New MBP and Boot Camp

I just got my 15" MBP and am trying to install Boot Camp on it. I updated the firmware from the website with the most recent update and OS X from software update, but the Boot Camp Assistant still says that I need the firmware update to install. If I try to run the most recent firmware update again it says that I'm up to date. So, any pinters on what to do next?

If the issue is with the firmware update not taking then the procedure at the bottom of this page may help.
http://docs.info.apple.com/article.html?artnum=303364
Also make sure you are downloading the 1.0.1 firmware and not just the SMC update.
http://www.apple.com/support/downloads/macbookproearly2006firmwareupdate101.html
As someone pointed out in another thread the SMC firmware update does not supercede this, they run hand in hand and the 1.0.1 is still needed for bootcamp to install on the 15"

Similar Messages

Invalid node structure and Boot Camp 1.1.2

I downloaded Boot Camp 1.1.2 and during the installation of Mac Drivers I kept getting dialog boxes that the software i'm installing did not pass Windows Logo testing- I just ignored it.
After that Windows XP didn't recognise my keyboard, airport, ...
I prepared a new instalation with Boot Camp Assistant and i had an error message when the disk partition was processing.
I run Disk Utility from my Mac OS X install disk DVD and I got the following:
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid node structure
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
Please give me some help to repair my disk and to understand what happened.
MacBook Pro 2 GHz Mac OS X (10.4.8)

If you are unable to repair the drive you will need to repartition and reformat the drive.
I recommend a cloned backup to an external FW drive. You can use this procedure:
How to Clone Using Restore Option of Disk Utility
1. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Set Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only.
2. Open Disk Utility from the Utilities folder.
3. Select the backup or destination volume from the left side list.
4. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button.
5. Click on the Restore tab in the DU main window.
6. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
7. Select the startup or source volume from the left side list and drag it to the Source entry field.
8. Double-check you got it right, then click on the Restore button.
For added precaution you can boot into safe mode before doing the clone.
You will only have to reinstall your third-party applications. All standard OS X applications will be reinstalled except for bundled applications such as iMovie, iDVD, Garageband, etc. These can be reinstalled using the Bundled Applications installer on the OS X Installer Disc.
If you make a cloned backup all your data will be on the backup. You can restore it afterwards by copying the folders to their respective locations on the startup volume.

Brand new Macbook Pro Boot Camp boots to blinking cursor

I have a brand new Macbook pro running Mountain Lion and Boot Camp 5.0. I have made the disk needed for drivers and support and stuff. Installation looks like it was successful. It gets up through making an account and setting up windows update stuff (never gets to the desktop). After that it says preparing desktop followed by logging out followed by shutting down. It then restarts over and over again to a black screen with a blinking cursor. Anyone have any ideas? I have seen stuff about booting to the win7 disk and selecting repair and then command line to repair the boot efi stuff but since it never has a successful boot it never has a build to repair to. I am frustrated after 7 different installs of windows and a lot of time wasted.

I should add that I went as far as downloading a trial of parallels and imported by boot camp partition. It booted fine but when I tried to install the drivers and support files I got a message that said this version of boot camp is not meant for this hardware. I was thinking if it was hanging on something I could boot into it using parallels and fix it. No dice.

After a new update from Boot Camp on windows 7 my functionkey doesn't work anymore!!

Hello guys,
I never used this Community but now I've a problem and I can't solve it by myself so I hope you guys would like to help me.
Specifications:
Macbook Pro (mid 2010)
13,3''
With Boot Camp on it (Windows 7 Ultimate)
Problem:
Today (26-12-2012) there came a message that there was a new update for Boot Camp (something with Boot Camp 3.3 I saw). I installed the new update but when my Macbook restrated I tried if my functionkeys (like volume and brightness) correctly worked but indeed they didn't worked after the update.
I restarted my Macbook like 10 times but it still doesn't work
I hope you guys have a solution for me so the functionkeys will work correctly.

