New Message Doesn't Show on Icon in Dock

I've created a new Mailbox folder for a client and have a Rule for all messages that come from him to automatically go into that folder. This works just fine but when a message comes from him and is sent to that Mailbox the red circle that usually shows up on the Mail icon in dock when new unread mail is received doesn't appear. So I don't know I have mail from him until I unhide Mail.
Is this just a feature that Mail doesn't have?
Thanks.

There's a program called DockStar that lets you put badges on the dock icon for different folders. It's shareware and available here: http://www.ecamm.com/mac/dockstar/
I've got a smart mailbox named "Unread messages" that just collects ... all my unread messages (I do a lot of automagic sorting) and then have DockStar show how many messages are in that smart folder.

Similar Messages

When I attach USB flashdrive to my new Mac Air no icon appears. I just finished downloading pictures off of old mac and that one worked as expected.The new computer doesn't show anything but when I pull USB out pompts message improper eject. Any ideas?

When I attached my USB flashdrive to my new Mac Air no icon appears and the same when I attached my new superdrive. I just finished downloading pictures off of my old Mac and that one worked as expected. The new computer doesn't show anything but when I pull the USB flashdrive out, a message prompts me with an improper eject notice. Any ideas on why no icon (a disc) appears and how can I get it to?

Open Finder preferences, click on the General icon in the toolbar. Check the boxes for what you want displayed on the Desktop. Click on the Sidebar icon in the toolbar and do the same for what you want displayed in the sidebar.

I have just upgraded to Mountain Lion and my signatures for my Mail is not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice

I have just upgraded to Mountain Lion and my signatures for my Mail are not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice. Yesterday, the signatures were stacking instead of switching to the one I wanted to choose.

I had this and fixed it.
I had upgraded to Mountain Lion and my signatures in Mail were fine. But then about a week later, I got a new computer and used Migration Assistant to copy my stuff to the new machine. Upon opening Mail, I had all the correct Signature information in the Preferences>Signatures window, but nothing worked.
After lots of hunting, I found the Signature Folder. It's in:
Yourusername>Library>Mail>V2>MailData>Signatures
Looking at my previous setup (which works) I saw in that folder two types of files: .webarchive and .siganture
Looking in my new machine's Signature folder, I saw only the .webarchive folders, not the .signature folders
Since this was literally a clone of my previous setup to a new machine, here's what I did:
1. Quit Mail
2. In Problem machine, go to
Yourusername>Library>Mail>V2>MailData>Signatures
3. Move the Signatures folder someplace safe, but out of the MailData folder
4. Get the Signatures Folder from the working install (like a backup) and copy it to the MailData folder on the problematic machine
5. Start Mail on the problem machine
This worked for me. I don't know why Migration Assistant didn't copy the full signature folder, but this fixed it. It worked perfectly partly because I had just backed up with Carbon Copy Cloner and the very next day set up the new machine. I don't know where Lion or earlier versions of mail stored signatures, but the absence of the .signature filetype seems to be the problem.
Hope this helps

Purchased a tune on iTunes that shows up in my iTunes playlist on my PC but when I try sync with my iPod nano, the new song doesn't show up.

I purchased a tune on iTunes that shows up in my iTunes playlist on my PC but I tried many times to sync my iPod with iTunes and the new song doesn't show up in my iPod.
Any idea how to fix that?
Thank you for your help!

Hello there Beluga111,
It sounds like you have a newly purchased song that is not syncing to your iPod Nano, but there is no error message. I would start by restarting your computer, and resetting your iPod with this article:
How to reset iPod
http://support.apple.com/kb/ht1320
Sync the device again, and if the issue persists, I would restore the iPod Nano with this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
Thank you for using Apple Support Communities.
Cheers,
Sterling

After transfer mail to new computer new message content not showing in view mode

I've been transferring data from OSX mavericks Macbook pro to imac using airdrop (migration assistant wasn't working).
Wanted to duplicate mail from macbook so followed instructions for transferring as below
http://www.macworld.com/article/1166999/transfer_email_from_one_mac_to_another.h tml
Mail transfer worked great but my new messages aren't showing the content in the view area.
I can get the new message blurb in the list but nothing in full viewing.
The com.apple.mail.plist file actually was a plist.lockfile so not sure if that made a difference
Plus, I did transfer the com.apple.mail-shared.plist as well. The older versions are on my desktop.
The account names are different from one computer to the other but they show up as read-write on new computer files. I even added an administrator with read write priveleges on those files just incase. Nada.
Any thoughts?

Rebuild the mailboxes.

