New MBP Wi-Fi Issue. Plz Help

Bought a MPB 13" that sees my network, accepts the password, and just shows an exclamation point over the wi-fi icon. Have restarted over and over.
Everything else in the house logs on the network just fine (15" MBP Retina, iPad Air, iPad Mini, iPhones, etc.).
Little guidance here please. Thank you!

GTCA,
does your router filter access by MAC address? If so, then you should add your MacBook Pro’s MAC address to your router’s whitelist of acceptable MAC addresses.

Similar Messages

Boot camp 5.0.1 aways crash when i try to create a partition for windows. My mac is new MBP retina.Any one can help me?

boot camp 5.0.1 aways crash when i try to create a partition for windows. My mac is new MBP retina.Any one can help me?

boot camp 5.0.1 aways crash when i try to create a partition for windows. My mac is new MBP retina.Any one can help me?

Hi iam using IPHONE4 , when i coonect it to my PC , itunes get hang and don't detect my iphone , how i can sort out this issue plz help me

Hi iam using IPHONE4 , when i coonect it to my PC , itunes get hang and don't detect my iphone , how i can sort out this issue plz help me

iPhone, iPad, or iPod touch not appearing in iTunes

ISSUE-PLZ HELP

When the user Miro Generating:-
1. Give the Ref.No.Business places,
service Sheet No.
and the G/L No.. its take in production server,
But here actual its upated Medical Aid,G/l
But its comes in Rawmaterial exemption,account i.e not relevant account
actual Here its comes in G/L medical account
How its overthe issue plz help for me.
2.In before indevelopment server do that same thing in DEvelopment server, its Give the Error mesage i.e DELIVRY NOT SERIVICE ETNRY SHEET ..............(number) doest not exit

Hello,
There are several public KB articles that may apply to your situation. But, rather than try and list them all here for you, I suggest you go here:
http://btsc.webapps.blackberry.com/btsc/microsites/microsite.do
Search on the exact error message and see any of the resulting articles are on point to your situation.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

New MBP wifi connectivity issues

Recently bought a new MBP about 2-3 months ago and I've noticed almost the entire time I've had it I have always had issues with the wifi constantly timing itself out. I know for a fact that this is not related to my router or ISP as I have other computers on the same network that don't run into these issues. This computer has also been tested with the same results on other wifi connections. I am currently using OS X 10.8.2 on a 15in, mid 2012 model. This issue is very frustrating. I notice this issue during everything I do from Online computer games (WoW) where the connection will just drop to basic web page browsing such as navagating to this page which was a task in itself. I constantly have to turn the wifi off and back on again to refresh the connection and to load web pages.

Same problem, no solution yet!

ALV issue plz help

Hi experts
plz help
i have createed an alv using slis method
in the output there must come a header
in this header i ill have to show som details
like on the left side of the header i want to show the details of the user and on the right side i want to show he data of vendor .
i am able to get the data in the left side but i am not able to show the data of vendor on the right side
the data of vendor is by default coming on left side only just below the details of user but i want to show those details on the right side of the header .
plz tell me how to do it .
thanx in advance.

