New MBP Blue Screen on Boot Camp Install

I just installed XP SR2 on my new MBP, when I try to install the drivers from the DVD, it gets about half-way through and then goes to the blue screen of death (BSOD), then restarts...I have tried individually installing the drivers, but I tried to install the wireless "BroadcomInstaller" and it went to a blue screen of death again. The problem is two fold. (1) I have no idea I have having a problem via the DVD install, I know I selected the format correclty (NFTS), and I have tried to install with nothing externally attached. (2) I have no idea what individual drivers I am suppose to install. I have installed BC and XP on another MBP without a hitch. Any suggestions.

Never mind, I just figured out, I own both a MacBook and now my MBP, I was trying to use my MB disc's...I am an idoit! DRC

Similar Messages

Blue screens with Boot Camp Drivers?

Recently my Bootcamp Windows 7 install started getting random blue screens. I enabled the Windows Driver Verifier and the blue screens show up as BAD_POOL_CALLER at wdf01000.sys. If I inspect the blue screen dumps, it points me to the error being in MacHALdriver.sys
I reinstalled Windows 7, and ran it with the Verifier to ensure the install was clean. It was. The Verifier triggered the same blue screen during the installation of the Boot Camp drivers. Please point me in the right direction with this issue. Thanks!
The Bootcamp drivers were downloaded today from Apple. Version 5.0 build 5033.

Actually it is a problem specific to later model Macs.
If your Mac was manufactured after the release of Leopard (or whatever is the current MacOS), then there's a **** good chance that the Windows drivers on the MacOS disk won't drive your specific hardware. This happened on my late model iMac ... with the MacOsX 10.5 DVD crashing like crazy when installing drivers as part of the Bootcamp install. Never even got around to installing the BC Control panel, most of the drivers were improperly installed or not at all, and the Windows New Hardware Wizard never registered any installs.
Crash City.
It would be nice if Apple kept updated versions of the Windows Setup program available at Apple.com ... with all the current Windows drivers for the current Mac hardware in them. Hey, I could copy that onto a USB drive or DOS formatted CD, boot Windows, copy the file onto the Windows partition, run it ... and then Bootcamp would operate well.
Just my 2 cents worth ...
Regards,

Rthdaud.sys blue screens in boot camp

Hi all, have been playing around in boot camp (gaming for the most part) and twice now have, after a few hours of perfectly fine system running, been presented with a blue screen naming rthdaud.sys as the cause. As this is the realtek audio high-def driver, I assume it's part of the boot camp driver package and should be okay.
What would be the first thing to try? Should I reinstall the apple boot camp driver for this? Perhaps get the driver (updated version?) from realtek's website directly? Thanks in advance for any help.

Apple today introduced Boot Camp, new public-beta software for Mac OS X that lets users of Intel Macs boot directly into Microsoft Windows XP. While the move may contradict previous statements by Apple, the company said they still have no intention of fully supporting Windows on the Mac.
People who read this also read:
People Who Like This Also Like
Windows on Mac: What you need to know 21024159
WWDC: Microsoft kills Virtual PC for Mac 21015245
First Look: From the Lab: XP-on-Mac benchmarks 21024413
World Tech Update 21490391
TaskPaper 2.1 21486845
Will Apple's App Store change the desktop app market? 21484083
Recommendations by Loomia
After we released the Intel-based Macs we had a lot of customer requests asking if it’s possible to run Windows on those machines,” Brian Croll, Apple’s senior director of Software Product Marketing, told Macworld. “We decided we would help it along by creating Boot Camp.
The software, available today as a public preview version of a feature from the forthcoming Mac OS X Leopard, includes an assistant application to aid with drive partitioning and the installation of Windows drivers for Mac hardware.
mukesh
Camping-Camping

Blue screen on boot up

I am having issues with my 13.3" MBP, blue screen on boot up?, cannot figure out why? If I log in as another user(from my older macbook) it will boot but I cannot get to my newer files and docs. Any thoughts?, it appears to be a permission issue as if I boot up as a target disk using firewire, the files I want to access are still on my hard drive.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

New Macbook Pro retina boot camp install issue - Windows 7

Trying to complete a boot camp install but can't get past creating a partition. I am able to download the windows drivers through boot camp, it burns them to a DVD, verifies the DVD (couldn't use CD-R as it kept saying burn failure after verifying files) and then takes me to the make a partition page. When i click install the partition, it pops up saying "can't find the installer disc" and wants me to put one in the super drive. What gives? I have that disc in the drive, also tried the Windows 7 disc and got the same error. So basically I can't create a partition to install windows 7 that I have.
Any thoughts?

