New Member but with a question about my Predator and erecovery disks

So far I have tried several routes to recover my Predator AG-3620 desktop and so far it's been a "fail"each time. Originally tried to go with the recovery from the USB (will not accept USB for some odd reason),then decided, okay, let's get the erecovery disks from Acer (system specific) and they arrive scratched. Nogo there,...Acer sends a second good set and I go about the recovery steps and get a "Install incomplete. Windowsfailed to fully,..." Sooo, figure okay MAYBE, just maybe, it's the HDD,...go get a NEW HDD, and attempt anotherrun of restore,...again, no go. By this time I am really flustered,...(I've done recoveries on other systems, noproblem) SO I come up on Acer community in the Predator (Gamers) area and get a few good Ideas,...but nonehelp as I still have a dead (in my mind, you can't use it, it's dead) desktop that is a FANTASTIC system,...butnow I am having to resort to using the wife's laptop to look for ANY way I can get my system back up andrunning. I have checked cables, memory, and even gone the Ubutu route and Microsoft sys software down loadjust to get to Windows so I can get that puppy up and going again. ANY help is appreciated at this point and I mean ANY!!! Please save me from this Compac Celeron Laptop I amhaving to deal with in the meantime!!!

Hiya!
It would only use data when either you initiate the data (either connecting to the browser or other apps, or manually poll your email) or when your device pulls the email.
Now there are many variables to how much data is used, but in my travels of the interwebs, I have come across This data calculator which should help a bit. I'm with Rogers and don't use that carrier, but the tool works nonetheless.
Hope that helps
1). Please thank those who help you by clicking the beside the 'Reply' button.
2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
3). Remember to have fun! We are all in this together!
4). Follow me on

Similar Messages

Potential new T61 user with some questions about product/support/etc.

Hi all!
I've been using Dell Latitude's for last 7+ years and been happy with them thus far, as I was able to stay within the C-series thru 3 systems and reuse some components such as batteries, CD-ROM, etc. but now that I'd have to go to D-series, that gives me the choice of going to new vendor...and IBM/Lenovo was the only other choice due to my OS requirement: XP Pro!
So now I'm here asking some questions that I'm still having issues with:
(I'm comparing the T61 to Dell D530 and/or my C610)
1) Features that I've used on existing Dell that I don't see on T61 :
    a) Infared port --- I've used to transfer stuff from one sys to another
    b) S-Video out --- I've used to display on TV for some situations
    c) Serial port --- can't recall using it but with my luck, I'd need it sometime.
    d) Parallel port (C610) --- for my really old printer used on rare occasions
    e) Floppy drive --- yes, I still use it for some unusual situations
2) On Dell, I can put a 2nd battery or floppy drive in the media bay instead of CD/DVD...what about T61?
3) Support:
    a) Dell forums have 7+ yrs of history and are well used...this forum seems brand new...was there another one before it?
    b) My Dell's have lifetime tech support (ok, so sometimes understanding the folks from India can be an issue) but IBM seems to limit this to life of warranty.
4) Pricing: T61 would be seem to be, at minimum, about $150 more than similar Dell even with current "sales"...I'm having trouble justifying this...
5) Things that I see that T61 has that new Dell D530 doesn't:
   a) built-in mike --- my current Dell has it and I use it now and then so this is a plus!
   b) keyboard light --- nice feature, but couldn't I use a USB one instead if I really needed it?
   c) fingerprint reader --- never used one...how often do people use it?
   d) 2nd card slot for Express cards --- current Dell has two standard slots and I'm using both, though one is wi-fi which C610 didn't have built-in...and other is modem to replace failed built-in...D530 has only one slot, so having 2nd of any type is good.
   e) middle mouse button --- is that what I'm seeing? Or is it something else?
   f) recovery partition --- ok, nice but how much room does it take?
6) Things that D530 has that T61 doesn't:
   a) 4th USB --- I'm used to only 1 now so even 3 would be big step up...
   b) 15" standard screen --- T61 is only a 14.1" screen and that extra bit of size would likely help, but I'm limited on physical dimensions to 13.5" total width (unusual situation) so a 15.4" wide screen isn't possible...I'm looking at SXGA+ in either case to maximize usage.
   c) recovery CD is standard --- so I'm presuming I'd have to create my own here?
That, I think, about does it...so...any users willing to help me decide if a switch is good for me?
Thanks!!!
Update: It seems that phone tech support is only available for warranty period with IBM, whereas with Dell, I can still call for hardware tech help (to diagnose problem at least) for "lifetime" or well past paid period, as I've already done in past...comments?
Update #2: Changed the incorrect "R"s to "T"! Duh!
Message Edited by J_Hallgren on 12-28-2007 07:50 PM
A current Dell Latitute user who was looking to maybe switch...But didn't.

