New MBP - Best way to care for battery?

Not sure if this is necessary anymore, but I am receiving my new MBP in the mail later today. What is the best way to care for the battery? Should I plug the MBP into the wall for an amount of time before turning it on, or at least wait until it is fully charged before turning it on for the first time? Is anything like that even necessary anymore?
Thanks,
Keith

Here's what Apple recommends:
http://www.apple.com/batteries/notebooks.html
Best use is frequently and lightly. Be sure to calibrate your battery every two months or so:
http://docs.info.apple.com/article.html?artnum=86284
Hope this helps...

Similar Messages

  • Question about the best way to care for my MacBook Pro's battery...

    Hello everyone,
    As the title says... I'd like to know the best way to keep my Mac's battery.
    I've been reading a lot of articles around the web and I've also asked the representatives from the store I purchased it from.. but suggestions from both sources are very different from each other.
    So I'd like to ask those who have used devices for a long time and how their devices have fared with time.
    P.S. This is my first mac and I'm totally loving it... so I'd really really want to use this for a long time.
    Thanks ~

    vaddinayr wrote:
    Then I'll be doing this...
    -- Keep my macbook plugged in when I can even at 100%
    -- Drain the battery to 40% every once in a while (maybe every few weeks)
    -- Never fully discharge.
    Doing this should help me get the best out of the battery's life right?
    Yes.
    And by the way, when charging at 100%, won't it bloat the battery?
    No.  Battery expansion is a result of old batteries that are failing and should be replaced..
    And will plugging in at 100% most of the time eventually add to its cycle count?
    No.  Please read this:
    http://support.apple.com/en-us/HT201585
    Ciao.

  • What is the best way to maintain your Battery Life for Iphone 5 ?

    What is the best way to maintain your Battery Life for Iphone 5 ?

    hi,
    so what would you suggest to do here then. let it get to 50% then run the battery down and at say 5-%ish re-charge it fully.
    is there anything i could switch off on my phone to save battery power. ive taken off he location services apart from ym locate my iphone, stopped the fetch new data and set it to manaul . this is also the same for the icloud as well.more or less everything has been set to manual or set to off ??

  • What is the best way to preserve your battery?

    I'm new to macs and I would like to know the best way to prolong my battery life, is it better to keep it plugged in while you can and disconnect it only when necessary or is it better to let your battery run down then fully charge it again.

    See Apple - Batteries and About Notebook Batteries
    This is especially important:
    Standard Maintenance
    For proper maintenance of a lithium-based battery, it’s important to keep the electrons in it moving occasionally. Apple does not recommend leaving your portable plugged in all the time.
    Apple recommends charging and discharging its battery at least once per month.

  • What is the best way to keep the battery built-in last longer?

    what is the best way to keep the battery built-in in macbook pro last longer???..
    is it by plugged in as many times as we can..and discharge it to 80-90% a week..then charged it back?

    My favorite tip for longer battery life: Uninstall Flash

  • What is the best way to prepare for CERTIFICATION?

    what is the best way to prepare for CERTIFICATION?
    what is needed?
    where can i read more about it?

    Hi,
    Do as much as possible exercises based on your course material(which will be more than enough).
    If you know (some) Java and have understand the basics of OOP then this is enough for the exam.
    And do not forget:
    it is a multiple-choice test meaning that you see the possible answers.
    Either a single answer is correct (then you will have radio-buttons) or several answers are correct
    (then you will have checkboxes; in this case almost all questions will have more than one correct answer).
    You can refer to the topics for the certification
    https://websmp102.sap-ag.de/~sapidp/011000358700000499112003E
    Some links which might help
    /message/213564#213564 [original link is broken]
    /message/514469#514469 [original link is broken]
    /message/1315746#1315746 [original link is broken]
    /message/1736299#1736299 [original link is broken]
    /message/1736299#1736299 [original link is broken]
    /message/257122#257122 [original link is broken]
    /message/130164#130164 [original link is broken]
    /message/1916905#1916905 [original link is broken]
    /thread/167254 [original link is broken]
    /message/213564#213564 [original link is broken]
    /message/1315746#1315746 [original link is broken]
    <b>
    you try www.sapdoamin.com
    They provide Certification simulation questions which are veryuseful and a must try site.</b>
    Yes more questions comes on OOPS so get your OOPS concepts very clear.
    You don't need to do extensive coding in OOPS.
    Just get the concepts clear and i am sure the certification will be a cake walkthrough.
    All the best and good luck with your ABAP Accreditation.

