New Memory Recognition Problem - MS-6704 V2.1 845PE Max3-FISR motherboard
I have just purchased a 1GB DDR (PC3200) memory module from Crucial after using their downloaded software to examine my system and recommend compatible upgrades.
Before this I had 512MB DDR (PC3200) - also from Crucial - in slot 1, 256MB DDR (PC2700) - original - in slot 2 and 256MB DDR (PC2700) - original - in slot 3, 1 GB in total and all working fine.
I removed the 256MB module in slot 2 and replaced it with the 512MB module from slot 1. I then put the new 1GB module in slot 1.
The system is now only recognising the new 1GB module in slot 1 and neither of the other two modules, so I still effectively only have 1GB of memory.
I've used system info software which recognises and provides details of each of the modules in the new arrangement on the motherboard and memory testing software supposedly across all three modules which returned 100% success.
The Crucial self testing software indicated that 2GB memory was the maximum permissible with my motherboard and recommended removing all of my original modules and replacing them with just two 2GB modules.
Is it possible that my system will only recognise modules of 1GB capacity in pairs?
Your help/advice would be most appreciated.
Hello NovJoe and thanks for the reply.
I do have only 3 slots, so presumably I should simply try your suggested arrangement with just the 3 slot positions:
Slot 1: 1GB
Slot 2: 256MB
Slot 3: 512MB
I had always planned to achieve only 1.75GB, rather than splash out on two 1GBs.
Is this simply randomly placing the RAMs to see if they will work together or is there some logic to this? Is the mixing concern related to capacities or PC**** ratings or something else? I had a similar mix of either before buying this new RAM and they worked fine together, although admittedly there wasn't the range of capacities I'm now trying.
There seems to be 6 position combinations; is there any point in trying all of these before getting Crucial involved again? I always understood that one should start with the largest capacity RAM in slot 1 and progressively move along the slots with reducing capacities.
Nobody tells you that RAMs should be very similar in, for example, capacities or indeed placed in certain configurations before they will work together. What is the technical reason for this restriction on RAM module use?
Similar Messages
-
I bought 2 new memory card to 4 grams each - replace them in your MacBook Pro 13-inch but it will not turn on - If you are installing a card for 2 and one for 4 d all works - tell me what could be the problem
I assume that you have installed new RAM in your MBP.
It would be helpful if you indicated the EXACT model/year MBP that you have.
What the the RAM specifications that you are trying to install?
Ciao. -
Problem description:
I have ordered a new iMac but my current one seems to be running really slowly. I believe it to be a memory related problem but can’t seem to identify what is causing it. Your help is greatly appreciated.
EtreCheck version: 2.1.8 (121)
Report generated March 7, 2015 at 4:01:26 PM PST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (24-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 2.8 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR2 SDRAM 800 MHz ok
BANK 1/DIMM1
1 GB DDR2 SDRAM 800 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.10 (14A389) - Time since boot: 23 days 18:5:35
Disk Information: ℹ️
ST3320820AS_Q disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 319.21 GB (195.05 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
HP Officejet 6000 E609n
Apple, Inc. Keyboard Hub
Primax Electronics Apple Optical USB Mouse
Apple, Inc Apple Keyboard
Apple Inc. Built-in iSight
Western Digital External HDD 500.11 GB
My Passport (disk1s1) /Volumes/My Passport : 500.11 GB (200.60 GB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Popcorn 4/Popcorn.app
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
/System/Library/Extensions
[not loaded] com.aliph.driver.jstub (1.1.2 - SDK 10.7) [Click for support]
Problem System Launch Agents: ℹ️
[killed] com.apple.accountsd.plist
[killed] com.apple.AirPlayUIAgent.plist
[killed] com.apple.bird.plist
[killed] com.apple.CalendarAgent.plist
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.cloudd.plist
