New message after pacman-optimize. Which sync operation?

After running pacman-optimize:
==> Finished. Your pacman database has been optimized.
==> For full benefits of pacman-optimize, run 'sync' now.
Is it asking me to sync pacman, (pacman -Sy) or just run
# sync

Cerebral wrote:
From man sync:
SYNC(1) User Commands SYNC(1)
NAME
sync - flush file system buffers
SYNOPSIS
sync [OPTION]
DESCRIPTION
Force changed blocks to disk, update the super block.
That certainly sounds like it'd give you the full benefits of pacman-optimize, which is essentially a defragger.
Running pacman -Sy immediately after running pacman-optimize might just undo some of the work pacman-optimize did, since it downloads entirely new sync repos and replaces the existing ones.
Makes sense.

Similar Messages

Pc suite 7.0.8.2 no new messages after unicode SMS...

I was using 7.0.8.2 on XP quite happily until a strange problem appeared. after receiving a multipart unicode SMS on my 6300, pc suite was no longer aware of any new messages - i.e. when I look at the "inbox", it had every message up to the unicode (chinese) message, but nothing newer than that. that makes the program no longer useful for me. I did not have this problem with any of the previous versions of pc suite. (I am a long-time user).
has anyone else had this problem?

You can try to move that unicode SMS to SIM card.
What's the law of the jungle?

Cannot view new messages after setting up Gmail

I had problems setting up my IMAP so had to delete my Gmail account and reinstall. Anyway, I have about 12K emails, and can view some, but I have 200 new message that I CANNOT View.
Any suggestions??? I've tried nearly everything.
Should I disable POP is IMAP is enabled?
Thanks

Update: message sent from Mozilla to confirm this new message does appear, so it seems that messages received today 9/26 that were sent before Thunderbird updated to 31.1.2, are not viewable. The header appears but not the message itself. Messages created before midnight are appearing, this is most strange. Maybe the messages from today will appear after midnight.

Nokia c3-00 cannot write a new message after firmw...

Hi
My problem afther update to firmware v8.63 is that i cannot write a new message
Shortcut <- keypad (pressing left directon on keypad)
or when i go to MENU>MESSAGES.NEW MESSAGE then nothing happends
i can reply or send a new message to someone by the replying option and changing target number, or using the call log but its quite anoying, and 2 social icons in menu.
i have already tried
1. reset to factory settings - FAILED to fix problem
2.reinstaling phone update - FAILED to fix problem
MODERATOR'S NOTE: Subject line changed.

you need to do a master reset on the phone but before you do that make sure to backup you files without the settings and applications on your comp using the ovi suite bec master reset will remove eveything that you have on your phone memory. after the backup dial this code on your phone *#7370# lock code 12345. if your phone is turned on again try now to send a new text message. if it will allow you now, restore now you backup file but dont include the settings.
MODERATOR'S NOTE: Subject line changed.

SMS inbox doesn't show new messages after upgrading to OS 5.0.0.681. SMS format appears as IM.

My SMS inbox doesnt show new messages and also my Curve 8900 doesnt prompt for any new messages. However, the Mobiso application (which logs calls, texts) shows messages coming in with its text lengths. I asked this to Blackberryhelp on Twitter but it said to contact service provider, but there is nothing wrong with it. The format of the SMS inbox should have something wrong otherwise the Mobiso application should not have logged all messages.
Please help me, i am missing all my daily SMS since last 20 days.
Will degrading the OS help? Which is recommended OS version for BB Curve 8900?

Hi,
Here are some good articles listing the available methods for organizing and displaying messages in device OS 5.0. If you can't set your exact preferences I suggest looking in AppWorld for custom programs.
Let us know how it goes!
Thanks,
Bifocals
What is new in BlackBerry Device Software 5.0
Option for separate SMS and Email message inboxes is missing
How to integrate SMS text messages with BlackBerry Messenger 5.0
SMS text messages received from multiple senders appear in the same conversation thread on the Black...
Organizing your inbox’s main Messages list
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Problem with new message after creating a note

Has anyone else had this behavior in Mail 3? It happens to me quite frequently- the problem goes like this:
Create a new note
Hit done on the new note to save it
Then, when trying to create a new message, nothing happens. I can hit the button all day and nothing happens.
Next, upon quitting mail, I see all of these drafts show up and when I restart Mail, there are as many blank drafts as times I tried to create a new message.
I've sent a bug report. It doesn't happen all the time but it has happened a lot to me.

Yes!
I have this same problem. I had not bothered to track down its root cause, but I do (rarely) use the Notes feature in Mail, so that may well be what triggers this annoying behavior.
-Tony

Create new message after new ical starts

hey all... been looking for a thread on this but didn't see it.
when i first launch the new ical app and create a new event then attempt to enter the title (subject?) for that a event ical interrupts the process and closes the event even though i haven't finished entering the title.
sometimes it will throw me into the edit event mode (like when you hit cmd E on an existing event) and blur the focus from the subject of the event.
i can see ical trying to sync when this happens (icon by [email protected] on top of my calendar list). and typically it only happens for the first few seconds after ical launches. of course - i could just leave ical running but i do a lot of hd video and high end graphics editing and i don't want to use system resources for ical if i dont' have to.
makes sense to me - launch the program, add event, close program. pretty much how i use everything on os x. when you're done with a program you close it.
anyone else seeing this?
k

bump.
anyone seeing this problem - ical won't let me enter a topic for new events and instead loses focus from the entry... only happens for first minute after launching ical.
this has only been happening since upgrading to the new mobile me version of ical. never happened before but now it's pretty much unusable. see previous post for full description.

