New motherboard - backups working but Star Wars not working

A while ago I had to replace the motherboard on my G5. As I still have Leopard, I followed a set of instructions to make sure that the new MAC address was used by Time Machine and that I continued to use the same backup set as if nothing had happened. I think I used dethbunny's instructions here: http://hints.macworld.com/article.php?story=20080128003716101.
It all seemed to work fine. I checked in Finder and the new backups were being added correctly and old ones were being deleted. I left it at that, but should have done some further checking.
I recently discovered (when having to recover a backup for one of my kids) that whilst all the backups are on the Time Machine disk, the Star Wars user interface cannot see them. I can access them through the Finder or Terminal but not directly through Star Wars. All Star Wars shows is the current position of the data disks.
Does anyone know how to get Star Wars to see the backups. It's probably some simple permissions step I've missed.
Pondini?
Thanks
Andrew

Sounds like the workaround didn't work (I tried it twice a few years ago, and couldn't get it to work), and the old backups are treated as if they were from a different Mac.
Try the Browse... option, per Time Machine - Frequently Asked Question #17.
If that doesn't help, it's possible the backups are treated as being on the same Mac, but a different drive. Try the procedure in #E3 of Time Machine - Troubleshooting.

Similar Messages

I have just bought a new TATA PHOTON MAX, but, this is NOT working on my MAC LION 10.7.4.

I have just bought a new TATA PHOTON MAX, but, this is NOT working on my MAC LION 10.7.4.
I was using a Reliance Netconnect+ and that was working on the same machine. Kindly suggest if there is a way that the TATA PHOTON MAX can work on this.
Thanks!!!

Contact the maker of that product.

I bought a new IPHONE from apple reseller and the earpiece is not working . There is no sound .Speaker and headfone are working but earpiece is not working . How can i get it replaced.

I bought a new IPHONE from apple reseller and the earpiece is not working.
There is no sound .Speaker and headfone are working but earpiece is not working.
How can i get it replaced.

You can get service information on this web page.
Regards.

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
Not necessarily. That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio. You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise.

IMAGEIO IS WORKING BUT BYTEARRAY IS NOT WORKING:

Hi all
I am getting images from gmail contacts and trying to store it in DB
using my http code:InputStream is=urlconnection.getInputStream();
i could able to store the inputstream in file using:
BufferedImage filebuffer=ImageIO.read(is);
FileOutputStream fos=new FileOutputStream("picturerecent.jpg");
ImageIO.write(filebuffer, "jpg", fos);
but i was trying to store it in DB using the following code but it is not working.i am having a question that
how it writing to a file without any problem.why not to database:
try {
       String url = "jdbc:mysql://localhost:3306/";
         String db = "test";
         String driver = "com.mysql.jdbc.Driver";
                Class.forName(driver);
                con = DriverManager.getConnection(url+db,"root","");
                try{
PreparedStatement psmnt;
     psmnt = con.prepareStatement("insert into gmailphoto(id,Photo) "+ "values(?,?)");
     psmnt.setInt(1, 9);
     psmnt.setObject(2, is, java.sql.Types.BLOB);
     int s = psmnt.executeUpdate();
       Statement st = con.createStatement();
    try{
        ResultSet rs=st.executeQuery("select photo from gmailphoto where id=9");
        if(rs.next())
          {     //byte[] bytearray = new byte[4096];
              int size=0;
            File sImage;
//FIRST TRY
            FileWriter wr=new FileWriter(new File("c:\\imageOutput.jpg"));
            IOUtils.copy(rs.getBlob("photo").getBinaryStream(),wr);
            //SECOND TRY
            BufferedImage bf=ImageIO.read(new ByteArrayInputStream(rs.getBytes("photo")));
            FileOutputStream fout=new FileOutputStream(new File("C:\\imageOut"));
            if(bf!=null)ImageIO.write(bf, "jpg", fout);
            if(wr!=null)
            wr.flush();
            wr.close();
          rs.close();
       }}catch(SQLException e){
            System.out.println(e);
       }Thanks a lot for help

but i was trying to store it in DB using the following codeThere is no code here that writes to a database. There are two lots of code that write to a file.

