New message symbol wont stop flashing

just had my phone back from repair ( loose  screen)
Now the new message envelope symbol in the top lefy hand corner of the screen wont stop flashing
i have reloaded the latest software ( took an hour via the nokia website)
what can i do
or do i send it back again for repair

Try this..
Menu
Messaging
Options
Sim Messages
You will probably find, you have messages held there.
Delete them, and hopefully the symbol should go.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

Similar Messages

  • Wvc54gca Wont stop Flashing

    I have 2 wvc54gca's that worked fine until now. i changed encryption settings on my router (WRT54gs) and when i when to set them on the cameras i couldn't log on to them. So I reset the cameras and now the blue light wont stop flashing.

    Hardwired the camera to the Router.Turn-off the camera for sometime.Turn it ON back again...No go to the router's setup page and check the ip address of the camera under client table...Open the setup page of the Camera and reconfigure it from the scratch.

  • Airport Express wont stop flashing

    I have my AE set up to extend my wireless range from my Time capsule.
    All works fine except the AE will not stop flashing
    i have rebooted everything
    i have re-installed everything
    i have re-set everything
    but still the AE will not stop flashing.
    any ideas?

    A persistent, flashing amber light indicates that any of the several potential conditions may require your attention:
    o The base station has not yet been configured because it is new, or the reset switch has been set.
    o You have selected a security configuration that is not recommended.
    o One of several other conditions, such as a disconnected Ethernet cable or invalid IP address has been detected.
    (ref: http://docs.info.apple.com/article.html?artnum=305101)
    If you run the AirPort Utility, it will show an amber circle on the summary page next to the area(s) causing the problem. Click on this amber circle and it should provide an explanation.

  • Using OS 10.5.8, Apple Mail, new message symbol appears but not the mail

    Using OS10.5.8, apple mail, it shows I have a new message but when I go to that mailbox there is no message. Then when a new message comes in, the first hidden message is now gone. What happened to it, was it really there in the first place?

    Hello, as a test...
    Make a new Smart Mailbox that only includes Unread Mails, do they show in that Smartbox?
    Not certain, but this can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup),  it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.
    If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
    /Users/YourUserName/Library/Mail/MessageRules.plist
    /Users/YourUserName/Library/Mail/MessageRules.plist.backup
    Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.

  • Why doesn't the new message indicator number match the number of new messages I have or don't have?

    I am using a MacBook Pro and the new message indicator has stopped tracking correctly. For example, I have read all the messages in the inbox and the new message indicator still says that I have 5 new messages. Other times I have a new message and it is not registering with the indicator.
    I have tried shutting Mail down and reopening it. This does reconcile the indicator but does not solve the problem. I have checked for and installed any updates. I am using Mail Version 7.3 (1878.6) and OS X Version 10.9.4
    Any help would be greatly appreciated.

    Sorry, I'm not sure why Firefox 6 is no longer remembering your zoom settings, but installing the '''[https://addons.mozilla.org/en-US/firefox/addon/nosquint/ No Squint add-on]''' might help. No Squint provides options to remember zoom settings for specific web pages, or for all pages.

  • LED won't stop flashing, even when there are no new notifications

    The LED on my BlackBerry won't stop flashing, and I can't work out why. I have no new emails, messages, Facebook notifications, Twitter mentions, appointments/calendar events, and the LED didn't flash for new articles in the TIME magazine app any way. None of the other apps have anything to notify me of either.
    I updated the OS some time ago, so I can't see that being the cause for the problem, which means I can not work out why the LED is still flashing, unless my BlackBerry is broken.
    Has anybody else had this problem?
    Running OS v4.6.1.310 (Platform 4.2.0.127)
    Solved!
    Go to Solution.

    Hi danphynes,
    Are you still experiencing this issue? If so, what color is the LED? Can you verify that the LED coverage indicator is disabled in Options -> Screen/Keyboard? Is the LED flashing red continually or does it stop for periods of time?
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • HT5361 MacMail has stopped noting when I have read an email.  For example, I had 17 unread messages, so I read them.  Despite me having read them AND deleted them, the inbox still has 17 new messages displayed.  Can anyone help resolve the incorrect displ

    MacMail has stopped noting when I have read an email.  For example, I had 17 unread messages, so I read them.  Despite me having read them AND deleted them, the inbox still has 17 new messages displayed.  Can anyone help resolve the incorrect display?