Hi all,
thanks for your suggestions.
Unfortunately both errors still remain.
1) Web Intelligence Rich Client
I have installed BOE client tools using XI3.1 SP3 Client tools package in C:\Business Objects. The report's import runs well, but when i try to open one of the imported reports, i receive the error: WIJ 2002.
The details are:
Version:null Analisi dello stack: java.lang.RuntimeException: java.lang.RuntimeException: XML parser problem: XMLJaxpParser.parse(): Element type "ABOUT_Patentnumbers" must be followed by either attribute specifications, ">" or "/>". at com.businessobjects.wp.xml.jaxp.XMLJaxpParser.parse(Unknown Source) at com.businessobjects.webi.richclient.XMLviaOccaRC.getServerConfiguration(Unknown Source) at com.businessobjects.wp.xml.XMLServerConfiguration.load(Unknown Source) at com.businessobjects.wp.xml.XMLServerConfiguration.load(Unknown Source) at com.businessobjects.wp.tc.TCMain.initClient(Unknown Source) at com.businessobjects.wp.tc.thread.InitAppletRunner.run(Unknown Source) at java.lang.Thread.run(Unknown Source) at com.businessobjects.webi.richclient.XMLviaOccaRC.getServerConfiguration(Unknown Source) at com.businessobjects.wp.xml.XMLServerConfiguration.load(Unknown Source) at com.businessobjects.wp.xml.XMLServerConfiguration.load(Unknown Source) at com.businessobjects.wp.tc.TCMain.initClient(Unknown Source) at com.businessobjects.wp.tc.thread.InitAppletRunner.run(Unknown Source) at java.lang.Thread.run(Unknown Source)
2) Infoview
We have installed java 1.6.0_02 (we previously have Update 29).
We try to use Explorer 9.0.3 or Firefox 8.0
Any other suggestion???
Thanks

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution?

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution? Or is Apple's implementation of HDCP (if it's there) incomplete?

I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

New MBP and existing network

Hello All,
I've just migrated from a G4 PB 1.5 to a new MBP and, while I can log into the existing WiFi, I can't see any of the other nodes on the network. I have my wife's MP Black and a Mini acting as a HTPC/Server. I just migrated through using the assistant and didn't change any of the settings yet.
The Mini is sitting headless downstairs so I used to log in remotely using Chicken of the Sea VNC. Now it no longer is visible, nor do the computers show up via network.
It's been a while since I set this network up and I know that 10.4.8 has altered some of the security. What do I need to tweak??
Cheers,
JC

A router separates two LAN networks and creates two broadcast domains. The standard Microsoft workgroup browsing will only list what is inside your LAN and never something outside or across a router.
If you want to access what is on the other side you must manually enter the share with its IP address. If the computer you want to access has IP address 192.168.100.12 then you enter \\192.168.100.10\share.
But as you want to be able to share freely inside your LAN anyway, I would suggest you set up the WRT as wireless simple access point. That way, you only have a single LAN and a single broadcast domain and thus you can find all other computers if you check for other workgroup computers. Instructions how to set it up as access point are here.

Help with new MBP and iTunes

I need some help fast. I bought my wife a new MBP and in setting everything up we inadvertently setup a new and wrong iTunes account. We haven't transferred anything yet, I want to get this account off her computer before I bring everything from her Win 7 machine.
Can't find any specific instructions, can somebody help me out?
Thanks!
Mark

It's late so this will be rather short:
1. Make sure you update the older version of iTunes to the latest version
2. Go into iTunes Settings and Authorize iTunes with your Apple ID and Password
3. In settings, turn off Automatice sync
4. Connect your iPad and once recognized, right click the device from the left side of the the iTunes screen
5. Transfer purchases
6. You can then sync
A lot to digest and I don't have the time to walk you through every step. If you need to, google the points and you'll find lot's of information on where to find these in iTunes.

Got a new MBP and old external hard drive is too full for backup

I just got a new MBP and got all my data migrated and everything. I plugged my external hard drive in to run a backup, and it apparently is too full to run a backup of the new computer. Even though all the files are the same (mostly), I guess it's not going to overwrite anything because it's a new computer. Should I just get a new backup drive and start fresh for this computer. Should I reformat my old backup drive (and if so, how?)? Advice?

You should always have two backups of all vital data in any regard. A good 1TB Toshiba USB is $65
If there is NOTHING on the external HD you cant lose, format in disk utility > erase > format MAC OSX extended journaled.
then apply a Time Machine backup to the old HD of your new computer. That will free of a great deal of space.
However you should still have a 2nd backup of data. 2 backups is 1, and 1 is none.

Help! Brand new MBP and Mid '04 23" Cinema Display cable issue!

Just got a new MBP, and I can't figure out which adapter I need to use my trusty 23" display. The mini display port to dual-link DVI adapter doesn't look right, and I already know the mini display port to DVI adapter doesn't work.
Will the dual-link version work? If not, what do I do?
Thank you kindly in advance!

