New modem, can't reconnect printer and computers wirelessly

Just replaced an old modem/router with new one. Now I can't get my laptop and desktop to connect with my old printer wirelessly.
MAC computers .. HP Office Jet 7210Xi

Tell me more. Is the printer connected to one of the Macs with USB and you are using Printer sharing? What version of OS X on the Macs? What router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

I have an iPhone 4S. When I try to print pictures, from my Windows computer, it doesn't work. Open Office also gives me an "unknown graphic" message. These are JPEGs, aren't they? Why can't I print and what is the unknown graphic?

I have an iPhone 4S. When I try to print pictures, from my Windows computer, it doesn't work. Open Office also gives me an "unknown graphic" message. These are JPEGs, aren't they? Why can't I print and what is the unknown graphic?

Hi,
"A day after the name change became official my built in skydrive app stopped working"
Did you point that SkyDrive changed to OneDrive?
Did you move your OneDrive to another location or change its name?
Please login OneDrive with web-based to check if you could access it successfully.
Please refer to the following article to try the troubleshooter and check the service status:
SkyDrive: FAQ
http://windows.microsoft.com/en-in/windows-8/skydrive-app-faq
Karen Hu
TechNet Community Support

HT4356 I can see my printer and iPad on router but iPad cannot connect to printer. Printer is on list of air printer models accepted. Help!

I can see my printer and iPad on router but iPad cannot connect to printer. Printer is on list of air printer models accepted. Help!

You may have to visit the printer manufacturer's web site and look into their support pages to get a print driver for your Mac, and install it. Or see if you can see if a driver may already be in your Mac by checking settings, since there are many drivers already installed in Mac OS X.
Good luck & happy computing!

HT1595 Ive just updated my Apple TV software to V 5.0(4099) and now i cant see you tube etc on my home screen, i can only see settings and computers, what gives? thanks

Ive just updated my Apple TV software to V 5.0(4099) and now i cant see you tube etc on my home screen, i can only see settings and computers, what gives? thanks

I just had this issue. Go into settings and reset the Apple TV after the firmware update. (note just "reset settings" and NOT back to factory settings)

How do I print from my new Ipad to my Canon printer on my wireless network

How do I print from my new Ipad to my Canon printer on my wireless network

Actually, the article tells you to get it on the same network...but not how. No Canon specific application is needed for printer setup. It can all be done from the front panel of the printer.
Look at the manual, it will describe how to get the printer on to your wire wirelless network. Canon support can help.
Next connect you iPad to the same network. The in applications that print, you will find a print option in the share menu. The printer should be selectable from there.

New router can't get connection and can't find set up on macbook

I had to have a new router as i had problems with my internet solved internet problems but now my printer doesnt work unless i connect with usb cable, i have tried everything including deleting the printer, which now i have deleted the set up info off my macbook and can no longer install the printer please help it was working fine with my other router...

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you have replaced your router and are having some difficulties with connecting your Deskjet F4580 to the network. I can help you with that. As you are using Macintosh 10.7 I would recommend using a Windows PC to install the printer on and then to add to your wireless network. If that is not a practical option there are a couple of things we could try. Apple Software UpdateClick on your Apple Icon and go to Software Updates.Install any available updates.Download Apple's HP Printer drivers.If during the install there are no wireless options then:Go to your Apple icon, System Preferences, and Print and Scan.Double-click on the icon of your printer on the left side of this screen.In the pop up window click on Settings, Utility, and then Open Printer Utility.In this new window you should have a wireless tab along the top you can click on.On the left hand side we're looking for a wireless setup wizard.Run the wireless setup wizard to add the printer to your wireless network.Once the printer is connected remove the USB cable from the back of the printer.Go back to Apple, System Preferences, Print and Scan.Click on the plus button in the bottom left corner.Select your printer in this window.If there is a line that says Use that says Airprint click on that to select your printer from the list instead.Click on Add.Try printing.Ad-HocIf the above method does not allow you to connect the printer wirelessly then this may work.Perform a factory reset on the printer. I will include the directions on how to do that in a private message shortly.Turn the printer back on.Press the wireless button on the front of the printer.Wait about a minute.On your Mac or another wireless device you should see a network with a name similar to "HP Print XX Deskjet F4500" listed. Connect to that network.Press and hold the scan button (printer icon below the red x on the printer) for about ten seconds. When you release the printer should print a wireless test report.On the device you connected to the printer open a web browser and type the IP Address in the Address Bar exactly as it appears on the test report.You should have a Network tab along the top of this window.On the left side we are looking for a Wireless Setup Wizard.When you run that that should connect the printer to your wireless network.Once the printer is connected remove the USB cable from the back of the printer.If you connected your Mac to the printer above then reconnect the printer to your wireless network now.Go back to Apple, System Preferences, Print and Scan.Click on the plus button in the bottom left corner.Select your printer in this window.If there is a line that says Use that says Airprint click on that to select your printer from the list instead.Click on Add.Try printing.If this helps connect your printer to your wireless network then please let other forum users know by clicking on Accept as Solution below my post. Likewise if you have any other questions please let me know.I hope this helps and I hope you have a great day!