    Lord K.  Thank you. Yes I am within the 90 time period, however I travel Intertionally and I can not receive not make a call to Apple. I was just at the Genius Bar in Chicago and they said, don't worry about it.  It just floats out there, however, I can not recover my messages on a flash drive. I need to go back to my old computer which I don't have with me.  My messages were in folders for a lawsuit.  It is going to take an incredible amount of work for me to, you have no Idea.  We are talking thousands of pages!  I the defendent will have them during discovery so I am not so worried.  However, I can not bring them to him on a Flashdrive when I meet with him without an extraordinary amount of presssure on my part.  THis is not just some little email issue. This is suing EXPEDIA and Tripadviosr.com

  • N80: Envelope symbol missing although new message

    Hi,
    I have a problem with my nokia N80.
    Normally when there is a new text message, an envelope symbol appears on the main screen of my nokia. This same envelope symbol is also shown when the phone is in stand-by and shows basic information such as date, time, missed calls and the envelope symbol.
    The problem is that the evenlope symbol is now missing on the main screen. It still appears on the stand-by screen and also when I'm in the messages menu, it shows that there is a new message.
    My question is of course: how to get this envelope symbol back in my main screen?
    To be precise, by main screen I mean the default, home screen of your nokia, showing things as time, provider, battery, calender, WLAN-scan.
    I have updated tot the last symbian version.
    Kind regards,
    Wouter
    Message Edited by woutiir on 28-Jul-2009 08:50 AM

    Hi,
    I have stored my messages on a memory card and it seems that here lies the problem. When I eject the memory card and the messages are stored at my telephone memory,it shows the envelope again. However, as soon as I put in my memory card again, and change the message settings so that messages are stored at the memory card, the evenlope stops showing.
    Do you have any ideas on this?
    Kind regards,
    Wouter

  • Ive tried loading this new software, and step 1 and 2 were successful, but after trying to restart the loading grey screen wont stop loading?

    ive tried loading this new software, and step 1 and 2 were successful, but after trying to restart the loading grey screen wont stop loading?

    I had a similar problem, does the phone show anything on the screen, for example "update failed, connect to computer" if it does, try opening "Sony PC Companion 2.1" click start on "support zone" then click "phone/ tablet software update" a message will pop up, press repair my phone / tablet, select your phone in the list, then follow what it says, try doing this even if the phone shows nothing, you will lose everything, all data will be gone if you follow my steps

  • New message flashing in taskbar

    I have the latest version of Skype I am running windows8.1 on Surface Pro3.
    How can i stop a message flashing in my taskbar when someone calls me and i am showing invisible?
    I do not want everyone in the room to see i have a message.

    Hi Adrian,
    there is no need for cut and paste the signatures for every e-Mail. Just follow the described procedure. Remove your Signatures under Mail/Settings/Signatures. After this you will be able again to adjust your New Message or Reply-Window in width. After you have adjusted your New Message - Window, restart the Mail-App and write your Signatures back under Mail/Settings/Signatures. Now anything should work perfect. You can adjust any Windows in Mail, as it should be. If your Signature is to big, you can copy them into a file from the Textedit-App, change the Text over Format/Make Plain Text (with this step you remove hidden formats), then  change the text back over Format/Make Rich text and copy in the last step this Text back to your Signatures under Mail/Settings/Signatures. Close your settings, restart Mail. This procedure takes you only minutes. After this, it works for sure.
    Sorry for my bad English, but I hope you will understand what I intend to tell you.

  • Problem with iTunes. I have Windows 8 on a new laptop. Installed latest version of iTunes. Can play music in My Library but when I click on Itunes Store I get the message "iTunes has stopped working. A problem caused the program to stop working correctly.

    I have a new laptop with Windows 8 as operating system. Installed latest version of iTunes ontop computer. I can play music in My Library but when I click on iTunes, I get the message " iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is available."
    Anyone know what is the cause and if there is a resolution? Have tried to re-installing iTunes and have also tried restoring laptop to an earlier date.

