New MBP and Old Aperture

I just purchased a new MacBook Pro. I bought Aperture at version 1.0 Will I be able to install the old Aperture disk and then upgrade?

Should work to upgrade to 1.5.6
If you're planning to buy the upgrade to A2.x, I don't think you even need to install 1.x. but just provide A2 with your legacy serial number.
DLS

Similar Messages

  • Got a new MBP and old external hard drive is too full for backup

    I just got a new MBP and got all my data migrated and everything. I plugged my external hard drive in to run a backup, and it apparently is too full to run a backup of the new computer.  Even though all the files are the same (mostly), I guess it's not going to overwrite anything because it's a new computer.  Should I just get a new backup drive and start fresh for this computer.  Should I reformat my old backup drive (and if so, how?)?  Advice?

    You should always have two backups of all vital data in any regard. A good 1TB Toshiba USB is $65
    If there is NOTHING on the external HD you cant lose, format in disk utility > erase > format MAC OSX extended journaled.
    then apply a Time Machine backup to the old HD of your new computer. That will free of a great deal of space.
    However you should still have a 2nd backup of data.  2 backups is 1, and 1 is none.

  • New MBP and old PBG4 don't share Airport connection well.

    Hi -
    My 2 laptops are both on a wireless network via a Snow ABS.
    They don't seem to be able to share the signal.
    If one computer is downloading a file, the other one won't be able to connect to the internet.
    Without knowing exactly what I'm talking about... I'm guessing this is a bandwidth problem?
    Shouldn't they be able to share the connection, albeit at a slower transfer rate, rather than just one at a time?
    Also, the MBP connection does seem to be a bit sluggish as compared to the PB, although the range is much improved on the MBP.
    Any insights, suggestions would be much appreciated.
    Thanks,
    Dennis

    It disables the DHCP server on the AEBS and therefore the AEBS does not create a subnet nor distribute IP addresses. The devices that connect to the AEBS request an IP address from the network that the AEBS is connected to. If the AEBS is connected directly to a DSL/cable modem, your ISP provides one IP address so therefore there is only one AEBS client allowed.

  • New MBP and existing network

    Hello All,
    I've just migrated from a G4 PB 1.5 to a new MBP and, while I can log into the existing WiFi, I can't see any of the other nodes on the network. I have my wife's MP Black and a Mini acting as a HTPC/Server. I just migrated through using the assistant and didn't change any of the settings yet.
    The Mini is sitting headless downstairs so I used to log in remotely using Chicken of the Sea VNC. Now it no longer is visible, nor do the computers show up via network.
    It's been a while since I set this network up and I know that 10.4.8 has altered some of the security. What do I need to tweak??
    Cheers,
    JC

    A router separates two LAN networks and creates two broadcast domains. The standard Microsoft workgroup browsing will only list what is inside your LAN and never something outside or across a router.
    If you want to access what is on the other side you must manually enter the share with its IP address. If the computer you want to access has IP address 192.168.100.12 then you enter \\192.168.100.10\share.
    But as you want to be able to share freely inside your LAN anyway, I would suggest you set up the WRT as wireless simple access point. That way, you only have a single LAN and a single broadcast domain and thus you can find all other computers if you check for other workgroup computers. Instructions how to set it up as access point are here.

  • Help with new MBP and iTunes

    I need some help fast. I bought my wife a new MBP and in setting everything up we inadvertently setup a new and wrong iTunes account. We haven't transferred anything yet, I want to get this account off her computer before I bring everything from her Win 7 machine.
    Can't find any specific instructions, can somebody help me out?
    Thanks!
    Mark

    It's late so this will be rather short:
    1.  Make sure you update the older version of iTunes to the latest version
    2.  Go into iTunes Settings and Authorize iTunes with your Apple ID and Password
    3.  In settings, turn off Automatice sync
    4.  Connect your iPad and once recognized, right click the device from the left side of the the iTunes screen
    5.  Transfer purchases
    6.  You can then sync
    A lot to digest and I don't have the time to walk you through every step.  If you need to, google the points and you'll find lot's of information on where to find these in iTunes.