You need the Mini DisplayPort to DVI Adapter
<http://store.apple.com/us/product/MB570Z/A?fnode=MTY1NDA5OQ&mco=MjkyNjI0MQ>
If the display has ADC
<http://tbn1.google.com/images?q=tbn:YpgpqSJmIIBI1M:http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg>
you will also need a DVI to ADC adapter
<http://store.apple.com/us/product/M8661LL/B?fnode=MTY1NDA5OQ&mco=MjE0NTg4NA>

Brand new MBP and the user directory is corrupt?

hi, i just installd my new MBP and did a sync of my G5 settings (all except bookmarks) added a few things to my desktop and when i rebooted the desktop was cleared and the home directory was missing "Movies" "Music" "Pictures" in the left most column. all that is left is "Applications" and my user home symbol.
i tried to create a new user and when i did so was given a message that the "home" folder could not be located. weird.
anyway. i also installed a canon IP4300 driver. can anyone tell me what may be going on? do i need to erase the drive and do a fresh install?
UPDATE: i see what happened! the User directory somehow got into the Applications folder! no idea how. but i can't seem to get it out. can anyone help me out?
thx
Message was edited by: Frank Jacob

Open the Applications folder and drag the Users folder inside to the top level of the hard disk; you may need to press the Command key when dragging the item and/or provide an administrator username and password. When done, log out and back in. If only the home folder is present in the Applications folder, move it to the Users folder. Rename existing items as needed.
(25013)

Enabling 'File Sharing' on my Mac allows my Macintosh HD and Boot Camp to be visible and writeable on my home network. How can I turn this off, so that only folders/files I share are visible?

So I've been trying recently to get my MacBook Pro connected to my home network. There are two other desktop computers in the household, and I'd like to be able to connect to their shared folders, as well as allow them to access shared items on my MacBook Pro. I think I've read all the documentation regarding this issue on the Apple Support site. I do have administrator privileges on my Windows 7 computer.
Issues connecting from PC to Mac
A couple of days ago, I enabled SMB File Sharing on my MacBook Pro, and in addition to the already shared Public folder, I added another that resides within Movies. Then I went to my Windows 7 PC, and under Network, my MacBook Pro appeared. I double-clicked on it (I cannot remember if I was asked to enter my Mac user credentials; I think I was), and I saw the two shared folders: Public, and the Movies folder.
However, today I went back to my Windows 7 PC, accessed my MacBook Pro, entered username and password, and in addition to the two shared folders, both my Macintosh HD and Boot Camp HD appeared as shared folders, both fully writable. However, under File Sharing on my MacBook Pro, only the two shared folders (Public and Movies) appear in the Shared Folders list.
How can I prevent my Mac from sharing my entire partitions? How can I configure it so thatonly the folders I select to share are actually broadcasted across my home network? Also, it would be ideal if I can access these shared folders from my Windows 7 PC without having to enter my Mac user credentials.
Issues connecting from Mac to PC
I have a user account on my Windows 7 PC with the same name as my Mac, but with no password. When I try to connect to my PC from my Mac, the enter credentials dialogue pops up and asks me to either log-in as a Guest, or enter my User credentials.
The Guest account is disabled on Windows 7, and I assume that's I'm not able to log in as Guest (if it is possible to connect as a Guest without having to enable the Guest account on Windows 7, please let me know). Leaving the password field blank on the enter credentials dialogue tells me that it's incorrect (even though I don't have a password on my Windows 7 account).
Is it possible to access shared files and folders on my Windows 7 PC from my Mac without having to create a password protected account? If not, is it possible to create a password for the sake of accessing shared files, while not requiring it to log in to the account? I'm sorry, I know this last bit more falls under the category of Windows Help.

Sharing files from a Mac to a PC is a different animal. I've never done it myself so you may want to repost a separate question on this topic.
From what I understand, in order to access files from a Mac on a PC, you must log in using your Mac username and password (no anonymous file sharing). Since this is not very desirable from a security standpoint, Apple recommends creating a separate user account on the Mac that is dedicated to file sharing. Give that account access only to the files/folders you want to share. You can then give that user account name and password to your Windows users.

Windows 7 64 and Boot Camp

I installed 64-bits Windows 7 on my iMac 24 (end 2007) and it works perfectly. The only problem is the the Boot Camp drivers cannot be installed. (Snow Leopard disk).
Somewhere I have read that the Boot Camp drivers are not compatible with the 64-bit version on this iMac.
What shall I do now?
I also have a 32-bit version.

I don't see any help in those links.
What works for most, other than some of the issues with quality of Apple's drivers and graphic driver issue... the whole idea that somehow a Mac from 2007 isn't officially endorsed as supported, and Boot Camp 3.0 drivers are over a year old; came out before Windows 7 was out (but end of public RC phase).
which hinges on the Mac's firmware being EFI32 instead of UEFI 2.x (EFI64).
Copy the whole contents to a folder on your Windows volume.
Navigate to Apple\Drivers\Bootcamp64
control + click on that file and choose "Troubleshoot Compatibility Mode"
(or you can change Properties)
And you will then be able to overcome the "incompatible" error message and have them install
I have a 2006 Mac Pro also on the "endangered species list" as well.
Windows 64-bit versions from SP1 or later officially support UEFI, but that has not meant PCs couldn't install and use Windows 64-bit either.