Hi Anit,
I am attaching here the whole Code. It is somewhat big code so go through it thoroughly.If you still face problem reply this thread otherwise REWARD POINT.
REPORT test
 MESSAGE-ID zzrefn01
 NO STANDARD PAGE HEADING
 *** Portrait: 93x80
 LINE-SIZE 150
 LINE-COUNT 80.
 *** Landscape: 132x65
 LINE-SIZE 132
 LINE-COUNT 65.
 INCLUDES **
INCLUDE zbc_i00. "Customer Standard Include
INCLUDE <icon>. "For Button on the ALV Tool Bar
INCLUDE yyef_check_isp_top.
INCLUDE yyef_check_isp_f01.
INCLUDE yyef_check_isp_o01.
INCLUDE yyef_check_isp_i01.
 CLASS zcl_event_handler IMPLEMENTATION
CLASS zcl_event_handler IMPLEMENTATION.
Top-of-page event
METHOD top_of_page.
 PERFORM event_top_of_page
 USING z_dyndoc_id.
ENDMETHOD. "METHOD top_of_page
Change Status Button
METHOD handle_toolbar.
 IF NOT pa_prodr IS INITIAL.
 DATA: lz_toolbar TYPE stb_button.
 CLEAR lz_toolbar.
 MOVE 'CHANGE_STATUS' TO lz_toolbar-function.
 MOVE text-001 TO lz_toolbar-text.
 APPEND lz_toolbar TO e_object->mt_toolbar.
 ENDIF. "IF NOT pa_prodr IS INITIAL
ENDMETHOD. "METHOD handle_toolbar
Handle User Command
METHOD handle_user_command.
 CASE e_ucomm.
 WHEN 'CHANGE_STATUS'.
 LOOP AT it_output
 INTO wa_output.
 IF wa_output-chk_box EQ kc_x.
 z_flag = 1.
 EXIT.
 ENDIF. "IF wa_output-chk_box EQ kc_x
 ENDLOOP. "LOOP AT it_output INTO wa_output
 IF z_flag EQ 1.
 PERFORM display_selected_data.
 ELSE.
 MESSAGE i001(zzrefn01)
 WITH text-023.
 ENDIF. "IF z_flag EQ 1
 ENDCASE. "CASE e_ucomm
ENDMETHOD. "METHOD handle_user_command
ENDCLASS. "zcl_event_handler IMPLEMENTATION
 Processing of selection screen **
 First time initialization *
 Get Default variant *
INITIALIZATION.
z_repid = sy-repid.
PERFORM variant_init.
zx_variant = z_variant.
CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
 EXPORTING
 i_save = kc_u
 CHANGING
 cs_variant = zx_variant
 EXCEPTIONS
 wrong_input = 1
 not_found = 2
 program_error = 3
 OTHERS = 4.
IF sy-subrc EQ 0.
 pa_vari = zx_variant-variant.
ELSE.
 MESSAGE i001(zzrefn01)
 WITH text-021.
ENDIF. "IF sy-subrc EQ 0
*** First time initialization in online mode except calls with variant
*** (is not processed on return from prog to selection screen)
pa_xyz = ....
so_xyz.....
SET PF-STATUS 'STAT1000'.
*** An example for select options restrictions is available
*** in TT1/YYKA_EXPORT_START_HOST (remove comment)
 Selection screen PBO *
 Comment........ *
AT SELECTION-SCREEN OUTPUT.
*** Init selection screen, also on variants
*** (only for online reports)
IF NOT zn_init_seldynp IS INITIAL
AND sy-batch IS INITIAL "Not on batch calls (e.g. AutoSys)
AND sy-slset IS INITIAL. "Not on calls with variant
 IF NOT pa_prodr IS INITIAL.
 CLEAR: pa_prodr.
 MESSAGE w999(zbcc). "Flag prod.run reseted
 ENDIF.
 CLEAR: pa_start.
ENDIF.
CLEAR: zn_init_seldynp.
*** Process dynpro fields
LOOP AT SCREEN.
*** --> Read-Only fields
 IF screen-group1 EQ 'RDO'
 AND screen-input NE '0'
 AND screen-group3 NE 'VPU'.
 screen-input = '0'.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
 Selection screen PAI *
 Comment........ *
*AT SELECTION-SCREEN ON so_xyz.
AT SELECTION-SCREEN.
PERFORM pai_of_selection_screen.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pa_vari.
PERFORM f4_for_variant.
PERFORM btci_at_sel_screen. "Call BTCI checks (optional)
 Program **
 Main routine *
START-OF-SELECTION.
PERFORM fetch_data.
PERFORM build_data.
PERFORM prepare_field_catalog
 CHANGING it_fieldcat.
CALL SCREEN 100.
 End routine *
END-OF-SELECTION.
 Interactive Reporting **
 Comment........ *
AT LINE-SELECTION.
*** Good example in TT1/YIIHART (remove comment)
 Comment........ *
AT USER-COMMAND.
PERFORM handle_user_command.
 Comment........ *
AT PFN.
iNCLUDE YYEF_CHECK_ISP_F01
*& Include YYEF_CHECK_ISP_F01 *
*& Form pai_of_selection_screen
 Check Variant Exist or not
FORM pai_of_selection_screen .
IF NOT pa_vari IS INITIAL.
 MOVE z_variant TO zx_variant.
 MOVE pa_vari TO zx_variant-variant.
 CALL FUNCTION 'LVC_VARIANT_EXISTENCE_CHECK'
 EXPORTING
 i_save = kc_u
 CHANGING
 cs_variant = zx_variant
 EXCEPTIONS
 wrong_input = 1
 not_found = 2
 program_error = 3
 OTHERS = 4.
 IF sy-subrc EQ 2.
 MESSAGE i001(zzrefn01)
 WITH text-024.
 ENDIF. "IF sy-subrc EQ 2
 z_variant = zx_variant.
ELSE.
 PERFORM variant_init.
ENDIF. "IF NOT pa_vari IS INITIAL
ENDFORM. "pai_of_selection_screen
*& Form variant_init
 Initialization of Variant
FORM variant_init .
CLEAR z_variant.
z_variant-report = z_repid.
ENDFORM. " variant_init
*& Form f4_for_variant
 F4 Help for Layout
FORM f4_for_variant .
CALL FUNCTION 'LVC_VARIANT_F4'
 EXPORTING
 is_variant = z_variant
 i_save = kc_u
 IMPORTING
 e_exit = z_exit
 es_variant = zx_variant
 EXCEPTIONS
 not_found = 1
 program_error = 2
 OTHERS = 3.
IF sy-subrc EQ 1.
 MESSAGE i001(zzrefn01)
 WITH text-022.
ELSE.
 IF z_exit = space.
 pa_vari = zx_variant-variant.
 ENDIF. "IF z_exit = space
ENDIF. "IF sy-subrc EQ 1
ENDFORM. "f4_for_variant
*& Form fetch_data
 Fetch data from DB tables.
FORM fetch_data .
SELECT *
 FROM yyeft1200
 INTO TABLE it_yyeft1200
 WHERE id_rech IN so_idrec
 AND fnumkred IN so_fnumk
 AND status IN so_stat
 AND erdat IN so_erdat
 ORDER BY PRIMARY KEY.
IF sy-subrc EQ 0.
 SELECT *
 FROM yyeft1201
 INTO TABLE it_yyeft1201
 FOR ALL ENTRIES IN it_yyeft1200
 WHERE id_rech EQ it_yyeft1200-id_rech
 AND artnr_bp IN so_artnr
 ORDER BY PRIMARY KEY.
 IF sy-subrc EQ 0.
 SELECT *
 FROM yyeft1008
 INTO TABLE it_yyeft1008
 FOR ALL ENTRIES IN it_yyeft1201
 WHERE bp_refnr EQ it_yyeft1201-bprefnr.
 IF sy-subrc EQ 0.
 SORT it_yyeft1008[] BY bp_refnr.
 ENDIF. "IF sy-subrc EQ 0.
 ENDIF. "IF sy-subrc EQ 0.
ELSE.
 zn_cancel = kc_x.
ENDIF. "IF sy-subrc EQ 0.
ENDFORM. " fetch_data
*& Form build_data
 Gather the data from all the internal tables into one.
FORM build_data .
LOOP AT it_yyeft1200
 INTO wa_yyeft1200.
 CLEAR wa_output.
 wa_output-id_rech = wa_yyeft1200-id_rech.
 wa_output-fnumkred = wa_yyeft1200-fnumkred.
 wa_output-status = wa_yyeft1200-status.
 wa_output-erdat = wa_yyeft1200-erdat.
 wa_output-bukrs = wa_yyeft1200-bukrs.
 wa_output-belnr = wa_yyeft1200-belnr.
 wa_output-gjahr = wa_yyeft1200-gjahr.
 IF wa_yyeft1200-status GE kc_status10
 AND wa_yyeft1200-belnr IS INITIAL.
 wa_output-com_delfnd = 'FI Doc NOT found'(t03).
 ENDIF.
 IF wa_yyeft1200-status LT kc_status10
 AND NOT wa_yyeft1200-belnr IS INITIAL
 AND wa_output-com_delfnd IS INITIAL
 AND NOT pa_det IS INITIAL.
 wa_output-com_delfnd = 'FI Doc should be empty'(t01).
 ENDIF.
 LOOP AT it_yyeft1201
 INTO wa_yyeft1201
 WHERE id_rech EQ wa_yyeft1200-id_rech.
 wa_output-bprefnr = wa_yyeft1201-bprefnr.
 wa_output-lfdat = wa_yyeft1201-lfdat.
 wa_output-artnr_bp = wa_yyeft1201-artnr_bp.
 READ TABLE it_yyeft1008
 WITH KEY bp_refnr = wa_yyeft1201-bprefnr
 BINARY SEARCH
 TRANSPORTING NO FIELDS.
 IF sy-subrc EQ 0.
 LOOP AT it_yyeft1008
 INTO wa_yyeft1008
 FROM sy-tabix.
 IF wa_yyeft1008-bp_refnr NE wa_yyeft1201-bprefnr.
 EXIT.
 ENDIF.
 wa_output-id_anlief = wa_yyeft1008-id_anlief.
 IF NOT pa_det IS INITIAL
 OR NOT wa_output-com_delfnd IS INITIAL.
 APPEND wa_output TO it_output.
 ENDIF.
 ENDLOOP. "LOOP AT it_yyeft1008
 ELSE.
 CLEAR wa_output-id_anlief.
 wa_output-com_delfnd = 'Deliv. NOT found'(t06).
 APPEND wa_output TO it_output.
 ENDIF.
 ENDLOOP. "LOOP AT it_yyeft1201
 IF sy-subrc NE 0.
 wa_output-com_delfnd = 'No Detail records in YYEFT1201'(e01).
 APPEND wa_output TO it_output.
 ENDIF. "IF sy-subrc NE 0.
ENDLOOP. "LOOP AT it_yyeft1200
Checkbox Editable for Production Run
IF pa_prodr IS INITIAL.
 LOOP AT it_output
 INTO wa_output.
 zs_style-fieldname = 'CHK_BOX'.
 zs_style-style = cl_gui_alv_grid=>mc_style_disabled.
 INSERT zs_style INTO TABLE wa_output-celltab.
 MODIFY it_output FROM wa_output
 TRANSPORTING celltab.
 ENDLOOP. "LOOP AT it_output INTO wa_output.
ENDIF. "IF pa_prodr IS INITIAL
LOOP AT it_output
 INTO wa_output.
 IF wa_output-status GE kc_status10
 AND wa_output-belnr IS INITIAL
 AND NOT pa_prodr IS INITIAL.
 zs_style-fieldname = 'CHK_BOX'.
 zs_style-style = cl_gui_alv_grid=>mc_style_enabled.
 INSERT zs_style INTO TABLE wa_output-celltab.
 MODIFY it_output FROM wa_output
 TRANSPORTING celltab.
 ENDIF. "IF wa_output-status GE kc_status10
ENDLOOP. "LOOP AT it_output INTO wa_output
ENDFORM. "build_data
*& Form prepare_field_catalog
 Field Catalog Preparation
 <--PIT_FIELDCAT Field catalog
FORM prepare_field_catalog
 CHANGING pit_fieldcat TYPE lvc_t_fcat.
DATA: ls_fcat TYPE lvc_s_fcat.
IF it_output1 IS INITIAL.
Check Box
 CLEAR ls_fcat.
 ls_fcat-fieldname = 'CHK_BOX'.
 ls_fcat-datatype = 'CHAR'.
 ls_fcat-intlen = '1'.
 ls_fcat-edit = kc_x.
 ls_fcat-coltext = text-014.
 ls_fcat-checkbox = kc_x.
 ls_fcat-outputlen = '5'.
 APPEND ls_fcat TO pit_fieldcat.
ENDIF. "IF it_output1 IS INITIAL
ID RECH
CLEAR ls_fcat.
ls_fcat-fieldname = 'ID_RECH'.
ls_fcat-outputlen = '10'.
ls_fcat-coltext = text-002.
APPEND ls_fcat TO pit_fieldcat.
BP Reference
CLEAR ls_fcat.
ls_fcat-fieldname = 'BPREFNR'.
ls_fcat-outputlen = '15'.
ls_fcat-coltext = text-003.
APPEND ls_fcat TO pit_fieldcat.
Delivery date
CLEAR ls_fcat.
ls_fcat-fieldname = 'LFDAT'.
ls_fcat-outputlen = '10'.
ls_fcat-coltext = text-004.
APPEND ls_fcat TO pit_fieldcat.
Article
CLEAR ls_fcat.
ls_fcat-fieldname = 'ARTNR_BP'.
ls_fcat-outputlen = '18'.
ls_fcat-coltext = text-005.
APPEND ls_fcat TO pit_fieldcat.
Account Payable invoice
CLEAR ls_fcat.
ls_fcat-fieldname = 'FNUMKRED'.
ls_fcat-outputlen = '16'.
ls_fcat-coltext = text-006.
APPEND ls_fcat TO pit_fieldcat.
Status
CLEAR ls_fcat.
ls_fcat-fieldname = 'STATUS'.
ls_fcat-outputlen = '2'.
ls_fcat-coltext = text-007.
APPEND ls_fcat TO pit_fieldcat.
Create date
CLEAR ls_fcat.
ls_fcat-fieldname = 'ERDAT'.
ls_fcat-outputlen = '10'.
ls_fcat-coltext = text-008.
APPEND ls_fcat TO pit_fieldcat.
Comment
CLEAR ls_fcat.
ls_fcat-fieldname = 'COM_DELFND'.
ls_fcat-outputlen = '25'.
ls_fcat-coltext = text-009.
APPEND ls_fcat TO pit_fieldcat.
Delivery ID
CLEAR ls_fcat.
ls_fcat-fieldname = 'ID_ANLIEF'.
ls_fcat-outputlen = '10'.
ls_fcat-coltext = text-010.
APPEND ls_fcat TO pit_fieldcat.
Company Code
CLEAR ls_fcat.
ls_fcat-fieldname = 'BUKRS'.
ls_fcat-outputlen = '4'.
ls_fcat-coltext = text-011.
APPEND ls_fcat TO pit_fieldcat.
Accounting Document Number
CLEAR ls_fcat.
ls_fcat-fieldname = 'BELNR'.