I can not open print and fax

Last Friday we installed a new printer on our computer at work. It is running OS X 10.5.8. It worked well all day friday, and we were printing with no problems. Now how ever, when I came in on Monday, booted up my computer and went to print something, it just sat there with the wheel spinning and did not progress. I tried to go under the print & fax setting to see if anything was qued in the printer, but now that wont open either. Everything else seems to open, although the computer has slowed down quite substantially. What can i do?

Usually this is because you've got graphics that are cmyk or grayscale not RGB, or that are larger than 4000 by 4000 pixels. Move them on your hard disk so fcp can't find them and make them rgb and resize to an acceptable pixel dimension.

Printer and computers connected to same network but diff IP address so no wireless printing

Comcast just installed high speed internet for me. All of my wireless devices, including my HP printer, are connected to the new network. However, I cannot print to the wireless printer,
When I tried to reinstall the wireless HP software it said that the IP addresses did not agree...the IP address on the printer is 10.0.1.99...my Acer laptop is 10.0.0.3 and I get the same for my MacAir.
How do I remedy this conflict?
P.S. when i type 10.0.0.3 into my browser (I have tried three different ones), nothing comes up.

Oh, well, all of the Comcast routers should be password protected, so I doubt either device can connect to those. I would think that more likely there are unprotected (networks with no password) nearby.
What are the specific SSIDs (network names) on the two devices?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

New HH3 - Issues with Kodak Printer and iPhone 3GS

Hello,
Here is the background:
Previously had a D-Link DSL-G624M router and everything connected wirelessly. This included 2 laptops, Kodak ESP 5250 Printer and iPhone 3GS. Router broadcasting on channel 6 (locked).
Since upgrading to Infinity replaced the D-Link with a HH3. Laptops connect fine but have issues with other wireless devices.
iPhone: Seems to lose internet (not necessarily wireless connection though) intermittently. The phone remains connected to the HH3 and can be seen in the DHCP table and Home Network screens. The iPhone also reports that it is connected to the HH3. However, when attempting to access the internet using either Safari or apps it doesn't work. This can be fixed by forgetting the network and re-joining or turning Airplane Mode on and then off.
Kodak ESP5250 Printer: This connects fine to the HH3 and remains in the DHCP table and Home Network with the correct IP Address. Laptop A is able to connect and print successfully. However, after putting the laptop into sleep mode and re-waking it it is unable to Print. The Printer is still connected to the HH3 and laptop claims it is 'Ready' but unable to print. The only way i have found to fix this is to re-install the entire Printer software!! However, Laptop B does not have this problem and can be put into Sleep mode, Hibernate or restart and the printer remain connected. I do not think it is a firewall issue as able to connect until re-waking from sleep.
You're probably thinking the same as me that this sounds like hardware issues and not the HH3. Maybe coincidence that it started happening after changing to HH3. Maybe something wrong with the iPhone or Laptop A and/or Printer?!? Tried setting a manual channel on the HH3 as suggested by other posts but this had no effect. (Used inSSIDer to determine best channel). Also increased the IP Address lease time from 1 Day to 21 Days - but again no difference.
Current situation: Connected the D-Link router to the HH3 using Ethernet cable. Disabled DHCP and DNS on the D-Link router and kept SSID different. Now connected all devices to the D-Link router and nothing to the HH3 and everything is working as it did previously. The iPhone remains stable and the Kodak printer remains connected to both Laptops after re-waking from Sleep Mode.
I haven't yet contacted BT but i'm leaning towards it being a dodgy HH3. Anyone have any suggestions??
Thanks,
Martyn...

