New mobo(z87) new cpu, no video output n560GTx ti hawk

Hello everyone
I installed a new mobo and cpu yesterday, now my GPU suddenly doesn't work anymore.
The installed mobo is an Asus z87-DELUXE, the CPU is an Intel i7 4770k.
The GPU is a MSI N560GTX-TI Hawk, the board goes in 00AE (Legacy boot mode) mode, after a minute of being in 00AE the board goes to 00A0 which is the normal state. The screen stays black and nothing happens I cannot go to bios. The VGA_LED turns on red and stays red, this means that there is a problem there (according by the book).
All LEDS are running on my GPU and the fans are running aswel, when I put in my older MSI n9500GT it does work (this one only uses one lane + no external psu connection). The onboard graphics work aswel.
I tried putting my graphics priority to PCIE, then it worked once but after that not anymore again.
The drivers have been updated, my HDD has been wiped and a fresh copy of windows 7 x64 is installed, the bios has been updated aswel to the newest version.
When I try to use my N560GTX to test my changes and put in my N9500GT again after noticing nothing changed, I get a system repair request of windows, I tried this repair twice but now it says it can't change anything on it's own.
Have I missed anything or is my GPU dead?
My setup:
Corsair Obsidian 650d
Coolermaster GX 650W Bronze+
Asus Z87-DELUXE
Intel i7 4770k @Std clock speed - Cooled by Mugen4 PCGH Edition
Corsair Vengeance 2x4GB DDR3 1600MHz LP
MSI N560GTX-Ti HAWK
Seagate Barracuda 500GB 7200RPM
1 Optical drive, no other drives
Thx in regards
Jonas

Well, you'd need to test the vga in another system to be sure. Could very well be a compatibility issue with your new board. Make sure it is running at the latest bios version.

Similar Messages

New install, No video output to monitor when booting

Brand new
MOBO,
EVGA 280GTX,
Corsair 850W power supply.
I plugged my power SLI power supply into vid card...do I still need to plug in a molex into the MOBO?

yes

How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder which does not have firewire out/input? it comes only with a component video output, USB, HDMI and composite RCA output?

I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
Thanx

I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera... is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
thanx

TV (video) output from new nano looks very good!

Just a comment for those who may be wondering how the video quality on the new iPod nano looks when output to a TV. I have one of the old iPod AV docks with the s-video port and the new nano seems to work fine with that combination (using a standard s-video cable between the dock and the TV). Thus far I'm really impressed with the video quality, I can't see a single problem, the color is good, the quality and sharpness is as good as I've seen from any iTunes Store content, and as far as I can tell the frame rate is fine (no stuttering, skipped frames, or problems with audio sync). I'm amazed that such high quality video can come from such a small device. If it continues to look this good (after viewing more content and after more testing) then I think Apple may have "hit one out of the park." This thing could turn out to be the most popular iPod yet (if you have any interested in video and still want a small device).

I just found out that the video out (TV) on the new nano supports video playlists so you can create playlists for back-to-back display on the TV. Not even the AppleTV will do that (even though the latter has been a highly requested feature for the AppleTV since day one). In fact, if you can do without the on-TV menus you may find that the nano is a better video output device than is the AppleTV (that is, the menus system on the nano doesn't appear on the TV output).
Also, I just competed a few hours of video playback to my big-screen TV from the nano and I'm still impressed. No video problems at all, looks very good considering the quality limitation from the content that is currently on the iTunes Store (limited to standard definition, no HD movies, HD TV, or HD music videos as yet).

My new (2 weeks old) Macbook Pro, wont send video output signal to beamer... What can I do? I have the adapter to vga but it does not work...

Hi, I have a new MacBook Pro and I dont get video output to a beamer although I have the regular
Mini DisplayPort to VGA Adapter and it works fine with my older MacBook...
Thanks a lot for your tips...

That should work. When you first hook it up it will probably have the display set in Extended Desktop mode. The Menu Bar and Dock will be on the MacBook display and your background screen on the TV but you can move the cursor onto the TV screen.
In SystemPreferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.
If you also want audio you'll need audio cables to the TV using a 3.5mm stereo headphone jack to RCA sound plugs. You attach it from the headphone jack of your MacBook to the appropriate input plugs on your TV http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13#/ref=nb_sb_ss_i_2_19?url=search-alias%3Daps&field-keywords=macboo k+audio+cable&sprefix=macbook+audio+cable&rh=i%3Aaps%2Ck%3Amacbook+audio+cable

Video Output for Musical on new Macbook Air

Doing first production of a musical.
I'm thinking of buying Logic Pro 9 to control the output of recorded audio and video for the show (as well as to compose a few extra pieces).
The features page on the Apple site says: Logic can let you view synchronized QuickTime movies on a separate monitor using output options like Digital Cinema Desktop.
http://www.apple.com/logicpro/top-features/
The Tech Specs page on the Apple site says: External video output via FireWire or DVCPRO HD.
http://www.apple.com/se/logicpro/specs/
I've bought a brand spanking new Macbook Air which has a Thunderbolt and two USB ports.
Would I be able to use Logic on my Macbook Air to output my video? (I was thinking I would do it to a projector either through WiFi or a (yellow) composite cable.)
(The alternative I was thinking of was to use MuseScore to enter the notation for the extra pieces. Garageband for the audio output (it's missing a few instruments [e.g. clarinet, xylophone]) and plain old Quicktime for the video output.
Thanks!
John
(I've already spent way more than I can afford.)

OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

4 D-lights on all the time, Brand new CPU & MOBO today!!!!!

Hi all newbie here, i have been lurking here for a while, which helped me make my mind up what board to get. I just didnt think i would be posting this soon
I hope somebody here can help me, im well pissed off!!
I have just built my system after buying new CPU & MOBO (see below) today, i goto turn it on and all i get is:
4 D-Bracket lights on permanently and the CPU fan spinning but nothing else.
I have tried removing CPU 5 times now and i have used just 1 stick of ram at a time in DIMM 1 but still nothing.
Has anybody got any clues?
Thanks
Smokey

Quote
i have been lurking here for a while
...always a good idea to research...first...
Quote
+12V 10A
...you're killing me...HAAAAAAAAAAAAAAA!!!

K8N Neo4/SLI - New CPU: Athlon 64 X2 3800+ OR AMD Athlon 64 4000+

I want a new CPU ... Which of these will make a bigger difference over my current Athlon 64 3000+
Or would someone please suggest a better CPU (under ~$90). TIA!

Thanks for the help! I use the system for some gaming, media "server", burning DVDs, and usenet mostly. But the biggest reason why I want to upgrade is that I run TVersity http://www.tversity.com/home (software to stream any video through an XBox 360 to your home theatre). Because the XBox 360 will only play .wmv files without 3rd party software (TVersity). TVersity requires a powerhouse computer because it converts (on the fly) any video extension to .wmv and streams it out to the XBox 360. If the PC isn't powerful enough the video stutters and the audio skips.

How can I configure my new Mac Pro to output the timeline via HDMI

How can I configure my new Mac Pro to output the timeline in FCP 7 (yes, I have X, but I'm using 7 right now). I have two monitors running from TB2, but want to have the third for a client monitor.
If I use all three via TB2, it's literally three monitors, and I want to edit on my CineDisplay. I only want the client to see the timeline video on the third monitor. When I hook up HDMI I get no signal, in fact, I can't have the HDMI cable hooked up for TB2 to work with the third.
Thanks,
GEvans
DarthPro
3.7 QCIntelXeonE5
12 GB
AMD FirePro dual D300 2048MB
OSX 10.9.2

If you use all ThunderBolt displays, or stick with DisplayPort and Mini DisplayPort (free conversion between the two with only a cheap cable) you can have up to six displays.
If you attach "legacy" displays with "any-old adapter", you can have up to two, and the built-in HDMI counts as one if you use it.
Any more requires ACTIVE Adapters.
The US$100 Apple ACTIVE Mini DisplayPort to Dual-Link DVI adapter works in every case, even displays over 1920 wide.
StarTech and Accell make US$35 ACTIVE adpters that work for displays up to 1920 wide.

Will the new W540 laptop support output to dual monitors?

I am doing some research on the new W540 laptop and noticed that it doesn't have any other video output other than a 14pin monitor out and a thundrebolt port. We would like to be able to use dual 30" 2560x1600 monitors. Any info would be great. I don't even know if the older laptop docks with this laptop. The dock has multiple monitor outpots so I thing they would work but I need to know before making a purchase decision.
Mike
Moderator Note; thread moved to here from ThinkStation

Probably not the right forum, but going to the W540 page on the Lenovo site and then clicking accessories brought up a blurb about the ThinkPad Pro dock, which included the following:
DisplayPort connector, DVI-D connector, VGA monitor port, and a Kensington security lock slot.
*ThinkPad Pro Dock works with the 2013 classic ThinkPad models, including L Series, W Series, X240, T440p, T540p, and T440 without NVIDIA® Optimus™ technology.

TS1362 just purchased new cpu ,windows 8 recieved new updates and now I Tunes not play when play button hit.nothing happens??Rsvp please .time is fleeting:)

just purchased new cpu ,windows 8 recieved new updates and now I Tunes not play when play button hit.nothing happens??Rsvp please .time is fleeting:)

RealPlayer can cause conflicts with Flash Player because it tries to assign EVERY TYPE of video or audio file to itself by default. I haven't used RealPlayer in years for that reason. It's an unnecessary program anymore. There are apps loike VLC media player that cna do EVERYTHING it does without conflicting with other apps like Flash Player.
With WIndows 8, Microsoft began embedding FlashPlayer themselves into Internet Explorer. Because of that, you cannot download and install it from here. You cannot uninstall it from Internet Explorer without removing a specific Windows Update first. And you cannot update it via this website. ONLY through Windows Update can Flash Player for Internet Explorer be updated.
That said, you probably DON'T have a virus that's causing the problems with Flash Player and Internet Explorer. Many, many websites are not "recognizing" the browser.
This is a known problem with Internet Explorer 11, which Microsoft has been aware of since October 18 when they released IE11 The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player.
So far, Microsoft has made NO indication that they have any plan to fix it soon.
Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

MacPro early 2007 - can It be upgraded with a new CPU?

