New MBP instantly wakes from sleep...any thoughts?

I just purchased a new MBP 15" 2.4Ghz.
Regularly though somewhat intermittently the machine will instantly wake after entering sleep mode.
At first I had an external monitor hooked up, and it seemed to wake as soon as the monitor entered its sleep mode. Without the monitor hooked up it would still wake, but more intermittently. Finally, I tried sleeping the machine without the power adapter, and the wake rate seemed to go down a little more.
I have all the OSX updates and the current firmware.
I've tried a full reboot and resetting the SMC.
Any thoughts?

After looking around the forums a little bit I found a couple topics that talk about a bad lid sensor. I turned off the wake on lid open, bluetooth and LAN options, but still no luck.
The next morning I couldn't reproduce the issue right away. After the laptop warmed up the problem came back.
I took the laptop to the local apple store. Again after the laptop warmed up the computer wouldn't stay slept. The store exchanged the laptop.
Not sure exactly what was wrong, but all that was needed was for the laptop to heat up.

Similar Messages

OSX Mail not checking for new mail on wake from Sleep.

Since upgrading to 10.6.4, my iMac no longer checks for new mail when waking from sleep. I have to manually Get Mail, and then it keeps up to date as normal. RSS feeds get updated fine. I am using MobileMe mail.
Any ideas? I have restarted Mail and rebooted the computer. Nothing obvious in the logs.

I think you will find this is a product of the use of the IDLE command. When the computer is asleep, but you have not quit Mail and logged off, the MobileMe server try to contact the Mail app to "push" emails. Not finding any response from Mail, the account is logged off. Quitting Mail and relaunching should restore -- does it?
You can test this by deselecting to use IDLE in Mail Preferences/Accounts/Advanced.
Most people, who leave Mail running, would only allow the display to sleep and not the computer.
Ernie

Mbp randomly wakes from sleep

For some reason, my mbp SR 2.2ghz stock model randomly wakes from sleep for no reason roughly 20 minutes after I put it to sleep. I am about 10 feet from the computer and do not touch it. Auto wake from bluetooth is off. I reset the video ram, ran onyx, and tried everything i could think of. Nothing is plugged in. No programs are running. How do I fix this?

Follow the instruction listed in this thread…
http://discussions.apple.com/thread.jspa?threadID=1077308
… and return the results. There might well be an issue within Mac OS X and or the hardware which needs identifying and this will help Apple identify/comfirm their suspicions.
By the way, if you use a password to wake your MBP from sleep you will need to disable it so your MBP won't go back to sleep.

MBP suddenly wakes from sleep

Since a couple of weeks (not directly related to a software-update as far as I know) my MBP suddenly wakes up from from sleep. Sometimes it is every 30 seconds, sometimes it occurs only once or twice a night.
I've done a lot of tests and it doesn't seem to be related to specific software running at that moment. Most of the time only Safari, Mail and Messenger are the only active apps. There are never USB-devices connected wen the MBP is asleep, although during 'working hours' there are a mouse and keyboard connected. There are disconnected long before going to sleep.
Almost always the wake reasons (mentioned in the console.log) are:
MacBook-Pro kernel[0]: Wake reason = EHC1 EHC2
but today I saw:
MacBook-Pro kernel[0]: Wake reason = UHC3
I tried resetting the SMC, NVRAM and PRAM but that also didn't help.
Does anybody have a clue what these wake up reasons mean and how I can fix this problem. I see that a lot of people have these problems but so far I cannot find a solution.

Hello, I had the same problem. Today I tried "going to sleep" again and it worked.
The only relevant thing I did today was installing the "iousbfamily327.4.0log.dmg" file downloaded from developer.apple.com (search for "IOUSBFamily.kext 3.2.7")
I initially installed the file "IOUSBFamily.kext 3.1.5" for Leopard 10.5.5 a few days ago. I also had problems when inserting a USB mass storage device (I got a "blue screen").
Now, after I installed the USB debug kit for 10.5.6, my MacBook Pro goes to sleep again. Please write if this solution worked for you!