  • Custom IAC applications the best way to go for putting R/3 screens on web?

    Hi all,
    I am trying to figure out whether a Custom IAC would be a best way to go for putting custom developed R/3 transaction on the web. We want to put the R/3 transactions on the web but want to completely customize the look and feel of it. Is IAC the best way to go for it? will this work with any kind of transactions?
    cheer,
    i028982

    Hello,
    The ITS might not be the "best" way, but it sure would be an easy way.  If the transaction and screens are already created in the R/3 then you could just go to SE80 and create HTML templates to see if it will do what you want.  Steps:
    1. Transaction SE80
    2. Choose "Internet Service"
    3. Type in a custom developed z* name
    4. Right-click on the z* name and choose Create > Theme
    5. Create theme 99 (standard theme)
    6. Right-click on the z* name again and choose Create > Template
    7. Type in all information, theme number, program name and screen number.  Play with the "Generation Style" to see which one would better fit your transaction.
    After creating the screens you can publish to your ITS and give it a test.  Maybe this is all you need, if so, it would be fast and readily available.
    Best regards,
    Edgar Chuang

  • What would the best way to go for an virtual grid?

    I need a 3 x 8 virtual grid that I can change values to:
    Red
    Blue
    Spoiler
    what would the best way to go for this objective?
    Thanks!

    I need a 3 x 8 virtual grid that I can changevalues
    to:
    Red
    Blue
    Spoiler
    what would the best way to go for this objective?
    Thanks!Create a Grid and a Tile class. A
    Grid has a 2D array of Tile objects an
    a Tile has an attribute called Color and, say,
    an x- and y-point. Program some appropriate methods.
    Done.
    Thanks for trying, but Nanook already gave the correct answer in reply 1.Is it possible to restrict these? to like a 8 x 3 grid ?
    or should i use an if statement?

  • What is the best way to export for use on internet?

    what is the best way to export for use on internet?

    It depends. Is this for a personal web site or for a site like YouTube, Vimeo or Facebook?
    For YouTube, Vimeo and Facebook, use Publish & Share/Computer/AVCHD using one of the YouTube presets.

  • Best Way to Check for same Word in string?

    If I have an array of words, would the best way to check for the same word be to use 2 for loops?

    Huh?
    Sounds like homework...
    What is a word? Presumably a String.
    For equality of Strings you use...
        String s1 = ....
        String s2 =....
        if (s1 == s2) { equal depending on null case
        else if ((s1 != null) && (s1.equals(s2))) { equal }
    For the case of checking one array to another....
          while items in array1
                 get itema from array1
                      while items in array2
                           get itemb array2
                                  is itemb equal (see above) to itema
                                         yes - then do something

  • Best way to look for next char in String that is NOT "-" or " " or ","?

    I have a long String that is sent to me and needs to be parsed. Normally I can figure the end of the line by a line break, but sometimes the line break is lost only after the second line. This second line contains the characters:
    These characters can all appear any number of times. I will know I'm at the end of the line when I hit a character that is not one of those three. What is the best way to look for this? Is there an already set method in the Java API?
    Thanks for all the help!

    There are solutions using regular expression, eg; you can split string once a time using minus char, whitespace or comma:
    String tokens[] = anyString.split("\\-|\\x20|,");
    More sophisticated expressions could be done to achieve results:
    String re = "^(.+)(\\-|\\x20|,)(.)(.*)$";
    Matcher m = Pattern.compile(re).matcher(anyString);
    if (m.matches()) {
    String
    before = m.group(1),
    delimiter = m.group(2),
    firstCharAfterDelimiter = m.group(3),
    suffix = m.group(4);
    Regards.

  • What and how is the best way to keep the battery strong?

    Im new to owning a Macbook Pro and I was wondering how to make sure the battery stays strong?

    No: draining to near 0% is not advisable. It's best to charge recharging at 20%:
    http://arstechnica.com/gadgets/2014/04/ask-ars-the-best-way-to-use-a-lithium-ion -battery-redux/
    For the rest: use it as you please. But don't forget to use the battery every now and then.

  • What is the best way to store a battery?