[killed] com.apple.cmfsyncagent.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.coreservices.uiagent.plist
[killed] com.apple.EscrowSecurityAlert.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.pluginkit.pkd.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.rcd.plist
[killed] com.apple.recentsd.plist
[killed] com.apple.sbd.plist
[killed] com.apple.scopedbookmarkagent.xpc.plist
[killed] com.apple.secd.plist
[killed] com.apple.security.cloudkeychainproxy.plist
[killed] com.apple.spindump_agent.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
22 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.awdd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.diagnosticd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.GSSCred.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.periodic-monthly.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.softwareupdated.plist
[killed] com.apple.spindump.plist
[killed] com.apple.tccd.system.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
[killed] org.cups.cupsd.plist
20 processes killed due to memory pressure
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.sonos.smbbump.plist [Click for support]
User Login Items: ℹ️
iTunesHelper UNKNOWN Hidden (missing value)
Jawbone Updater Application (/Applications/Jawbone Updater.app)
Dropbox Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
Photo Center Plugin: Version: Photo Center Plugin 1.1.2.2 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
CitrixICAClientPlugIn: Version: 11.2.0 [Click for support]
iPhotoPhotocast: Version: 7.0
3rd Party Preference Panes: ℹ️
Citrix Online Plug-in [Click for support]
Flash Player [Click for support]
UE Smart Radio [Click for support]
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 319.21 GB Disk used: 124.16 GB
Destinations:
Time Machine Backups [Local]
Total size: 3.00 TB
Total number of backups: 98
Oldest backup: 2013-08-28 05:45:36 +0000
Last backup: 2014-12-30 19:39:32 +0000
Size of backup disk: Excellent
Backup size 3.00 TB > (Disk size 319.21 GB X 3)
Top Processes by CPU: ℹ️
5% com.apple.WebKit.Plugin.64
3% WindowServer
2% sysmond
0% AppleSpell
0% com.apple.WebKit.Networking
Top Processes by Memory: ℹ️
41 MB Finder
41 MB iTunes
37 MB Safari
32 MB com.apple.WebKit.Plugin.64
32 MB mds
Virtual Memory Information: ℹ️
53 MB Free RAM
501 MB Active RAM
463 MB Inactive RAM
398 MB Wired RAM
78.46 GB Page-ins
3.04 GB Page-outs
Diagnostics Information: ℹ️
Mar 7, 2015, 12:41:34 PM /Library/Logs/DiagnosticReports/Inkjet4_2015-03-07-124134_[redacted].crash
Mar 5, 2015, 07:42:29 PM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-03-05-194229_[ redacted].crashThat certainly looks like a low memory issue, 2 GB ram is barely enough to run Mac OS X versions from Lion through Yosemite. The high number of Page Outs and killed processes show very high memory pressure.
Try adding memory, but be sure it is high quality, Mac certified memory such as that from OWC, http://www.macsales.com or Crucial, http://www.crucial.com -
Problems going to sleep after 10.5 upgrade and new memory
Looking around the forums I notice lots of problems with sleeping computers and Leopard. Here's my story.
After upgrading my eMac with new memory (now at 1 GB) and Leopard, I have problems getting it to go to sleep after logging out. What happens is at the logout/login screen I click the sleep button, it goes gray for seven or eight seconds or so, then goes active again and the computer stays awake. I have to click-and-wait three times before the computer will sleep. It is a consistent bug in that I always have to click three times.
I figure this is more likely a Leopard problem than a memory problem. I bought the RAM off eBay but they are name-brand chips and haven't given me any problem.
Any thoughts?Andy,
I would pull out to the new RAM upgrade and see if your sleep issue is hardware related. If your Mac still doesn't sleep correctly, I would try reloading OS X from your retail discs, then upgrade to 10.5.2 making sure you use the Combo Updater instead of Software Update.
Keith -
Is memory leak Problem Solved in this new FW 4.08...
Hi frnds,This is my very first post. Im happy to be a member of N Series Family by owing a brand New N73 ME One Week Before (July 2008). The phone really Fascinated me with its features, Since my Previous Phone was Nokia 6630. Now let me Come to my problem.
