New Message Type from HRMD_A

Hi Pals,
      I have created a new Custom Z message type and included some custom segments (Custom infotypes).
      i have to write a BADI Implementations if you have any sample coding pls do send me.
      I do have done all configurations like bd64, we20, we30, we81, we82, we57, we59.
      do i need to populate custom segments of custom messagetype in BADI or its automatically populated ?
      pls reply me with helpfull solutions.
Thanks in Advance,
      Sensati

i think the note 191470 contains all relevant steps for Contracts as well

Similar Messages

Prevent new PO message type from being applied when changing an existing PO

I have created a new PO message type for EDI (ZED) which is working as required on new PO instances. Applied conditions are Doc Type, POrg and Vendor, with master data set accordingly.
My problem is when I enter an existing PO in ME22N, which has already been output under an NEU message, the system is applying my new ZED message type and I do not what it to do this.
Also note in Fine Tuned Message Control, I have not set ZED to reprint on changes.
Can anyone help please?
Kind regards,
Neil

This is resolved I didn't need a new message type and deleted ZED. All message outputs now controlled under message type NEU, with required access sequences to suit EDI and other communication types i.e. Print/E-Mail

Creation of New Message Type for Extended IDoc

Dear Friends,
I want to create New Message Type for MATMAS and want to Active Change Pointers accordingly. Thru this Message Type how can I able to use Extended IDoc which I have created for Basic Idoc Type MATMAS05.
I am Sending Data from SAP to XI ; Any one can help me in this How can I create the Message Type with the IDoc Extn .
for Change Pointers.
Warm Regards,
Naveen Mutyapu.

Hi naveen mutyapu,
see these links
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
http://www.allinterview.com/rss/interview-questions/new/SAP-ALE-IDocs.xml
happy learning.
thanks
karthik

How to change P.O. duplication message type from warning to error for Order

Hi Experts,
I have a requirment to change P.O. duplication message type from warning to error for Order only not OrderTemplate. I can easily change message type in BAdI ISA_BASKET_MSGS, but I can't find the parameter to know if it's Order or OrderTemplate (DocType). If this BAdI is not good way, is there other way? and how to please?
Please advise / help..
Thanks, Jin

Thanks Easwer for your help.
The info for getting status from function is very clear and I followed you instruction and completed the coding in BAdI and tested it successfully .... Thank you very much. I need to learn where I can see the system status of the template, i.e. I1034 (Order Template) or Order or Quotation .....? if I need to filter out Quotation, I can easily do it in the BAdI. Could you please provide me more details?
Thanks again, Jin
Thanks again, Jin

Display a new message type VL02N/03N

Hi masters, i have tried to create a new message type ZPL2 to display in the tx vl02n, but the message type is not visible in the "Issue Delivery Output", i create the message type in the transaction V/34, NACE i have configured this message type in the transaction vv22, but i dont get the form to use my new message type. can anyone help me with this? i have seen almost all the forums about this but i have not found an answer, in the attach images you can see my problem

Thanks Noel, this was the solution that i was looking for, i already can add the message type for an specific customer in the transaction VL02N->EXTRAS -> DELIVERY OTPUT ->HEADER, but i have to do this solution for an especific customer, there are any form that show the message type ZLP2 for all the Outbound Delivery with the Delivery Type ZLF1, or i have to do this always for each customer.
Thanks