MBP - Occasional Wake from Sleep Issues

Hey everyone:
I've got a late-2011 MBP running OS X 10.10.3. Occasionally when I close the lid, it will go into a "deep" sleep mode. In a normal sleep situation, the front light will flash every few seconds when it's sleeping and when I open the lid, it'll pop back up either to the desktop or the password prompt depending on how long it's been down.
When it's in the deeper sleep (which has been going only for the last few days), I'll open the lid, the screen will stay completely black, and the front light will STOP flashing, like it's totally dead.
Press the trackpad buttons and/or keyboard. No respose.
Press the power button for a second and the sounds of activity will start. The screen will come up with a blurry version of the desktop background, a password prompt, and an orange checkmark next to my user name. Enter password, some progress happens, and it'll then go to a gray screen and a "normal" password prompt.
Enter password there, then a progress bar starts across the bottom of the screen, and it will eventually go to the desktop and function normally. This whole process takes about 3 minutes from the point that I press the power button.
As an experiment, I decided to close the lid and put it to sleep over and over to try to replicate the problem. It took four tries.
What's happening? I've done some research and read a few articles, but I haven't yet found anything that helps.
Thanks!

Alright, so I found another chat thread that seemed to point out that some people had some wake-up issues after replacing their RAM with new memory from Crucial. On my MacBook, I replaced my factory memory (2X 2GB, Samsung) with some non-branded memory from a private sale, about 14 months ago.
Since some folks seemed to think this was RAM related, I decided to do some swapping. Here's what I found, and again, the problem was when the lid was closed on battery power, it would either go into a deep sleep or hibernation or full reboot to get it to wake up.
2 Factory Sticks - No problem
Replacement stick #1, Factory stick #2 - No problem
Replacement stick #2 alone - problem....
So there it is. The machine operated perfectly normally with both replacement sticks in it. They registered and were shown as 16GB total memory in the system screens. However, this sleep problem was still present.
So now, I've tossed "Replacement Stick #2" and have installed "Replacement Stick #1" and "Factory Stick #1", which totals 10GB and all seems to be well.
Thanks for reading......

MBP wakes from sleep as soon as ac adapter is plugged in

My MBP recently wakes from sleep after this series of events:
1. Use MBP on battery power
2. Close lid
3. Sleeps (light pulses so apparently sleeping)
4. Plug in AC adapter (while the lid is still closed)
5. Wakes at that moment the adapter is plugged in (while the lid is still closed)
6. Sometimes the MBP recognizes the lid is indeed closed and then goes to sleep itself; other times, the MBP goes to sleep, then immediately wakes, then goes to sleep, then wakes, etc., repeatedly (this happens all while the lid is closed as if it's demented), until I open the lid, wake the system and then close the lid again. Then it will finally sleep.
"Wake on AC change" is set to No (see below). I was wondering if anyone knew how to set it to Yes. Maybe I just need to switch the setting back and forth once.
I can recreate the problem, so I can just take it to the Apple Store and let them figure it out (Applecare is still in effect), but I was just wanted to give it a shot here first.
Battery Information:
Model Information:
Serial Number: Sony-ASMB012-3926-1554
Manufacturer: Sony
Device name: ASMB012
Pack Lot Code: 0001
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0303
Charge Information:
Charge remaining (mAh): 4811
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 5202
Health Information:
Cycle count: 91
Condition: Good
Battery Installed: Yes
Amperage (mA): 1342
Voltage (mV): 12530
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 20
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 20
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 3
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
Charging: Yes

tsenga88 wrote:
i have the same problem as well...but in my case water spilled on my macbook i let dry it for a day and when i switched it on it went on butwent off after about an hour..and ever since then every time i connect the charger it turnsoff and some times it just doesnt charge at all...please help
You don't have the same problem, you have the 'I damaged my Mac by spilling water on it' problem.
it will probably fail.
Take it to an Apple Store.

