 Update Combo v1.1

I've moved to Mail 4.0 in Snow Leopard. Very nice.

After a long stretch with a combination of Thunderbird and Entourage, the exchange server support in Snow Leopard caused me to take a new try at Mail 4.0. I was surprised at how easy it was for Mail 4.0 to get connected to my work's exchange server. I can also now accept or reject calendar invitations from work directly from within Mail 4.0. I've also setup Mail 4.0 to access my gmail via IMAP. I'm surprised at how fast Mail 4.0 is compared against Entourage and Thunderbird. Very nice.

I just moved from entourage to mail 4 in Snow Leopard. I am on an exchange server. All my emails, contacts and appointments came over to Mail 4.0. But I have one Project in Entourage that I cannot see or find. Does anyone know if Mail 4.0 will support Projects that is in Entourage and Outlook?

Yosemite Disk missing from Snow Leopard Startup Disk

I recently installed Yosemite in a triple-boot configuration with Snow Leopard and Windows 7.
Note: to anyone trying the same I learned the hard way that the Yosemite has to go after Windows or Windows' 4-partiton limit will be exceeded and it won't install. My partitions look like this: (Invisible) EFI, Snow Leopard, Windows 7, Yosemite, Recovery.
But the topic of this post is the fact that the Yosemite Disk does not appear in Snow Leopard's Startup Disk in System Preferences. I've seen a few other posts about this and want to share a work-around I've found. Here's the procedure:
1) Boot into Yosemite.
Open System Preferences>Startup Disk.
If the Yosemite startup disk is not already selected, select it and reboot.
2) In terminal, enter these commands:
     nvram efi-boot-device > ~/desktop/YosEFI
     nvram efi-boot-device-data >> ~/desktop/YosEFI
The YosEFI name is arbitrary; call it whatever you like.
The > and the following code on the first command creates a file named YosEFI on the desktop and sends the output of the first nvram command to it.
The >> on the second command appends its output to the existing YosEFI file. A single > here would overlay the output of the first command.
3) Open System Preferences>Startup Disk.
Select the Snow Leopard disk and reboot.
4) Copy the YosEFI file from the Yosemite desktop to a folder of your choice.
5) Create a file in Text Editor (I called mine BootYosemite - with no .txt extension), and put (a version of) this code in it:
     sudo nvram -f ~/Documents/YosEFI
For simplicity this example assumes the YosEFI file was saved to your Documents folder. Adjust the path as appropriate.
6) Open Terminal, navigate to the file created in Step 5 (BootYosemite), and make the file executable:
     chmod 755 BootYosemite
7) You can now double-click the BootYosemite file and it will open a Terminal window and prompt for an Administrator password. When the command runs, it imports the efi parameters from the YosEFI file to NVRAM and the next system restart will boot into Yosemite without the need to use the Option key.
Of course, it's debatable whether being required to enter an Administrator password is really any easier than holding down the Option key, but for those who want a work-around for the missing Yosemite in Snow Leopard's System Preferences>Startup Disk, this is one solution.
8) If you really want to get creative, you can put BootYosemite in your ~/Library/Scripts folder (create the folder if you don't already have it) and run it from the Menu Bar.
To add a Scripts option to the menu bar, open AppleScript Editor (It's in Applications/Utilities), open Preferences, and check Show Script Menu in Menu Bar. You'll need to re-logon (not reboot) to pick up the new script and show it on the Menu Bar.

Simpler is to use the donationware QuickBoot app.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Mail wont open in Snow Leopard

After installing Snow Leopard, I can't open Mail, which I need to do in order to configure it with my e-mail server (Yahoo). Clicking on Mail prompts the message: ""You can't use this version of the application mail.app with this version of Mac OS X. -- You have mail.app 3.6"
Any help would be appreciated.

Sounds like you've co-minglied an old install?
Check your MAIL app version...should be 4.2. If not and you can't find it, do a custom install from the SL DVD and choose to install related applications only.
If still no joy, try this - find the /Library/Preferences folder in your user/Home folder and then locate and delete this file:
com.apple.mail.plist
*Caution* - doing this may clear your account settings so be sure to note those first in the event you are required to reconfigure, etc.

Mail wont open after snow leopard update

Mail refuses to open after update,when initated it flashes in the tray then disappears,has apple a fix for this problem?
Or admits it exists.
Thanks

Mac OS X v10.6: Mail.app won’t open, or "You can't use this version of Mail…" alert after installing Security Update 2012-004:
http://support.apple.com/kb/TS4424?viewlocale=en_US&locale=en_US
Fellow user Grant Bennet-Alder offers this solution:
Some users have reported this problem if the Mail Application has been moved out of the top-level /Applications folder, or duplicated in another location.
When the Security Update is done, the old version of Mail is disabled.
The solution has been to:
1) make certain Mail is in the /Applications folder
2) There is no other copy anywhere else.
3) Once steps 1 and 2 have been done, Manually download and re-apply the Security Update (2012-004) by hand.
Security Update 2012-004 (Snow Leopard)
If the Mail.app has been LOST, it can be re-installed by applying the 10.6.8 version 1.1 combo update. But this update is quite large and it is usually not necessary:
Mac OS X 10.6.8 Update Combo v1.1

Free Upgrade To Lion For New MacBook Pro Shipped With Snow Leopard?

I just bought a brand new MacBook Pro which just arrived last week. It came pre-installed with Snow Leopard. Is there a program, as in the past, to upgrade to Lion for free? So far I have not figured out a way to do this.

OS X Lion - Get up to date

HP AIO: Scan to Computer STILL missing under Snow Leopard?

Has anyone gotten any info on the status of the "Scan to Computer" and "Copy to Computer" (for reading memory card) under Snow Leopard? Being able to scan and copy files from my AIO directly to my Mac under Leopard was freaking awesome. Now I have to acquire images from the Mac (which works) and there is no way to automagically copy over files from the card reader at all.
It's a real bummer to have to use a Windows machine to do these things... Especially since it was working fine in Leopard and we've been waiting months with no work and the only HP person appears to no longer be able to post here.

Uh-huh. I beg to differ and think it is an Apple issue and an Image Capture issue in particular.
I have a nice new Epson SX610FW that is absolutely stunning in Windows Vista.
It also has Epson Scan application that does scan but Image Capture sticks and will not talk to the scanner.
Plus on Windows I can fax from the 'pooter using Epson Fax, in OS 10.5 or 10.6 no fax option is available.
I am of the opinion that print, scan and fax is broke in OS 10.6
So, in my case on a wi-fi capable all-in-one:
Windows Vista Home Premium
Scan
Print
Fax
On the device
Copy
Fax
send scan to a declared network computer (I have not tried this too thoroughly but it looks broke on OS X)
In OS 10.5
Scan
Print
no Fax
or 10.6
Scan with Epson Scan but not with Image Capture or Preview (Preview fires up Image Capture with no option to use Epson Scan instead)
Print
no Fax
Why won't OS X do Fax easily from an all-in-one - a relatively new all-in-one at that?
Interim conclusion
Image Capture is broked in OS 10.6
Fax is strange in OS X

New mail badge missing in Snow Leopard?

Similar Messages

Maybe you are looking for