How do I remove partitions "PV2" and "Boot Camp"?

I tried installing Windows 7 in Boot Camp and lost power during install. I want to completely start over but have partitions "PV2" and "Boot Camp" that I can't seem to remove. I have tried to remove partitions in Disk Utility but everything is grayed out. Boot Camp Assistant says "The disk appears to have been partitioned by another utility and can't be removed."

When I boot to recovery (Command+R) it gives me four options: Restore with Time Machine Backup, Reinstall OS X, Get Help Online, and Disk Utility. I am assuming I should erase the drives usings Disk Utility. I am able to select the PV2 and Boot Camp but when I select the "partition" tab the +/- buttons on the bottom is grayed out. I am not sure how exactly to "erase the entire drive." If you couldn't tell, I am a novice imac owner. I did make a backup using Time Machine earlier today.

Problems with Bluetooth unter XP (SP 2) and Boot Camp 2.1

HI,
I recently installed XP (SP 2) and Boot Camp 2.0 (Original Leo DVD). After Installing, my Bluetooth Mighty Mouse works fine without installing anyting. After upgrading to Boot Camp 2.1 the Mouse is not working anymore. Looking at the System Settings at XP i get the Error "Apple Bluetooth hat a Problem (Error Code 43)", ist there an option to downgrade the Driver to Boot Camp 2.0 ? or has anybody an idea what to do ?

Thats an easier to diagnose problem.
Prior to BlueTooth is setup the Windows box will react on all BlueTooth devices present.
Thats why at boot you can use your BT keyboard and mouse.
As soon as the drivers get installed the not official paired devices get kicked off/disconnect.
You really need to go back into the BlueTooth setup and officially pair the devices to your system.
You anyway want to do that because a BT system that is not officially paired sends its keystrokes without any encryption out. So in your instance your neighbor could get all your passwords.
Setup your system without a BlueTooth keyboard and afterwards (the drivers are installed) officially pair the BT keyboard you want to use.
To your graphics card question, every driver is individually accessible via the disc. Just insert the driver disc, instead of running the setup.exe choose to explore the disc. On the disc you will either see a Boot Camp or a Driver folder. Click into that folder and you can individually install all drivers (separated by vendor) rather than using the general Boot Camp installer. Do note that with this method you do not install the other Boot Camp tools such as the full keyboard support and the Boot Camp Control Panel.

Intel Iris Pro and Boot Camp Gaming?

So I'm just wondering how the Intel Iris Pro, and Boot Camp Gaming go together? I just got a 15inch Mac Book Pro with:
2.0GHz quad-core Intel Core i7
Turbo Boost up to 3.2GHz
8GB 1600MHz memory
256GB PCIe-based flash storage
Intel Iris Pro Graphics
My question is, can this Macbook run games, (or just Star Wars the Old Republic), in max settings in Boot Camp?

I am assuming this is a custom-built dust prevention solution, yes?
Anyways, I received my replacement SuperDrive and just realized that due to Windows and Mac's limitations in regards to hard drives larger than 2.2 TB, I can't have any of my 3TB drives with both OS X and Windows without having at least two separate HFS partitions on them since the Windows partition must be in the fourth partition, requiring OS X to be in partition 2, Recovery in partition 3, and the combined size of these first four partitions must be under 2.2 TB.
At least that's my understanding. I currently have three 3 TB drives and one 1 TB drive (which contains Windows XP and 7 only).
I'm not really not sure if Windows has to be in the fourth partition because as I mentioned, my 1 TB drive has EFI in partition 1, Windows XP in partition 2, and Windows 7 in partition 3. I have OS 10.9 on one 3 TB drive, OS 10.7 on the second 3 TB drive, and no OS on the third 3 TB drive. I would prefer to install Windows 8 on that third 3 TB drive and yet have only one HFS partition because my desktop is already seemingly over-crowded with all the internal drives and partitions it has (I also have a 500GB SSD drive which is my 10.10 boot volume, plugged into one of the two unused SATA motherboard ports).
My plan is to first determine if I can now break the 1 TB drive barrier I ran into before and install two Windows OSs on a 2 TB drive (technically, I am going to clone my 1 TB Windows partitions onto the 2 TB drive). Next, I will attempt to partition a 3 TB drive with Windows 8 in partition 2 and HFS in partition 3.

New MBP and Boot Camp

Similar Messages

Maybe you are looking for