New MBP and Migration Assistant

I just ran Migration Assistant on my new MBP bringing over everything from my old iBook. I just noticed that the iLife apps are the same versions from my iBook. Isn't Migration Assistant supposed to account for that, and flag the older apps? Is there anyway I can download and install the iLife apps that came with my MBP?

Thanks for the quick response. I have reinstalled the Application DVD that came with the MBP. The app versions that are loaded are..
iMovie 5.0.2 (111)
iPhoto 09 version 8.1 (415)
GarageBand 09 version 5.1 (398)
iDVD version 7.0.4 (1116)
iWeb 09 version 3.0.1 (9B33)
Are these correct? Seems iMovie is wrong. The reason I even discovered this was I went to use the iSight camera with iMovie, but it's not available. I also wonder about iChat, as the version installed is 4.0.8 (619). Doesn't the MBP come with iChat AV ?
any help appreciated!

Similar Messages

HT4889 Using USB time machine drive to move to new rMBP and Migration assistant can't find my drive

I have a time machine backup on my USB drive. I can see it clearly in finder, then when I run migration assistant, it can't be found.
I've tried repairing the disk, it's fine, it just can't find it. Any ideas?
Both machines are on the same rev of Mt. Lion, 2010 MBP and 2013 rMBP. . . .
Please advise.
--Andrew

No, both the backup and the new system are OSX10.6.
I'm afraid your solution doesn't work. If I go through finder and open up the folders on the backup, and try, for example, to open my "Movies" folder (which is one I dearly hope to recover), I get a message that:
"The folder "Movies" can't be opened because you don't have permission to see its contents."
I have tried Repair Permissions, but this doesn't help. All of the important folders have a little red stop sign on them.
Thanks though.

New MBA and Migration Assistant

I just bought the new MacBook Air and tried to use the Migration Assistant with my previous MacBook via my home wifi. I left it overnight and woke up to the calculation that the migration would take 103 hours. (!!!) Any tips on how to make this go faster?

See Pondini's Excellent information here...
Setting-up a new Mac from an old one, its backups, or a PC

How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant. The files show up on the new MacBook but cannot be opened. Thanks!

How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant? The files show up on the new MacBook but cannot be opened. Thanks!

Get info then check permissions then add your curent user name (it was probably different on old Mac) and give your username full read/write permissions.

My new macbook stops when trying to transfer using thunderbolt cable and Migration Assistant. Why

I Just bought a MacBook Pro and want to transfer information from my old MacBook Pro. Using Thunderbolt cable and Migration Assistant. My new Macbook quits as soon as I choose to start the transfer. Tried it through a wireless connection also. Help! I need to transfer my data!!

Start over, restoring the OS on the new machine, and follow the steps outlined in Pondini's Setup New Mac guide using the Setup Assistant.

HT4889 Trying to migrate from Mac-mini Tiger to Mac-mini Lion and Migration Assistant cannot find my Firewire, 400 to 800, "T" disk although it show up in the new Mac's computer folder. Help

Trying to migrate from Mac-mini Tiger to Mac-mini Lion and Migration Assistant cannot find my Firewire, 400 to 800, "T" disk although it shows up in the new Mac's computer folder. It seems that Mac-mini Tiger is as it should be and the firewire cable is OK. Something about the Migration Assistant is being missed, but I have no idea what it is.
Help

Addendum: I read on a post here (http://forums.macrumors.com/showthread.php?t=420169) about removing some kext files in order to trick OSX into thinking that there were no FireWire ports.
I followed the instructions and removed from /System/Library/Extensions/ the following files:
IOFireWireSerialBusProtocolTransport.kext
IOFireWireAVC.kext
IOFireWireFamily.kext
IOFireWireIP.kext
IOFireWireSBP2.kext
I restarted and BAM...Snow Leopard booted crazy fast and the mouse and keyboard worked instantly.
The System Profiler says "No FireWire ports were found."
So this tells me that the FW port is probably the culprit and is messing up the installation.
So how do I hack the Mountain Lion installer and tell it to ignore the FW port, which is obviously quite dead? Or is there something I can do to the Base system that is similar?