I finally made the switch to Lenovo and the Thinkpad line of notebooks and think this was the best move I have ever made in years! I've spent far too much money maintaining a separate notebook (Dell Latitude L400) several custom built desktops. This December, I sold my desktops, my laptops (I had 2 L400's), and my 20" Aquous LCD TV to finance my Thinkpad T61. It was well worth it! I will try to answer your questions in this checklist, which I found to be quite similar to my own .... frighteningly exactly like my own....:
Hardware Requirements
IR: This is pretty outdated but functional. I used to use a Palm with IR as well as an IR laser printer. I ditched both for a PDA phone with bluetooth. The laser printer is networked now
S-Video: You might be able to get away with a TV tuner cardbus or a expres card. There might also be external converters that convert from your VGA/DVI (DVI via port replicator) into any variety of video outputs.
Serial: My older Palm had a serial port for the docking station - bluetooth is a good replacement
Parallel port: I currently have a USB to parallel adapter in my bag just in case. These are cheap cables and work well.
Floppy: I keep a USB one of these just in case. I find that having fewer input devices on my laptop and leaving them external help keep the machine lighter for my mostly mobile usage (e.g., my L400 with no inputs at all except 1 USB port).
T61 Spare Battery: Uses ultrabay battery - I rarely use the DVDRW drive and leave the ultrabay battery in there while on the go. DVDRW drive stays in the bag until needed. I recommend you upgrade to the 9 cell battery with the advanced ultra bay battery, which will give u something like 9 to 12 hours of operating life. If you are not a fan of the battery pack sticking out like crazy, stick to the letter box format laptop (not widescreen), which will provide the minimum amount of battery pack stick-out with the 9 cell battery. The 6 cell will not stick out with the letterbox laptop but will stick out with the widescreen version.
Support Options: I rarely call support so I have no opinion here.
Pricing: Price was not really a concern for me. I purchased mine for the business look mainly, which Lenovo maintained well. I don't like the shiny/plastic/toy look of Dell and Apple computers these days. If anything, consider the premium an investment in the build quality of these machines (or a premium just for the good looks). I particularly like the roll cage as well as active protection system that stops the hard drive as soon as the system detects excessive motion.
Included Hardware Comparison:
I like the mic, use it often for Skype and the built in 1.3MP webcam as well.
Keyboard light.... kinda cute but not as functional because it simply is too small. It was a cute idea that could have been made better had Lenovo opted for a backlit keyboard instead. That would have been more functional and added to the "cool" factor.
With regards to the Express Card and PCMCIA card slot, I rarely use either because everything is built in. However, if you want that TV tuner, an express card or PCMCIA card slot is good. If you opt for the built in media reader, you will be unable to use the express card as the media reader takes up that slot (I might be wrong, but I think the card reader is large enough that it takes up both slots, so u can't add anything anyway - but you should call pre-sales to answer that question).
Middle mouse button: The three buttons in the middle are used for the trackpoint/joystick mouse controller. I think the middle button is configurable to do various things. I personally hate the joystick and can only use the touchpad. The lack of a touchpad was the only reason I did not stick to the smaller 12.1" X line of laptops, which was really more in tune with my size requirements (too used to using the L400 sized machine).
Recovery Partition: This is a cheap way for manufacturers to make it easy for people to recover their systems in case of crash - without the need for any documentation or disc media. However, it makes it hard for people like me who only use machines after a clean format and customized install of Windows. This partition is about 10GB and can be erased with special disk format or partition tools. Windows itself cannot read or delete this partition. With the minimum size of the hard drives available, this should not be an excessive space killer for most people. I personally need only 7GB total for OS and apps. The remaining data I work with is actually streamed from a 500GB gigabit NAS. I might switch to a 32GB solid state disk one of these days when their performance comes more in par or exceeds traditional drives.
Recovery CD: You can create your own from the recovery partition since Lenovo does not provide any.
4th USB: I only use 1 or 2 as well. 1 for an external micro mouse (I love my touchpad, but it's just hard to use with Photoshop or CAD apps) and a second for a USB memory key. My other devices i.e., scanner, external mouse, keyboard, are plugged in on my desktop through a USB hub that goes to a single port on my docking station. So yes, your docking station will probably remove the need for more than 2 ports. Although, I do find it odd there are only 3 ports... such an odd number.
Screen Size: I personally wish I could have gotten the X series of laptops but the 14.1 was the only other mobile solution. For the larger screen size, docking station to my 24" Dell 2405FP. The compact nature of the T series makes it pretty thin and compact though... it was not too much bigger than my L400 - at least, not uncomfortably bigger.
But yeah, I think if you make the switch, you'll be getting yourself a solid machine that will keep u going for years. The Latitude line of Dell's were really good, but overall, I feel that the nature of Dell's manufacturing process is making it too "cookie cutter" and reducing its overall quality level. Their earlier lines were awesome, like the D lines you mentioned. But unless you get the ATG line, you just won't get the same level of quality they used to offer (in addition, the ATG line is wickedly too expensive - I'd rather get a Durabook for military grade spec at a fraction of the price).
Anyway, have fun shopping! :-)
And moderators or employees of Lenovo, don't you guys get referral bonuses for giving your employee discount code to friends and family? *wink*
T61_Wide | Model No. 7662 - CTO
Core 2 Duo T7250 | 2GB OCZ DDR2-800
82566MM Gigabit | 4965AGN Centrino Pro