A "Memory Full. Close some application" Error is encountering me twice or thrice a day. if i knowledge is correct, its Low RAM error & i found my RAM in the range of 18-20MB just after startup & along with usage of applications & closing, it maintain a range b/w 4-8MB. In this time wen i open a picture in inbuilt PicEditor this Memory full Error occurs(And sometimes while zooming a picture in gallery also). Will updating to the new FW according to my product code 0543843 is 4.0812.4.2.1 will solve the Memory leak problem ? i have gone through all the post regarding the issues on latest firmware updates Good & Bad. So im a bit confused that shud i update or not. Coz i have only this memory problem. Everything else is fine.
Please help me.
N73 ME
v 4.0736.3.2.1
04-09-2007
RM-133
Code:0543843
INDIAI have 4.0812.4.2.1 and I have the same problem..I think that in 4.0736 is best memory usage than other firmwares,but I can't downgrade firmware
-
Memory install problems with my iMac. Can someone help me?
I read several post before leave it my question here—like having similar RAM memory problems—but looks like nobody has the right answer. This is my dilemma.
I have an iMac/Intel Core 2 Duo/2.8 GHz/RAM 2 GB/800 MHz,(Anodized Aluminum) 1st Generation - Summer 2007 Family, and has many others here I bought an extra 2GB module in hope to boost the memory from 2GB to 3GB (the new 2GB memory module and the old 1GB).
I did the installation, making sure they fully seat into their sockets, turn on the computer, checking if the computer recognize the new memory module... and everything went right until I started working with the computer.
The first indication of a problem happen 15 min. after I installed the memory. The computer crash and I follow the normal procedures to restart the Mac. No problems for about one hour.
The second time the computer crash I was working an InDesign file, I did turn off and on the computer but this time it didn't work. There was no beep or other sound, nothing was shown on the screen. I took the new memory module out and replace it for the old 1GB.
Now is working just fine. Is this an Apple scam to make us buy expensive Apple memory modules? The module in question, the one that I bought brand new from memory.com for just $26—instead of the outrageous price of $100 from Apple Store—in as follow:
2GB DDR2-800 non ECC SO-DIM
This is the recommended module for iMac 2.8GHz Intel Core 2 Duo 24-inch at memory.com
http://www.memory.com/net/System.aspx?model=37204
I wondering if my problem could be the use of two different configurations (2GB+1GB modules) or is just a "conspiracy theory" that Apple want to make us buy expensive RAM memory.
If I bought a "wrong module", why the computer recognize the upgrade and I was able to work, at least for 2 hrs?sergei63,
It seems you did not purchase the correct memory! The memory for mid 2007 iMac (first generation Aluminum machines) is:
667 MHz, PC2-5300, DDR2 compliant (also referred to as DDR2 667)
Look in your owners manual and you will find this information. As you are finding out your machine will not run if it has incorrect memory in it.
My suggestion is return the RAM you received and purchase the specification listed above.
Regards,
Roger -
Lenovo 3000 J115 Memory/RAM Problem
Hi everyone. According to the Lenovo website, the Lenovo 3000 J115 machine type 7387 is capable of 4GB of RAM. It has two DIMM slots and supports single or dual channel DDR2 memory. I really wanted to run with 4GB of RAM and it was a deciding factor when I bought the machine.
I purchased two 2GB DDR2 memory sticks, put them in the machine, and the BIOS only shows 2.5GB. The machine runs fine like this, its just not using the memory. There doesnt seem to be anything in the BIOS to help me out with this. I saw some other people had similar issues with other manufacturers machines, but they only needed to enable something called Memory Remapping in the BIOS to fix the problem. There isnt this feature in my BIOS. I installed the latest BIOS hoping that it would help, but it didnt. I also tried a 2GB and a 1GB memory stick just to see what happens and it still shows 2.5GB even with 3GB of RAM installed.
Does anyone know how to get this machine to recognize 4GB of RAM, or even 3GB of RAM. I called support and at first they were trying to tell me it was a problem with Windows XP. Hmmm....I already told them I was running Windows Vista Home Premium. Which wouldnt matter anyway. If the BIOS doesnt see the memory, the OS wouldnt have anything to do with that. So how anyone could think it could be a problem with the OS is beyond me and flat out wrong. After explaining this and getting the team lead on the phone, they sent me out a new motherboard even though I was quite certain that wouldnt fix the problem, which it didnt. And now they are trying to tell me that it wont support 4GB of RAM after they cant think of anything else. The website says it does and that is why I bought the machine and the new memory, both of which I cannot return for a full refund.
