New Modded BIOS for K7N2 Delta ILSR

MSI K7N2 Delta ILSR Modded BIOS based on Official v. 7.80 BIOS
download here:

 Description: Access through interface which is on insecure interfaces list detected. Request aborted.
Interface/Client IP address:
 Date: Wed, 18 May 2005 13:11:17 GMT
Doesn't work for me 
By the way did u put the bios to vork with 1.3 vcore like the braziliantech one that does't exist anymore ?
EDIT: Thanks it's working now 

Similar Messages

  • AGP Setup For k7n2 delta ilsr

    I have a k7n2 delta ilsr mb, in display properties on desk top setting tab then advanced button then GeForce tab under adapter information is Bus and memory. To the right of Bus it reads AGP (PCI mode) shouldn't that read AGP (8X), how can I change this. Ron.

    Hi,
    No, leave it at 64 or 128.
    Go here for an explanation:
    http://www.rojakpot.com/default.aspx?location=7&var1=18
    Then - Click on:  "Free Access To the BIOS Optimization Guide" near the bottom of the page - then click on "AGP Aperture Size"
    Axel  

  • Need help with jumper settings for k7n2 delta ilsr

    I have a k7n2 delta ilsr and I'm using a AMD 2800+ barton 333 fsb. I'm not sure what the jumper settins are for this cpu. The users guide only shows 133/166 and 200, can anyone help me with the jumper settings.
    Thanks, Ron.

    Hi,
    As your processor is 333FSB - the jumper should be set to 166FSB as should the BIOS. As your RAM CPU combination runs at 2x166=333 or thereabouts.
    Basically, as a general rule, if you halve the FSB speed of your processor you'll get the setting for both BIOS and Jumper. 200FSB=100, 266FSB=133, 333FSB=166 etc. etc.
    Axel  

  • Temperature reading for K7N2 Delta ILSR

    I have a 2500+ Barton (333 FSB) to work with K7N2 Delta ILSR and 2x256 MB Samsung DDRAM(400 FSB).I use MBM to read my CPU temperatures.Usually 45-47 C idle and 54-58 C under full load.I overclock CPU to 400 FSB and I get LOWER TEMPERATURES!!!!!
     I use 1:1 bios setting for CPU and DRAM speeds either 333 or 400 FSB.
     How can this by possible?

    I use Speedfan which seems to follow the temp in the bios. I've heard that MBM is also accurate. As far as your temps going down on a OC that is very odd indeed.  

  • FLASH BIOS MSI K7N2 Delta-ILSR ????????

    I am trying to flash the BIOS of my K7N2 Delta-ILSR board. I follwed all the instructions from the MSI Web but I can't get it going. I booted from Win ME & Win98 but could not get into C: drive. So I used Command Prompt from Window to get  into the C: drive and follwed the Flash Bios Procedures. I keep getting the message: AwdFlash No Support WinNT/2000/XP OS
    I got problem with the temp after I updated the BIOS. I wanted to flash it back to the old Bios. Please help me out
    Thank you
    My system:
    WinXP Pro
    MSI K7N2 Delta-ILSR
    AMD 2500+
    1 GB DR3200
    Seagate 160 SATA

    http://www.msi.com.tw/html/support/bios/note/ntfs.htm

  • Kingston HyperX Memory for K7N2 Delta-ILSR

    Hey will my K7N2 Delta-ILSR support the Kingston HyperX serises DDR400-512MB Ram?
    Im looking to buy 2 maybe 3 of these and really want to be sure theyll work.
    http://www.ec.kingston.com/shop/partsinfo.asp?ktcpartno=KHX3200A/256&promo=hx2shp
    I checked the supported ram list for the K7N2 Delta-ILSR  and they wernt on there so i just figured it may be out of date?
    So thanx in Advance for info!
    p.s. It will support 3x 512MB right?

    Has anyone noticed how the Hyper X went from the poor-man's Corsair to being priced equal to OCZ, and usually higher then Geil, as well as usually being very close to Corsair, if not the same? I think only Mushkin beats it out now price-wise...

  • Case Recommendation for K7N2 Delta-ILSR

    Greetings,
    I'm looking for a mid size ATX case that that has the front usb etc. ports prewired as to work easily with a K7N2 Delta-ILSR mb.  By that I mean I don't have to plug each wire individually (with names that don't match) just a plug that goes on the mb.  My eyesight isn't as sharp so hooking up those one wire at a time is tediuous.  Not to mention the lack of starndards   Does anyone know if this is address on the next rev of mb's (with pcix etc).
    Thanks

    Brazos,
    I have yet to see a case that has all the USB wires together, they are all 1 pin at a time. You will find the Antec line of cases very good. (You can always use a magnifying glass to see the pins.) The pin names on the Antec cases are standardized and easy to figure out.
    If you want a good case at a cheap price, then go with the SLK3700AMB:
    If you want a good high end case, then go with the Sonata:
    If weight is an issue, then go with the Super Lanboy:
    Take Care,
    Richard

  • Warranty Length for K7N2 Delta-ILSR

    What is the mfg's warranty length on the K7N2 Delta-ILSR?
    I filled out the online support form earlier today but no response as of yet, and me being the impatient rascal I am, I didn't want to wonder all weekend. I bought it October, 2003 and the floppy drive controller seems to have gone out.
    Thanks!
    HH

    Thank you, Glenn!
    Looks like mine is 2 yrs. & 4 months old. Kind of stinks that I lost 5 months on the warranty by going by the mfg. date instead of date of purchase. Its not worth the hassle & would even cost more to RMA it for the controller. Ahh, but this is IT, the "World of Workarounds". I'll live!
    Thanks for your time, Glenn! 
    HH

  • Anyone help - need I/O plate for K7N2 Delta ILSR??

