New MBP haswell will be launch when ?

new MBP haswell will be launch when ?

To my knowledge, there's been no news at the WWDC about MBPs.
If Apple haven't made an official announcement, no one on here will know. This is just a user forum, there's no insider information here.

Similar Messages

  • After updating to Lightroom CC 2015, it will not launch when i click on the icon.

    After updating to Lightroom CC 2015, it will not launch when I click on the icon. A window gets up: "__crtCreateSymbolicLinkW" not found in DLL "MSVCR110.dll". Same failure occurs when I start Photoshop CC.
    LR 5.7.1  Starts without Problem.

    Have you tried logging out of your CC desktop app, then logging back in again? Quit/Restart won't work, but logging out and back in should. See here: https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  • New IMac, IPhoto will not launch. Ideas?

    New IMac, IPhoto will not launch. Ideas?

    Please read the warranty paperwork that came w/your computer.
    You have 14 days to return the computer w/no questions asked.
    You have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
    Strongly suggest that you take FULL advantage of the above before it runs out.  Let Apple deal w/the problems.
    If you DIY and mess up, your warranty will be VOIDED!

  • My new iPad mini will not charge when plugged into adapter. Any suggestions?

    my new ipad mini will not charge when plugged into adapter. What should I try?

    Does the charger get warm at all? Plug the cable into your computer with iTunes open. Does it say not charging.? If it does, the cable is good. The iPad will charge very slowly when pluged into your computer.
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • I have a problem with external editing preferences where Photoshop will not launch when I choose "Edit In"...

    Hi. I have a problem with external editing preferences. If I add Photoshop as an external editor, it won't launch when selected, if I add it as an additional external editor it will. Why? How can I fix this as I need to use Photoshop and another program as the additional external editor.
    I use a Mac running OS X (10.8.5) and PS CS4 and LR 5.7. Any ideas on a fix? Thanks in advance.

    I don't know why Photoshop won't start. However, it's possible to create external editor presets using the additional external editor tools. There are instructions on how to do this in the Lightroom help. You could assign Photoshop and create one preset, and then assign another program and create another preset.
    I don't know if deleting your preferences would fix the problem or not. It can sometimes fix other problems.
    Preference and other file locations in Lightroom 5

  • Firefox will not launch when I click the icon, it worked okay previously

    A week ago firefox began taking a long time to launch sometimes requireing reclicking the icon.
    Now it will not launch at all.
    I get no error messages, nothing happens when I click the icon.
    HELP

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    See also:
    *http://kb.mozillazine.org/Browser_will_not_start_up

  • After new update, itunes will not launch says "itunes library. itl" cannot be read because it was created by newer version. What do I do to correct this?

    After the newest update, itunes will not launch says "itunes library. itl" cannot be read because it was created by newer version. What do I do to correct this?

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • Old HDD in new MBP. Will TC attempt to backup the entire drive?

    I just got a new MBP and I want to swap drives from the old MB to the new. Will TC treat the new computer with the old drive as a totally new system and attempt a full backup or will it just continue to do incremental backups as before?
    Thx for any info and advice

    magna42 wrote:
    I just got a new MBP and I want to swap drives from the old MB to the new. Will TC treat the new computer with the old drive as a totally new system and attempt a full backup
    Yup.
    You should get the prompt in #B5 of [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum). But no matter how you answer it, Time Machine will do a full backup of the new Mac.

  • Adobe Illustrator will not launch when Flash is running

    A few of our users have reported that once Flash is running Adobe Illustrator will not launch. We are moving from Windows XP SP2 to Windows XP SP3. The version of both Illustrator and Flash is CS2 (will be upgraded later to CS3).
    This used to work on SP2 - anyone can give some hints on this?

    Nobody ever solved this

  • Web Browser will not launch when clicked.

    I installed Solaris 10 for x386 everything is up and running. Nic works but when I try to launch browser nothing happens hour glass starts then stops. I can download updates from SUN. but cannot figure out why the web browser won't launch. No firewalls or proxies involved

    Have you tried launching it through the command line? There could be some messages displayed that will give you a hint. If you are clicking on a icon, can you check what command is trying to be executed?
    -- Alan

  • Plus will not launch when Java 7 installed

    We are encountering this issue when technicians install Java 7 on new PCs. What is the advise from Oracle? Is there another patchset that resolves this issue or do we just have to have users uninstall 7 and go back to 6?
    Thanks,
    Jerre

    Michael,
    Thanks for the reply. I guess I will have to open a SR. Oh, bother. What a pain. We first encountered this issue when Java 7 was installed on a PC and it would not fire off Plus. This particular Java was the pre-release version. Since then we have had a couple more reports of the issue but now there is a version for public use. I do not know the specific versions on each workstaiton. There are only three versions as I now look at Oracle's Java page; 1.7.0, 1.7.0.1 and 1.7.0.2. The latter being the current version.
    It is too close to the holiday break to open a SR at this time. The issue is not currently wide spread at this time and the workaround is simple, so I will not take that action at this time. I am a lazy butt, aren't I. I was hoping the the gurus had already done the work for me.
    Thanks,
    Jerre

  • MBP battery will not charge when playing games.

