New material specifi field not appearing in LSMW objects

Dear all,
Within the conversion process, we have to load "Z" specific fields whose values are stored in the MARC table but that are not appearing in the standard LSMW object 0020 - Material master. Is there a specific step or action to be taken (or object to be selected in LSMW) so these fields would appear in the structure ?
Thanks for your answer,
Cheers

Hi Olivier
Standard object 0020 gives fields only available in standard tables MARA , MARC , MBEW, MAKT . I too faced this problem for ML based fields in accounting & costing views ( as these fields are not in MBEW they are in CKMLHD). The said Z field if it does not exist in MARC it cannot be seen through std object. U need to do a saperate recording to upload this field. I dont see any other option to my knowledge.U can up load remaing fields through the std object 0020 & create a saperate recorded LSMW only for this Z field.
regards
prasad
reward if useful

Similar Messages

Hi, just upgraded my iphone 4s to ios6. all of my playlists are gone and if i create a new one, i does not appear on my phone. itunes match is activated. can someone help me?

Hi, just upgraded my iphone 4s to ios6. all of my playlists are gone and if i create a new one, i does not appear on my phone. itunes match is activated. can someone help me?

You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.

SHCess field not appearing after using utilization tab in excise invoice

Dear All,
SHCess field not appearing after using utilization tab in excise invoice.The other fields and values releated to SHCess are appearing.
Please give the inputs.
Regards,
deepti

issue resolved

My new iphone 4s will not appear in my itunes, i have followed all of the troubleshooters on apples website, any advice?

My new iphone 4s will not appear in my itunes, i have followed all of the troubleshooters on apples website, any advice?

Does it charge?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try another cable
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar

Not appear add/remove object merged

Hi,
I have a web intelligence report with a merged, but the option does not appear add/remove object in the merged, however, supposed that this function would be enabled on the version you just updated, as mentioned in this link:
https://scn.sap.com/community/businessobjects-web-intelligence/blog/2013/03/10/what-is-new-with-web-intelligence-bi-41-part-2-core-capabilities
upgrade
BI4.1 SP1 Patch7
regards

Maybe something here will help?
[[Removing the Search Helper Extension and Bing Bar]]

Profiling application but component does not appear in Live Objects

I have built an application using Flash Builder 4.6 and Flex SDK 4.6, which consists of many custom-built components, some of which are vast and contain lots of code. When I run the application, one of the components which loads using PopUpManager is causing the memory usage in Task Manager to increase and despite closing/reopening the component, the memory usage never goes down, only up. Eventually the process runs out of memory and crashes.
So I'm trying to profile the application. When I run the profiler, I can see all the classes opening into the Live Objects window. However when I load the component which is eating the memory, it appears in my application but does not appear in Live Objects, nor does any of its children.
What would cause this to occur?
Also am I doing the right thing by using components or should I be using modules instead?

hi Venkat,
it seems that 0sold_to not assigned to any infoobject catalog, you can try modify it with RSD1, to bring it to infoobject catalog, you can choose one infoobject catalog right click, change, and move 0sold_to from left to right and activate the infoobject catalog or use following function module (SE37)
hope this helps.
RSDG_IOBC_REORG
Import parameter Value
I_OBJVERS A
I_PROGRESS
I_IOBJTP *
I_ALL_IOBJ X
I_T_IOBJNM 0 entries
I_BYPASS_BUFFER
F8 -> Execute
Note 573421.

New field not appearing in component configuration for standard web dypro

I'm trying to add a new column to a table in an sap web dynpro component. I've enhanced the view to add in the new column but also noticed that it's using component configuration. When I go into the approriate configuration, however, all of the existing columns are there but my new column does not appear. Is there something else I need to do to pull the new field into the configuration?
thanks,
Malcolm.

Hi Olivier
Standard object 0020 gives fields only available in standard tables MARA , MARC , MBEW, MAKT . I too faced this problem for ML based fields in accounting & costing views ( as these fields are not in MBEW they are in CKMLHD). The said Z field if it does not exist in MARC it cannot be seen through std object. U need to do a saperate recording to upload this field. I dont see any other option to my knowledge.U can up load remaing fields through the std object 0020 & create a saperate recorded LSMW only for this Z field.
regards
prasad
reward if useful

Field not appearing in Field Catelog (V/60)

Hi Guys,
I need to replace an existing table by creating a new Table in the existing Access Sequence with the combination of "Ship to Party/Product Hierarchy".
Logistics>Shipping>basic Shipping functions>Output determination>Maintain Condition Tables-->maintain output condition table for deliveries.
I am choosing a new table by the name 902, but i am not getting the field " PRODH Product Hierarchy" on the right hand side to choose from.
I checked the field catelog also. Firstly the field catelog was also not having the field, and then i added the field in it by choosing new entries.
I guess i am missing some step in between, thats why the new field (PRODH) is not showing on the right hand side while creation of the condition table.
One more thing, when i am seeing the Field Catelog, i am able to see a very large number of fields, then why only a few are appearing during creation of a new table??????
Can you guys help me out on this, this is the 3rd time I am posting this query.???
Thanks very much indeed.
Regards,
Vivek