HT1296 so itunes deleted all my music from itunes, I still have all the original files however I unwittingly added new music after this happened which wipes the itl and xml files. I have my playlists on my iphone. how do I get itunes back to its original

If this cant be resolved I think apple and I shall be parting ways its been a long time in the coming

Also, what causes this, so I can avoid it in the future?

Error message after syncing

I get the following windows error message after my 80G iPod syncs:
There is no disk in the drive. Please insert a disk into drive M:.
I don't have the box checked to enable disk use.
HP Windows XP

I would take it back to the store that you purchased it at and get a refund. Or alternatively, if there is an Apple store near you, take it in there and see what they can do for you. How old is your iPod? If it's been less than a year or you purchased and extended warranty then it shouldn't cost you anything to get it fixed or looked at.

Deleted names appearing in the "To" line of a new message

Hi, Everytime I choose an email address to send a new message, after entering one or two letters, my selection of contacts includes addresses that I've deleted in my address book and no longer need. Is there a cache or folder somewhere that I can delete to stop this happening?
Many thanks
Kevan Frost

Hello Kevan.
The Mail.app stores all message recipients in the list of Previous Recipients in Mail (which are stored in the Address Book data file) and the address autofill feature pulls from the Address Book and list of Previous Recipients.
At the Mail.app menu bar, go to Window and select Previous Recipients.
A previous recipient that is already entered in the Address Book will have a vCard icon to the left of the name or email address. You can remove a previous recipient from the list or add a previous recipient to the Address Book.

Mail - New message

When using mail, can I open a new message in a new window so that I can still browse old messages without having to close and reopen the message all the time?

It wasn't clear what you wanted to do and I thought you meant to read a new message separate from the mail window. If you mean to Compose New Message, after you click on that icon, if you want to go back to the mail window while keeping the compose new message open, just click on the top portion of the mail window, where the colored dots live. That will bring the mail window to the front and the composing window will be in the background. Just go back and forth between the two as you need to.

I am a newbie...and I think I did a big no-no as my Ipad isn't working. I synced it to a second computer at work which is a new Imac after already syncing to my pc at home with Itunes. Now it says it can't restore and can't get it to open. HELP!

I am a newbie...and I think I did a big no-no as my Ipad isn't working. I synced it to a second computer at work which is a new Imac after already syncing to my pc at home with Itunes. Now it says it can't restore and can't get it to open, getting error messages but can't fix myself. Can anyone help??

iPad can connect only in one iTunes Library. If you want to connect it to a iTunes Library then you have to erase it. You can erase it from iTunes. Make sure you iPad doesn't have a password, or if it has a password make sure that you connect to the computer and enter the password of your iPad

HT204053 I loaded the new iTunes (11.0.0.163) on my computer and also just purchased a new iPhone 5. Prior to loading the NEW iTunes, I was able to sync with my new iPhone 5. After I loaded the new iTunes, I now get an error message: 0xE8000084. What's

I loaded the new iTunes (11.0.0.163) on my computer and also just purchased a new iPhone 5. Prior to loading the NEW iTunes, I was able to sync with my new iPhone 5. After I loaded the new iTunes, I now get an error message: 0xE8000084. What's up?
Also, it says the iPhone 5 is not registered to my Apple ID.

See if the troubleshooting for 0xE error codes on this page helps : http://support.apple.com/kb/TS3221

Mail notification sound plays after I have read a new message

When a new message comes in, the mail sound does not play right away. Often I will see the email and read it. Then, some time after I've finished and the screen is locked again, the sound plays.
This problem occured with iOS 4 and still happens in iOS 5.

Hi,
I have had chats/conversations that have shown the blue "unread" indicator which goes if you reselect the chat but appears again when you select another Chat.
I have also had the red Unread number indicator showing on the Dock icon badge as a separate issue.
This second I have resolved in Force Quitting the DOCK in Activity Monitor ( I will use Terminal but prefer an User Interface option).
The first I tend to solve by dismissing that particular Chat/Conversation.
As you have tried the DOCK reset method by both the recommended methods of doing so I would try a PRAM/NVRAM reset.
Restart the Mac holding down the CMD+ALT+P+R keys all at the same time until you have heard three Start up Bongs.
You can then let the Start up Continue.
8:58 pm Friday; January 2, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

HT1386 I get an error message when I try to sync my iPod touch - "you do not have enough access privileges for this operation"

I recently installed a new hard drive on my PC, downloaded iTunes, updated the software on my iPod touch and now I get this error message when I try to sync: "you do not have enough access privileges for this operation." It never did this before, whether it's the upgrade in software or something in iTunes, but it's very frustrating, since I'd like to add more things to my iPod.

See:
iPhone - not enough access privileges: Apple Support Communities

New message after pacman-optimize. Which sync operation?

Similar Messages

Maybe you are looking for