  • Help!  Brand new MBP and Mid '04 23" Cinema Display cable issue!

    Just got a new MBP, and I can't figure out which adapter I need to use my trusty 23" display. The mini display port to dual-link DVI adapter doesn't look right, and I already know the mini display port to DVI adapter doesn't work.
    Will the dual-link version work? If not, what do I do?
    Thank you kindly in advance!

    You need the Mini DisplayPort to DVI Adapter
    <http://store.apple.com/us/product/MB570Z/A?fnode=MTY1NDA5OQ&mco=MjkyNjI0MQ>
    If the display has ADC
    <http://tbn1.google.com/images?q=tbn:YpgpqSJmIIBI1M:http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg>
    you will also need a DVI to ADC adapter
    <http://store.apple.com/us/product/M8661LL/B?fnode=MTY1NDA5OQ&mco=MjE0NTg4NA>

  • Brand new MBP and the user directory is corrupt?

    hi, i just installd my new MBP and did a sync of my G5 settings (all except bookmarks) added a few things to my desktop and when i rebooted the desktop was cleared and the home directory was missing "Movies" "Music" "Pictures" in the left most column. all that is left is "Applications" and my user home symbol.
    i tried to create a new user and when i did so was given a message that the "home" folder could not be located. weird.
    anyway. i also installed a canon IP4300 driver. can anyone tell me what may be going on? do i need to erase the drive and do a fresh install?
    UPDATE: i see what happened! the User directory somehow got into the Applications folder! no idea how. but i can't seem to get it out. can anyone help me out?
    thx
    Message was edited by: Frank Jacob

    Open the Applications folder and drag the Users folder inside to the top level of the hard disk; you may need to press the Command key when dragging the item and/or provide an administrator username and password. When done, log out and back in. If only the home folder is present in the Applications folder, move it to the Users folder. Rename existing items as needed.
    (25013)

  • I have updated my iOS and now my hotmail will not verify my password through apple mail app.  I have reset password - tried new password and old password and it still gives me password incorrect.  Hotmail works fine on Mac.  Has anyone had this difficulty

    I have updated my iOS and now my hotmail will not verify my password through apple mail app.  I have reset password - tried new password and old password and it still gives me password incorrect.  Hotmail works fine on Mac.  Has anyone had this difficulty and been able to resolve it?

    Did you try deleting the mail account, then adding it back?   I've read a lot of times that is what needs to happen in order for it to work properly.

  • My NEW MAIL and OLD MAIL emails get deleted at random

    At least twice in the last week, all of my NEW MAIL and OLD MAIL files were deleted. Some of these are very important files. I cannot work with a system that deletes my files, so that needs to be fixed. Also, I'd like to have ny deleted files restored.

    Firefox doesn't even do email, it's a web browser.
    If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
    If your problem is with Mozilla Thunderbird, see this forum for support.
    [http://www.mozillamessaging.com/en-US/support/] <br />
    or this one <br />
    [http://forums.mozillazine.org/viewforum.php?f=39]

  • New MBP and transferring software

    I've just ordered a new MBP w/ retina and want to transfer all my sofware to the new computer from my older MBP. Will migration assistant move software as well as files or only files to the new computer. Is there an easy way to move my software (office 2011, aperture and CS3) to the new computer?

    I would have both your new and your old computer on the same network, via Ethernet cables, and when you first start-up your new machine elect to use Migration Assistant to tranfer everything from your old machine to the new. It will transfer you user data, your settings, your apps - everything except the 'old' system files. I've used this technique a number of times with no problems. It's what MA is supposed to be used for and works quite well.
    Good luck,
    Clinton

  • New MBP and 23" ACD problem

    Here's my situation: when I'm at home I use my MBP with an 23" ACD (alu) and keep the MBP screen closed. I used this combo for over 6 months with a 15" MBP 2ghz core duo with absolutely no problems, including taking the MBP with me and using it by itself. I've now replaced my original MBP with the new 15" core2 duo 2.33 glossy. When I boot up in the morning I get 23" ACD flashing to a solid blue and then back to the regular screen about every 4 seconds until the system hangs. After rebooting a couple of times the problem seems to go away.
    I notice there appears to be no screen closed detector on this model like there was on the old MBP. Is this a known bug? Anyone know of a setting etc that I might have to tweak. The new MBP works flawlessly on it's own.