ls_fcat-outputlen = '10'.
ls_fcat-coltext = text-012.
APPEND ls_fcat TO pit_fieldcat.
Financial Year
CLEAR ls_fcat.
ls_fcat-fieldname = 'GJAHR'.
ls_fcat-outputlen = '4'.
ls_fcat-coltext = text-013.
APPEND ls_fcat TO pit_fieldcat.
ENDFORM. " prepare_field_catalog
*& Form EVENT_TOP_OF_PAGE
 TOP-OF-PAGE Preparation
 -->z_dyndoc_id Text of TOP-OF-PAGE
FORM event_top_of_page
 USING z_dyndoc_id TYPE REF TO cl_dd_document.
DATA : lz_text(255) TYPE c.
System ID
CLEAR : lz_text.
CONCATENATE text-015
 sy-sysid
 INTO lz_text
 SEPARATED BY space.
PERFORM add_text
 USING lz_text.
CALL METHOD z_dyndoc_id->new_line.
Title
CLEAR : lz_text.
CONCATENATE text-016
 sy-title
 INTO lz_text
 SEPARATED BY space.
PERFORM add_text
 USING lz_text.
CALL METHOD z_dyndoc_id->new_line.
Date
CLEAR : lz_text.
WRITE sy-datum TO lz_text.
CONCATENATE text-017
 lz_text
 INTO lz_text
 SEPARATED BY space.
PERFORM add_text
 USING lz_text.
CALL METHOD z_dyndoc_id->new_line.
User ID
CLEAR : lz_text.
CONCATENATE text-018
 sy-uname
 INTO lz_text
 SEPARATED BY space.
PERFORM add_text
 USING lz_text.
CALL METHOD z_dyndoc_id->new_line.
Time
CLEAR : lz_text.
WRITE sy-uzeit TO lz_text.
CONCATENATE text-019
 lz_text
 INTO lz_text
 SEPARATED BY space.
PERFORM add_text
 USING lz_text.
CALL METHOD z_dyndoc_id->new_line.
Program Name
CLEAR : lz_text.
WRITE sy-repid TO lz_text.
CONCATENATE text-020
 lz_text
 INTO lz_text
 SEPARATED BY space.
PERFORM add_text
 USING lz_text.
CALL METHOD z_dyndoc_id->new_line.
Populating data to TOP-OF-PAGE
PERFORM top-of-page.
ENDFORM. " EVENT_TOP_OF_PAGE
*& Form ADD_TEXT
 Add Text To TOP-OF-PAGE
FORM add_text
 USING p_text TYPE sdydo_text_element.
CALL METHOD z_dyndoc_id->add_text
 EXPORTING
 text = p_text.
ENDFORM. " ADD_TEXT
*& Form TOP-OF-PAGE
 TOP-OF-PAGE
FORM top-of-page.
CALL METHOD z_dyndoc_id->display_document
 EXPORTING
 reuse_control = kc_x
 parent = z_parent_top
 EXCEPTIONS
 html_display_error = 1.
IF sy-subrc NE 0.
 MESSAGE i001(zzrefn01)
 WITH text-036 ' '.
ENDIF. "IF sy-subrc NE 0
ENDFORM. "TOP-OF-PAGE
*& Form handle_user_command
 Handle the user command
FORM handle_user_command .
DATA lzi_lin TYPE i.
REFRESH ra_id_rech[].
CLEAR ra_id_rech.
ra_id_rech-sign = kc_include.
ra_id_rech-option = kc_equal.
CASE sy-ucomm.
 WHEN kc_ucomm-upd.
 DESCRIBE LIST NUMBER OF LINES lzi_lin.
 DO lzi_lin TIMES.
 CLEAR wa_output.
 READ LINE sy-index
 FIELD VALUE wa_output-chk_box
 wa_output-id_rech.
 IF sy-subrc NE 0.
 EXIT.
 ELSE.
 IF wa_output-chk_box EQ kc_x.
 ra_id_rech-low = wa_output-id_rech.
 APPEND ra_id_rech.
 ENDIF.
 ENDIF.
 ENDDO.
 IF NOT ra_id_rech IS INITIAL.
 SORT ra_id_rech BY low.
 DELETE ADJACENT DUPLICATES FROM ra_id_rech
 COMPARING low.
 IF NOT pa_prodr IS INITIAL.
 UPDATE yyeft1200
 SET status = kc_status00
 WHERE id_rech IN ra_id_rech.
 IF sy-subrc EQ 0.
 MESSAGE s900(zbcc)
 WITH 'Status change successful'(m08)
 space
 space
 space.
 ELSE.
 MESSAGE i900(zbcc)
 WITH 'Status change failed'(m09)
 space
 space
 space.
 ENDIF. "IF sy-subrc EQ 0.
 ELSE.
 MESSAGE i900(zbcc)
 WITH 'TEST RUN: NO databases will be changed'(m03)
 space
 space
 space.
 ENDIF. "IF NOT pa_prodr IS INITIAL.
 ELSE.
 MESSAGE i900(zbcc)
 WITH 'Atleast one line should be selected'(m01)
 'in order to update.'(m02)
 space
 space.
 ENDIF. "IF NOT ra_id_rech IS INITIAL
 WHEN kc_ucomm-back
 OR kc_ucomm-exit
 OR kc_ucomm-cancel.
 LEAVE TO SCREEN 0.
 WHEN OTHERS.
ENDCASE. "CASE sy-ucomm
ENDFORM. " handle_user_command
*& Form display_selected_data
 Display Selected Data
FORM display_selected_data.
LOOP AT it_output
 INTO wa_output
 WHERE chk_box EQ kc_x.
 MOVE-CORRESPONDING wa_output TO wa_output1.
 APPEND wa_output1 TO it_output1.
ENDLOOP. "LOOP AT it_output
call dialog screen and display new alv control
IF NOT it_output1[] IS INITIAL.
 CALL SCREEN 101 STARTING AT 10 5.
ENDIF. "IF NOT it_output1[] IS INITIAL
ENDFORM. " change_status
iNCLUDE YYEF_CHECK_ISP_I01
*& Include YYEF_CHECK_ISP_I01 *
*& Module USER_COMMAND_0100 INPUT
 Handle user command for screen 0100
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
 WHEN kc_ucomm-back.
 LEAVE TO SCREEN 0.
 WHEN kc_ucomm-exit.
 LEAVE TO SCREEN 0.
ENDCASE. "CASE sy-ucomm.
ENDMODULE. "USER_COMMAND_0100 INPUT
*& Module USER_COMMAND_0101 INPUT
 Handle User Command for screen 0101
MODULE user_command_0101 INPUT.
CASE sy-ucomm.
 WHEN kc_ucomm-back.
 LEAVE TO SCREEN 0.
ENDCASE. "CASE sy-ucomm
ENDMODULE. " USER_COMMAND_0101 INPUT
Include YYEF_CHECK_ISP_O01
*& Include YYEF_CHECK_ISP_O01 *
*& Module PBO OUTPUT
 OO ALV Display
MODULE pbo OUTPUT.
CREATE OBJECT z_container
 EXPORTING container_name = kc_container.
Create TOP-Document
CREATE OBJECT z_dyndoc_id
 EXPORTING style = kc_alv.
Create Splitter for custom_container
CREATE OBJECT z_splitter
 EXPORTING parent = z_container
 rows = 2
 columns = 1.
For TOP-OF-PAGE
CALL METHOD z_splitter->get_container
 EXPORTING
 row = 1
 column = 1
 RECEIVING
 container = z_parent_top.
For ALV Display
CALL METHOD z_splitter->get_container
 EXPORTING
 row = 2
 column = 1
 RECEIVING
 container = z_parent_grid.
Set height for g_parent_html
CALL METHOD z_splitter->set_row_height
 EXPORTING
 id = 1
 height = 20.
CREATE OBJECT z_grid
 EXPORTING i_parent = z_parent_grid.
Set Handler for TOP-OF-PAGE
CREATE OBJECT z_handler.
SET HANDLER z_handler->top_of_page FOR z_grid.
z_repid = sy-repid.
z_variant-report = z_repid.
Display ALV
zs_layout-stylefname = kc_style.
CALL METHOD z_grid->set_table_for_first_display
 EXPORTING
 is_layout = zs_layout
 i_save = kc_u
 is_variant = z_variant
 CHANGING
 it_outtab = it_output[]
 it_fieldcatalog = it_fieldcat.
Processing TOP-OF-PAGE Event
CALL METHOD z_grid->list_processing_events
 EXPORTING
 i_event_name = kc_top
 i_dyndoc_id = z_dyndoc_id.
Set handler for ALV Tool Bar
SET HANDLER z_handler->handle_toolbar FOR z_grid.
SET HANDLER z_handler->handle_user_command FOR z_grid.
CALL METHOD z_grid->set_toolbar_interactive.
ENDMODULE. " PBO OUTPUT
*& Module STATUS_0100 OUTPUT
 Set the GUI status
MODULE status_0100 OUTPUT.
SET PF-STATUS kc_status.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module STATUS_0101 OUTPUT
 Display selected records on screen 0101
MODULE status_0101 OUTPUT.
SET TITLEBAR kc_title.
CREATE OBJECT z_container1
 EXPORTING container_name = kc_container1.
CREATE OBJECT z_grid1
 EXPORTING i_parent = z_container1.
PERFORM prepare_field_catalog
 CHANGING it_fieldcat1.
Display ALV
CALL METHOD z_grid1->set_table_for_first_display
 EXPORTING
 is_layout = zs_layout
 CHANGING
 it_outtab = it_output1[]
 it_fieldcatalog = it_fieldcat1.
ENDMODULE. " STATUS_0101 OUTPUT
INCLUDE YYEF_CHECK_ISP_TOP
*& Include YYEF_CHECK_ISP_TOP *
 DATA DEFINITIONS **
 Class declarations *
*class zcl_xyz definition deferred.
CLASS :cl_gui_alv_grid DEFINITION LOAD,
 cl_gui_custom_container DEFINITION LOAD.
 Tables (old SAP style, please avoid and use workareas instead) *
TABLES: yyeft1200,
 yyeft1201.
*tables: xyz.
 Controls *
*controls: ctrl_xyz.
 Types *
TYPES: BEGIN OF ty_output,
 chk_box(1) TYPE c,
 celltab TYPE lvc_t_styl,
 id_rech TYPE yyeft1200-id_rech,
 bprefnr TYPE yyeft1201-bprefnr,
 lfdat TYPE yyeft1201-lfdat,
 artnr_bp TYPE yyeft1201-artnr_bp,
 fnumkred TYPE yyeft1200-fnumkred,
 status TYPE yyeft1200-status,
 erdat TYPE yyeft1200-erdat,
 com_delfnd TYPE char25,
 id_anlief TYPE yyeft1008-id_anlief,
 bukrs TYPE yyeft1200-bukrs,
 belnr TYPE yyeft1200-belnr,
 gjahr TYPE yyeft1200-gjahr,
 END OF ty_output.
TYPES: BEGIN OF ty_output1,
 celltab TYPE lvc_t_styl,
 id_rech TYPE yyeft1200-id_rech,
 bprefnr TYPE yyeft1201-bprefnr,
 lfdat TYPE yyeft1201-lfdat,
 artnr_bp TYPE yyeft1201-artnr_bp,
 fnumkred TYPE yyeft1200-fnumkred,
 status TYPE yyeft1200-status,
 erdat TYPE yyeft1200-erdat,
 com_delfnd TYPE char25,
 id_anlief TYPE yyeft1008-id_anlief,
 bukrs TYPE yyeft1200-bukrs,
 belnr TYPE yyeft1200-belnr,
 gjahr TYPE yyeft1200-gjahr,
 END OF ty_output1.
TYPES: BEGIN OF ty_status,
 id_rech TYPE yyeft1200-id_rech,
 END OF ty_status.
*TYPES-POOLS: xyz.
*TYPES: ty_xyz.
 Internal tables *
*DATA: it_xyz.
DATA: it_yyeft1200 TYPE STANDARD TABLE OF yyeft1200,
 it_yyeft1201 TYPE SORTED TABLE OF yyeft1201
 WITH UNIQUE KEY id_rech posnr,
 it_yyeft1008 TYPE STANDARD TABLE OF yyeft1008,
 it_output TYPE STANDARD TABLE OF ty_output,
 it_output1 TYPE STANDARD TABLE OF ty_output1,
 it_fieldcat TYPE lvc_t_fcat,
 it_fieldcat1 TYPE lvc_t_fcat.
 Workareas *
*DATA: wa_xyz.
DATA: wa_yyeft1200 TYPE yyeft1200,
 wa_yyeft1201 TYPE yyeft1201,
 wa_yyeft1008 TYPE yyeft1008,
 wa_output TYPE ty_output,
 wa_output1 TYPE ty_output1.
*****OO ALV DATA DECLARATION
DATA: zs_style TYPE lvc_s_styl,
 zs_layout TYPE lvc_s_layo,
 z_container TYPE REF TO cl_gui_custom_container,
 z_container1 TYPE REF TO cl_gui_custom_container,
 z_grid TYPE REF TO cl_gui_alv_grid,
 z_grid1 TYPE REF TO cl_gui_alv_grid,
 z_dyndoc_id TYPE REF TO cl_dd_document,
 z_splitter TYPE REF TO cl_gui_splitter_container,
 z_parent_grid TYPE REF TO cl_gui_container,
 z_parent_top TYPE REF TO cl_gui_container.
 Constants *
*constants: kc_xyz value ... "character
*constants: kn_xyz value ... "numeric
*constants: ki_xyz value ... "integer
*constants: kp_xyz value ... "packed
*constants: kx_xyz value ... "hex
CONSTANTS: kc_status00 TYPE yyeft1200-status VALUE '00',
 kc_status10 TYPE yyeft1200-status VALUE '10',
 kc_x TYPE char01 VALUE 'X',
 kc_include TYPE char01 VALUE 'I',
 kc_equal(2) TYPE c VALUE 'EQ',
 kc_status(11) TYPE c VALUE 'ZGUI_STATUS',
 kc_container TYPE char10 VALUE 'ZCONTAINER',
 kc_container1 TYPE char11 VALUE 'ZCONTAINER1',
 kc_u TYPE char01 VALUE 'U',
 kc_top TYPE char30 VALUE 'TOP_OF_PAGE',
 kc_alv TYPE char50 VALUE 'ALV_GRID',
 kc_style TYPE char07 VALUE 'CELLTAB',
 kc_title TYPE char07 VALUE 'ZTITLE'.
CONSTANTS: BEGIN OF kc_ucomm,
 upd TYPE sy-ucomm VALUE 'UPD',
 back TYPE sy-ucomm VALUE 'BACK',
 exit TYPE sy-ucomm VALUE 'EXIT',
 cancel TYPE sy-ucomm VALUE 'CANCEL',
 END OF kc_ucomm.
 Sentence counters *
*data: cnt_xyz type i value 0.
 Calculation variables (Rechenfelder) *
*data: r_xyz.
 Switches *
*data: sw_xyz(1) type n value 0.
 Misc variables *
*DATA: z_xyz.
*** Initialization of parameters at call of/return to
*** selection dynpro (for Online-only-reports)
DATA: zn_init_seldynp(1) TYPE n
 VALUE 1.