Yosemite frozen for a few seconds after wake from sleep

So I open up the lid of my late 2012 Macbook Pro Retina and I instantly see whatever it was I was seeing before closing it, but I can't do anything for anywhere between 3 and 10 seconds... The problem exists whether my Macbook goes to hibernation or not (my sleep delay is set to a loooooong interval). I've already tried PRAM and SMC reset, tried a fresh install of Yosemite from recovery, etc. Nothing seems to change this behaviour. Maybe this problem is just too high profile and I'm whining about non-issues here, but this hasn't ever happened before, on any other Mac OS version I've ever had. And quite frankly, that sweet instant wake-from-sleep is something I was always proud of as a mac user. ;-) Now my mac is starting to behave like every Windoze version... ever! What gives?!
(PS: I have a Transcend JetDrive 720 480GB upgrade built in but the problem existed before the upgrade. And I'm running Yosemite 10.10.3 but that upgrade also had no impact on the issue.)

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1307 ' 0.5 0.25 50 1000 15 5120 1000 25000 6 6 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1536 500 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 25 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:lifetime:sampled:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:Energy:Energy:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n    ...and %d more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'size (B): %d\n    '"${k[22]}"'checksum: %d\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 1591517921 676087606 1445213025 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of|yc/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/ { print;n++;} END{if(n<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt|xpc)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt|xpc))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} !/:/&&!$2{print "'${k[23]}'"} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { if(a[2]) next;split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1==9||$1==10 { "ps -c -ouid -p"$4"|sed 1d"|getline $4;} $1<11 { o[$1]=o[$1]"\n    "$3" (UID "int($4)"): "$2;} $1==11&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==12&&$5 { "ps -c -ocomm -p"$5"|sed 1d"|getline n;if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[34]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<15;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"stat -f%z "F|getline S;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,S,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/ .+:/||!b) b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+$$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/://;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8,9,10}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li|Tu).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub(/["\\]/,"",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;} END { if(i) print h;for(j=0;j<'${p[24]}';j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' {,1d\;}'/r%/,/^$/p' ' NR==1{next} NR>11||!$0{exit} {print $NF"\f"substr($0,1,32)"\f"$(NF-7)} ' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' '1;END { exit "find /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom -mtime -'${p[23]}'s"|getline;} ' ' NR<='${p[26]}' { o=o"\n"$0;next;} { o="";exit;} END{print o|"sed 1d"} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname powermetrics codesign );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|succ|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|s ful|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"11\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"12\f%@d\f%s\f%d\f%d\n\",@d);printa(\"13\f%@d\f%s\f%d\f%d\n\",@e);printa(\"14\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag $ -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*{,/*} .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} '~ "kMDItemKind=Package"' '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err|disk.+abo','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'M -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |ect pas|fmfd|Goog|ksho|ndum|obso|realp|rned f|/root|sandbox ex" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,{gui,user}/$UID} '-n1 --show-initial-usage --show-process-energy' -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' '/A* -type d -name *.app -prune ! -user 0' -vv );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {System,Login,Agent,User}' services '{load,disabl}ed {Admin,Root}\ access Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space Stylesheet Library\ paths{,' ('{shell,launchd}\)} Data\ packages Modifications );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2 F;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 31;B1&&! B2&&C2 32;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};B2&&{ A1 43 85 117;B3 29;B4 0 0 119 76 81 45;C0;B4 29 0 118 119 76 82 45;C0;    };D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 74 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 75;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 120;B3 18;A1 33 60 121;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 86 114;j=$?;for i in 0 1 2;do ((i==2&&j==1))&&break;((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74||continue;B7 11;B4 0 0 11;C3 $((23+i*(1+i+2*j)));D4 $((24+i*(1+i+2*j))) 18-4*j 82+i-16*j $((112+((3-i)*i-40*j)/2));done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 72 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;D4 76 24 38;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 87 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B6 14 0 4;C3 67;A1 24 75 74;B4 1 1 122||B7 12;B4 0 0 123;B3 23;A2 39 57 30;B6 23 0 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 73;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;A1 4 88;D5 77 44 89;D4 7 11 6;D0 0 N1+18 109;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Automatically wake from sleep when lid closed?