Need help for new message type for PO archiving

Hello All
I have configured new message type ZARR for PO archiving process. After configuring all the steps this condition is not getting picked to by itself. And after maintaing it manually it is giving red flag without any error message. Here I am listing all the step that I have followed for config. Please help me am I missing something or any parameter is wrong.
Steps for new Message Type for PO Archiving
1.     Defined new Table 513 Purch.Org./Plant.
2.     Defined new access sequence Z513 Access Sequence for Archiving.
Following are parameters to the Access Sequence
Access Sequence Number = 21
Table = 513
Description = Purch.Org./Plant
Requirement = 101
Exclusive = Yes (box checked)
3.     Maintain Output Type ZARR for PO
General Data
Access Sequence = Z513
Access to condition (Checked)
Multiple Issuing (Checked)
Program = FM06AEND
FORM Routine = CHANGE_FLAG
Default Values
Dispatch Time = Send Immediately (when saving application)
Transmission Medium = Print Out
Storage System
Storage Mode = Archive Only
Document Type = ARCHIVE
Mail Title and texts
Language = EN
Title = Archiving for Legal Requirement
Processing Routines
Transmission Medium = 1 (Print Out)
Program = SAPFM06P
Form Routine = ENTRY_NEU
Form = ZJ_9H_MEDRUCK
Partner Roles
Medium = Print Out
Funct = VN
Name = Vendor
4.     Fine-Tuned Control: Purchase Order
Oprat. = 1
CType = ZARR
Name = Testing for Archivin
Short Text = New
Update Print Related Data = Yes (checked)
Oprat. = 2
CType = ZARR
Name = Testing for Archivin
Short Text = Change
Update Print Related Data = Yes (checked)
5.     Maintain Message Determination Schema: Purchase Order
Procedure RMBEF1
Step = 100
Cntr = 1
CTyp = ZARR
Description = Testing for Archivin
Requirement = 101
6.     Assign Schema to Purchase Order
Procedure RMBEF1
7.     Define Partner Roles for Purchase Order
Out. = ZARR
Med = 1 (Printout)
Funct = VN
Name = Testing for Archivin
Name = Vendor
8.     Test Condition Maintained in MN04 (Master Data)
Purch. Org. = 0001
Plant = 24
Partner Funct = VN
Medium = 1 (Printout)
Date/Time = 4 Send immediately (when saving application)
Output Device = HUL1
Storage Mode = Archiving only
Thanks
Ankit

the problem is the Exclusive = Yes indicator in the access sequence.
Your other message has this exclusive indicator as well.
so if the first message is found, then no other message wil be determined
to allow several messages in one PO, you must not set this exlusive indicator

New message type

hello,
Can anyone please tell how to add new message type using omt4 Tcode
Regards
Vijay Shukla

Hi Vijay,
As far as I understand, you can suppress, change it to warning message or error message, but you can not create new message with TX OMT4.
I hope this answer your question.
Thanks

Message type from Logical system

Dear All,
I need develop an inbound where the info is coming from HR system. I found Message Type HRMD_A can be utilized for the development, however im not so sure if the message type HRMD_A is originally exist in my R/3 4.7 or it was being distributed by the HR system previously via BD64.
Please comment on how can i check for it.
Below are the related info for Message type HRMD_A that i found in my R/3 4.7:
Message type - HRMD_A
Basic type - HRMD_A06 (for release 620)
Process code - HRMD
Inbound FM - IDOC_INPUT_HRMD
Thank you.

Hi Atish,
Thanks for your reply. Let me recap my scenario and please point me out if i'm wrong again.
For my case, Message type HRMD_A exist in both R/3 and HR system. Since it exist, then we do not need to distribute from HR again via BD64. Right?
IDOC can be passed from HR to R/3 without any additional config right? Assume partner profile and RFC destination has been configured correctly.
Please comment.

New Message type for Sales orders

Hi,
We have the message type is ORDSRP(ORDERS05) and Function module IDOC_OUTPUT_ORDRSP for the sales orders.
We have lot of custom fields to be added to the IDoc.
Can any one suggst if it is better extending the current message of create a new one.
Thanks.
Rohita.

Hi Rohita,
Instead of changing the standard domain, You have to make the changes in the User Exit.
Say Qualifier 001,002,003 were already there in the domain.
001--Purchase Date
002--Delivery Date
003--Ordered Date
In the user exit u have to just add the segment and the qualifier without making any changes to the Standard Domain.
These Qualifiers are just like other variables and u can add whatever values to them that u want..
You can add Qualifier 004 for Trnasportation Date or Goods issue date and have to communicate the MiddleWare informing that date with this Qualifier will be Transportation Date and they will do the mapping to the corresponding field in other syste.
You can have as many message types as u want for the same IDoc type. There is no harm in having multiple message type. And u dont need to change the standard domain. It can be done without changing the domain.
If u analyse the FM closely u will realise that they have done coding for those values in the domain.
So instead of adding it to domain u just have to do the coding for this new qualifier.
Revert back if u need any help on it.
Thanks...
Message was edited by:
Utsah Garg

IDOC Message type from XI

Hi,
I'm sending idoc type ORDERS05 from XI. Previously, I had set up message type ORDERS for this IDOC in the partner profile. But then I changed message type to ORDRSP, and process code ORDR for inbound idocs. I've also set message type ORDRSP for IDOC type ORDERS05 in WE82 message type - idoc type linking.
But for some reason, the IDoc is looking for message type ORDERS and not taking message type ORDERSP, and it is erroring in SAP, when I view the status of the IDoc it says that EDI Profile ORDERS Message type was not found.
So my question is - is this message type for an idoc type to be used passed somewhere from XI, do I have to make a change in XI side, or SAP side.