The disk was from my other PC system, however it is an OEM upgrade disc. Maybe that is the problem but if that is the case why did it work when I installed it through VMware and it worked fine? The disc can be used as a self full install of windows 7. I have also it on another PC with no issues. Trying to convert to Mac finally but this is causing a hiccup.
The next question then is do I really need to go the boot camp way? I only need it to run quickbooks (need windows version for reasons) and a couple of other programs but thought it may run better as a boot camp install rather than VM plus I couldn't figure out how to reduce the size of the partition that VM installs, it takes too much space from me for no reason (60Gb).
Thanks for any input.

X200 with OCZ ssd blue screens when booting from docking station

The x200 blue screens when booting from the docking station. If I take the laptop out of the docking station to boot and then dock once booted the laptop is fine.
The issue started happening when you I upgraded the laptop form xp to windows 7 and installed an OCZ vertex 2 solid state drive.
I have tried updating the firmware on the ssd using this utility
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-69806
The program showed that my ssd was running firmware version 1.29 and did not need to be updated.
I have also tried updating the x200 to the latest BIOS. Nothing seems to work.
Any ideas or suggestions are greatly appreciated.
Solved!
Go to Solution.

you need to modify a registry value before going from AHCI to IDE. (or viceversa).
http://www.ocztechnologyforum.com/forum/showthread.php?69682-Change-from-IDE-to-AHCI-after-Installat...

Failed boot camp install - how to remove windows partition?

Hi There,
After a failed boot camp install, boot camp no longer sees (or can remove) a windows partition - Disk Utility can't seem to remove it and if I use:
$ diskutil list
It shows up as partition 5 "Microsoft Reserved"
I also have a portion of free space that I can't seem to incorporate back into the main OSX partition - how do I remove the windows partition and make the drive a single OSX drive again?
Any help would be much appreciated
Cheers
Ben
- New Mac Pro
- Installing onto internal 1 TB SSD
- 10.9.3
- Windows 8.1

Just incase others have this issue, this wasn't caused by using Disk Utility (Disk Utility couldn't remove the partition anyway) it was caused by repeatedly trying to format the Boot Camp partition using the Windows installer when Windows refused to install.
The solution is an Apple tech note (I can no longer find it sorry) that sates that no other hard drives besides the internal HD and the Windows USB flash drive can be connected while installing windows.
Cheers

I am getting frequent lock-ups and blue screens during boot up. The lock ups occur during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button. Ideas?

I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.

I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
https://discussions.apple.com/community/windows_software/boot_camp

Boot camp install would error out

I had multiple issues as well.
When I first tried to install 8.1 full as a fresh boot camp install it would error out and say that the required files were not there to install.
Then I would try it again and it would then get close to finishing and say it cant change the boot order and fail.
Apple please fix as soon as possible.
<Re-Titled By Host>

What's happening here is that the Windows installation, for whatever reason, is not booting properly. It is also set as your default boot system. To change this, reboot your mac while holding down the Option/Alt key. After awhile you will be presented with two icons, one for OS X and the other for Windows. Select OS X and then press Enter.
OS X will boot. Go to System Preferences >> Startup Disk and then select your OS X partition and this won't happen anymore.

Yosemite boot camp install on /separate/ drive?

i have an existing windows 7 boot camp install that resides on a drive in my 2006 mac pro with my LION OS.
i now have a 2012 mac pro.
should i install windows 7 with boot camp on a SEPARATE drive or can i put it on a partition on the same drive as yosemite?
thanks

OK. thank you.
so i /like/ the idea of having an internal CLONE of my OS in bay 1 on the drive in bay 2.
in the past i have set this to happen nightly and i use WinClone (thanks hatter) to create a BACKUP of the Boot Camp install of Windows 7 and i drop this backup on the DESKTOP. this way i have a BACKUP of Windows on my boot OS and i also have one on the CLONE.
just to confirm - no reason as far as you are concerned to change this?

Should my boot camp install see my OSX drives?

HI folks. I"m trying to run Windows 7 under boot camp and thought that a Windows boot camp install could see my mac partitions so I could access the same data when I boot to my mac or my windows 7 boot camp partition. They are formatted OSX Extended Journaled. Should I be able to see them? Thanks.

Windows 7 uses a NTFS formatted file system. OSx uses a Mac only file system, so the answer is you can't without third party tools. Search these forums or search Google. Your question has been asked and answered in these forums several times. The search button is in the upper right of this page.
If you install Windows using a VM like Parallels or Fusion it is a little easier to share files between Windows and OSx.

Boot Camp Install Issue

I have a 27 inch Imac using OSX Lion 10.7.3 and I would like to install Bootcamp so I can load Windows 7. When I try to use Bootcamp Assistant I get the following message, "The startup disk cannot be partitioned or restored to a single partition." I've gleaned from the forums that I'm going to have to reinitialize the hard drive and reinstall Lion so I can properly use Bootcamp.
Once I reinitialize the drive and reinstall Lion, should I use Bootcamp to create the partition before I restore my Time Machine backup, or should I wait to use Bootcamp until after I've restored my backup? I'm worried that if I wait until after the restore that it would just take me back to "The startup disk cannot be partitioned or restored to a single partition." again. But I'm also worried that if I use Bootcamp before the restore that restoring everything will overwrite the partition, Windows install, etc.
I hope this makes sense. Any help would be appreciated.