I would like my MBP to wake from sleep when the lid is closed (no external monitor attached) in the middle of the night to initiate a backup to another computer. Is it possible to get the computer to wake up with closed and nothing attached? Do I need a third-party app to do this?
Thanks
Brian

But, that won't wake the computer up if the lid is closed and nothing else is hooked up to it. I want to wake it up in the middle of the night when the lid is closed and it is hooked up to a power supply.

White iMac don't wake from sleep

Hi,
I have a white iMac 17" that is working very well, except for one thing: if it falls on sleep mode, sometimes it won't wake up.
This computer had a Lion fresh install a few month ago, so I do not think it is a software issue. It looks like something hardware that makes it not wake from sleep.
any idea what's wrong and how to repair this?
Thanks

10.7.3 did not cause your problem. Log into another account on your computer and see if the problem is replicated. If you don't have a second user account then create one. If the problem isn't replicated then you have a software problem that you need to track down in your normal user account.

MBP Wake from Sleep - VRAM corruption

Just moved from G4 -> MBP. When the computer goes to sleep, ~20% of the time when I wake from sleep (opening the screen), I get a flurry of ASCII like characters that move across the screen forever, only cleared by a hard reboot (maybe a soft reboot if I could see the underlying graphics window, but I cannot).
Any thoughts... my guess is a bad graphics card, anyone else have this problem or have an idea?

I had a similar issue. Wake from sleep sometimes the computer would reload but the screen would simply not turn on...
Just had my MLB replaced for the whine issue and that issue appears to be gone as well...with the MLB, you get a new CPU and GPU as well.
Macbook Pro 2ghz Mac OS X (10.4.7)

New iMac wakes from sleep sluggishly and requires password despite preference setting

My new iMac (Core i7) wakes from sleep very sluggishly and it requires a password despite the fact that I have de-selected this option in Preferences.
I have a new iMac. I used Migration Assistant to move everything from my older Mac Pro, which was running Lion. Under the Secucrity settings in Preferences, I de-selected "Require Password."
I use a bluetooth mouse and wireless keyboard. Typically I click the mouse to wake up my Mac. The screen comes to life and the cursor moves with the mouse, but...how can I explain this? When I move the mouse in this situation, the cursor paints a gray swath over the desktop screen. It looks like I am using a paint program.
After clicking the mouse repeatedly the computer becomes responsive and the password entry screen appears--most of the time. I have tried to set it up so a password is not required, but usually I get this screen. SOMETIMES, it behaves correctly--say one-fourth of the time.
Another problem... When I shut the iMac off and then back on, it does not always link to my Apple bluetooth mouse. I have to connect a USB mouse and re-link the wireless mouse.
I wonder if this is a software/OS issue. My old Mac Pro had similar wake-up issues, and I wonder if Migration Assistant transferred them to my new machine.
Your thoughts and great ideas are appreciated.
John Graham
Fort Collins, CO

I too am having trouble with my bluetooth mouse after upgrading to 10.7.2 and the associated iOS 5 upgrades. The mouse keeps losing its connection. I've turned bluetooth off, trashed the preferences, rebooted and repaired both the keyboard and mouse but the mouse keeping dropping out. Keyboard seems ok. Anyone have any ideas?
Len

MBP Wakes From Sleep With Lid Shut

My MacBook Pro (only about 1 1/2 months old) wakes from sleep while the lid is shut. I close the lid to put the computer in sleep mode and wait until it has fully entered sleep mode (the white light pulsates). If I then pick the computer up and rotate it some, more often than not it sounds as if the hard drive kicks back on and the apple logo on the top of the screen briefly illuminates. Sometimes I have even noticed that the screen will illuminate; however, the most consistent things I've noticed are the hard drive and logo. This is all while the lid is still closed.
I spent around 1 1/2 hours on the phone with Apple support yesterday with no result. I thought I would see if anyone has an explanation or idea here before I send the computer off to Apple.

