New micro with the headphone problem fi

I just orded a new Zen micro off of ebay. How can i tell if it is a newer one with the headphone problem fixed? If does not come with the ac charger or the belt clip. Does that tell anything about the age. Any other way to see when my micro was manufactured? When did the headphone problem start getting fixed?

Justinw wrote:
I just orded a new Zen micro off of ebay. How can i tell if it is a newer one with the headphone problem fixed? If does not come with the ac charger or the belt clip. Does that tell anything about the age. Any other way to see when my micro was manufactured? When did the headphone problem start getting fixed?
Im not sure that the creative people will honor my warranty, and I was wondering how much would it cost to have the jack problem fixed? It should be a recall, but I suppose that wont happen.

Similar Messages

  • 9 month old Zen Micro with the headphone jack problem

    So, I've been putting up with the headphone jack problem for a few months now, and i've finally decided to get it repaired or fixed. I emailed Creative a few months back and they told me to send it in. My question is, since I am out of warranty, will they repair the unit or send me a whole new one all together?
    thanks,
    mike

    Actually, I just sent in my 7-month old Micro in b/c of the headphone jack problem and they sent me a brand new shrink-wrapped one. They <EM>didn't </EM>charge me for anything. All I had to do was wait 2 weeks for them to send it back to me (grueling but doable) and pay about 2.44 for shipping the micro to them. So now I'd have three batteries if it weren't for the fact that one of them swelled up; I have NO IDEA how that happened. So yeah I guess the point of the post is that you don't get charged anything even if you're out of the 90-day labor warranty.

  • New Zen Micros and the headphone jack prob

    I unfortunately had one of the zen micros with the headphone jack that ceased to work. Has this flaw been fixed in the new ones?

    SSR wrote:
    The charge is likely to be expensi've, but as this is the second time it's failed and as the warranty has just ended try pursuing a repair under warranty with support.
    repair under warranty with support? how do i go about? im located in Singapore, any website or support number to call for Singapore side? thanks.

  • My ipod touch is having problems with the headphone jack when I rotate a little song stops

    my ipod touch is having problems with the headphone jack when I rotate a little song stops

    Hey Silverdemon, sounds like a short, most likely in the headphones. Try a different set of headphones with this iPod or try the headphones with a different device. If the problem stops with your iPod or it moves to another device, then replace the headphones. If within 1 year of date of purchase Apple will replace the headphones for  free if problem is a defect, not abuse. If the problem continues with a different set of headphones, check the port for damage and foreign debris. If you note debris, attempt to remove it, if damage noted contact Apple and set up an appointment to have it evaluated. if nothing appears wrong, try plugging / unplugging to jack about 12 times maybe corrosion on the contacts if so that should clean it. Next thing to try reset your iPod. After that try restore from backup. Last resort, restore to new. Just make sure you make a full backup to your computer before you restore so no data is lost. If nothing works, contact Apple and set up an appointment to have your iPod evaluated. Good luck, Cheers.

  • HT200169 Having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Sug

    Hello,having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Suggestions?

    Thanks, Ian. Yeah, that's how I do it now...or with the controls in the left side pane. Still, I would have liked that quick on-the-spot edit capability...especially while sketching.
    Ian Turner wrote:
    Sorry Mark, you are out of luck as it does not do that - it works the same as L8. The way I would achieve that with more accuracy and control would be to route all the tracks you want to fade to a Bus then use volume automation on the bus. To do this you will need to add a standard audio track, then re-assign it using (Control Click on the track header) to the Bus track. You can then automate volume/plugins etc on the Bus track.
    Ian

  • Problem with the headphone jack

    I was watching a movie with the headphones in, I put the computer to sleep, pulled the headphones out and put it away. Later that day I went to use it and noticed that the jack for the headphones was lit up red. Sound will NOT work without headphones in now.
    Please help!

    Hi Matteo,
    I take it you've checked the Audio output tab of your sound panel in Sys.Pref.
    Also maybe check the audio Midi Setup Utility in your Utilities folder.
    Am unsure of the red light thing - maybe someone else can help.

  • How do I get the sync of my 3GS on my computer to transfer everything (files, apps, etc.) to my new iphone4?  And then how do I move the sync to a newer computer so I can sync the new phone with the new computer?

    How do I get the sync of my 3GS on my computer to transfer everything (files, apps, etc.) to my new iphone4?  And then how do I move the sync to a newer computer so I can sync the new phone with the new computer?
    My 3GS is dying and it's synced to an older computer.  I have tons of datafiles as well as apps, music, text messages, etc. that I need to get moved to the new iphone4 I'm getting.  Then I need to move the sync to a newer computer so that I can sync the new phone and new computer.
    I understand how to get my apps to transfer to a new pc.  That's not the issue.  It's getting ALL the data from the 3GS to the 4 and then to a new computer.
    Thanks.