    Hi,
    I have an extra MBP battery. What is the best way to store this extra battery? Should I store it when it is fully charged? or Should I store it when it is half full? Is it necessary to use that batter once in a while?
    Thank you beforehand.
    Bob

    http://www.apple.com/batteries/notebooks.html
    If you're storing it for a long time, put it away when it's about half full. If you have a couple of batteries for your MacBook, I'd recommend swapping batteries once a month or so to extend the life of both batteries.

  • IMac and new MBPro, best way to sync

    hello all,
    I have an iMac and a nice shiny new MBPro.
    What is the absolute best, and easiest, way to sync Mail and Docs between them both?
    I use my iMac when working on big University assignments but want to make sure there is a copy of what I am working on on my MBP when I open the lid, I also need the same for email so both machines are always up to date with what is going on in my life.
    Am I right in thinking that iCloud is the best way to achieve all of this as it will also allow me to access any of my files when I might be using my iPad as well?
    Thank you for helping a numpty on his way.
    Gordies

    Am I right in thinking that iCloud is the best way to achieve all of this as it will also allow me to access any of my files when I might be using my iPad as well?
    Yes. You get 5GB of free storage space.
    Follow the instructions for setting up an iCloud account on your Macs and iPad here >  Apple - iCloud - Learn how to set up iCloud on all your devices
    What is the absolute best, and easiest, way to sync Mail and Docs between them both?
    When you setup iCloud on your Macs, you'll go to System Preferences > iCloud
    Make sure Mail & Notes and Documents & Data are selected.
    On the iPad you'll tap Settings > iCloud then switch on Mail and Documents & Data
    iCloud main support page including System Status >  Apple - Support - iCloud

  • Crooked stickers / decals on my new X220 - best way to remove ?

    ok, is it just me or are other also extremely annoyed by the fact that they just shelled out over a grand for a notebook and it arrives with all stickers put on there crooked.
    From the energy star sticker on the outside to the Windows 7 decal, the lenovo enhanced experience and the intel inside.
    it is like buying a 911 and the 911 logo on the back is crooked !!!
    why do they not just leave them off instead of making it look like a cheap notebook ???
    (click i have this question too or reply here please)
    and on a second note - what is the best way to remove said decals since i do not and cannot live with them like this and the soft touch surface makes it a pain in the butt to remove them.
    blowdryer, razor blade and goo-gone ? (extremely careful to only use the blade to lift the sticker not touch the notebook)
    and on a positive note - i am pretty amazed at the battery time i am getting on the new machine and the speed of the i7 and the 6GB of RAM. but i am still uninstalling crap and installing all the things i need
    (see also Firefox 13.0 and password manager not working AGAIN thread).....
    thanks in advance for your replies.
    PS: yes, i am aware i am suffering from OCD - but still ....
    someone is already getting paid to put them on there - why not do it right ?

    if a chemical is needed to clean the residue, off-the-shelf rubbing alchohol is best.   'goo gone' is petrolium-based and can damage or discolor the plastic.   i agree with lead_org though—they'll likely just pull off without much of a fight.
    the decals are there because of regulations and contractual advertising.   energy star devices require a decal stating compliance.   intel and microsoft require decals as part of including their products with PCs.   PC manufacturers could pay intel and microsoft extra to not include the decals but the costs would be passed onto the system price and consumers would complain about the increase.
    given how easy it is to remove the decals, i pull them off when a system arrives and enjoy a clean palmrest.
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

Maybe you are looking for

  • How do I straighten photo's in a batch by the same mount?

    I'm doing a timelapse movie and I want to straighten all my photo's by the same amount at the same time. Can I do this in iPhoto? If not, is there some other program I could use. Thanks, Blitz

  • How to move multiple images in lr at one time from one subfolder to the next?

    How would i accomplish this procedure in lr5. I know you can click on an image  and drag it to the target folder.  But for multiple images this is the ? Thanks!!

  • Mass processing of orders

    Dear all, We have a condition wherein we require to mass process of revoking of technically completed production orders. Is there any transaction through which this can be achieved. Regards, M.M

  • Problem Related To Service PR?

    Hi, I want to know that once PR creted For Services and G/L Account has been entered than can G/L account Can Be Changed? in my case after PR , Po Has Also Been Created and Invoice Too Has Been Created but not Billed Yet.If Yes, Than HOW?

  • Applet Problem. Please Help.

    Hello, I've written an rmi-based application and would like to run a client side as an applet. My client app works fine when I type: "appletviewer app1.html" but when I run it in a web browser, none of the *.gif images are there. Can somebody please