HI TRY WITH
1. How to add new field to field catalog?
2. How to create condition table using that new field?
For adding field into Field catalogue:
I shall give an example. But you should first identify the field for Profit Center (Design ID) and then do as follows:
For example if you want to use field PSTYV ('Sales document item category') that is included in structure KOMP ('Pricing Communication Item') as a key for a condition table.
When you create a condition table (Transaction V/03), however, the system does not propose the field in the field catalog.
Prerequisites:
For technical reasons, field PSTYV was included in structure KOMP, however, not in structure KOMG ('Allowed Fields for Condition Structures').
To solve the problem, proceed as follows:
1. Call up the ABAP Dictionary (Transaction SE11) and create data type ZZPSTYV. Choose PSTYV as a domain.As a short text, you can use, for example, 'ZZ - sales document item category' and as a field label, you can use the field labels of PSTYV.Save, check and activate your entries.
2. Call up structure KOMPAZ in the ABAP Dictionary (Transaction SE11) in the change mode and make the following entry:
Component   Component type
ZZPSTYV     ZZPSTYV
Save, check and activate the change you made.
3. Note:Because of the change in structure KOMPAZ, field ZZPSTYV is now known in structures KOMG and KOMP because structure KOMPAZ is included in both structures.
4. Call up Transaction SPRO. Navigate to 'Sales and Distribution -> Basic Functions -> Pricing -> Pricing Control' and execute 'Define Condition Tables'. Choose 'Conditions: Allowed fields' and include ZZPSTYV as a new entry.
5. Note:Now you can use field ZZPSTYV as a key field when you create a condition table Axxx.
6. Supply the new field you defined by including the following source code line in USEREXIT_PRICING_PREPARE_TKOMP:
              MOVE xxxx-PSTYV TO TKOMP-ZZPSTYV.
In order processing you find the user exit in Include MV45AFZZ, and in billing document processing you find it in Include RV60AFZZ.
Consider that you can also use this note as a help if you want to use other customer-specific fields as key fields in a condition table.For header fields, use structure
KOMKAZ instead of structure KOMPAZ and USEREXIT_PRICING_PREPARE_TKOMK instead of USEREXIT_PRICING_PREPARE_TKOMP.
For more information, see Transaction SPRO via the path 'Sales and Distribution -> System Modifications -> Create New Fields (Using Condition
Technique) -> New Fields for Pricing' and Note 21040.
For creating a condition Table:
1) There are almost all the regularly used Conditon Table predefined in the system from 001 to 500.
See what best you can use the Standard Tables to avoid further errors.
2) In case you should define the new condtion Table,
a) Goto TCode: V/03
b) Give a Table any number from 501-999
Press execute and reach to next screen.
c) Check up whether the field you are looking is already added in Field catalogue.
d) Double click on the fields you want to make a Table..one by one. Note that the sequence here is important in higher hierarchical to lower..
Eample : Sales Org, DC, Division, Customer and then Material etc..,
e) After selecting, click on the Techincal View buttin (redone) and reach to next screen.
7) Check which key should be in header and which key should be footer. Use check and uncheck functionalities there..
8) Once you are through with all the above steps ..click on generate button.
Check the Table is generated or not.
You can check it at V/04 or V/05 or in SE11.

Vendor to vendor entry-profit center field not appearing in line item

Dear Sir/Madam
We have gone live with New GL Implementation. Last month we have implemented it.
Now we are passing entries from vendor to vendor. It is transfer entry from one vendor to another through T code FB01.
we have made the profit center field mandatory in the Reconciliation GL account Field status group. Also we have made the profit center field mandatory in the Posting key 21 and 31 field status. The profit center field is not appearing in the line item because of which we are not able to post the entry.
Kinldy help us to resolve the issue.
Prashant Zinge

Hi Prashant,
As mentioned by all here.. it is correct that you do not have profit centre in Vendor line items..
As I understand it is a one time activity.. of transferring balance from one vendor account to another vendor Account.. so you can use a clearing account to transfer the balances.. this way your entries will increase but you will be able to post w/o any customisation. You can also use LSMW to post this.
Regards,
SAPFICO
Edited by: SAPFICO on Jun 20, 2011 11:49 AM

Price_C field not appearing in Shopping cart

Hi All,
I am using MDM5.5 SP02 and SRM server 5.0 and facing problem for price field
Earlier I tried to upload catalogs price with price information field , but didn't succeded.
Then I created new field in MDM console as Price_c and uploaded the price.
In UI config I mapped the New_ITEM-PRICE with the new field Price_c.
But when I go to create shopping cart , this field is not available.
Even whatever setting I have made User specific fields i.e Customise display fields ,Customize Search fields are not appearing in the Shopping cart
Please guide me
Thanks
Suds

Hello Suds,
If you create any extra fields or tables then make sure that they have proper codes assigned to them or not in MDM Console.
If not then assigned the proper code name.just follow the code name as MDMSRM_FIELDNAME.
If the field which you have created related to any OCI field then just map with that in UI else map it with NEW_ITEM-CUST_FIELD1.
By doing this, you will get the field which you required.
I hope this will solve your problem.
TNR,
Saurabh...