    If you want the MBP internal LCD to shut off while using the external display, just utilize clamshell mode. Plug in an external mouse, keyboard and LCD. Close the lid and put the machine to sleep. Wake the machine by either clicking the mouse or pressing a key on keyboard. This will wake your machine and make the external display your main monitor. You can now open the lid of the MBP to allow the heat to escape.
    Also, right now I leave the lid open while the two
    are connected. I'd like to leave the lid open while
    running the machine to allow for heat venting comming
    off of the keyboard. But even with the brightness
    turned all the way down on the background image, the
    image is still faintly displayed. Do you know how I
    might bring it to a full off mode?

  • Put SSD in new MBP and it's slower

    Alright guys so this is something I've been trying to figure out but haven't had much luck.  Previously I had a mid 2010 15" MBP that I put a crucial M4 SSD in.  When I installed the SSD I was getting a read speed of 268 Mb/s and a write of 239 Mb/s.  So yesterday I upgraded slightly to a late 2011 15" MBP and I pulled the SSD out of my old laptop and placed it in my new.  I did completely wipe the SSD and reinstall yosemite.  But when I run a speed test now my write is only 120 Mb/s and my read speed increased dramatically to 390 Mb/s as it should since this is sata 3 capable.  My questions is why would the same SSD be slower in a newer laptop with better specs.  Thanks for any help on this one!

    If you run your car into a tree, do you expect the manufacturer to repair it for free?  Using a MBP and drinking at the same time is hazardous multi-tasking.  Don't do it.
    Ciao.

  • Getting a new MBP and I have a few questions

    I'm getting a new MacBook Pro, replacing my Late 2008 model (2.8 GHz T9600, 320 GB HD, 4 GB RAM) for this years' late 2011 model, a 2.4 GHz (2760QM) quad-core Intel Core i7 Sandy Bridge, 750 GB, 4 GB RAM.
    Now, this new computer is basically an early xmas gift, as opposed to an informed purchase. I haven't done much research on the latest MBP, or their improvements in the past 3 years, so my first question is...how much of an improvement is this computer from my old 2008 model? Even though it's 3 years old, I've never had many problems with it. Programs like Photoshop and Logic work well. The only time the computer has shown its limitations is when I started playing Starcraft II. 
    Another issue: As we all know, our computers can get cluttered over time with forgotten apps, old versions of apps, old preferences or system files, remnants of apps I've deleted (I do have CleanApp but the program scares me...I'm afraid of deleting something important)...just digital garbage that manages to accumlate over time. There's some critical things that I want to transfer over from my old computer to the new one, but I don't want to transfer that clutter either. I'm pretty sure I prefer to start with a fresh disk and just slowly go through my old data while reinstalling the apps I want, but that brings up concerns about products that limit # of installs. I also don't want to worry about forgetting something, not realizing I've overlooked it until a while later. I'm sure I'm overthinking all this, but I'm sure people on here have gone through these options. I want to start fresh, but not completely fresh, you know? (e.g. I don't mind reinstalling Chrome, but I want to keep all my bookmarks)
    Last issue,
    I may possibly enter a line of work where I'll need to work with Windows (uggh), so I want to know what the better option is...Boot Camp or Parallels? I had Parallels on the old computer and I found it frustrating. Especially since all of the Windows apps/files show themselves on Launchpad, or sometimes I would accidentally select a Windows item while in Finder and Parallels would start booting. Boot Camp seems much simpler, but I've never used it. Can you use an external hard drive for it, or do you have to partition your internal one? Is there someway you can transfer files between operating systems...this is the only appeal of Parallels if not. It doesn't have to be instantaneous; just wondering if I can access windows files while in OS X and vice versa.
    Sorry for long post and all the questions , I look forward to the responses.