Is there anyone else out there that ran into this? Anyone that has more than 2.5GB in their Lenovo 3000 J115? If yes, did you need to do anything special or did it just work.
Message Edited by akz28 on 02-22-2008 04:22 AM
Message Edited by akz28 on 02-22-2008 04:24 AM
Message Edited by akz28 on 02-22-2008 04:25 AM
Message Edited by akz28 on 02-22-2008 04:26 AMThe 3GB vs 4 GB limitation is actually a x86 issue, not operating system. A 32-bit system can only address 32 bits (4,096). There are a number of articles concerning this - Google 3GB vs 4 GB ram. Here is a link: http://www.codinghorror.com/blog/archives/000811.html
The issue is basically a 32 Bit system can only address 4,096 of memory adressing. However in simple layman terms, the system must address all items on the bus like sound card, video, bios, pci bus, etc. (and the addressing of these items is like using memory).
Anyone familar with the old dos days remembers the software and memory managers we used to move the video, bios, etc above the 1 GB limitation, that way we had 640 KB Memory available for the applications.
Now several years later, we have hit the limit again, the 32-bit architectural now puts the addressing of items above the 3 GB level, leaving the lower 3 GB for memory use. So if 4 MB is installed, the 32-bit system addresses the computer components, then allocates what is left in the addressing range to the memory, thus why some systems with 4 GB do actually get 3.5 GB.
So on systems with 4 GB, with large memory video card and several other addressable items, it is percievable to only be able to use 3 GB. In fact, the recommendation with 32 Bit systems is to install 3 GB memory.
However, I do not know why the system wont recognize the installation in 3 GB mode only (have you installed only 3 GB total and see what it does?) My K100 system has 3 GB ram, (3) 1 GB sticks in 3 of the 4 memory slots. The system does recognize all 3 GB.
In fact, this addresses the reason Lenovo only put 3 GB in my system (I thought 3 GB was weird), because 4 GB would not all be addressed and the additional ram would be a waste of money.
Additional comments from users indicates that applications typically can only use the lower 2 GB anyway, thus leaving the last 1 GB for the OS (Vista). Unless you have applications that can use more Ram, the difficulty in getting the system to address the Ram differently wont gain you much.
And even a 64 Bit OS may not fix the issue, because some chipsets are only 32 Bit, thus addressing the components in the same method, which maybe why your system only see 2.5 GB at the bios level.
How much video memory you have? What do you have the allocation to the video memory set at in the bios? -
Zen Vision:M 30GB recognition problems...Big t
Hi, 2 days ago i ran into a problem with my Zen. I had to charge it, as the battery was low and had to put some new music on it.. I plugged it into the USB port on my Laptop, where all of it's software is installed. The Zen wasn't recognized. Instead of the charging screen it normally started up with, it started up with the play screen(the screen it shows when a song is playing). I looked at the battery icon in the top right corner, and it wasn't doing anything. I turned the Zen off and started it up again. Nothing changed. I restarted my computer. Nothing changed. I shut down my computer and started it back up again. Nothing changed.
I took it to my desktop computer, a Compaq, and tried it there. It worked, but not how i was expecting it to work. The battery icon started flashing with the little lightning bolt, acknowledging that it was charging. But the play screen was still there. The odd thing with this is, i left the player to charge for several hours. When i came back, the Zen was in some form of idle shut-down. The screen was black, except for the battery icon with the lightning bolt. Oddly enough, he battery bar hadn't filled up anymore than when i left it. Upon unplugging the player though, the Zen turned off. When i turned it back on, the bar had filled up more. It wasn't fully charged though.
I plugged the cable back into it, and this time, the battery icon WASN'T charging. It just had the play screen on. It wasn't doing ANYTHING this time. Frustrated, i went out and bought the wall charger, and now i have a full battery. But it doesn't solve why my computer won't recognize my player.