    I'm based in the UK but will pay P&P worldwide........
    cheers
    D.

    Good luck!
    http://search.stores.ebay.com/ws/search/StoreItemSearch?catref=C5&fcl=3&from=R7&frpp=50&fsoo=1&fsop=1&sacat=-1&satitle=k7n2+delta+ilsr&sbrexp=WD1S&sif=1&sofindtype=0&sofp=4&ssPageName=WD1S
    Edit: If applicable:
    http://www.mycableshop.com/sku/ATXBACKPLATE.htm

  • Bios for K7n2 delta 2 LSR (2800+ Mobile Barton Recognizing)

    Hi, i need the BIOS for the Bios for MSI K7n2 delta 2 LSR Motherboard, because i have a Mobile Barton 2800+ CPU with FSB 266 and it isn't recognized correct, i would like to set the Multiplier to 16, the highest setting is 13 - but at 13 my system didnt boot anymore. I tried the B72 Bios, but it didn't help. Thanks

    What's that? You already asked for that in another thread (https://forum-en.msi.com/index.php?topic=123557.msg932826#msg932826). Please don't open various threads for the same issue.
    I already said in the other thread you can't set 16 manually. Set it to auto.

  • Linux for K7N2 Delta-ILSR

    Hello,
    Does anyone know of with Linux distro is compatible with the K7N2 Delta Series?
    Sincerely, Deft

    Knoppix worked too, even my TvTuner worked.
    Not that I would recommend Knoppix as a solution, I was just playing.
    There is a lot more support for the nvidia kit now.

  • Replacement Chipset/Heatsink Fan (northbridge? for k7n2 delta-ilsr)

       < i need a replacement heatsink and fan for this fan.  that will fit!          Reason: I want a new one that is quiter, and the original fan in it broke.  I also need to be able to buy these part(s) online.

    Me too. You can get them in copper or aluminium. I have the latter, and for more than year now it's been doing a fine job with minimum noise.
    Check it out here:
    http://www.pcabusers.com/reviews/iceberg/p1.html

  • Best agp card for k7n2 delta ilsr

    Hi again folks
    I'm thinking of upgrading my graphics card as although this card has never let me down its the oldest component in my box, I would like to get something in the sub £100 range, I dont do games but may wish to in future, mainly it would be for photo apps/running-backup-watching dvd's etc. any info would be greatly appreciated tia Hazzo

    I notice your talking in £'s so I assume your located in the UK. 
    Have a look around overclockers.co.uk
    For a sub £100 I noticed a good offer:
    HIS ATI Radeon 9800 Pro - £82
    Also, the 6600GT here is only £103.24 (£106 inc delivery), altough only 4 left in stock so buy now if you want one 

  • 7.5 and 5.5 BIOS for K7N2 DELTA released

    Just enter this link:
    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=436

    Extended test ended up going back to 193x11.5 (2222)
    Crashed in looping of demo 3Dmark2001SE after 45 mins.
    Noticed my Nostromo game pad not being reconized , lights stayed on(not good)USB
    Backed up fsb a couple notches to stable again. All is good
    passing all extended test.
    gained 1 fsb from 192 to 193. I'll still take it.
    keeping low Volts
    CPU 1.7
    Dram 2.6
    Aggressive memory timings 2-2-2-6
    Sis Sandra still showing above stock 3200 400fsb speeds in benches
    Memory Bandwidth  2913
                      2733
    Arithmetic        8125
    Temps:
          System   33C
          CPU      36C
          Power    35C  ( all after benching)

  • K7N2 Delta-ILSR Agp conflicts

    hi all
    just regestard NEW BEE
    just got k7n2 delta-ilsr
    got all set up BUT, i had to use old graphics card to install Xp pro then put my primary graphics card in (phrophet 4500 64mb) in started up system and in devices of motherboard the pci to agp recources were all full up and dont work so the graphics card doesnt work, any ideas ??????
    ps I'll have to get uptodate driver for graphics card.

    Hi,
    Killy your score's not bad at all!   I'm more used to 3D Mark2001SE scores but yours seem very reasonable. I get about 1,600 on 3DMark03 and I run most recent (3D games) without problem (a little slowing down here and there) but your score is nearly 3 times mine! - Quite respectable!  
    Axel  

Maybe you are looking for

  • My 24" iMac display suddenly shows blank screen with funny pattern

    My 24" iMac display suddenly shows blank screen with funny pattern after bootup. Anyone know the cause? http://twitpic.com/51hih7 http://twitpic.com/51hihw http://twitpic.com/51hiiv

  • Where can I get an old version of Pages for Lion?

    Does anyone know how I can get Pages for Lion, os x 10.7.5. Upgrade is not possible

  • 9i default TNS/DB in formsweb.cfg

    I can't seem to make any use of "userid" work on the iAS middletier. It's as if I can't override the basic userid setting: I can't do it in a named config and I can't do it if I put it in the URL. No matter what I do I'm forced to enter username, pas

  • Need help with getStyleDeclaration

    Hi, I'm trying to move my Flex 3 project to new Flash Builder environ. I've a class named "CanvasButtonAccordionHeader" which is extended from an mx:Button instance. There was a code as: var selector:CSSStyleDeclaration = StyleManager.getStyleDeclara

  • Time Table for File Vault 2 FIPS-140-2 Certification

    I believe I read something that Lion/File Vault 2 encryption was submitted to NIST for FIPS-140-2 certification.   I know that IOS 5 is first to be certified, but does anyone know the time table for Lion/File Vault 2 to be certified?     I was told a