New MBP owner with a question about OS disks.

Just got a new mac book pro, I didn't get the OS disks in the box with the computer. Did I get short changed? A lot of the what I've read, there seems to be a need to use the OS disks, specially when partitioning the drive.
Is it normal for the Macs to come without OS disks in the package or am I missing them?
Thanks

Just got a new MacBook Pro. I didn't get the OS disks in the box with the computer. Did I get short changed?
Yes. Where did you buy it?
A lot of the what I've read, there seems to be a need to use the OS disks, specially when partitioning the drive.
Correct.
Is it normal for the Macs to come without OS disks in the package
No.
or am I missing them?
Yes.

Guys i have a problem, I used to download apps from one of my friends apple id, now i created my new account, but when i was about to update my apps its asks for my friends id and password. now how could i update my old apps from my new apple id?

Guys i have a problem, I used to download apps from one of my friends apple id, now i created my new account, but when i was about to update my apps its asks for my friends id and password. now how could i update my old apps from my new apple id?

The_Tonmoy wrote:
I have no communication with my that friend :/ So it means i need to delete those apps? There's no other solution to update those apps?
No. purchases are forever tied to the apple ID used to buy them. Delete them and buy your own copies.

HT4972 Good afternoon! I addressed in the AT&T company with a question about untying of a sim card of AT&T from my iPhone, all of them made Iphone now is unlocked, I executed all points which were written: To complete the unlock, simply 1 . Open iTunes o

Good afternoon! I addressed in the AT&T company with a question about untying of a sim card of AT&T from my iPhone, all of them made Iphone now is unlocked, I executed all points which were written:
To complete the unlock, simply
1 . Open iTunes on your Mac or PC and verify that you have Internet connectivity.
2 . Ensure a SIM card is inserted into your iPhone.
3 . Connect your iPhone using the dock connector to USB cable that came with your iPhone.
4 . Backup and restore your iPhone using iTunes. For information on backup and restore, please visit http://support.apple.com/kb/HT1414.
5 . After restoring, your iPhone will be unlocked.
Additional information on unlocking can be found at http://support.apple.com/kb/TS3198
I made everything as well as was written, but on completion of the ios 6.1.3 installation the iPhone asks to be activated through wifi or through a wire to the computer.
I connected Iphone to the computer and the text takes off: (Were sorry, we are unable to continue with your activation at this time. Please TR again later, or contact customer care! )
how to me to activate my iPhone?
I hope for your help....

Hey APPLELovestory,
We have an article that goes over troubleshooting iPhone activation issues here:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Perform the following steps:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
Hope that helps,
David

I got an answer and I replied with a question about the answer, does no show in unanswered

I got an answer and I replied with a question about the answer, does no show in unanswered questions. I guess replying was not the way to get another anwer, How do I do that?
He said - Certain Firefox problems can be solved by performing a Clean reinstall. This means you remove Firefox program files and then reinstall Firefox.