    I have a late 2011 15-inch MacBook Pro and have had upgraded 16GB RAM for two years.
    An avid Sims 3 player, I have 6 expansion packs and play regularly. I have never had a problem with playing on my MBP.
    I had to get a new charger in December and got an Apple certified 60W MagSafe charger for $40 (has serial number, designed in CA, assembled in China, Apple logo, everything). I purchased another one for my Sims-playing roommate as well.
    Ever since I've had a new charger my MBP immediately stops charging when I load up the game, and from there the battery life depletes despite staying green. I know that The Sims 3 draws a lot of power, but I have never had a problem with charging while playing. My roommate has an older MBP, even more expansion packs for Sims 3, and yet the same charger that I got for her works fine while playing.
    Is it my charger, battery, hardware, or what that is not allowing me to play?
    Thanks!

    Some of the heavy gamers do feel the Windows machines are better suited since they can go to the high-end video/graphics support.  But, as you say, that is a big extra expense.  If you are not into that kind of high-end gaming the Mac is fine, the 2011 MBP is a great machine.  I've been using this one since it came out and it is rock solid.
    But I don't put a heavy load on it in the gaming area.  I run FORTRAN scientific codes which are heavy loads on the CPU, but not the GPU so there is not that added electrical demand.
    An external graphics card does not seem like a real need to me, especially since you would probably then be looking at another monitor, also.  If you are not having any system issues beyond the 60 w charger being undersized, why mess around more than you have to? 
    Just my two cents

  • ITunes will not launch when iPod is connected

    I've been having a problem over the last several days where iTunes will bounce a couple of times in the Dock, the black triangle appears below the Dock icon, but no window opens up and eventually iTunes shows that it's not responding. I am unable to force quit or kill it in Activity Monitor, and it prevents logging out, restarting or shutting down. I can kill it from the Terminal, and it immediately disappears from 'top' but takes several minutes to disappear from Activity Monitor or to lose the black triangle in the Dock. Trashing the plists for iTunes does not help, and Preferential Treatment and TinkerTool System both report that all is well. I ran the full suite of TechTool Pro tests, as well as directory maintenance and defragging. I also ran the maintenance tasks, disk optimization and pre-binding in TinkerTool System. I've repaired permissions with Disk Utility. iTunes appears to be working normally and without issue in my wife's user. Finally, after reading a post here, I tried unplugging my wife's iPod Shuffle before opening iTunes, and lo and behold, iTunes popped right up. If I connect it after starting iTunes, it's detected as normal.
    So, my shotgun ammo is exhausted. Anybody have any idea what would cause my user to be unable to open iTunes when an iPod is connected, but the same works just fine with my wife's user?

    Nobody ever solved this

  • New SpeedGrade CC will not launch or open after install

    I am unable to launch or open the new SpeedGrade CC after downloading and installing on a MacPro tower (MacOS 10.8.4).
    I have repaired permissions, uninstalled several timeswith the Adobe Uninstaller and reinstalled several times via Creative Cloud, emptied the /tmp folder, etc. with restarts inbetween.
    All the other CC apps that I downloaded open fine. Only SpeedGrade refuses to open. Clicking the app icon only causes it to bounce once and do nothing else.
    Any thoughts on what to try next?
    Thank you,
    - john

    MacOSX 10.8.4
    I seem to have solved the issue....
    It appears the Speedgrade installer was confused by the fact that Root (System Administrator) was enabled on this machine.
    I logged in as Root.  Launched Speedgrade and it opened just fine.  I quit, copied the prefs from System Administrator's Documents folder and placed them in my User/Documents/Adobe folder.
    Logged back in as myself.  Still didn't work.
    Disabled Root User
    http://support.apple.com/kb/PH11331
    Speedgrade now launches perfectly.
    Not sure why I had Root enabled on this machine.  I must have done it years ago to fix something else.

  • Premiere Elements 10 Will Only Launch When I'm at Work

    I've installed Premiere Elements 10 on a Windows 7 64-bit machine. When I'm at work on my work network, the program launches just fine. When I'm off the network, it won't launch at all. I'm thinking it has something to do with the program not being able to find 'My Documents' on the network.
    I've tried uninstalling and reinstalling off my network, but nothing. Photoshop Elements and all the CS6 programs launch just fine on or off my work network. I've go Quicktime installed and my video drivers are fully updated.
    The only other possible thing is that some registry thing is not allowing the program to launch. Any suggestions?

    Welcome to the forum.
    Where IS your My Documents folder located?
    Good luck,
    Hunt

Maybe you are looking for

  • Planning File Entry Job MDAB

    Hi , We are in process of implementing MRP for a plant. Query Do we need to schedule MDAB for the planning file entry before MRP job( NETCH) or run MDAB just once. If we do not schedule this job and run just once what are the problems we will face. T

  • Dialog Box as "Do you want to save the changes?" in Forms.

    Hi, I have 4 datablocks in my forms that corresponds View. In the form design, I have a canvas(multiple inserting design) with two buttons that calls the other two blocks. Am inserting the records in the following way, In first record, am entering th

  • How do you adjust the sound of a song in iMovie for sections of the film, not the entire clip? Louder at times and quieter at others.

    I am trying to have those in my film that are talking be louder than the music. At other times, I want the music to be louder, while a still photograph is being viewed on screen.

  • Hyperlinks in 11g (11.1.1.7)

    I'm reposting a post from 2 years ago because, as far as I can tell, there is no solution. I'd like to know if anyone has successfully implemented hyperlinks in BIP 11g. Can anyone share the method of calling a BIP 11g report from a hyperlink in an R

  • Access DLL

    Hello, I would like to write my own access DLL (libconnect.dll ) for authenticating requests and possibly changing the s-uri. I found some documentation on this in the flashmediaserver_managing.pdf file. This doc refers to a sample project with an Ad