Hi,
I did all these changes, in the IDOC mapping in XI and also selected the option to select control record from payload in the idoc adapter. The messge in SXMB_MONI, I can see that EDI_DC40 has mestyp ORDRSP, but when I see SAP we02 IDOC transaction, it says that message type is ORDERS. Don't know why this is still happening? Any other option needs to be checked guys?
Regards,
Vijay
Message was edited by: vijay srikanth

Sending Message Type from the same Logical System to 2 different ports

Hi,
I need to transfer the same message type 'DEBMAS' in the same logical system,
to 2 differenet port - directly to XI (as an IDOC) and to function (as a PROXY),
In XI this are 2 different interfaces.
I see in we21 that when adding message type in outbound I can also write message code or message function so I tried adding an additional row of DEBMAS with message code but it did not work.
Thanks,
Naama

Hey,
This question should not be posted here, but in the XI forum,
anyways,you can do it in 2 ways
1) You can send the message to XI, and in XI it should be configured to send to
two different places, which can be done in the Receiver Communication Channel, one would be IDoc Receiver and another would be a SOAP Receiver. ( here you send one message to XI and XI will send it to the PROXY )
2) You can specify the settings in your Partner profile (we21)and while generating the Port (we20).
Regards,
Samson Rodrigues.

Adding a new message type to Report RHALEINI to send HR Master Data

I have extended Basic IDoc type HRMD_A07 with custom segments, and I want to send this vis report RHALEINI. PRoblem is I cannot see it in the Receiving System Message Type frop down list. IS it so that I must set up a Master Data Distribution Model with that message type before the report will show it in the list?
BR,
Tony.

Hi Tony,
I have the same question. Did you find a solution for this?
Thank you
Best regards
Christian

Cannot disable "New Message" window from popping up

Each time I click the Messages icon in my dock, immediately the "New Message" window pops up. However, I may not necessarily want to compose a new message; most of the time, I just want to view my buddy list to see who's online. It becomes rather annoying to have to close the "New Message" window every single time. Does anyone know how to disable this? Thanks in advance!

Hi,
It cannot be Disabled as such.
Click and Hold the DOCK icon and then choose "Show All Windows"
This then displays all the windows like when you Quit.
You can select the Messages window or Buddy list
The Message Window does not set up New Message this way.
You will notice in the DOCK menu that "New Message" is the default action.
11:00 PM Monday; August 6, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Outlook New Message Window from Javascript

Hi,
From a hyperlink, i can bring up a new mail message window by simply using the <mailto> tag.
What if i wanna do the same thing on click of a button....
onclick event can be handled in javascript but how can we invoke a tag from there ???

document.location="mailto:[email protected],[email protected]?cc=[email protected],[email protected]&bcc=[email protected]&subject=stuff";
mailto:ADDR[?[cc=ADDR][&bcc=ADDR][&subject=subject_text]]
where ADDR is a single email address or a comma-separated list of addresses.

Adding Standard Segment in New Message Type

Hi There,
In the standard Idoc type of delivery DELVRY05 , I am not getting pricing condition segments, These pricing condition segments are available in INVOIC02.
Could you please tell me the step by step approach for creating a customize idocs say ZDELVRY05, in which I can add segment E1EDK05 from INVOIC02.
While adding trying to add segment E1EDK05 in WE30 I am able to add the segment but fields are not appearing . Is it the right method of doing it ?
Please help
Manu

Hi Oscar..
Thanks for the reply. Could you please help me to know the step by step process for my requirement as I am very new to Idocs. when i create new 'Z' idoc type.. shall i take extension or basic..
in extension it is further giving me three options.
I appreciate your help in this regards
Manu

New Message Type from HRMD_A

Similar Messages

Maybe you are looking for