I want to know - Will I still have my bookmarks, history, addons, plugins, etc.? I do not know what plugins and such that I had. What about my pinned tabs and my tabs that where open.
More information - When I try to start Firefox I keep getting the message that I need to restart my computer in order to complete a previous update attempt. I had Sweetpacks on my PC and I do not know where it came from, it took over my home page in Internet Explorer and Ithink caused the issue with Firefox.
Should I do the clean install or try starting Firefox now.

Could you please stay in the thread where you posted the question and reply there instead of opening a new thread?
Locking this thread, so please continue here:
*[[/questions/968194]]
See also:
*[[/questions/968222]]
You won't lose bookmarks and other data in the Firefox profile folder as long as you do not remove personal data in case you uninstall Firefox.
See also:
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/kb/Backing+up+your+information
You can open the Properties of the Firefox desktop shortcut via the right-click context menu and check the "Compatibility" tab.<br />
Make sure that all items are deselected in the "Compatibility" tab of the Properties window.

I have been trying to get the full version of lightroom after using a trial version but it says something about "GB" ? And i need to log into different account or set up a new one? Please help?

I have been trying to get the full version of lightroom after using a trial version but it says something about "GB" ? And i need to log into different account or set up a new one? Please help?

I would love to give you more information but i cannot access that page again? i can add Lightroom to my cart but when i go into my cart it says there is nothing in there? I have a red bubble above "my cart" with a number 4 in it to show there is something there but there is not? It just wont let me buy anything?

My friend gave me ipod touch with all his accounts, i created new accounts but when i went on the appstore and tried to update apps installed by him,i was asked his account's password! i dont know his password.how can i use my account to update apps?

my friend gave me ipod touch with all his accounts, i created new accounts but when i went on the appstore and tried to update apps installed by him,i was asked his account's password! i dont know his password.how can i use my account to update apps?

You can't. Apps and really all content purchased/downloaded through one Apple ID is forever tied to that Apple ID. In the case of Apps they will always request that Apple ID to update as they are licensed to that Apple ID.
In reality, the Apps were licensed to that Apple ID by the developer. And cannot simply be given away to you for you to use.
He should have wiped the iPod clean so you could set it up for your use without any of his accounts or purchased content as you are not really licensed to any of those Apps.
Your friend should have followed this support document before giving the iPod to you:
What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support

Please , help me for apple id....... i made new id but there is a credite card option and that's why i am not able to download any free application for iphone,.....so,.....what i do about this problem..???

please , help me for apple id....... i made new id but there is a credite card option and that's why i am not able to download any free application for iphone,.....so,.....what i do about this problem..???