For starters, there's nothing wrong with your Iphone or Kodak prn. The issue is the HH3
I had a very similar issue connecting iMac, iPad, Macbook Pro, iPhone, Thinkpad and Canon prn via wireless to the HH3... Lots of disconnections, devices that couldn't log in, very low wireless speeds, printer not recognized, etc,etc
I went mad, pretty much did the same things as you did: inSSIDer, changing channels, re-installing whole softw drv !, reorientating HH3 position, manually assigning IPs and channels... nothing would seem to work!
Then I connected a Netgear router to HH3 via ethernet cable -like you did- and suddenly everything seemed to go back to normal. Here's what I found out after much head knocking:
1) The issue is the HH3, not that it's faulty but simply put it can't deal with lots of wireless traffic. The minute you connect several devices it gets clogged up
2) HH3 seem not to recognize WiFI printers that have a 'static' IP (not sure why)... this was a nightmare
3) if you have many devices connected, HH3 doesn't seem to 'like' Apple devices or wifi Airport powered (not sure why). After sleep mode these device can't pick up IP over the air, and you need to manually renew DHCP leases. There are several reports about this in Apple forums.
So here's what I did:
1) I ditched the HH3
2) I connected the Openreach router to a dual-band Netgear wndr3400 **cable** router (PPPoE connection)
3) I re-installed the prn drv in USB mode and then added wifi printer in wifi mode while usb connected
4) I created two-split WIFI networks; one in the channel 6/2.4Ghz frequency and another in the channels 44-48/5Ghz freq to which I assigned most devices (It seems BT Infinity wifi works best in 5Ghz channels)
Results: all devices recognised & connected via WiFI, no disconnections, steady WIFI speed almost as fast as ethernet cable, wifi prn prints fine from all devices... No more WIFI connnectivity issues.
I hope this helps, good luck
(note: my current issue is that my profile dropped from 34/8 to 21/2 during testing phase)

I want to create a document in Illustrator that i can use for Print and Web - using 2 different colourspaces.

Is it possible to do this? I need to create a document so that I can export as a high quality CMYK for print and export the same file as RGB jpeg / pdf for web and email use. Do I have to create the document with 2 different colourspaces, or can I change / convert the colourspace after I have created and finished the document? or is there some simple way to select an RGB / CMYK option when saving/exporting?
look forward to your reply!
Tom

Tom,
In addition to what Monika said, the document can be either CMYK or RGB Colr Mode, but not both.
And you are right in starting with the CMYK because that will ensure (to the degree possible) that the CMYK and RGB versions match in colour (gamut, the CMYK gamut being the more linited and almost entirely included in the RGB gamut); this will prevent more vivid RGB colours which will make the CMYK colours seem duller.

Create a form that user can fill online, print and not save.

I have form that I want user to fill out. I want them to send it via email or print and not save the information that was typed into it.
Where or how do you put that type of security?
Thank you!
Jim Z

through adobe policy server you can give only online access to the document(means that document will not be opened unless user is authenticated with the policy server) and assign policy to user to restrict him only printing and filling in form fields.
Also you can revoke that document after sometime.

How can someone add servers and computers to a separate domain in a separate forest without having permissions to the other forest?

Hello Community
    On an existing network I added separate domain in a separate forest using WS2012.
    Lets call it "MyDomain" and "MyForest" on WS2012.
    In MyDomain and MyForest I am the only domain administrator.
    The problem is if you go to "File Explorer" and click on "Network" in MyDomain in MyForest,
I see that other server administrators have added their servers and workstations to
MyDomain in MyForest but I never added them as users or administrators to my domain in my forest.
    So the question is how can a someone from a separate domain in
a separate forest add servers and computers to MyDomain in Myforest
when I haven't added them as user or administrators or given them
any permission in MyDomain in MyForest?
    Thank you
    Shabeaut

Using the network in file explorer, this shows machines that the computer has automatically detected using built in Microsoft processes. All this means is that you have other computers on the same physical network as yourself. These are no necessarily part
of your domain. If the machines are set to respond, then so long as they receive a discovery request from your PC they will respond and populate that list. This does not mean they are part of your domain, or that they have access to any of your computers (
apart from low level stuff like ping which does not rely on domain membership.)
Apart from a Domain Admin, the only other people who can make changes to your domain are whoever is an Enterprise Admins. Domain Admins have control over their domains but Enterprise Admin have full permissions to the entire Active Directory infrastructure,
no matter which forest or domain it is.