Can't transfer old mac contents to new MBP C2D- Firewire issue?

I started my shiny new MBP and went through the usual stuff, until it asked me to boot my old Powerbook G4 (800mHz) in target mode. The setup program did not detect anything via the FW400 cable.
I went ahead anyway and tried to open it from target mode in the finder, but it does not detect it either.
In Network preferences;Network Port Configurations, the option "Built-in Firewire" is greyed out. What does that mean?
Is there something I am missing? Anyone else having issues with firewire?
thanks
Mikka

I am having a similar problem. The only difference is a Firewire icon shows up on my desk top and I can never open it.

Lsmw issue plz help its urgent

Hi Experts ,
i need to create a LSMW using batch input .
but the requirement is on the basis of conditions my recording need to be changed .
dat means
3127POL09 3127POL09-1 CTR 3127-1003E 100 FUL
3127POL09 3127POL09-2 WBS 3127POL01 60 FUL
for ctr i ill have to post data in screen number 200
and for wbs i ill have to post data in screen number 400 .
can we put some conditions in recording in lsmw ?
i no we can create multiple recording but how can we use them to fullfill my requirement .
plz help its urgent
thanx in advance

Hi,
Within LSMW, there is an option to write our own code wherein this code can be incorporated.
This is in the Field Mapping Option...
Just go to the Menu Extras->Layout
and click on the check box Form Routines
Global Data.
Here you can define Global Variables and also perform your ABAP Coding.
Regards,
Balaji.

Should I Return New MBP? Monitor issue

Just bought MBP 15" with the MiniDvi port yesterday, and have a Dell 30" monitor on order. But now, I read all the problems with the adapter. Should I return the MBP or this an isolated problem?

The MBP external display issues are very widespread. The problem isn't the result of the occasional fluke - it seems to be built into the machines. Apple is neither properly recalling entire batches, nor successfully repairing/replacing individual machines. Don't buy a MacBook Pro unless you're going to be happy with a sub-par laptop.
This is the first time 20 years of Apple patronage I've recommended against buying an Apple machine.