    Thanks much, that's very helpful for step one (getting old phone onto new phone).  Very clear. 
    However, I still have the problem of moving to the new computer.  How do I move the sync to the new computer after the new phone is set up?

  • Everytime i link my iphone up to my laptop the message 'welcome to your new iphone' with the option restore from back up or new iphone. i once did restore from back up and it deleted all my recent pictures, music etc. how can i get pass this stage?

    everytime i link my iphone up to my laptop the message 'welcome to your new iphone' with the option restore from back up or new iphone. i once did restore from back up and it deleted all my recent pictures, music etc. how can i get pass this stage?

    Hi Khuram1981 - thank you thank you thank you!  All sorted!  dont suppose you know how to fix another problem I have??? for weeks now, since updating to ios5 I think, for some reason every time I have tried to log onto app store it says CANNOT CONNECT TO ITUNES STORE.  It's nothing to do with my computer, and I've been to the Geniius bar but they couldnt help and nothing I seem to do lets me update my Apps and even worse, I cant even buy any more.  Any suggestions?
    Again thank you SO much for helping with other problem = a real relief.
    Chatterwind xx

  • The new Update with the Patch for Camera Raw is not working. Code U44M1P34

    Hi there,
    i have a problem with the new CC Update - including the patch for Camera Raw 8.7.1
    Error Code: U44M1P34
    Photoshop CC (2014)
    After Effects CC (2014)
    Brisge CC
    The logfile shows 1 fatal error:
    FATAL: Payload 'Photoshop Camera Raw 8_8.7_AdobeCameraRaw8.0All 8.0.0.22 with a number following.
    I have tried to uninstall an reinstall. Did not work at all, because the same Problem is shown.
    I did not install in other folders. All other updates worked - but not this update. The problem seems to bee only caused by the Camera Raw Update.
    Are there others with the same Problem? Any ideas?
    Thanks in advance and Greetings,
    Joerg

    Hi Jeff,
    it seems that i have found a dirty, but working solution for my problem on this site: Getting fatal Exit Code 34 when installing an app
    To change these 3 folder names and reinstalling of my Programs worked fine without any errors:
    Adobe PCD -> Adobe PCDold
    backup -> backupold
    caps -> capsold
    Now the Programs are on the actual status with all updates included and everythings seems to be fine.

  • Why does FF save files to desktop, when I have "downloads" checked in options? This is a new issue with the latest version 3.6.3 Windows XP Thanks.

    Why does FF save files to desktop, when I have "downloads" checked in options? This is a new issue with the latest version 3.6.3 . Using Windows XP Driving me nuttier! Thanks.
    (Is is that MicroNetFrame Asst thing?)
    == This happened ==
    Every time Firefox opened
    == When I installed latest version

    Thanks for your reply. I appreciate your help.
    It was just a hunch that MircoNetFrame was causing the problem. I disabled it as you suggested, and I still have the problem.
    I just changed under Tools>Options> General - had checked "ask me every time" under downloads, so instead of asking me, FF saved the download to I know not where. It no longer saves it to the desktop, leaving a duplicate in "my documents".
    In windows, I have found unless one knows the entire name of the document, one can never find anything. It isn't listed under recent ''''''__. I can't recall the nomenclature, but the
    capability is ridiculous. So, I don't know where that file I just downloaded is!
    I downloaded a PDF file, but this happens with all DL's. It was so easy to have them all stacked in one place and I could recall
    what I had and when I downloaded it easily.
    Do you have any other suggestions other that going back to the old version of FF, which I would rather not do?
    Thanks again for your time, it is very considerate to help a complete stranger, I must say. Sounds like something I might do! Cheers!

  • I have changed settings on my email account with my provider, but in order to activate the address they instructed me to delete my account and add a new account with the same email address. Will this delete my all my email history? Any advise please?

    I have an OS X 10.6.8 and have had problems with my mail. I have changed my account settings with my mail provider, but they suggest I now delete my account and add a new account with the same email address. Will this delete my email history? Can anyone please advise?

    I have the same problem as the emails go to my iCloud account that I cannot access!!! I cannot answer the security questions as someone else must have set up my iCloud account. Nothing seems to work. It would be great if someone has some ideas as what can be done to recover the situation?

  • MBPro 17 Intel Core 2 Duo Audio only works with the headphones?