The disk was from my other PC system, however it is an OEM upgrade disc. Maybe that is the problem but if that is the case why did it work when I installed it through VMware and it worked fine? The disc can be used as a self full install of windows 7. I have also it on another PC with no issues. Trying to convert to Mac finally but this is causing a hiccup.
The next question then is do I really need to go the boot camp way? I only need it to run quickbooks (need windows version for reasons) and a couple of other programs but thought it may run better as a boot camp install rather than VM plus I couldn't figure out how to reduce the size of the partition that VM installs, it takes too much space from me for no reason (60Gb).
Thanks for any input.

Blue screen of death after installing Boot Camp on Windows 7

Hello and thanks for the help!
Brnad new user to Boot Camp here. After a new install of Windows 7, I install Boot Camp but then when rebooting Windows I get the blue screen of death. When letting Windows attempt a repair, it fails and I am forced to Recover Windows 7 to a state before I installed Boot Camp.
Help!?

Solution for this problem is simple. You have to apply Mac Book Air SMC Update 1.7 which you can do from Mac OS X with Software Update or you can download required update manually from Apple support site. If you don't use BootCamp and have installed Windows without it, you will have to boot Mac OS X from external drive just to apply required update. After you applied SMC update, you can boot to Windows and apply BootCamp update 3.2 and 3.3.
There is a known problem with Mac Book Air EFI Update 2.3, which you won't be able to apply and it will show in Software Update every time you check for updates. There is no solution for it yet.
You get BSOD if you have BootCamp 3.1 and Windows 7 SP1 installed and you have commited Windows update which will break applemtp.sys as your SMC firmware is too old. It applies to Windows 7 32 bit and 64 bit versions in BootCamp or native install.

Black/Blank Screen with Boot Camp Win 7 Install on new 27" iMac

I'm having a problem getting Windows 7 on a new 27" iMac and am familiar with the Boot Camp Windows installation process. Here's what I've done...
1. Run Boot Camp from OSX, partition the drive.
2. Insert Win 7 cd, proceed with installation.
3. Computer restarts and the 'preparing for initial setup' message displays with the Win 7 splash screen. When it switches to where it should be displaying the Win 7 desktop, the screen is black.
I can hear the Mac still running, but there's no display. It's like it's waiting for some type of user input for the intial Windows setup (haven't yet entered the key).
I've done a hard shutdown and restarted Windows with the exact same result. After reboot, I get the 'Windows was not shut down properly' message with the 3 safe mode options, where choosing either gets me the 'Windows cannot complete setup in safe mode'. And any key reboots it.
The Mac side still runs fine and holding the option key at start up gives the Mac/Win boot options.
I'm inclined to think that it's a video driver issue since the 27" is brand new. Maybe Apple used a new video card for the larger screen and haven't updated the Boot Camp drivers. I checked on ATI's site for an updated driver for the Radeon HD 4670 they say is in the new 27" model that's currently available. (not the quad core)
Is there any workaround for this? I was thinking of installing Vista instead, and upgrading to Win7 once installed, but if it's a driver thing, it would just be a long way to the same result and could have the same problem with Vista as well.
Any ideas?

I think I figured out what is happening here with the video drivers on the new iMac's and Win7. I believe it's re-directing the video to the mini display-port output when you see the screen go blank. I installed my Win7 x64 with no issues but I had an external monitor hooked up at the time and while it was installing the O/S my iMac went black but everything moved over to my external screen. Once it finished installing then everything went back to normal after a reboot.
Not sure if that helps anyone but pretty sure that's what is going on. So if you have another monitor handy, get the mini display-port adaptor from Apple and connect your external screen before you install Win7. Cheers!
P.S. If you have one of the new iMac's and want to install the latest Radeon drivers (after you have installed Win7 on your iMac), try the following. Download and install the drivers from ATI/AMD directly. They'll try to install and fail (no worries) but now the driver/install files will be unzipped into an ATI folder on your main Windows hard drive.
Now go to this site: http://www.driverheaven.net/modtool.php and download the tool and use the Vista instructions listed on the main page of the URL above. You shouldn't need to download the MSXML 6.0 and I don't think you need to disable the UAC stuff like they suggest for Vista (I didn't) and it works fine. UAC is not nearly as intrusive on Win7 as it is in Vista so I think that's why it worked for me and pretty sure the MSXML 6.0 is already in Win7. Once the program has modified the mobile Radeon drivers then you can run "setup" from your ATI directory and the new drivers will finally install correctly including the Catalyst Control Center. Voila! I now have 9.10 drivers up and running on my new 27" iMac and working perfectly so far.
James
Message was edited by: joudbren

New MBP Blue Screen on Boot Camp Install

Similar Messages

Maybe you are looking for