Heat issue plz help me out

hi i have tried almost everything i guess ... i cant get NB to get cooler
all temp is fine except NB that one is at sixty degrees in idle
and shuts itself down after a while if i do something etc . playing a game , but works ok still pretty high heat though 57 when open, and with it closed .it shuts down itself after a while
i have also tried to put in two extra chassi fans , didnt help at all and tried to unplug
some stuff to see if its a low power issue .but nope ....still the same way
anyone got any ideas? everything is at 27-33 except that one .... so no fan issue i think .maby a RMA
someone help plz ... i have tried this one for almost two weeks now .... dont have a clue anymore

ive also checked bios ow ...the cpu heat jumps alot up and down
35-42 in a flash ... and down again not stable ...it seems like it almost dont get enough power ... all power voltages jumps like crazy up and down ...
i dont mean small jumps ... cause thats pretty normal ... but not like this ...
i think the heat issue has to do with power got any suggestions on it?
when i play a game or so ... the power use increases of course .. and the cooling also ...i guess at that demand i dont have enough power to cool it .. so it shuts down
maby im fumbling ..but i REALLY wanna get this fixed ...
maby a new board could fix it if not this will? is the troubles related to my mobo?

New MBP boot/sleep issues

I have a new 15" MBP and it occasionally has issues booting where it will get to the gray Apple screen and the spinning circle will freeze. Also when it has been asleep for a while (1+ hour) it will almost always freeze when trying to wakeup. If I force it to sleep or close the lid and immediately revive it, it always works. Is there anything I can try to do to diagnose the issue? I took it to the Apple store and they ran a drive repair and we couldn't reproduce the issue. It did it again on the first boot once I got home.
Thanks in advance.

Welcome to AD!
Well,
there is this Apple doc.
DALE

I am facing a new problem with xml schema, plz help me

Hi @,
I am facing a problem with xml schema validation. Below is my code.
public void initialize(String cfgFileName) {
try {
try {
DOMParserWrapper parser = (DOMParserWrapper)Class.forName("dom.wrappers.DOMParser").newInstance();
parser.setFeature( "http://apache.org/xml/features/dom/defer-node-expansion",true );
parser.setFeature( "http://xml.org/sax/features/validation",true);
parser.setFeature( "http://xml.org/sax/features/namespaces",true );
parser.setFeature( "http://apache.org/xml/features/validation/schema",true );
parser.setFeature( "http://apache.org/xml/features/validation/schema-full-checking",true );
Document document = parser.parse(cfgFileName);
System.out.println("Vijay .. code .. damar\n");
}catch (org.xml.sax.SAXParseException spe) {
} catch (org.xml.sax.SAXNotRecognizedException ex ){
} catch (org.xml.sax.SAXNotSupportedException ex ){
} catch (org.xml.sax.SAXException se) {
if (se.getException() != null)
se.getException().printStackTrace(System.err);
else
se.printStackTrace(System.err);
}catch (Exception e) {
System.out.println("Caught unknown exception : \n");
e.printStackTrace(System.err);
System.out.println("Vijay .. code .. success\n");
DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();
DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
//docBuilder.setErrorHandler(myErrorHandler);
cfg = docBuilder.parse(new File(cfgFileName));
cfg .getDocumentElement ().normalize ();
} catch (Exception e) {
e.printStackTrace();
In the above code I am parsing the xml file and i am doing schema validation. Schema validation is proper and it is validating correctly. Only problem is that, It is validating and showing error correctly correctly but it is not catching that error.
For clear understanding I am printing one statement before parsing and after parsing.
SYSTEM.OUT.PRINTLN("Vijay .. code .. damar\n") this is before parsing
SYSTEM.OUT.PRINTLN("Vijay .. code .. success\n") this is after parsing
Here what is happening means, It is validating correctly and showing error :
[Error] nw_layout-new.xml:800:97: Datatype error: Value 'y' does not match regular expression facet 'yes|no'..
Vijay .. code .. damar
Vijay .. code .. success
Here it is showing error and still continueing not catching.
Plz give solution for this.
Thanks
vijay K

Hello dipthebe,
Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Regards,
-Norm G.

Performance tuning issues -- plz help

Hi Tuning gurus
this querry works fine for lesser number of rows
eg :--
where ROWNUM <= 10 )
where rnum >=1;
but takes lot of time as we increase rownum ..
eg :--
where ROWNUM <= 10000 )
where rnum >=9990;
results are posted below
pls suggest me
oracle version -Oracle Database 10g Enterprise Edition
Release 10.2.0.1.0 - Prod
os version red hat enterprise linux ES release 4
also statistics differ when we use table
and its views
results of view v$mail
[select * from
 ( select a.*, ROWNUM rnum from
 ( SELECT M.MAIL_ID, MAIL_FROM, M.SUBJECT
 AS S1,CEIL(M.MAIL_SIZE) AS MAIL_SIZE,
 TO_CHAR(MAIL_DATE,'dd Mon yyyy hh:mi:ss
 am') AS MAIL_DATE1, M.ATTACHMENT_FLAG,
 M.MAIL_TYPE_ID, M.PRIORITY_NO, M.TEXT,
 COALESCE(M.MAIL_STATUS_VALUE,0),
 0 as email_address,LOWER(M.MAIL_to) as
 Mail_to, M.Cc, M.MAIL_DATE AS MAIL_DATE,
 lower(subject) as subject,read_ipaddress,
 read_datetime,Folder_Id,compose_type,
 interc_count,history_id,pined_flag,
rank() over (order by mail_date desc)
as rnk from v$mail M WHERE M.USER_ID=6 AND M.FOLDER_ID =1) a
 where ROWNUM <= 10000 )
where rnum >=9990;]
result :
11 rows selected.
Elapsed: 00:00:03.84
Execution Plan
0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=14735 Card=10000 B
ytes=142430000)
1 0 VIEW (Cost=14735 Card=10000 Bytes=142430000)
2 1 COUNT (STOPKEY)
3 2 VIEW (Cost=14735 Card=14844 Bytes=211230120)
4 3 WINDOW (SORT) (Cost=14735 Card=14844 Bytes=9114216)
5 4 TABLE ACCESS (BY INDEX ROWID) OF 'MAIL' (TABLE) (C
ost=12805 Card=14844 Bytes=9114216)
6 5 INDEX (RANGE SCAN) OF 'FOLDER_USERID' (INDEX) (C
ost=43 Card=14844)
Statistics
294 recursive calls
0 db block gets
8715 consistent gets
8669 physical reads
0 redo size
7060 bytes sent via SQL*Net to client
504 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
6 sorts (memory)
0 sorts (disk)
11 rows processed
SQL> select count(*) from v$mail;
Elapsed: 00:00:00.17
Execution Plan
0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=494 Card=1)
1 0 SORT (AGGREGATE)
2 1 INDEX (FAST FULL SCAN) OF 'FOLDER_USERID' (INDEX) (Cost=
494 Card=804661)
Statistics
8 recursive calls
0 db block gets
2171 consistent gets
2057 physical reads
260 redo size
352 bytes sent via SQL*Net to client
504 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
1 rows processed
results of original table mail
[select * from
 ( select a.*, ROWNUM rnum from
 ( SELECT M.MAIL_ID, MAIL_FROM, M.SUBJECT
 AS S1,CEIL(M.MAIL_SIZE) AS MAIL_SIZE,
 TO_CHAR(MAIL_DATE,'dd Mon yyyy hh:mi:ss
 am') AS MAIL_DATE1, M.ATTACHMENT_FLAG,
 M.MAIL_TYPE_ID, M.PRIORITY_NO, M.TEXT,
 COALESCE(M.MAIL_STATUS_VALUE,0),
 0 as email_address,LOWER(M.MAIL_to) as
 Mail_to, M.Cc, M.MAIL_DATE AS MAIL_DATE,
 lower(subject) as subject,read_ipaddress,
 read_datetime,Folder_Id,compose_type,
 interc_count,history_id,pined_flag,
rank() over (order by mail_date desc)
as rnk from mail M WHERE M.USER_ID=6 AND M.FOLDER_ID =1) a
 where ROWNUM <= 10000 )
where rnum >=9990;]
result :
11 rows selected.
Elapsed: 00:00:03.21
Execution Plan
0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=14735 Card=10000 B
ytes=142430000)
1 0 VIEW (Cost=14735 Card=10000 Bytes=142430000)
2 1 COUNT (STOPKEY)
3 2 VIEW (Cost=14735 Card=14844 Bytes=211230120)
4 3 WINDOW (SORT) (Cost=14735 Card=14844 Bytes=9114216)
5 4 TABLE ACCESS (BY INDEX ROWID) OF 'MAIL' (TABLE) (C
ost=12805 Card=14844 Bytes=9114216)
6 5 INDEX (RANGE SCAN) OF 'FOLDER_USERID' (INDEX) (C
ost=43 Card=14844)
Statistics
1 recursive calls
119544 db block gets
8686 consistent gets
8648 physical reads
0 redo size
13510 bytes sent via SQL*Net to client
4084 bytes received via SQL*Net from client
41 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
11 rows processed
SQL> select count(*) from mail;
Elapsed: 00:00:00.34
Execution Plan
0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=494 Card=1)
1 0 SORT (AGGREGATE)
2 1 INDEX (FAST FULL SCAN) OF 'FOLDER_USERID' (INDEX) (Cost=
494 Card=804661)
Statistics
1 recursive calls
0 db block gets
2183 consistent gets
2062 physical reads
72 redo size
352 bytes sent via SQL*Net to client
504 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
1 rows processed
Thanks n regards
ps : sorry i could not preserve the format plz
Message was edited by:
Cool_Jr.DBA
Message was edited by:
Cool_Jr.DBA
Message was edited by:
Cool_Jr.DBA
Message was edited by:
Cool_Jr.DBA
Message was edited by:
Cool_Jr.DBA