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • Mail App stopped downloading new messages from Gmail

    I'm using MBP with OS X Lion.
    I've been using Mail App for my two Gmail accounts. I also use two different types of mail downloading systems (POP and IMAP) for them. For some reason, the speed of downloading new messages started slowing down a few weeks ago; however, I could still use it until today. Today, it seems like it is completely out.
    It just stopped downloading new messages completely.
    For the POP account, it says:
    There may be a problem with the mail server or network. Verify the settings for account “POP” or try again.
    The server returned the error: The connection to the server “pop.gmail.com” on port 995 timed out.
    For the IMAP account, it says:
    There may be a problem with the mail server or network. Verify the settings for account “IMAP” or try again.
    The server returned the error: The connection to the server “pop.gmail.com” on port 993 timed out.
    The weird part is that I can still send an email out of those accounts fine.
    I checked the settings for Gmail, and everything seemed just fine.
    I tried to re-do everything so deleted the IMAP account. Now it shows the message below:
    The Google IMAP server “imap.gmail.com” is not responding. Try checking the network connection, and that the server name is correct. Otherwise, the server might be temporarily unavailable. If you continue, you might not be able to receive messages.
    I tried Connection Doctor and it shows as below:
    I followed the suggestion by changing unchecking those boxes for SSL, but it didn't help either.
    I tried "Rebuild" under mail box menu bar but it also didn't do anything.
    Can anyone help me with this issue?
    Thank you in advance.

    By the way, my Mail App is version 5.3

  • How do I stop texts from coming to the new Messages app on my macbook?

    I was on my computer and wanted to try out the new Messages app so I opened it up, and wrote a message to my g/f and one to my friend. Now everytime they text me I get notifications on my macbook pro. I have clicked the X next to their name on the Messages app to delete the conversation from Messages but whenever they text me I still get pop ups on my macbook.
    I do know how to turn of notifications for the messages app completely but I don't want to do that.

    Hi,
    You could just disable the Account as has been said (Untick the "Enable this Account" box)
    You can remove the Apple ID
    GO to the Preferences > Accounts and the iMessages account
    Use the Account Detail Button
    Use the Sign Out button (Removes ID)
    Either or these will stop Messages logging in to the iMessages server and trying to Sync iMessages sent to your Apple ID.
    10:00 PM      Tuesday; September 11, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I have a brand new macbook pro that i was doing a data transfer from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again?

    i have a brand new macbook pro that i was doing a data transfer via firewire from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again? (this time il use time machine transfer)

    Just power off the machine(s). Shut them down. Migration Assistant gets 'stuck' sometimes - best way to migrate really isn't over Firewire, though it will certainly work, but with both machines hardwired via Ethernet to the same router. You can use a TM backup, too, of course, provided that it's recent. Which is the best? Your choice. I've done it both ways and have a preference for MA, but TM restore can be a bit faster and less quarrelsome.
    Clinton

  • HT5361 Why is that when I am composing a new message do I end up with multiple versions of my message I am composing up in my Google Trash mailbox?  How can I stop this from happening?

    Why is that when I am composing a new message do I end up with multiple versions of my message I am composing up in my Google Trash mailbox?  How can I stop this from happening?

    It was very hard to see what the box says because the message displays for less than one second. However, I was able to record it with my iphone and pause it until I got a shot of the message. The box says the following:
    "Do you want the application “java” to accept incoming network connections?
    Clicking deny may limit the application’s behavior. This setting can be changed in the Firewall pane of Security preferences."
    I did make some changes. I will see if it works.
    Thank you!!!

Maybe you are looking for

  • How do I set up my HP 7520 to print card stock off Avery 8859 design???

    Trying to print business cards after designing on Avery 8859 card stock design.  HP 7520 All in one will only print a test page of thumbnails of the business cards even though it shows the correct size, etc. for the 8859 paper.  How do I set the prin

  • Creation of additional fields in Infoset SQ02

    Hi Experts, I'm a FICO consultant trying to create a query. Requirement : Link RSEG Table to BKPF Table in the join condition Link: RSEG-BELNR concatenated with RSEG-GJAHR = BKPF-XBLNR Now I'm trying to create an additional field in SQ02 named MiroYe

  • Will the new GeForce 8800 make a difference for Final Cut Express?

    Planning to buy soon a new 24 inches iMac, I am wondering if the new GeForce 8800 graphic card will make a significative difference compared with the ATI 2600 Pro?

  • Emtpy check box  validation in javascript

    Friends I want to validate check boxes thru javascript,but I can do it if only one checkbox is there,but my requirement is to tell the page that it is alright even if one checkbox out of many is checked.Please tell me how to do it. Thanks MS <SCRIPT>

  • Auto commit transaction

    Hi, I am using BC4J with Struts to develop a web application. I want to auto commit whenever user creates new or update a record. I am doing following in XXXEditAction.java BC4JContext context = BC4JContext.getContext(request); context.getApplication