    Performance differences for simple applications will be virtually undetectable when compared with your older MBP.  The more complex the application, the differences will be revealed.  Games often are notorious resource hogs and I suspect you will see a significant improvement there.
    As far as transferring data, that is an individual call as to what is desirable and should be retained and what can be omited.  Before you start the transfer process, do have backups just in case.
    Best of luck with your new MBP.
    Ciao.

  • Config. a New MBP and Wanting Some Advice.

    (I apologize for the spelling errors ahead of time, but I need to hit the sack. However, I wanted to get this out since I do need to make a final decision on the new MBP early am. Getting feedback, other people's experiences, pointing out my crazy way of thinking, etc. all help me.)
    Hello-
    I am configuring a new 17" MBP. I have a ton of questions mostly because I stopped updating the OS at Tiger 10.4.11. Due to being accepted into a grad.school of architecture, panning, and preservation earlier than I thought, I will not be able to do what I was planning. that was learning Leopard on a friend's computer while taking what I thought was my last upper division course and having the basics of that OS, and having SL on the new 17" MPB for school. which I am now starting 4 months before I thought.
    I stopped at the Tiger version because Macs were real hard for me to learn and I am still probably way behind what most kids can do. (Oh, just out of the blue, what does it mean when Apple uses OS X a lot? (Are all of the Operating Systems OS X or how does that work?)
    Any feeling on skipping over Leopard and getting a Mac with SL installed, if indeed that is what they are now doing.
    I could go of on some more technical questions but I am going to not make this too long and ask m last question about the iPods. When they fist came out, I tried one and I broke it. it told me to install this software on the Pod but it already had it installed on it and I could not get it to work after that. The second time, I was exercising with it and I guess the jogging on the treadmill was too hard on the hard drive and it was out flat and cold as ice.
    So, I just switched t my old FM Sony and used that but I would like to get an iPod with the new Mac and hopefully use it with iTunes to download the thousands of songs I have purchased o iTunes onto the iPod. Any suggestions on how to learn using it? I am sure it is simple for most of you and you guys are laughing at me, but am serious, there has got to be another person out there, who did not grasp how to use it like the rest of the world.
    Also, I have never understood why Apple does not come with a practical Owner's Manual? Every time I look up something it is not there or has such little written about that are, it does me no good. I have heard about the Missing manuals and that they have one coming out for th iPods.
    any recommendation on an iPod for a beginner? Not something too large but comfortable, holds up to a clumsy big person, like I hope my MacBook Pro will. What is the name of the one you recommend and anything else as far as ear plugs or security straps that will help me keep it intact for awhile? Any resources that yo know of that is a good resource? Any on here in a section some people have sent me to but I cannot seem to find the Article section in the Apple Support area but I know there are a lot of good articles on how to do a lot of stuff somewhere. maybe it is not as organized as I assumed it was. it seems so good, I wold even like to have it on hard copy here at my desk, but probably copyright problems there.
    thanks for any recommendations and accessories for the iPod. I do not really have thousands and thousands of music I would like to download into m iPod.
    I'll sneak one last one in here, are the Macs with 2 graphics architecture really something that is needed, or maybe I do not understand how the 2 that are used-NVIDIA GeForce 9400M integrated and NVIDIA GeForce 9600M GT discrete graphics processors used all the time when needed (which is determined by the software like games, architecture apps, etc.? I know in my are I will need this for sure but I just do not understand it like I should. I will read up on it but if anybody has any "bits and pieces" that could help me understand why the average "Joe" would get a notebook with this intense graphic ability, I just do not understand.
    I also understand that you can turn them on and off or use one or two, but is this something the user can do or the notebook does? I was also wondering if these intense graphic cards draw from their own dedicated power or what? Is this e of the reasons why the new MBP give one the ability to put up to 8 GB of pretty intense RAM in this machine.
    the 13 MBP does not have both graphic cards, right? But it will take up to 8 GB of RAM. I am not getting something or my technology skills need to be worked on.
    The mini display port which seems like most notebooks are installing now, allows for pure digital connection to external displays. Can somebody give me a few examples of what this would be? Are they talking about larger displays that work off of the notebook but sit o your desk or can be used to watch a movie? I am not familiar with the term "pure digital.
    OK, thanks a ton. Sorry again if it is not clear but I need to it the sack. I really appreciate being able to come to a place like this and get some pro help.
    BTW, if anybody has come across some rude or strange posts using this Profile Name, I have been having trouble with my 2 sons doing this stuff. I have a rule that all computers are open to anybody as long as they ask if they can use it and do not snoop around looking for personal stuff. One of them found this site and ...well, long story but I am trying to deal with it like my family deals with problems like this--not the typical way most families will deal with this, but I know it will stop now.