Support message doesn't show automatically the details about created person

Hi,
I'm facing an issue with Support message which has been created in Sattelite system and available at Solution manager system . The issue is , support message doesn't show automatically the details about created person under colum ' Contact Person ' . Please provide your great suggestions , thanks
Regards
Vivek

Hi Vivek,
Check if BP is created for that user and you have mapped to satellie system (identification tab)
e.g TRXN BP create business partner for that user and in identification tab maintain
ID type identification number
CRM001 <SID> <inst number> <CLNT> <User> (satellite system details)
Regards,
Shyam.

New photo doesn't show up after updating page.

Hi all,
I created a page and uploaded it to my site. Later I added a new photo at the bottom of the page, added a stroke around it and added some text as well. I saved the page in iWeb and uploaded it to my server. Everything looks good in iWeb but the new photo doesn't show up on my site. The text is there as well as the stroke around the photo, but no photo. I have tried resaving and reuploading. I have also cleared my cache. Also, the file for the photo is now in the folder on my computer. It's like iWeb displays the images but hasn't saved it on my hard drive. Any ideas? Thanks.
MacBook Pro Mac OS X (10.4.9)

Hello Tracy,
First, hit refresh once or twice when you are at the offending page. Next, a few questions: what browser are you using and are you hosting on .mac or another service?
If refreshing the page doesn't fix the problem try and verify if the photo is being uplaoded online. Do this by checking under the support files for that particular page.
Here is an example of how to do that from my site: http://web.mac.com/ekashley/iWeb/Ash%20Films/Welcome.html has a large image of an orchid. I can verify that the file is there by going to http://web.mac.com/ekashley/iWeb/Ash%20Films/Welcome_files/Color%20Orchid.png and the photo will load by itself, proving it is there.
An easier way would be just to look under your idisk folder. But there is more then one way to verify.
Kind Regards,
—Eric
Ash Films
http://web.mac.com/ekashley

New RAM doesn't show on System Profiler

Hi, I just installed additional 1 Gb of RAM in my Mac Pro but the new RAM doesn't show on System Profiler whether I have it inserted on Riser A or B but everything is working fine. What gives?
By the way, my Mac Pro has 2 x 512Mb RAM pre-installed on Riser A and I didn't buy the new RAM from Apple. Thanks for the help.

Hi Kappy,
I don't think the 1Gb RAM I bought is faulty cos:
1. It shows on System Profiler when installed on Riser A DIMM 1 (without original 2 x 512Mb RAM)
2. It shows on System Profiler when installed on Riser A DIMM 1 with 2 x 512Mb on DIMM 3 & 4
The funny thing is in scenario 2, System Profiler shows that I have a total of 1.5Gb. 1Gb on Riser A DIMM 1 and 512Mb on DIMM 3 appear but not the other 512Mb on DIMM 4. Why???
I'm beginning to think that I should have bought 2 x 512Mbs instead of one 1Gb. So I'm getting 1.5Gb of RAM instead of 2Gb!
Do you think if I purchase another one 1Gb RAM and have them installed in sequence (1Gb DIMM 1, 1Gb DIMM 2, 512Mb DIMM 3, 512 DIMM 4), I would then have 3Gb installed?
Thanks for your help once again.

Help, My Safari doesn't show its icon and will not open?

So heres some help for you:
1. Im a new member, not an idiot when it comes to computers but in no way very expeirenced and knowledgable.
2. I recently was informed I had 0 disk space left, so I deleted a lot of stuff and feel I may have accidently deleted something..
3. My safari does not open
4. It doesn't show the traditional Compass Icon for Safari it is a blank white page..? With the Applications Logo on it.. ( see picture below )
5. Yes, I basically only registered so I can ask this question ...
6. What on earth can I do to fix it!
- Heres a pic..
Quickpost this image to Myspace, Digg, Facebook, and others!

Hi Lax561,
Welcome to discussions ...
I can see that Safari is NOT in the Dock ...
Did you check out if Safari is still in the Application folder ?? open Finder an go to the application folder.
If it's still there than you can drag a copy to the Dock.
Do the following ... Select Safari icon an hold down the mouse an the Option key ad the same time while dragging to the Dock. During dragging you will see a + (plus) next to the Safari icon.
Place the Safari icon in the Dock where you like it, next to the Fire Fox icon is maybe the best place to put it.
Post back with the results ...
Dimaxum

Mavericks's Messages doesn't show picture instead it's a file to download

Hi Everyone,
I installed Mavericks and now Messages app doesn't show pictures messages from senders, but it's a file to download. I still see the picture I sent out but not pictures coming in. I didn't have that issue with Mountain Lion. Can someone please help? Thanks in advance.