Today, i un-installed the software that came with the player and re-installed it. It didn't do anything. I installed the software on my desktop computer, and THAT didn't work either. So i came to the website here and used the trouble-shoot guide. That didn't help, and this is where my problem differs from the other posters here who have recognition problems:
Back to my laptop: I have Windows Service Pack 2. I installed Windows Media Player . I went to the Device Manger, like the trouble-shoot guide said to. The kicker: Windows Portable Devices is NOT, i repeat NOT in my Device Manager. Neither does the Creative player either. I clicked on "The player does not appear in Device manager". That link showed me a diagram of a desktop computer, so went back to my desktop computer. I did everything above mentioned, and Windows Portable Devices is not in the device manager of my desktop computer either. Further reading the trouble-shoot guide, i could NOT locate "Other Devices" or "Unknown Devices" in my Device Manger on either desktop or laptop. There's nothing "Creative" related or "Zen" related at all in any of the Device programs.
I don't know what to do. All of the trouble-shoot guides don't discuss my issue at all. Everything is "If an MP3 player is reported working properly in Device Manager, but it is not detected or listed in Windows Media Player or Creative Media Explorer..."
Mine isn't even detected in Device Manager. My Device Manager has nothing regarding my Zen or Windows Portable Devices.
I'm thinking about messing with it in Recovery mode, but i don't want to erase everything i have on here, just to have my player still not work. I'm going to try messing with this at my friend's house to check the cable and the player there too.
But any help regarding my situation would be greatly appreciated. This is driving me crazy.I tried my uncle's Zen Vision: M 30GB on my laptop and strange things happened. My laptop recognized the player as an unknown device and said i needed to install the MTP driver. I did that, and upon doing so, my laptop recognized my Uncle's player as a Portable device, allowing me to transfer songs to his player. But it STILL doesn't recognize MY player. Email support says i have to send it in for repairs, but i don't know...
Any luck with you? -
K8n neo2 platnum memory soundcard problems.
I just recently bought this board and im having problems with it. here is what I have installed.
windows XP home edition (all updates installed)
AMD 64 bit 3500+
(4) 512 meg sticks pc 3200 underclocked to ddr 333 (mushkin blue)
liteon dvd rom drive (set to master)
liteon dvd burner (set to slave)
(2) 36 gig raptors in raid 0
ATI X800 pro
soundblaster live Xgamer (installed on orange PCI slot)
problem im having is when I play everquest or everquest 2 my computer crashes. I run checkit diagnostics that came with norton systemworks 2005 and it says my memory has erros. Ive already sent ram back to newegg bought new ram same problem. at first the motherboard wouldnt install the soundcard I moved it to a diffrent pci slot and it installed. However same problem checkit diagnostics still says I got bad memory and Im pretty sure well im sure that just cant be the case or I have to have the worst luck in the world to get bad ram 2X's in a row.
I did call mushkin today they told me there is problems with this board and soundblaster cards ive been looking for answers on the web and and found none so ive come here in search of some. Is my soundcard uncompatable with this motherboard? or do I need to set somthing up in the bios to make it compatable (im sure I have latest bios as I bought the board like 2 weeks ago so im sure thats not the problem eather)
any suggestions?
thanks.
(note for some reason with only 2 sticks of ram installed everything seems to work fine I told mushkin this they told me it has somthign to do with my soundcard that I need to contact MSI)I have a Sound Blaster Live! 4.1 (CT-4760), and I do get random crashes. Sometimes I'm stable for days, sometimes it happens more frequently.
Usually happens while playing Enemy Territory. The computer would freeze for about 20 seconds and would resume normally after that. No errors, no reboots, no logs. During those 20 seconds everything would lock, and I would get the sound loop.
But I could blame many things other than my sound card:
* Enemy Territory has proven to give problems before, like with video drivers, etc.
* I could blame my PSU only having 16A on the 12V rail (will upgrade soon).
* Or I could blame my ram not being the best out there. -
Memory Leak Problem at Adobe LiveCycle Server 9.0
Hi All,
We want to upgrade our system to 9.0. During the performance test we have found memory Leak problem at ALS 9.0. I explain the detailed problematic issue below. Is there any body who has any suggest?