New MBP and existing network

Hello All,
I've just migrated from a G4 PB 1.5 to a new MBP and, while I can log into the existing WiFi, I can't see any of the other nodes on the network. I have my wife's MP Black and a Mini acting as a HTPC/Server. I just migrated through using the assistant and didn't change any of the settings yet.
The Mini is sitting headless downstairs so I used to log in remotely using Chicken of the Sea VNC. Now it no longer is visible, nor do the computers show up via network.
It's been a while since I set this network up and I know that 10.4.8 has altered some of the security. What do I need to tweak??
Cheers,
JC

A router separates two LAN networks and creates two broadcast domains. The standard Microsoft workgroup browsing will only list what is inside your LAN and never something outside or across a router.
If you want to access what is on the other side you must manually enter the share with its IP address. If the computer you want to access has IP address 192.168.100.12 then you enter \\192.168.100.10\share.
But as you want to be able to share freely inside your LAN anyway, I would suggest you set up the WRT as wireless simple access point. That way, you only have a single LAN and a single broadcast domain and thus you can find all other computers if you check for other workgroup computers. Instructions how to set it up as access point are here.

Got a new MBP and old external hard drive is too full for backup

I just got a new MBP and got all my data migrated and everything. I plugged my external hard drive in to run a backup, and it apparently is too full to run a backup of the new computer. Even though all the files are the same (mostly), I guess it's not going to overwrite anything because it's a new computer. Should I just get a new backup drive and start fresh for this computer. Should I reformat my old backup drive (and if so, how?)? Advice?

You should always have two backups of all vital data in any regard. A good 1TB Toshiba USB is $65
If there is NOTHING on the external HD you cant lose, format in disk utility > erase > format MAC OSX extended journaled.
then apply a Time Machine backup to the old HD of your new computer. That will free of a great deal of space.
However you should still have a 2nd backup of data. 2 backups is 1, and 1 is none.

Why does my new iMac say Migration Assistant on old iMac needs to be upgraded?

New iMac: 2.5 GHz Quad core i5 running Lion 10.7.2
Old iMac: Power PC G4 running Tiger 10.4.11
Migration Assistant app is installed on the G4.
OX software is updated.
Connected via Ethernet cable.
But computers are not seeing each other and the new iMac says "Migration Assistant on the source computer needs to be updated".
Any ideas what is wrong?

You need to use the Migration Assistant on the new computer. You have to boot the G4 into Target Disk Mode - Transferring files between two computers using FireWire. Boot the new computer normally, and you should see a Desktop drive icon for the G4. Open Migration Assistant on the new computer in the Utilities folder.
How to use Migration Assistant to transfer files from another Mac
Migration Assistant tips and tricks

I have cs5.5 master collection. Replaced my iMac with a new one, used migration assistant, now on the new iMac the apps will not open,

I have cs5.5 master collection. Replaced my iMac with a new one, used migration assistant, now on the new iMac the apps will not open,

I found that out, so used the dvd install disk w the key and tried to install, ran to 87% complete then told me to close,
safari
safarinotificati
i closed safari, still wouldn't finish loading, i closed all safari notifications, nope, can't find any app called safarinotificati
New iMac, 10.10.2, photoshop ran perfectly on my old iMac with 10.10.2
so I cannot complete the loading,
John

Can I use a TM backup and Migration Assistant to "merge" two machines?

Here's the situation:
I have a TM backup of an iMac which is being recycled to another use. This iMac has a couple of user accounts, and applications, including VMWare and XP pro.
I have a MacBook pro, which has user accounts and applications (It's been in use for a couple of months.)
What is the best way to transfer all of the iMac "stuff" (user files and applications -- have I left anything out?) to the MBP?
Migration Assistant looks like it might be the right tool -- is it? Or should I do it another way?
I'm worried that the user account on the iMac and the MBP might have the name username and/or the same numeric userID. Does it matter? If it does, what's the easiest way to check the userID?