Just to answer the OP's fundamental question:
The query starts off quick (rows between 1 and 10)
but gets increasingly slower as the start of the
window increases (eg to row 1000, 10,000, etc).
The original (unsorted) query would get first rows
very quickly, but each time you move the window, it
has to fetch and discard an increasing number of rows
before it finds the first one you want. So the time
taken is proportional to the rownumber you have
reached.
With Charles's correction (which is unavoidable), the
entire query has to be retrieved and sorted
before the rows you want can be returned. That's
horribly inefficient. This technique works for small
sets (eg 10 - 1000 rows) but I can't tell you how
wrong it is to process data in this way especially if
you are expecting lacs (that's 100,000s isn't
it) of rows returned. You are pounding your database
simply to give you the option of being able to go
back as well as forwards in your query results. The
time taken is proportional to the total number of
rows (so the time to get to the end of the entire set
is proportional to the square of the total
number of rows.
If you really need to page back and forth
through large sets, consider one of the following
options:
1) saving the set (eg as a materialised view or in a
temp table - and include "row number" as an indexed
column)
2) retrieve ALL the rowids into an array/collection
in a single pass, then go get 10 rows by rowid for
each page
3) assuming you can sort by a unique identifier, use
that (instead of rownumber) to remember the first row
in each page; use a range scan on the index on that
UID to get back the rows you want quickly (doing this
with a non-unique sort key is quite a bit harder)
Remember also that if someone else inserts into your
table while you are paging around, some of these
methods can give confusing results - because every
time you start a new query, you get a new
read-consistent point.
Anyway, try to redesign so you don't need to page
through lacs of rows....
HTH
Regards NigelYou are correct regarding the OP's original SQL statement that:
"the entire query has to be retrieved and sorted before the rows you want can be returned"
However, that is not the case with the SQL statement that I posted. The problem with the SQL statement I posted is that Oracle insists on performing full tablescans on the table. The following is a full test run with 2,000,000 rows in a table, including an analysis of the problem, and a method of working around the problem:
CREATE TABLE T1 (
MAIL_ID NUMBER(10),
USER_ID NUMBER(10),
FOLDER_ID NUMBER(10),
MAIL_DATE DATE,
PRIMARY KEY(MAIL_ID));
 
CREATE INDEX T1_USER_FOLDER ON T1(USER_ID,FOLDER_ID);
CREATE INDEX T1_USER_FOLDER_MAIL ON T1(USER_ID,FOLDER_ID);
 
INSERT INTO
T1
SELECT
ROWNUM MAIL_ID,
DBMS_RANDOM.VALUE(1,30) USER_ID,
DBMS_RANDOM.VALUE(1,5) FOLDER_ID,
TRUNC(SYSDATE-365)+ROWNUM/10000 MAIL_DATE
FROM
DUAL
CONNECT BY
LEVEL<=1000000;
 
INSERT INTO
T1
SELECT
ROWNUM+1000000 MAIL_ID,
DBMS_RANDOM.VALUE(1,30) USER_ID,
DBMS_RANDOM.VALUE(1,5) FOLDER_ID,
TRUNC(SYSDATE-365)+ROWNUM/10000 MAIL_DATE
FROM
DUAL
CONNECT BY
LEVEL<=1000000;
 
COMMIT;
 
EXEC DBMS_STATS.GATHER_TABLE_STATS(OWNNAME=>USER,TABNAME=>'T1',CASCADE=>TRUE)
 
SELECT /*+ ORDERED */
MI.MAIL_ID,
TO_CHAR(M.MAIL_DATE,'DD MON YYYY HH:MI:SS AM') AS MAIL_DATE1,
M.MAIL_DATE AS MAIL_DATE,
M.FOLDER_ID,
M.MAIL_ID,
M.USER_ID
FROM
(SELECT
 MAIL_ID
FROM
 (SELECT
 MAIL_ID,
 ROW_NUMBER() OVER (ORDER BY MAIL_DATE DESC) RN
 FROM
 CUSTAPP.T1
 WHERE
 USER_ID=6
 AND FOLDER_ID=1)
WHERE
 RN BETWEEN 900 AND 909) MI,
CUSTAPP.T1 M
WHERE
MI.MAIL_ID=M.MAIL_ID;
 
| Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | OMem | 1Mem | Used-Mem |
|* 1 | HASH JOIN | | 1 | 8801 | 10 |00:00:15.62 | 13610 | 1010K| 1010K| 930K (0)|
|* 2 | VIEW | | 1 | 8801 | 10 |00:00:00.34 | 6805 | | | |
|* 3 | WINDOW SORT PUSHED RANK| | 1 | 8801 | 910 |00:00:00.34 | 6805 | 74752 | 74752 |65536 (0)|
|* 4 | TABLE ACCESS FULL | T1 | 1 | 8801 | 8630 |00:00:00.29 | 6805 | | | |
| 5 | TABLE ACCESS FULL | T1 | 1 | 2000K| 2000K|00:00:04.00 | 6805 | | | |
 
Predicate Information (identified by operation id):
 1 - access("MAIL_ID"="M"."MAIL_ID")
 2 - filter(("RN">=900 AND "RN"<=909))
 3 - filter(ROW_NUMBER() OVER ( ORDER BY INTERNAL_FUNCTION("MAIL_DATE") DESC )<=909)
 4 - filter(("USER_ID"=6 AND "FOLDER_ID"=1))The above performed two tablescans of the T1 table and required 15.6 seconds to complete, which was not the desired result. Now, to create an index that will be helpful for the query, and provide Oracle an additional hint:
(http://www.oracle.com/technology/oramag/oracle/07-jan/o17asktom.html "Pagination in Getting Rows N Through M" shows a similar approach)
DROP INDEX T1_USER_FOLDER_MAIL;
 
CREATE INDEX T1_USER_FOLDER_MAIL ON T1(USER_ID,FOLDER_ID,MAIL_DATE DESC,MAIL_ID);
 
EXEC DBMS_STATS.GATHER_TABLE_STATS(OWNNAME=>USER,TABNAME=>'T1',CASCADE=>TRUE)
 
SELECT /*+ ORDERED */
MI.MAIL_ID,
TO_CHAR(M.MAIL_DATE,'DD MON YYYY HH:MI:SS AM') AS MAIL_DATE1,
M.MAIL_DATE AS MAIL_DATE,
M.FOLDER_ID,
M.MAIL_ID,
M.USER_ID
FROM
(SELECT /*+ FIRST_ROWS(10) */
 MAIL_ID
FROM
 (SELECT
 MAIL_ID,
 ROW_NUMBER() OVER (ORDER BY MAIL_DATE DESC) RN
 FROM
 CUSTAPP.T1
 WHERE
 USER_ID=6
 AND FOLDER_ID=1)
WHERE
 RN BETWEEN 900 AND 909) MI,
CUSTAPP.T1 M
WHERE
MI.MAIL_ID=M.MAIL_ID;
 
| Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | OMem | 1Mem | Used-Mem |
| 1 | NESTED LOOPS | | 1 | 11 | 10 |00:00:00.01 | 47 | | | |
|* 2 | VIEW | | 1 | 11 | 10 |00:00:00.01 | 7 | | | |
|* 3 | WINDOW NOSORT STOPKEY | | 1 | 8711 | 909 |00:00:00.01 | 7 | 267K| 267K| |
|* 4 | INDEX RANGE SCAN | T1_USER_FOLDER_MAIL | 1 | 8711 | 910 |00:00:00.01 | 7 | | | |
| 5 | TABLE ACCESS BY INDEX ROWID| T1 | 10 | 1 | 10 |00:00:00.01 | 40 | | | |
|* 6 | INDEX UNIQUE SCAN | SYS_C0023476 | 10 | 1 | 10 |00:00:00.01 | 30 | | | |
 