We have Adobe Livecycle ES2 9.0 SP2 installed on WAS 6.1. But also WAS on Windows Server 2008 R2. We call java web services from .Net Web service for generating PDFs.
On Java side “com/adobe/internal/pdftoolkit/services/javascript/GibsonMemoryTracking” class is causing Memory Leak problem at server.
Our .Net Codes. I copied below. First we generate PDF then we convert this pdf to static pdf.
First We call the GeneratePDF function.
public static bool GeneratePdf(Document document, byte[] pdfTemplate)
try
//Create a FormDataIntegrationService object and set authentication values
FormDataIntegrationService formDataIntegrationClient = new FormDataIntegrationService();
formDataIntegrationClient.Credentials = new System.Net.NetworkCredential(Settings.ALCUserName, Settings.ALCPassword);
//Import XDP XML data into an XFA PDF document
ALCFormDataIntegrationService.BLOB inXMLData = new ALCFormDataIntegrationService.BLOB();
//Populate the BLOB object
inXMLData.binaryData = System.Text.Encoding.UTF8.GetBytes(document.XmlData);
//Create a BLOB that represents the input PDF form
ALCFormDataIntegrationService.BLOB inPDFForm = new ALCFormDataIntegrationService.BLOB();
inPDFForm.binaryData = pdfTemplate;
//Import data into the PDF form
ALCFormDataIntegrationService.BLOB results = formDataIntegrationClient.importData(inPDFForm, inXMLData);
document.PdfData = results.binaryData;
Utility.Log("GeneratePdf", "Pdf generated successfully.", LogLevel.Info);
return true;
catch (Exception ex)
document.ReturnCode = "22";
document.ReturnMsg = "Exception on generating the pdf";
Utility.Log("GeneratePdf", "Exception: " + ex.Message, LogLevel.Error);
return false;
Then We call the ConvertPDF function.
public static bool ConvertPdf(Document document)
try
//Create a OutputServiceService object
OutputServiceService outputClient = new OutputServiceService();
outputClient.Credentials = new System.Net.NetworkCredential(Settings.ALCUserName, Settings.ALCPassword);
//Create a BLOB object
ALCOutputService.BLOB inData = new ALCOutputService.BLOB();
//Populate the BLOB object
inData.binaryData = document.PdfData;
//Set rendering run-time options
RenderOptionsSpec renderOptions = new RenderOptionsSpec();
renderOptions.cacheEnabled = true;
//Create a non-interactive PDF document
ALCOutputService.BLOB results = outputClient.transformPDF(inData, TransformationFormat.PDF, PDFARevisionNumber.Revision_1, false, null, PDFAConformance.B, false);
document.PdfData = results.binaryData;
Utility.Log("ConvertPdf", "Pdf converted successfully.", LogLevel.Info);
return true;
catch (Exception ex)
document.ReturnCode = "22";
document.ReturnMsg = "Exception on converting dynamic pdf to static pdf";
Utility.Log("ConvertPdf", "Exception: " + ex.Message, LogLevel.Error);
return false;
Our System Configuration:
Expiry date: Never Version: 9.0.0.0,
GM Patch Version: SP2
Service Pack Version: unknown
ADOBE® LIVECYCLE® PDF Generator ES2
9.0.0.0
SP2
ADOBE® LIVECYCLE® Reader Extensions ES2
9.0.0.0
SP2
ADOBE® LIVECYCLE® Output ES2
9.0.0.0
SP2
We changed some configuration which is suggested by Adobe. But this change does not solve our problem.
Changed Configurations via ADMINUI
Memory Leak Problem which is viewed via wily tool:Hi Mahir,
Can you attach the results of this performance test where we can see how GibsonMemoryTracking class is causing the memory leak issue.
Also do you see any stackTrace in the LiveCycle server logs related to memory / heap when you run this performance test ?