You can create an Apple ID without a credit card by following this guide exactly: http://support.apple.com/kb/ht2534. Note that you have to start by downloading a free app, then create the ID.

HT2534 Its is fake . i have bought iphone today but i haven't cred card so how i create account ? Your example type "none" window not come . New iphone but with out ID useless Phone :(

Its is fake . i have bought iphone today but i haven't cred card so how i create account ? Your example type "none" window not come . New iphone but with out ID useless Phone

Most of the people on these forums, including myself, are fellow users - you're not talking to iTunes Support here.
Did you follow the instructions on that page exactly when creating the account (the instructions won't work with existing accounts) ? e.g. if doing it on your phone and you are currently logged into an account then log out of it, find a free app in the app store app, tap on its free price button, tap 'install app', and then tap on 'create new apple id' on the popup that you get. I tried those instructions on my phone a few days ago in response to another thread and I got the 'none' option on the payments screen.

A question about item "type and release" of source system creation

Hello expert,
I have a question about item "type and release" of source system creation.
As we know,when we create a web servie source system,there will display a pop-up which includes three items as "logical system","source system"and "type and release".
About the item "type and release",when we push "F4" button,there will be three default selections as below:
"ORA 115     Oracle Applications 11i
TLF 205     Tealeaf 2.05B
XPD 020     SAP xPD".
Who can tell me when and how should I use the three selections.
And also I attempted to input the item by some optional letters except the default three selections and it seems that I can input it freely.
Thank you and Best Regards,
Maggie

Hello DMK,
Thank you very much for your answer.It is very helpful for me.
Can I ask you further about it?
I got that it is a semantic description item.
You said the default selections are set by our basis people.Would you like to tell me how should we creat a new value except the default ones for item "type and release"?Only by inputing the value in the item directly?But you see we canot see the new value item we created by ourself when we push "F4" button next time ,is that ok?Or do we have to ask basis people to define one new value item just like the default seletions before we use it.
Also if possible would you like to describe detail about "This becomes important when you are troubleshooting certain issues especially when RFC connection problems."
Thank you and Best Regards,
Maggie
Message was edited by: Maggie

A few questions about the ka790gx and dka790gx

i have a few questions about the ka790gx and dka790gx , how much better is the dka790gx compaired to the ka790gx ? . how much difference does the ACC function make to overclocking etc , i plan on getting a phenom II 940BE or 720BE . i already have the ka790gx so would it be worth building another system using the dka790gx mobo , or should i keep what i already have and just change the cpu ?