Predicate Information (identified by operation id):
 2 - filter(("RN">=900 AND "RN"<=909))
 3 - filter(ROW_NUMBER() OVER ( ORDER BY "T1"."SYS_NC00005$")<=909)
 4 - access("USER_ID"=6 AND "FOLDER_ID"=1)
 6 - access("MAIL_ID"="M"."MAIL_ID")The above made use of both indexes, did and completed in 0.01 seconds.
SELECT /*+ ORDERED */
MI.MAIL_ID,
TO_CHAR(M.MAIL_DATE,'DD MON YYYY HH:MI:SS AM') AS MAIL_DATE1,
M.MAIL_DATE AS MAIL_DATE,
M.FOLDER_ID,
M.MAIL_ID,
M.USER_ID
FROM
(SELECT /*+ FIRST_ROWS(10) */
 MAIL_ID
FROM
 (SELECT
 MAIL_ID,
 ROW_NUMBER() OVER (ORDER BY MAIL_DATE DESC) RN
 FROM
 CUSTAPP.T1
 WHERE
 USER_ID=6
 AND FOLDER_ID=1)
WHERE
 RN BETWEEN 8600 AND 8609) MI,
CUSTAPP.T1 M
WHERE
MI.MAIL_ID=M.MAIL_ID;
 
| Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | OMem | 1Mem | Used-Mem |
| 1 | NESTED LOOPS | | 1 | 11 | 10 |00:00:00.11 | 81 | | | |
|* 2 | VIEW | | 1 | 11 | 10 |00:00:00.11 | 41 | | | |
|* 3 | WINDOW NOSORT STOPKEY | | 1 | 8711 | 8609 |00:00:00.09 | 41 | 267K| 267K| |
|* 4 | INDEX RANGE SCAN | T1_USER_FOLDER_MAIL | 1 | 8711 | 8610 |00:00:00.05 | 41 | | | |
| 5 | TABLE ACCESS BY INDEX ROWID| T1 | 10 | 1 | 10 |00:00:00.01 | 40 | | | |
|* 6 | INDEX UNIQUE SCAN | SYS_C0023476 | 10 | 1 | 10 |00:00:00.01 | 30 | | | |
 
Predicate Information (identified by operation id):
 2 - filter(("RN">=8600 AND "RN"<=8609))
 3 - filter(ROW_NUMBER() OVER ( ORDER BY "T1"."SYS_NC00005$")<=8609)
 4 - access("USER_ID"=6 AND "FOLDER_ID"=1)
 6 - access("MAIL_ID"="M"."MAIL_ID")The above made use of both indexes, did and completed in 0.11 seconds.
As the above shows, it is possible to efficiently retrieve the desired records very rapidly without having to leave the cursor open.
If this SQL statement will be used in a web browser, it probably does not make sense to leave the cursor open. If the SQL statement will be used in an application that maintains state, and the user is expected to always page from the first row toward the last, then leaving the cursor open and reading rows as needed makes sense.
Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.

Table control small Issues , Plz help in tracing the problem

Hello John , Rich , Anand & all
My sorting is working fine but thr is small problem
1. user has habit of pressing enter after everything,
 after entering the values in editable fields in Table control , it doesnt retain the entered values but if he presses save button immediately after entering values , it saves .
how 2 hold the values after pressing enter button
2. Now with this code , it saves the table control content but doesnt display the latest values immediately on the screen .
3. User doesnt want to press SAVE button , he wants save the Table control content by pressing ENTER button,
What is the OK_CODE value for Enter Button plz ?
Plllllzzzzz help me for god sake ASAP.
Everyone whoever make an attempt is going to get 10 pnts.
==========================
FLOW Logic
PROCESS BEFORE OUTPUT.
MODULE SET_STATUS.
LOOP AT ITAB
WITH CONTROL TCL1
CURSOR TCL1-CURRENT_LINE .
MODULE SET_LINE_COUNT .
ENDLOOP.
PROCESS AFTER INPUT.
MODULE GET_OK_CODE .
MODULE EXIT_COMAND AT EXIT-COMMAND.
MODULE SCROLL_SORT.
LOOP AT ITAB.
MODULE UPDATE_MOD.
ENDLOOP.
==========================
REPORT ZSD_REP_ORDER_BANK_CHANGE NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES: VBAK,VBAP,VBRK,ZSD_TABL_ORDBANK,MARA,KONV.
CONTROLS: TCL1 TYPE TABLEVIEW USING SCREEN 0200.
DATA: ITAB LIKE ZSD_TABL_ORDBANK OCCURS 0 WITH HEADER LINE,
 WA_ITAB LIKE ZSD_TABL_ORDBANK,
 OK_CODE LIKE SY-UCOMM,
 SAVE_OK_CODE LIKE SY-UCOMM,
 UPD_OK_CODE LIKE SY-UCOMM,
 ANSWER TYPE C,
 I LIKE SY-LOOPC ,
 J LIKE SY-LOOPC,
 V_LINES LIKE SY-LOOPC,
 LINE_COUNT LIKE SY-LOOPC,
 STS TYPE N,
 EMGRP LIKE MARA-EXTWG,
 QTY LIKE ZSD_TABL_ORDBANK-QTY,
 UPRICE LIKE ZSD_TABL_ORDBANK-UPRICE,
 TOT LIKE ZSD_TABL_ORDBANK-TOT,
 INO LIKE VBAP-POSNR,
 COL TYPE CXTAB_COLUMN,
 COPIED_ONCE ,
 FLDNAME(100),HELP(100).
FIELD-SYMBOLS:
 <FS_ITAB> LIKE LINE OF ITAB,
 <FS_TCL1> LIKE LINE OF TCL1-COLS.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS: S_CCODE FOR ZSD_TABL_ORDBANK-CCODE
 NO INTERVALS NO-EXTENSION OBLIGATORY,
 S_SORG FOR ZSD_TABL_ORDBANK-SORG
 NO INTERVALS NO-EXTENSION OBLIGATORY,
 S_DCHAN FOR ZSD_TABL_ORDBANK-DISTCHAN,
 S_DIV FOR ZSD_TABL_ORDBANK-DIV,
 S_MATNO FOR ZSD_TABL_ORDBANK-MATNO,
 S_CUSTNO FOR ZSD_TABL_ORDBANK-CUSTNO ,
 S_QTNO FOR ZSD_TABL_ORDBANK-QTNO,
 S_QTDAT FOR ZSD_TABL_ORDBANK-QTDAT,
 S_QTVDAT FOR ZSD_TABL_ORDBANK-QTVALDAT,
 S_SONO FOR ZSD_TABL_ORDBANK-SONO.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN.
 SELECT * FROM ZSD_TABL_ORDBANK
 INTO TABLE ITAB
 WHERE CCODE IN S_CCODE
 AND SORG IN S_SORG
 AND DISTCHAN IN S_DCHAN
 AND DIV IN S_DIV
 AND MATNO IN S_MATNO
 AND CUSTNO IN S_CUSTNO
 AND QTNO IN S_QTNO
 AND QTDAT IN S_QTDAT
 AND QTVALDAT IN S_QTVDAT
 AND SONO IN S_SONO .
 IF SY-SUBRC EQ 0.
 REFRESH ITAB.
 CLEAR COPIED_ONCE.
 CALL SCREEN 0200.
 ELSE.
 MESSAGE E012(ZQOTBANK) .
 ENDIF.
*& Module SET_STATUS OUTPUT
 text
MODULE SET_STATUS OUTPUT.
SET PF-STATUS '0200'.
SET TITLEBAR '0200'.
 IF COPIED_ONCE IS INITIAL.
 SELECT * FROM ZSD_TABL_ORDBANK
 INTO TABLE ITAB
 WHERE CCODE IN S_CCODE
 AND SORG IN S_SORG
 AND DISTCHAN IN S_DCHAN
 AND DIV IN S_DIV
 AND MATNO IN S_MATNO
 AND CUSTNO IN S_CUSTNO
 AND QTNO IN S_QTNO
 AND QTDAT IN S_QTDAT
 AND QTVALDAT IN S_QTVDAT
 AND SONO IN S_SONO .
 IF SY-SUBRC EQ 0.
 DESCRIBE TABLE ITAB LINES V_LINES.
 TCL1-LINES = V_LINES.
 ENDIF.
 COPIED_ONCE = 'X'.
 REFRESH CONTROL 'TCL1' FROM SCREEN '0200'.
 ENDIF.
 LOOP AT ITAB.
 QTY = ITAB-QTY.
 UPRICE = ITAB-UPRICE.
 TOT = QTY * UPRICE .
 ITAB-TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-CGL_QTY.
 UPRICE = ITAB-CGL_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-CGL_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-BHEL_QTY.
 UPRICE = ITAB-BHEL_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-BHEL_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-ALSTOM_QTY.
 UPRICE = ITAB-ALSTOM_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-ALSTOM_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-SIEMENS_QTY.
 UPRICE = ITAB-SIEMENS_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-SIEMENS_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-TELK_QTY.
 UPRICE = ITAB-TELK_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-TELK_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-OTH_QTY.
 UPRICE = ITAB-OTH_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-OTH_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 MODIFY ITAB.
 ENDLOOP.
ENDMODULE. " SET_STATUS OUTPUT
*& Module SET_LINE_COUNT INPUT
 text
MODULE SET_LINE_COUNT OUTPUT.
LINE_COUNT = SY-LOOPC.
ENDMODULE. " SET_LINE_COUNT INPUT
*& Module GET_OK_CODE INPUT
 text
MODULE GET_OK_CODE INPUT.
IF OK_CODE = 'SAVE'.
 UPD_OK_CODE = OK_CODE.
ENDIF.
ENDMODULE. " GET_OK_CODE INPUT
*& Module EXIT_COMAND INPUT
 text
MODULE EXIT_COMAND INPUT.
SAVE_OK_CODE = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK_CODE.
 WHEN 'BACK'.
 CALL FUNCTION 'POPUP_TO_CONFIRM'
 EXPORTING
 TITLEBAR = 'Order Bank Entry'
 TEXT_QUESTION = 'Do you want to Go BacK ?'
 TEXT_BUTTON_1 = 'Yes'
 TEXT_BUTTON_2 = 'No'
 DEFAULT_BUTTON = '2'
 IMPORTING
 ANSWER = ANSWER.
 IF ANSWER = '1'.
 LEAVE TO SCREEN 0.
 ELSE.
 ENDIF.
 WHEN '%EX'.
 CALL FUNCTION 'POPUP_TO_CONFIRM'
 EXPORTING
 TITLEBAR = 'Order Bank Entry'
 TEXT_QUESTION = 'Do you want to Exit ?'
 TEXT_BUTTON_1 = 'Yes'
 TEXT_BUTTON_2 = 'No'
 DEFAULT_BUTTON = '2'
 IMPORTING
 ANSWER = ANSWER.
 IF ANSWER = '1'.
 LEAVE TO SCREEN 0.
 ELSE.
 ENDIF.
ENDCASE.
ENDMODULE. " EXIT_COMAND INPUT
*& Module SCROLL INPUT
 text
MODULE SCROLL_SORT INPUT.
SAVE_OK_CODE = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK_CODE.
WHEN 'P--'.
 TCL1-TOP_LINE = 1.
WHEN 'P-'.
 TCL1-TOP_LINE = TCL1-TOP_LINE - LINE_COUNT.
 IF TCL1-TOP_LINE LE 0.
 TCL1-TOP_LINE = 1.
 ENDIF.
WHEN 'P+'.
 I = TCL1-TOP_LINE + LINE_COUNT.
 J = TCL1-LINES - LINE_COUNT + 1.
 IF J LE 0.
 J = 1.
 ENDIF.
 IF I LE J.
 TCL1-TOP_LINE = I.
 ELSE.
 TCL1-TOP_LINE = J.
 ENDIF.
WHEN 'P++'.
 TCL1-TOP_LINE = TCL1-LINES - LINE_COUNT + 1.
 IF TCL1-TOP_LINE LE 0.
 TCL1-TOP_LINE = 1.
 ENDIF.
WHEN 'SORTUP'.
 READ TABLE TCL1-COLS ASSIGNING <FS_TCL1> WITH KEY SELECTED = 'X'.
 IF SY-SUBRC = 0.
 SPLIT <FS_TCL1>-SCREEN-NAME AT '-' INTO HELP FLDNAME.
 SORT ITAB ASCENDING BY (FLDNAME).
 ENDIF.
WHEN 'SORTDN'.
 READ TABLE TCL1-COLS ASSIGNING <FS_TCL1> WITH KEY SELECTED = 'X'.
 IF SY-SUBRC = 0.
 SPLIT <FS_TCL1>-SCREEN-NAME AT '-' INTO HELP FLDNAME.
 SORT ITAB DESCENDING BY (FLDNAME).
 ENDIF.
ENDCASE.
ENDMODULE. " USER_COMMAND INPUT
*& Module UPDATE_MOD INPUT
 text
MODULE UPDATE_MOD INPUT.
CASE UPD_OK_CODE.
WHEN 'SAVE'.
 UPDATE ZSD_TABL_ORDBANK FROM ITAB .
 STS = SY-SUBRC .
 IF STS NE 0.
 MESSAGE E003(ZQOTBANK) .
 ENDIF.
ENDCASE.
ENDMODULE. " UPDATE_MOD INPUT
Thnx
Moni
Message was edited by: md monirujjaman