Thanks,
Simer -
Does making objects equal null help the gc handle memory leakage problems
hi all,
does making objects equal null help the gc handle memory leakage problems ?
does that help out the gc to collect unwanted objects ??
and how can I free memory avoid memory leakage problems on devices ??
best regards,
Message was edited by:
happy_lifeComments inlined:
does making objects equal null help the gc handle
memory leakage problems ?To an extent yes. During the mark phase it will be easier for the GC to identify the nullified objects on the heap while doing reference analysis.
does that help out the gc to collect unwanted objects
??Same answer as earlier, Eventhough you nullify the object you cannot eliminate the reference analysis phase of GC which definitelely would take some time.
and how can I free memory avoid memory leakage
problems on devices ??There is nothing like soft/weak reference stuffs that you get in J2SE as far as J2ME is concerned with. Also, user is not allowed to control GC behavior. Even if you use System.gc() call you are never sure when it would trigger the GC thread. Kindly as far as possible do not create new object instances or try to reuse the instantiated objects.
~Mohan -
I've recently resurrected my old 6230i and begun using it again. However in doing so I've come across a wee problem.....
The big memory card that was supplied with the phone and hidden beneath the battery is only 32Mb - hardly sufficient to use the MP3 Player to any great deal. Looking at it I asserted that it was an SD type card and I went and bought myself a 4Gb one to fit in place of the measly 32Mb effort. Imagine my annoyance when, after buying the new memory card I couldn't get it to fit - it's just slightly too thick. On closer inspection I noted that the card I've bought is actually an SDHC card - but surely that shouldn't make any odds? Would it? Do I need to buy a stricly SD card, without the wee HC ad endum? Or, do I need to buy a smaller capacity memory card, possibly a 1Gb or 2Gb, in the hope that it's of equal thickness to the 32Mb one? Or, knowing my luck, am I just doomed not to get a memory card that fits because in actual fact there isn't one, because Nokia have played a huge trick on the unsuspecting 6230i purchasers????
I await your wisdom dear forum members.
ps......I humbly apologise if this question has already been asked countless times before!!!
Kind Regards,
Paul-D.The slot in the phone is for an MMC card. It may look like an SD card but not quite the same. Please do check with the card manufacturer for compatibility before buying. The phone is very old and may have compatibility issues with the higher capacity cards nowadays.
-
Memory leak problem while passing Object to stored procedure from C++ code
Hi,
I am facing memory leak problem while passing object to oracle stored procedure from C++ code.Here I am writing brief description of the code :
1) created objects in oracle with the help of "create or replace type as objects"
2) generated C++ classes corresponding to oracle objects with the help of OTT utility.
3) Instantiating classes in C++ code and assigning values.
4) calling oracle stored procedure and setting object in statement with the help of setObject function.
5) deleted objects.
this is all I am doing ,and getting memory leak , if you need the sample code then please write your e-mail id , so that I can attach files in reply.
TIA
Jagendrajust to correct my previous reply , adding delete statement
Hi,
I am using oracle 10.2.0.1 and compiling the code with Sun Studio 11, following is the brief dicription of my code :
1) create oracle object :
create or replace type TEST_OBJECT as object
( field1 number(10),
field2 number(10),
field3 number(10) )
2) create table :
create table TEST_TABLE (
f1 number(10),f2 number (10),f3 number (10))
3) create procedure :
CREATE OR REPLACE PROCEDURE testProc
data IN test_object)
IS
BEGIN
insert into TEST_TABLE( f1,f2,f3) values ( data.field1,data.field2,data.field3);
commit;
end;
4) generate C++ classes along with map file for database object TEST_OBJECT by using Oracle OTT Utility
5) C++ code :
// include OTT generate files here and other required header files
int main()
int x = 0;
int y = 0;
int z =0;
Environment *env = Environment::createEnvironment(Environment::DEFAULT);
Connection* const pConn =
env->createConnection"stmprf","stmprf","spwtrgt3nms");
const string sqlStmt("BEGIN testProc(:1) END;");
Statement * pStmt = pConn->createStatement(sqlStmt);
while(1)
TEST_OBJECT* pObj = new TEST_OBJECT();
pObj->field1 = x++;
pObj->field2 = y++;
pObj->field3 = z++;
pStmt->setObject(1,pObj);
pStmt->executeUpdate();
pConn->commit();
delete pObj;
} -
Memory leak problems with loading videos over and over.