Added fields not appearing in the DSO transformations.

Hi,
I have added three new info objects into data fields in the DSO then activated and not appearing added fields in the transformations.
Please suggest me,
regards,
Jayapal.

Hi Jayapal,
i dont know whether it would help you...you can give a try on it.
Instead of deleting the Transformation, just delete the mappings if any in the transformation.
Goto DS->Fields Tab-->In the Column Template info Object. Try mapping corresponding IO with the Source IO.
Then it will show a pop up give Copy . Activate the DS.
Goto Info Provider>Select the Transformation> If it is active-->reactivate it by clicking the Pencil Icon with glass and click activate icon.
If its not active, then reactivate it again by clicking the Pencil Icon with glass.
Let me know if it Works... Cheers
Regards,
Syed
Edited by: shameer83in on Nov 20, 2009 12:10 PM

Material item text not appearing in PO Print Preview

Hi experts,
We have created a new PO type . We have assigned it with PO text via Spro>Purchasing>Purchase Order > Message > Text for messages > define text for purchase order
Maintained text for document header
Maintained text for document item
But still in Purchase Order , the material PO text at item level , is not appearing at the time of print preview / print out.
Please suggest .
Regards,
( Rajneesh Gulati )

If I understand correctly, you want to copy the purchase order text from the material master directly into the PO's for this material.
I got the same problem; text appears in PO item text, but doesn't appear on print preview.
=> check your forms first
=> if you can't find an error here, check the copying control in
SPRO -> Materials Management -> Purchasing -> Purchase Order -> Texts for purchase orders -> Define copying rules for item texts
go to the text linkages of the text type that you want to see appearing
=> make sure that the entries with source object 'material master' have the Fix value (blank) rather than N or * (if you see the text appearing in the PO but not on the print out, this means that this setting is currently set on *)
Hope this helps

Field not appearing in datasource

Hello Experts,
I have enhanced extract structure with a new field. written code to populate the field in CMOD.
But this field is not apperaing in datasource.
I have used debug mode in RSA3 and found that field is getting populated but it is not appearing in output.
Can anyone please help.
Thanks ,
Saurabh

These are steps to appending a field, just in case one was missed:
Step 1: Append structure via RSA6, by finding datasource and then clicking on the Functional Enhancement button; this will open up the append structure. NOTE***If this has already been created, you can access the append structure via SE11 (usually ZA and then the structure name)
Step 2: Add field to the append structure and activate
Step 3: Go back into RSA6 and find the datasource and click on the change icon.
Step 4: Validate the the Hide field is not check for this new field that you added and that the 'Field Only Known in Customer Exit' is checked
Step 5: Save this datasource
Step 6: Open CMOD, enter your project that you have created and then click on components and display
Step 7: Choose EXIT_SAPLRSAP_001 for transactional data enhancements (ZXRSAU01) and EXIT_SAPLRSAP_002 for master data enhancements (ZXRSAU02)
Step 8: Activate associated cmod code above and put a breakpoint (hard or soft one) in your code to validate that it is accessing this cmod code that you created.
Step 9: RSA3 and execute in debug mode until breakpoint is hit
If all of the steps above are executed, this field should be populated. There may be an instance that the view of your RSA3 extraction is not showing you all the fields because of the display of this output but if you highlight a record and then click on the magnifying glass above, you will see all the data in that record but this view will only show you the populated fields so if their is not data, there is probably something wrong with your cmod code.

Storage Location field not appearing in Mat Doc.

Dear All,
While doing GR 105 for PO, the Storage Location Field is not appearing in Mat Doc. Moreover, the TO is not getting created immediately while saving the Mat Doc. I don't know why this is happening?
The material has both Qty/Value Updation ticked and all other related configuration is perfect like Mvt. Types/Ref. Mvt. Types etc.
Please help to resolve.
Regards
Samier Danish

Dear rksap7284,
Thanks for your inputs. As I already mentioned confirguartion is perfect yet there is no St. Loc. field being displayed while Mvt. type. 105. I'll provide more information as below:
- PO has Acct. ***. Cat as "P" as it has WBS element.
- Material Type is ERSA
- GR 103 has happened.
Awaiting your reply
Regards
Samier Danish

PO field not appearing while posting Vendor Invoice

Hello,
While posting an entry using FB01/ F-43, for posting key 31(Vendor Invoice), despite making Purchasing Document (Purchase Order) field optional in the field status group of both the posting key 31 as well as the Reconciliation (GL) Account, the Purchasing Document field is not appearing. Please provide the solution if it's possible to get this field while posting the entry.
Thanks and Regards,
Sumita

If you try to book vendor invoice through F-43 or FB01 t codes, then, the system would always show PO open for invoice verification.
In case of a PO, IV should always be done through MIRO t code.
Thanks.
VS

New material specifi field not appearing in LSMW objects

Similar Messages

Maybe you are looking for