Hi again,
your statements that the workaround does not "work around"
on your machines confuses me a bit. It looks like the changes
in the com.apple.PowerManagement file don't produce the desired
effect.
First question: Did you restart your computers after having
applied the changes ? If not, try this first.
Can it depend on the model of MBP (I have the new Santa Rosa) ?
If I save the file as an ASCII file it looks like this:
ActivePowerProfiles = {"AC Power" = -1; "Battery Power" = -1; };
"Custom Profile" = {
"AC Power" = {
"Automatic Restart On Power Loss" = 0;
"Disk Sleep Timer" = 0;
"Display Sleep Timer" = 0;
"Display Sleep Uses Dim" = 0;
"Hibernate File" = "/var/vm/sleepimage";
"Hibernate Mode" = 3;
"Mobile Motion Module" = 1;
"System Sleep Timer" = 0;
"Wake On AC Change" = 0;
"Wake On Clamshell Open" = 0;
"Wake On LAN" = 0;
"Battery Power" = {
"Disk Sleep Timer" = 10;
"Display Sleep Timer" = 5;
"Display Sleep Uses Dim" = 1;
"Hibernate File" = "/var/vm/sleepimage";
"Hibernate Mode" = 3;
"Mobile Motion Module" = 1;
ReduceBrightness = 0;
"System Sleep Timer" = 15;
"Wake On AC Change" = 0;
"Wake On Clamshell Open" = 0;
System Profiler says:
Einstellungen für Stromversorgung des Systems:
Netzbetrieb:
Ruhezustand des Systems (nach Anzahl von Minuten): 0
Ruhezustand der Festplatte (nach Anzahl von Minuten): 0
Ruhezustand des Monitors (nach Anzahl von Minuten): 0
Bei Stromverlust automatisch neu starten: Nein
Ruhezustand bei Änderung der Stromversorgung beenden: Nein
Ruhezustand beim Öffnen des Computers beenden: Nein
Ruhezustand bei administrativen Netzwerk-Zugriffen beenden: Nein
Zum Ruhezustand des Monitors den Monitor abdunkeln: Nein
Batteriebetrieb:
Ruhezustand des Systems (nach Anzahl von Minuten): 15
Ruhezustand der Festplatte (nach Anzahl von Minuten): 10
Ruhezustand des Monitors (nach Anzahl von Minuten): 5
Ruhezustand bei Änderung der Stromversorgung beenden: Nein
Ruhezustand beim Öffnen des Computers beenden: Nein
Zum Ruhezustand des Monitors den Monitor abdunkeln: Ja
Helligkeit verringern: Nein
(German only, sorry)
And - I checked it just a minute ago - i works ! My MBP
goes to sleep when lid is shut and does NOT wake, when I
open the lid. After pressing a key, it comes to life again.
Regards,
Robert
P.S. Please have a look at the files in the
Library/Preferences/System Configuration Folder.
Is there only one file for Energy preferences or
did your system create another one, when you tried
to change settings via System Preferences ? I saw
this one time a few weeks ago, but I don't know
the exact conditions under which that happened.
Message was edited by: gandalf22

New macbook pro wont wake from sleep

Hi everyone, I got the new macbook pro 15 inch with retina display about a month ago, the problem is it will not wake from when the screen goes to sleep, not all the time but enuff for me to want to throw it out the window, when it is in sleep mode i go to touch the touch pad then the keybord lights up like its about to work then dies and i end up tuning the computer off from the off button.
I have been on the phone with apple for many hours and its doing my head in and losing my mind and they have done a re set, a re install and also after that didnt work we wiped the computer and downloaded the software directley from apple and started fresh again " AND STILL DOES NOT WAKE FROM SLEEP " i have taken it back to jb hifi where i got it from in Liverpool westfields and they said sorry we cant help you and apple are saying you have to take the computer to apple and leave it with them for a few weeks, very hard for me as i use the computer everyday to run my business and i feel ripped off big time they should replace it straight away.
Has anyone had this problem before ? any ideas ? thank you very much for you time. Dave

Apple has replaced systems for others after several tries at repairs have failed. Find an Apple Authorized Service Provider and take it in for service, as Apple support directed. Apple would have replaced the system outright in the first 14 days of ownership. After that, you need to give them the opportunity to repair it under warranty.
Since you use it for business, have you asked if the Apple Authorized Service Provider can provide a loaner? Or considered renting one for the short period it would be repaired? Or talked to the Apple Authorized Service Provider about expediting repair?