I'm having memory leak problems with loading videos into a VideoPlayer aswell as FLVPlayback.
What the flash should do:
- Should be running for 7 days without having to restart the projector.
- Interface that shows people around a 360 3D model with 5 different parts and at the stops it makes during the rotation you can click to zoom in on a location which plays a movie for that aswell.
- Shows a video out of 5 parts for a 360 rotation in 3D in mp4 video (added each time and cleaned up, see code below).
- Still images are used when the video clips are done playing (MovieClip in stage).
- Should run automatically when there is no user interaction for X minutes.
What the problem is:
- The flash (as a exe and swf i guess) starts to consume memory over time (say 10 hours) until the projector crashes. This usually at around 1.75 GB of memory.
I cannot see why the Flash cannot garbage collect this and free up the memory. Mabye there is something I don't understand about the garbage collection in flash?
Here is some code from the video loading and playing:
var fVideo:VideoPlayer;
VideoCreate();
function VideoReady(pEvent:VideoEvent):void
trace("VideoReady()");
// start playing video
fVideo.play();
function VideoLoad(pUrl:String):void
trace("VideoLoad(" + pUrl +
VideoCreate();
if (pUrl != "")
if (fVideoFolder + pUrl == fVideo.source)
fVideo.seek(0);
VideoReady(null);
} else {
trace(fVideo.state);
if (fVideo.state !=
VideoState.DISCONNECTED) fVideo.stop();
fVideo.close();
fVideo.load(fVideoFolder + pUrl);
} else {
// error no url
function VideoCreate():void
trace("VideoCreate()");
// remove old one
if (getChildAt(0) == fVideo)
removeChildAt(0);
fVideo = new
VideoPlayer(1024, 768);
addChildAt(fVideo, 0);
fVideo.autoRewind = false;
fVideo.addEventListener(VideoEvent.COMPLETE, VideoDonePlaying);
fVideo.addEventListener(VideoEvent.READY, VideoReady);Hmm. It's in connection with Dropbox. Så apparantly you can only use one of the two at the same time if you want the programs integrated in Finder.
-
How can I avoid memory leak problem ?
I use Jdev 10.1.2 . I have a memory leak problem with ADF .
My application is very large . We have at least 30 application module , each application module contain many view object
and I have to support a lot of concurrent users .
as I know ADF stored data of view object in http session .
and http session live is quite long . when I use application for a while It raise Ouf of Memory error .
I am new for ADF.
I try to use clearCache() on view object when I don't use it any more .
and call resetState() when I don't use Application Module any more
I don't know much about behavior of clearCache() and resetState() .
I am not sure that It can avoid memory leak or not .
Do you have suggestion to avoid this problem ?ADF does not store data in the HTTP session.
See Chapter 28 "Application Module State Management" in the ADF Developer's Guide for Forms/4GL Developers on the ADF Learning Center at http://download-uk.oracle.com/docs/html/B25947_01/toc.htm for more information.
See Chapter 29 "Understanding Application Module Pooling" to learn how you can tune the pooling parameters to control how many modules are used and how many modules "hang around" for what periods of time.
Maybe you are looking for
-
Why won't my phone display photos horizontally?
4s with ios 7 will not display photos or videos horizonally?
-
Is there any problem running again "bdls" after being disconnected while r
Hello I have an emergecy question Is there any problem running again "bdls" after being disconnected while running it (my network connecton to laptop got broken) Thank you in advance
-
I cant open picasa web albums in firefox
google says they cant find Picasa website
-
Server Crash - Recovery Options
Our Leopard Server has crashed whilst implementing the latest automatic software update. When I boot from DVD or another drive, it mounts the old 10.5.2 server partition, but locked as read-only. I have tried repairing with Disk Utility to no avail a
-
Reading data which was wrote using fm BAL_LOG_MSG_ADD
I have two queries: 1) My z program is writing logs Using fn modules BAL_LOG_CREATE and BAL_LOG_MSG_ADD <b>Where can I view the log. Which tcode?</b> I have seen <b>SM21</b> but there is no entry for my transaction. 2) What is the suitable way of wri