Ok, I wasn't clear enough...
The iMac has user1 & user2 as user accounts, and MSOffice, VMWare and XPpro as applications
The macbook has userA as a user account, and the usual suspects in Applications.
What I would like to end up with is either user1 and userA as two separate accounts on the macbook, or (better) all of the user1's user directory copied into a subdirectory on userA's account properly owned by userA. (I don't care one way or another about user2). And I need the Applications out of the iMac's Applications folder to end up in the macbook's Application's folder. (I can come up with install disks for MSOffice, VMWare and XPpro if that's easier, too.)
Any advice on how to do this would be gratefully received!
It sounds like

I transferred about 400 gigs of data from my MacBook Pro to my new iMac using Migration Assistant, but it doesn't show on Finder. How can I locate my data?

I transferred about 400 gigs of data from my MacBook Pro to my new iMac using Migration Assistant, but can't find any of my data on Finder. I'm thinking that the data got transferred but not cataloged. Finder shows about 400 gigs of my hard drive being used, but the files it shows don't come anywhere close to 400 gigs. How can I find out what is really on the hard drive and how can I access my MacBook files I transferred?

I suggest that you start over, boot into Internet recovery mode, launch Disk Utility, erase and reformat the HD with one partition and GUID option, quit Disk Utility, restore the OS, and on first boot, use the Setup Assistant to migrate from the MacBook, following the steps in Pondini's Setup New Mac guide. If that doesn't solve your problem, contact Apple's Support. If they recommend the same steps, I'd opt to return the machine and get another (you can do that the first 14 days you own it, no questions asked).
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Target Disk Mode and Migration Assistant

Since FireWire has been removed, what are the best alternatives to Target Disk Mode and Migration Assistant?

1. Put old MacBook's hard drive in external USB enclosure.
2. Connect to new Mac, and run Migration Assistant.
3. Migrate just as you would normally.
Speed over USB 2.0 is almost as fast as firewire. An external enclosure will set you back about 15 to 20 bucks.
Seriously, it's not a big deal. I've been doing it this way for years. The only place you have a problem is when the old Mac's drive isn't accessible. In that case, you remove the new MacBook drive, put it in the enclosure, and use SuperDuper to back up your old Mac. You then pop the new MacBook's drive back in the MacBook and re-install OS X, telling it to transfer the old user files into the new installation.

Help with new MBP and iTunes

I need some help fast. I bought my wife a new MBP and in setting everything up we inadvertently setup a new and wrong iTunes account. We haven't transferred anything yet, I want to get this account off her computer before I bring everything from her Win 7 machine.
Can't find any specific instructions, can somebody help me out?
Thanks!
Mark

It's late so this will be rather short:
1. Make sure you update the older version of iTunes to the latest version
2. Go into iTunes Settings and Authorize iTunes with your Apple ID and Password
3. In settings, turn off Automatice sync
4. Connect your iPad and once recognized, right click the device from the left side of the the iTunes screen
5. Transfer purchases
6. You can then sync
A lot to digest and I don't have the time to walk you through every step. If you need to, google the points and you'll find lot's of information on where to find these in iTunes.

Help! Brand new MBP and Mid '04 23" Cinema Display cable issue!

Just got a new MBP, and I can't figure out which adapter I need to use my trusty 23" display. The mini display port to dual-link DVI adapter doesn't look right, and I already know the mini display port to DVI adapter doesn't work.
Will the dual-link version work? If not, what do I do?
Thank you kindly in advance!

You need the Mini DisplayPort to DVI Adapter
<http://store.apple.com/us/product/MB570Z/A?fnode=MTY1NDA5OQ&mco=MjkyNjI0MQ>
If the display has ADC
<http://tbn1.google.com/images?q=tbn:YpgpqSJmIIBI1M:http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg>
you will also need a DVI to ADC adapter
<http://store.apple.com/us/product/M8661LL/B?fnode=MTY1NDA5OQ&mco=MjE0NTg4NA>

New MBP and Migration Assistant

Similar Messages

Maybe you are looking for