Hi,
Messages 8 in Mavericks seems to handle pictures differently thnan Messages 7.x.x (Mountain Lion) and the iChat versions before that.
It seems it is now a function to "syphon" off pics to an Attachment folder and show only the spyglass item in the Conversations (iMessages) or Chats (buddies) to "recall them causing them to open in Preview.
It seems this will happen at different points time wise but has some relationship to how far the pic may have disappeared "up" the Chat.
This chat with "myself" spread over an AIM and an iMessages chat with my iPhone shows older item I sent not being displayed but one between Christmas and New Year still shows.
If I have the top hat pic on the left that is from my iPhone using the iPhone number.
Some are just the sync coming back which then show the Sig pic of the Mac Send of the iMessage.
I did have an issue where new Pics sent from the iPhone were going to the Downloads folder and not showing in the Chat window at all.
Nor could I iMessages the iPhone.
I could select the iPhone Number to send it too but as soon as I hit the enter key the Conversation seems to completely disappear and nothing was sent.
I deleted com.apple.ichat.plist for ~/Library/Preferences
Open the Finder > Go Menu > Go to Folder and enter that path in the dialogue box.
find the file and Drag it to the Trash.
Restart the app.
8:58 pm Monday; February 3, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

[SOLVED - Doh!] New kernel doesn't show up in grub menu

I've decided to play around with a new kernel, so I followed the instructions in the wiki for building the linux-pf kernel (ie, used the AUR). Although it doesn't include this step, I also ran grub-mkconfig. I can see a new Linux kernel in my /boot/grub/grub.cfg file.
However, it doesn't show up in the Grub menu when I reboot. I don't see any other step in the wiki, for either linux kernels or grub. What am I missing?
Last edited by jdarnold (2013-09-18 23:55:16)

@op - If you see it in /boot/grub/grub.cfg and that is the file grub is reading, you will see it when grub goes live. Do you have a separate /boot partition and did you have it mounted when you updated the config? I'm guess you didn't and your config went on the root file system under /boot rather than to a mounted filesystem mount in /boot.

New Superdrive doesn't show up in System Profiler

My old superdrive died on me, so I ordered a new one from powerbookmedic.com.
After installing, it doesn't show up in System Profiler. I've quadruple-checked the connection and I can hear it make regular healthy sounds when booting up so I know it's getting power but once I'm inside OSX; nothing.
I tried resetting the PRAM and SCM as recommended on this forum for various superdrive trouble. Although it didn't change anything and I'm guessing don't apply here.
Any tips for getting OSX to recognize my drive?

It's equipped with a SATA drive - that's why.
Just take a look further down ..
Printers
SAS
Serial-ATA <--
USB

H:Message doesn't show message

In my bean, I do some check and add message to FacesContext ,
than, navigate it to error page, just use <h:messages/> to show error messages. but it show nothing, Why?
here are my source:
in java source:
FacesContext ctx = FacesContext.getCurrentInstance();
ctx.addMessage(null, new FacesMessage("No such postcode"));

navigate it to error pageHow are you doing it? Sounds like that you're creating a new request instead of doing a redirect. This will reset the "old" messages. I am not sure but you might try to redirect using requestDispatcher.

TS1373 plugged in new ipod, doesn't show in itunes

purchased new ipod nano touch, plugged into computer, doesn't show in itunes, when plugged in just shows as white screen and says do not disconnect, but never does anything.

Maybe your ipod is not formatted for the pc. Try reformating it to FAT.

Gmail/Exchange Account Not Alerting to New Messages? Not Showing Notification?

So, I had an issue with my phone yesterday and had to reset everything on my phone and start from scratch again. Got everything all set up, set up my Gmail as an exchange account so that I can have my emails pushed to me, but whenever i get new emails, there's no alert tone like i used to have and there's no message showing at the top of my iphone like i used to have either. and yes ive already checked the correct exchange settings for gmail and the notification center. What can I do to fix this?

Hello vchecque, follow the steps below to correct the issue with your Mobile e-mail:
First remove the application:
- Select Media Center (Get it Now)
- Select Browse & Download (Tools on te Go)
- Select Mobile E-mail
- Select Options
- Select Remove/Erase/Cancel Subscription
To reinstall the application
- From the main screen, select Menu
- Select Media Center (Get it Now)
- Select Browse & Download (Tools on the Go)
- Select Get New Applications
- Select Mobile E-mail
- Select the purchase option.
- If prompted, select Yes to start the download
- If prompted Select Yes
- On some touch screens, touch the screen to continue
- To continue the installation, review the Terms of Use, then select Accept
- Select the desired e-mail provider (AOL in your case), then choose Select
- If prompted, review the Terms of Use for the e-mail provider, then select Accept
- Enter the username and password then select Sign In
- Username and password are case sensitive
Once you reinstall the mobile e-mail you can go back into your Options to "Alert me for new message" "Always".
Here is a link for additional information http://support.vzw.com/clc/faqs/Mobile%20Email/faqs.html
Thank you,

New Message Doesn't Show on Icon in Dock

Similar Messages

Maybe you are looking for