MBP w/R glitchy wake from sleep.

When my late 2013 Retina MBP wakes from sleep I have this horrible glitchy screen flash up before asking me to enter my password as normal, it doesn't cause any problems, it just shouldn't happen. It doesnt' appear however if I close the lid, and open it back up within roughly 5 minutes, it must be left. I am running the latest general release of mavericks. Is anyone else experiencing this? If so any ideas as to the cause?

Try a SMC reset. It controls sleep/wake events among other things.
DALE

I'm booting from a new LaCie Thunderbolt SSD and it won't wake from sleep.

As my boot drive I have a new 1TB LaCie Thunderbolt SSD Disk. It's connected to a 27" 2.7 GHz Intel i5 iMac (mid 2011). I'm running OS X 10.8.2. Nothing else is connected on Thunderbolt.
Everything runs fine and very fast, with the one exception of not waking from sleep.
When I try to wake it up, the screen illuminates and the desktop is not completely frozen: I can drag windows around, but I can't open applications or do anything with the Finder. I get a spinning beachball if I move the cursor over the menu bar at the top. The only option is to restart.
I've contacted LaCie and they say their devices are "storage devices" and not "system drives". Yet I've been running my system from a 1TB LaCie D2 for at least a couple of years. I pointed out to LaCie support that nowhere on the box does it say their devices are for storage only.
Any suggestions?

@Kappy - not the most useful of replies mate to be honest.After all, there is a strong possibility that this has everything to do with the way OS X and the thunderbolt interface handle wake from sleep states.
@kbrine:
I am having exactly the same problem but with slightly different hardware:
iMac 27 (mid-2011) with Mountain Lion 10.8.2
Booting from a Crucial M4 SSD in an OWC SATA enclosure connected to a Lacie eSata thunderbolt hub (which is connected to the iMac).
In normal use the drive is super fast and works really well.
But my problem is exactly as you describe, put the machine into sleep, and on wake everything appears to come back ok however you can't open apps from the dock and the spinning beachball appears. You can't do anything else and you have to reboot.
Now the interesting thing is that if I put the machine to sleep and then wake it up again within 1 minute everything works perfectly. After a longer period of time - and I'm presuming when the energy saving profile moves to a deeper sleep state (I don't know for sure so speculation from me here) - I get the problem we are having and I have to reboot.
Here's what I've tried so far:
Updated my SSD to the latest firmware.
No firmware updates available for the OWC enclosure nor the Lacie eSata hub (at least, not that I could find)
Turned off bluetooth (others on this forum had a problem with BT interfering with Thunderbolt displays coming back on after sleep)
Turned off 'Automatic Brightness Adjust' (again, based on Thunderbolt Display problems that others have reported)
I've tried out AutoEJECT and Jettison apps that unmount all external drives and re-mount them when waking from sleep. They've made absolutely no difference. Save yourself a few $$ and don't bother buying them from the App Store.
I've tried unplugging and re-inserting the Thunderbolt cable connecting my eSata hub to the iMac. No effect.
And that's as far as I've got. There are only two things left for me to try:: disable 'Power Nap' which - apparently - can also cause problems with Thunderbolt devices during sleep. But I'm not confident with that being the solution. Turn the power off to the Crucial M4 when the problem occurs and then re-power it in the hope that it causes some sort of refresh of the connection to happen. Again, not sure that's a good solution either as I don't want to be powering down my SSD every time I bring the iMac out of sleep!!!
So I too am open to ideas and opinions on what might be causing these wake-from-sleep problems arising when Mac OS is booted from an external thunderbolt drive.

New MBP instantly wakes from sleep...any thoughts?

Similar Messages

Maybe you are looking for