It's largely irrelevant what other boards had VRM issues other than the KA790GX - the fact is it died at stock settings. Since there is little cost difference between the more robust DKA790GX (or Platinum if you really need 1394) why bother with the proven weakling? There are other examples around of the KA not having a robust power section. There's no way I would use even a 95W TDP CPU in the KA and absolutely not O/C.....!
As for the credentials of Custom PC, I have generally found their reviews accurate and balanced, and echo my own findings where applicable. If a little too infrequent.
The fact that the KA has such a huge VRM heatsink leads me to my other comments on the Forum, particularly regarding the "fudge" aspect:
"""Henry is spot on - the notion that adding a heatsink to the top of the D2PAK or whatever MOSFETS is effective is virtually worthless. The device's die thermal junction is the tab on the device back - which is always against the PCB pad. The majority of heat is therefore dissipated in to the board, and the fact that the epoxy plastic encapsulation gets hot is simply due to the inability of the heat to be conducted away from the device die via the tab. Not sure when Epoxy become an effective conductor of heat.... Good practice is to increase the size of the PCB pad (or "land" in American) such that the enlarged PCB copper area acts as an adequate heatsink. This is still not as effective as clamping a power device tab to an actual piece of ali or copper, but since the devices used are SMD devices, this is not possible. However, the surface area required to provide sufficient PCB copper area to act as a heatsink for several devices isn't available in the current motherboard layouts. Where industrial SBC designs differ in this respect is to place the VRM MOSFETs on the back of the PCB on very enlarged PCB pads - where real estate for components is not an issue.
Gigabyte's UD3 2oz copper mainboards sound like a good idea, on the face of it. However, without knowing how they have connected the device tabs to where and what remains a mystery. I suspect it is more hype than solution, although there will be some positive effect. From an electrical perspective, having lower resistance connecting whatever to whatever (probably just a 0V plane) is no bad thing.
The way the likes of ASUS sort of get round the problem is to increase the sheer number of MOSFET devices and effectively spread the heat dissipation over a larger physical area. This works to a degree, there is the same amount of heat being dissipated, but over several more square inches. The other advantage of this is that each leg of the VRM circuit passes less current and therefore localised heat is reduced. Remember that as well as absolute peak operating temperature causing reduced component life, thermal cycling stresses the mechanical aspects of components (die wire bonds for example) as well as the solder joints on the board. Keeping components at a relatively constant temperature, even if this is high (but within operating temperature limits), is a means of promoting longevity.
For myself, the first thing I do with a seperate VRM heatsink is take it off and use a quiet fan to blow air on to the VRM area of the PCB - this is where the heat is. This has the added benefit of actively cooling the inductors and capacitors too....
Cooling the epoxy component body is a fudge. If the epoxy (and thus any heatsink plonked on top of it) is running at 60C, the component die is way above that.....
It's better than nothing, but only just."""

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

Hello there, there is a rare window that keeps popping up every time i start Logic. I'd like to send a screenshot... anyway, it's a "tempo" window with strange layout about midi effects and so,.... is it normal? How can i improve this? Thanks.

hello there, there is a rare window that keeps popping up every time i start Logic. It's a "tempo" window with strange layout about midi effects and so,.... is it normal? How can i improve this? Thanks.

Hmm, that's some sort of MIDI Arpeggiator setup in your environment. Strange that you don't know it, this has to be custom-installed, it is not part of the standard setup.
You can do two things about it:
1.unlock your current screenset (shift-L), then close the (Bass Driver) window, then relock the screenset (shift-L). Next time you open up this project you won't see the Bass Driver, but it is still in the project.
2. You can remove the whole page: open the Environment (cmd-8), then go to the dropdown menu arrow top left of the Environment window and select the Bass Driver layer. If it is selected, dropdown again and choose Delete. Now Save your project under a different name (Save As...), so that you still keep the Bass Driver setup in the original project. If you don't need to keep it, you can simply Save.

Question About Color's and Gradients

Hi all,
I have a question about color swatches and gradients.
I am curious to know, if I have 2 color swatches that I make into a gradient color, is it posible to change the tint of each indivdual color in that gradient and have that applied to the gradient without having to adjust the gradients opacity.
The reason that I'm asking this is because in creating a project I found that the colors that I chose for to make my gradient from my swatches were to dark, and while I can adjust each one's tint to my liking (if the object they were applied to was going to be a solid color) but that doesn't seem to apply to the overall gradient.
I hope that makes sense, I know that this was something that was able to be accomplished in quark and was wondering if I can do something similar.

If you double click your gradient swatch (after adding it to the swatches)
Then click a colour stop in the gradient, and then change the drop down menu to CMYK (or rgb)
And you can alter the percentages there. It's not much use for spot colours but it's a start.
But making tint swatches would be a good start anyway.
At least then when you double click the gradient (in the swatches) to edit it you can choose from CMYK, RGB, LAB, or Swatches and adjust each colour stop to your liking.

New Member but with a question about my Predator and erecovery disks

Similar Messages

Maybe you are looking for