Can Wired Printers Print Over A Wireless Network Through USB Connection to the Router

I have been told by supposed experts that I can use older wired printers wirelessly through USB connections on a router and I have been told by other supposed experts that it does not work. This is what I have and what I am trying to do:
In my new home I have limited space and I dedicated an unneeded closet to office and computer stuff. I rebuilt the closet with shelves and drawers and I added power outlets and phone and coax jacks. I use a wireless HP Pavilion laptop (about a year old) running Vista anywhere in the house. The computer closet has an HP C309 wireless printer, an HP D4260 wired printer, and an Epson Photo R280 printer. I can't get cable or FIOS right now, so I am running the internet on DSL at 3.0MB. That signal goes into a router supplied by Verizon and I jump it over to a Netgear RangeMax Wireless-N Gigabit Router with USB.
There is no particular reason to have the Netgear router in the lineup except that that two networking "experts" (their term -- I have no frame of reference to judge them) said I could connect the HP D4260 and the Epson printer via USB cables to the Netgear router and then send documents to them over the wireless network. When I have these two older printers connected to the Netgear router, the network does "see" them and shows them as network printers. However, no documents ever arrive at them.
As an author, I print thousands of pages a year in draft mode for review and I would prefer to use the HP D4260 as it is far cheaper to operate and it prints far faster and quieter than the HP C309. Connecting it directly to the laptop is not convenient as it is nowhere near where I use the laptop.
Is there anyway to get at least the HP D4260, and preferably also the Epson R280, to print wirelessly via the network by connecting them to the USB port on the Netgear router? If not, I will have to buy a cheap, fast wireless printer, something I really don't want to do.
Thanks.

You did not give the model number of your Netgear, but I am sure that some Netgear routers with USB support USB hard drives and printers, where some models only support USB hard drives.
Either provide your model number or look at your documentation to see if your router actually supports printing.
Also, since you essentially have two routers in your home, make sure that ALL devices (printers and computers) are connected to the Netgear router, not to your DSL router.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Can no longer print or scan wirelessly

Good afternoon!
I am having a problem that I am having a difficult time solving. Up until last week, my Macbook Pro w/ OSX 10.10 my computer would print wirelessly to my printer with no problem. As of about one week ago, the computer no longer will print to the printer.
Here's what I've done so far...
1) The ink cartridges were low, so I changed them thinking that might be the culprit. No fix.
2) Updated the driver and firmware. No fix.
3) Deleted the printer and added it back again. No fix.
4) Reboot everything. No fix.
5) Repair Disk Permissions and delete/add the printer back again. No fix.
What more should I do? The printer works because I can print from my iPad to the printer with no problem whatsoever. I'm just baffled why it no longer can receive information from the Macbook.
Please help!!!
~Frustrated and Confused user in Atlanta

Hi @srdecarlo , and welcome to the HP Forums!
I understand you're having issues with your wireless connectivity. I would like to help!
I would recommend powering down your computer, and selecting the setup icon on the printer. In the setup menu, select network, and select restore factory defaults.
Once the defaults are restored, Disconnect the power cord from the printer and the power outlet, and unplug the power to your wireless router. After 60 seconds, plug the router back in and let it broadcast.
Once it's broadcasting, power on the printer and run the Wireless Setup Wizard in the network menu.
Once the printer is reconnected to the network, power on the computer and readd the printer.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Problem with printer and laptop wireless connectio...

Hi In the last 2 months we have found that the only way we can get the wireless printer and the laptop to connect to the wireless hub is by switching off the hub and restarting it. The printer will then print and the laptop connect to the internet but once either is switched off again the only way we can get the hub to 'talk' to them is by switching off the hub. I have been in touch with BT advisors this morning but not really got anywhere. The chap was going to change the BT frequency but we have a Hub 3 so I don't think this is relevant. Apparently we have got a good broadband speed. I am not technical in any way but logic dictates it must be a hub problem. Has anyone had similar problems - or any ideas. The main tower PC has not had problems so far but we have noticed that short videos have been so slow that at times they freeze. Again this is very recent. Many thanks.

Hi Bob - not sure where Neener went nor if his issue was sorted out, but I'm stuck in the same place. The manual for the printer tells me to select a WLAN network and put the printer in SES/WPS/AAOS mode - which I did. Then it, in theory, went looking wirelessly for my Airporter Extreme. It thought for 3 minutes and then came back with "No Access Point". The AE is working fine, but the printer can't find it.
And another weird issue is that when I installed the drivers from the CD that came with the printer, it doesn't show up anywhere on my computer - nor does it show up as an option to add the printer. It's just non-existent.
Here are the details....
Printer: Brother HL-3070cl
MacbookPro: 10.6.7
Router: Airport Extreme
Wireless mode: Create a wireless network
Wireless security: WPA2 Personal (is that ok even if this is for a business?)
Connect using: ethernet
Configure IPv4: Using DHCP
Any help you can offer me would be SO appreciated. I'm pulling my hair out and have been trying to figure this out for nearly 2 hours now!!
THanks,
K

New modem, can't reconnect printer and computers wirelessly

Similar Messages

Maybe you are looking for