MacPro early 2007 - can It be upgraded with a new CPU?

okay, jakwapnter, that's a great question. You made my day on that one.
No-the Genius Bar would probably Not do that-they only really handle current stuff, and neither your mac Pro or mine (2008) are considered current enough
However, if you could find a local independent Mac repair person willing to tackle it....it might be possible. If you're courageous and confident enough, and you feel that you pretty much know what you're doing, then maybe even you could do it. you might want to find some "how-to" videos first, though, and ask questions and learn stuff.. It ought to work, but not having done it myself I can't make any promises either way.
As for it being worthwhile, that's a crapshoot. If you do it successfully, you would get a bit more life out of your mac pro, but you still wouldn't be able to run
current stuff. if you have Lion on there now, maybe Snow Leopard, then that's it. Check around your local town and see if there are any used Mac Pro towers for sale. By buying a new Mac Pro tower you would be perhaps able to better run the more current stuff, but, as a guess, might cost you around $3,000. I guess you might have an original "Quad Core" (2 dual core chips) , so anything from 2008 on up should be faster, and you can be sure that it'll work. It's kinda like putting a 6 cylinder engine in an old Honda civic, yeah, it might go faster, but it's still an old Honda civic, so to say.
the ball's in your your court, I guess
good luck
John b

Advice on new PC for video editing

Hi!
I'm building new PC for video editing (Adobe CS6). System is based on Videoguys DIY9 recomendations (http://www.videoguys.com/Guide/E/Videoguys+DIY9+Its+Time+for+Sandy+Bridge+E/0xe9b142f408a2 b03ab88144a434e88de7.aspx) with few changes:
CPU: Intel Core i7-3930K 3.2GHz
MB: ASUS P9X79 PRO
RAM: Corsair Vengeance Red 16GB (4x4GB) DDR3-2133
Video: ASUS GTX 570 DCII 1280MB GDDR5 DP
HDD: Corsair Force 3 90GB SATA3 550/500MBs (system disk)
Seagate Barracuda 1TB SATA3 7200RPM 64MB (scratch disk)
PSU: CORSAIR AX850 80+ GOLD
DVD: ASUS 12D1S BD-R
Case: ANTEC P280
OS: Win7 Pro OEM
RAID: G-SPEED eS (RAID 5)
Any thoughts & suggestions on such configuration?
Thank you in advance!

I made last updates to PC configuration (updates - bold) and soon going to buy. So... maybe final check:
CPU: Intel Core i7-3930K 3.2GHz
Cooler: Corsair Hydro H70
MB: Asus P9X79 PRO
RAM: Corsair Vengeance Black 16GB (4x4GB) DDR3-1600 CL9 1.35V XMP1.3
Video: Asus GTX670-DC2-2GD5
HDD: Samsung 830 Series 128GB SATA3 520/320MBs (system disk)
2 x Seagate Barracuda 2TB SATA3 7200RPM 64MB (scratch/cache/render disk) *
PSU: CORSAIR AX850 80+ GOLD
DVD: LiteOn BD-RE iHBS212-32
Case: ANTEC P280
OS: Win7 Pro OEM
RAID: G-SPEED eS (RAID 5, projects/media)
* Due to a limited budget, at the beginning I'll use HDD's in non-RAID configuration or will build RAID0 based on MB RAID controller

When I plug in my iPod touch 4G it keeps saying no new pictures of videos are found and it wont let me upload anything,what does this mean?

When I plug in my Ipod touch 4G to my computer, this thing pops up saying no new pictures of videos can be found. How can I fix this? I want to upload my pictures and videos, I need help!!

iOS: Importing personal photos and videos from iOS devices to your computer
Are there photos/videos in your iPod's Camera Roll album?
Also try go to My Computer>iPod>DCIM folder

HT201302 When I am trying to import pictures from my iphone to PC, I get the message'No new pictures of videos were found on this device'. There are lots of pictures which i can see on the iphone. I have a 4S. Is there a way to get around that?

When I am trying to import pictures from my iphone to PC, I get the message'No new pictures of videos were found on this device'. There are lots of pictures which i can see on the iphone. I have a 4S. Is there a way to get around that?

It sounds like you are using an application to import. You can do it manually.
Start > Computer (on the right) > scroll to the bottom and you will see your iPhone under Portable Devices > Open it and you will see a Drive, open that and there will be a DCIM folder. That is where your photos will be (There may be other folders each holding photos).

New mobo(z87) new cpu, no video output n560GTx ti hawk

Similar Messages

Maybe you are looking for