    MBPro 17 Intel Core 2 Duo Audio only works with the headphones?
    There is a red light constantly emitting from the headphone socket?
    I can not listen to sound unless headphones are plugged in - when taken out I get a red light and the volume controls kets seem locked?
    Please help!
    Julian

    Hi Kitty.
    Seems to be quite a popular problem. In another post, I posted the following.
    "The red light is the data signal that is transmitted if you plug in an Optical Audio device such as surround sound speakers. I had the same problem for a short while with my 17' MBP. Sound was working fine from my built in speakers but I plugged in some earphones to listen to something that I did not want the rest of the office to hear and after pulling the hearphones out, the optical signal (red light) was being transmitted. The switch Cessna is referring to is the switch that is triggered inside the port that tells OSX that earphones/optical audio device is plugged in and to shut down power to the built in speakers. When the device is un-plugged from that port, the switch should get triggered again and power up the built in speakers and disable the optical light signal. Perhaps there is the slightest defect on the earphones you are plugging in that are preventing it from triggering the switch when the earphones are un-plugged.
    Try a different sent of earphones to maybe trigger the switch if you are uncomfortable with the paper clip solution."
    That seemed to solve the problem for that user.
    The link to the post is http://discussions.apple.com/thread.jspa?threadID=895286&tstart=30
    Good luck

  • Can I set up a 5.1 surround with the headphone output?

    Can I set up a 5.1 surround with the headphone output? I've got everything connected to the headphone output but it doens't seem to work very well.
    This question was solved.
    View Solution.

    Great Question!
    The output on the notebook is 2.0 unless specified.
     Most 5.1 headphones make a virual surround sound experience unless they require multiple mini jack inputs, optical, or coaxal.
    The only way to experience true 5.1 on a notebook is to have an internal 5.1 card (which is not included in current HP notebooks) or purchase an external to plug in (USB or ExpressCard).
    I am an HP employee.
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

  • Does the HP ENVY 14 Beats still come with the headphones?

    I heard on some sites that they discontinued the headphones.
    Do they still come with the headphones, free?

    Not all Beats edition notebooks come with headphones bundle...Here below is list of models that comes with headphones...
    14-1160SE
    14-1155CA
    14-1161SE
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • 8Gb Touch 2nd gen problem. Only showing connect to iTunes screen and not letting me past that as I have a password - Already reset and it just loops back to the same screen with the same problem

    I have an iPod Touch 8GB 2nd gen and it's only showing connect to iTunes screen and not letting me past that as I have a password - Already reset and it just loops back to the same screen with the same problem.
    Any idea what I can do to fix this?

    you can connect the iPod to iTunes in recovery mode:
    Hold down the Home button and the Power button simutaneously, until the screen goes black and the device turns off.
    Now let go of the Power button, but continue to hold the Home button. Your iPod Touch/iPhone should have turned off and the screen should not be on.
    After around ~10-20 seconds, you will hear a noise (beep/ding) from your CPU as if it had just recognized a new hardware device
    and restore it to default settings, in order to remove your password (or just remove your password directly from the iPod touch, in order to sync with iTunes)

Maybe you are looking for

  • Purpose of Data Template

    What is the purpose of Data Templates in BI Publisher? I understand their format, creating one, and uploading it into BI Publisher Enterprise, our current environment, but I am trying to see what value and power they provide. Is it the lexical refere

  • HT5103 Final Cut X Trial

    Hi, I was editing using the Final Cut X Trial on my MAC, then it ran past it 30 day trial, so I saved the edit file on my harddrive and tried to open the project on a different computer with Final Cut X trial installed on it, but it wont open. Do any

  • How to write UDL file in Labview for Database connection

    Hi I am using SQL Server database. I am making connection with SQL by using UDL file. If I create  Normal UDL file in windows and make connection it happens.  I want to change or add some parameter Like database name. If I am changing this value by u

  • Cannot Close Tabs in Minefield That's Running Flash

    Just wanted to report a bug I've been noticing.  I'm using Minefield (64-bit) prerelease 4.0b7pre and when I have a tab open that has 64-bit flash running in it, I cannot close the tab anymore.  I need to close the entire browser instead.  This is re

  • Cisco Prime Infrastructure 1.4 SNMP Traps are not converted into Alarms

    Hi everybody, I just configured SNMP Traps on a Cisco Catalyst 3750-x to send to our Cisco Prime Infrastructure 1.4 Appliance. Now I forced the Switch to send some traps (Power off a Power Supply, Interface errdisable). The only events I see in Alarm