PROCESS BEFORE OUTPUT.
MODULE SET_STATUS.
LOOP AT ITAB
 WITH CONTROL TCL1
 CURSOR TCL1-CURRENT_LINE .
 MODULE SET_LINE_COUNT .
ENDLOOP.
PROCESS AFTER INPUT.
MODULE GET_OK_CODE .
MODULE EXIT_COMAND AT EXIT-COMMAND.
MODULE SCROLL_SORT.
LOOP AT ITAB.
 MODULE UPDATE_ITAB.
ENDLOOP.
 MODULE UPDATE_TABLE.
changed modules are ......
*& Module UPDATE_MOD INPUT
 text
MODULE UPDATE_ITAB INPUT.
 MODIFY TABLE ITAB FROM ITAB.
ENDMODULE. " UPDATE_MOD INPUT
*& Module TABL_UPD INPUT
 text
MODULE UPDATE_TABLE INPUT.
 CASE UPD_OK_CODE.
 WHEN 'SAVE'.
 UPDATE ZSD_TABL_ORDBANK FROM TABLE ITAB .
 IF SY-SUBRC NE 0.
 MESSAGE E003(ZQOTBANK) .
 ENDIF.
 ENDCASE.
ENDMODULE. " TABL_UPD INPUT
now i m able 2 get the latest edited values from user immediately i press enter button and getting saved by pressing SAVE button but further problems are, i have one dropdown button for status 1 field , and 1 date field are not getting updated .
So further help plz.

Data Source Issue - Plz help

Hi all,
We are using a cluster environment for our E2E testing. We hav OSB Server and SOA Server. But the data source named mds-owsm, soaLocalXt datasource keeps on suspending on and off showing unpredictable behaviour. Because of this our server gets shut down automatically which was badly affecting our testing. Kindly help us resolving this issue.
When we track our osb managed server log, we see the following error:
[2011-04-10T21:24:08.159-05:00] [osb_server1] [NOTIFICATION] [] [oracle.mds] [tid: MDSPollingThread-[owsm, jdbc/mds/owsm]] [userId: <anonymous>] [ecid: 0000Iwxj3gJ6QPD5nBL6iZ1DcJMm00000A,1:18925] [APP: wsm-pm] [[
oracle.mds.exception.MDSRuntimeException: weblogic.common.resourcepool.ResourceDisabledException: Pool mds-owsm is Suspended, cannot allocate resources to applications..
 at oracle.mds.internal.persistence.db.BaseReposAccess.<init>(BaseReposAccess.java:360)
 at oracle.mds.internal.persistence.db.shredded.ShreddedReposAccess.<init>(ShreddedReposAccess.java:274)
 at oracle.mds.internal.persistence.db.shredded.ShreddedDBMSConnection.createReposAccess(ShreddedDBMSConnection.java:444)
 at oracle.mds.internal.persistence.db.BaseDBMSConnection.getOrCreateReposAccess(BaseDBMSConnection.java:2072)
 at oracle.mds.internal.persistence.db.BaseDBMSConnection.queryStoreForLatestCommitNumber(BaseDBMSConnection.java:2503)
 at oracle.mds.internal.persistence.db.DBDocumentChangeProvider.queryStoreForLatestCommitNumber(DBDocumentChangeProvider.java:330)
 at oracle.mds.internal.persistence.db.DBDocumentChangeProvider.getChanges(DBDocumentChangeProvider.java:81)
 at oracle.mds.persistence.stores.db.DBMetadataStoreCommunicator.signalChanges(DBMetadataStoreCommunicator.java:134)
 at oracle.mds.internal.persistence.db.ChangePollingThread.run(ChangePollingThread.java:81)
Caused by: oracle.mds.internal.persistence.db.fcf.MDSDBIOException: weblogic.common.resourcepool.ResourceDisabledException: Pool mds-owsm is Suspended, cannot allocate resources to applications..
 at oracle.mds.internal.persistence.db.JNDIConnectionManagerImpl.fetchConnection(JNDIConnectionManagerImpl.java:96)
 at oracle.mds.internal.persistence.db.ConnectionManager.getConnection(ConnectionManager.java:347)
 at oracle.mds.internal.persistence.db.BaseReposAccess.<init>(BaseReposAccess.java:347)
 ... 8 more
Caused by: weblogic.jdbc.extensions.PoolDisabledSQLException: weblogic.common.resourcepool.ResourceDisabledException: Pool mds-owsm is Suspended, cannot allocate resources to applications..
 at weblogic.jdbc.common.internal.JDBCUtil.wrapAndThrowResourceException(JDBCUtil.java:251)
 at weblogic.jdbc.common.internal.RmiDataSource.getPoolConnection(RmiDataSource.java:344)
 at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:360)
 at oracle.mds.internal.persistence.db.JNDIConnectionManagerImpl.fetchConnection(JNDIConnectionManagerImpl.java:91)
 ... 10 more
Thanks & Regards
Prabhu

Because of this our server gets shut down automatically No. Just because connection pool got suspended, server should not go down. There is any other issue which you did not notice. For Data Source to function properly, make sure that intial and maximum connections limit has been set appropriately (preferably both should be equal) and make sure that database is up and running always and has that many connections open. Check with the DBA for DB connection limit settings.
Raise a SR with support if you are not able to figure out the exact issue.
Regards,
Anuj

New MBP Wi-Fi Issue. Plz Help

Similar Messages

Maybe you are looking for