    You can't edit a post after anyone else has responded to it, and you can't ever completely delete it — but during the short time it's available for editing (30 minutes or so, if no one has responded), you can delete all the text from it.
    Maybe you could try prioritizing your questions, so folks here will know which ones are most important to you and focus on those first?

  • Just Got New MBP and need to reinstall Software

    I just got a 15inch MBP and installed Final Cut Studio 2 which I did not know was 55 gigs. I want to install it on an external HD so I want to reinstall Leopard with my disc I received when I bought my MBP from Apple. Will I still get all of my extras such as ilife with my install disc and will it restore it to factory (as I received it when I first bought it?) Thank you!

    An 'erase and install' will remove EVERYTHING from your harddrive, and if you've already got Leopard installed, that's your only option.
    Reintalling Leopard will NOT install iLife; to my knowledge there are no Leopard+iLife 08 install DVDs. . . just Leopard DVDS. I may be wrong, as I have an old Mac and not a new one, which may come with a software package I've never seen (but I'm getting my GF a new MBP for Christmas!!). I think you need to (and should have) a seperate iLife 08 disk with which you can reinstall iLife.
    A couple of questions and some advice:
    -I assume you have at least a 120gb harddrive. Why do you want to install FCP2 onto an extrnal DVD? If you plan to use that space to store media, it would be a better idea to store the media (i.e. the video footage, etc) on an external drive and keep your FCP application on your internal HD.
    -Also, if you are going to run FCP on an external HD, get a FIREWIRE 800 external HD. They are quite a bit more expensive, but I had a LOT of problems just using FCP1 to edit footage stored on an external USB HD . .. I can't IMAGINE the problems you would have running FCP2 off of a USB external HD.
    -Thinking about it again, where are you going to store your footage? On the same external HD as FCP? I think that will work . . .
    Looking forward to hearing more!
    CMF
    Message was edited by: Smileswearily

Maybe you are looking for

  • Using transforms and filters without device drivers

    Hello, I came across NIMS as a possible solution for some transforms and filtering, possibly even generating test signal data, for a seismic application. I'm in the process of evaluating NIMS for best possible fit for what we need/want to accomplish.

  • How to associate different securityschema with different webgate .

    Hi All, We have protected all our resources which is deployed on different server using OAM. Take my scenirio like this . I have 2 resources having url like 127.22.33.22:4040/myfirstresource . 175.22.44.55.4050/mySecondResource Thesr 2 resources are

  • Exclude "*" in Like operator

    Hi All, I am trying to use like operator for an output data which has "*" appended at the end. For example, following is the Place_ID which i have data in a table 12190101* 12349021 12347284 12598992* When i provide search criteria as "1234" in my ap

  • Preloading Delays with exported objects

    I am having some trouble with a game I am creating. When debuging the preloader does not show until about 75% of the movie is loaded. Before this the movie is just a blank white stage. I have several objects that need to be exported and they have all

  • Which is the best headphone/earphone to be used wi...

    Hi Guys, Please suggest which would be the best headphone/earphone to be used with nokia pureview 808. i am basically concerned with the sound quality of the headphone. i want to hear each and  every detail of the song played by the music player. Wil