My WiFi & Ethernet connection works but automatic is not working

The settings for my networking have gone kuh fluee (sp???) since I got up and running on my brand new MBP with 10.5.1 (and yes, I've installed all of the updates).
I have 3 locations set up (or I thought they were set up as they worked on my old PB):
WiFi
Ethernet
and then there's AUTOMATIC
Both my WiFi and Ethernet work fine. I want the Mac to understand that if Ethernet is connected, go and use Ethernet; if no Ethernet, then use the WiFi. I thought this would work when the location is switched to AUTOMATIC. AUTOMATIC simply just can't seem to connect. It continues to show all lights green except for the NETWORK light. I restart the modem and router over and over and the Networking thing just keeps telling me to do that again. Ok - what am I NOT getting here. Again, note that both ethernet and WiFi connection as separate locations work; what is NOT working is AUTOMATIC and I want that to work so that the Mac "automatically" detects what is out there for me to connect and if Ethernet, it connects via Ethernet.
Insight? Solutions? Advice???

The following is an excerpt from The Peachpit Learning Series for Leopard but I am sure it applies to Tiger and probably Panther as well. I have four computers at home, three with Leopard and one with Tiger. One Tiger machine is connected to my Airport Extreme via ethernet and my other desktop runs Leopard and also is connected via ether net. My two laptops are connected via Airport.
Open network preferences via System Preferences. You'll see the network window which should list your networks on the left had side of the page in the order of preferences what you might want to do and your individual computer is change that order of preferences to Ethernet first and Airport Second, that way if you are connected via ethernet it will connect that way. If you are not connected via ethernet it will look for the ethernet connection first and not seeing one, it will move on to Airport. You can change the order of preferences by clicking the activity button at the bottom of the window on the left that looks like a little cog wheel and then set service order.
I'm not 100 percent sure but by choosing automatic it either tells the system to do the above automatically when you open your browser or email to it means go to your wireless system of preference.
Hope this helps.

TS3367 facetime used to work but now does not work on any of my devices

I have been in regular contact until about 4 days ago using facetime on my iphone 5 imac 10.7.5. ipad 2 now none of these devices work from incoming calls from Philipinnes. Take note the caller had latest macbook pro 13 inch and is able to call Guam on fatetime with success. What is happening why is incoming calls alway failing. This has been 4 days running and is not good enough. Okay I havent got the latest updates but why in the late few days whould this effect anything. I mean 3 devices and none of them work. This is most frustrating and annoying. I have intead used skype which does work but at night time the camera is not as clear. Tanke note also earlier in the year I received calls from Vietnam and although I did have dropouts was always able to connect only these last four days have had no success. Also I have not been able to call out. The wireless has full bar and am near the modem that is not an issue. Unless there has been a recent change why is htis not working all of a sudden.

THere seems to be a FaceTime issue and some users who have been in contact with Apple support claim that Apple is working on this.
I have read many posts on the issue and have seen that there are many reporting that when they have updated their various devices to the latest software, the issue has been resolved.
You can wait for Apple to resolve the issue OR you can update everything to the latest software and see if this solves your issues.

Using Garageband and I cannot hear previously recorded tracks on headphones. Prefs are set to output on EMU0404 my audio device - this did work but now is not working.

I am using Garageband and I cannot hear the previously recorded tracks on my headphones. I am using an audio input/output device, EMU0404 - this was previously working fine but stopped. All cables check out OK and so does the unit - I have updated to the latest version of Garageband but this did not help. Any suggestion?

Hi Christoph,
I cannot see anything wrong with the EMU0404. This is what puzzels me ... Garageband looks OK - headphones are OK - EMU looks OK.
Thanks anyway
Paul

Update working, but insert is not working.

Hi friends,
Im creating a process for the manular tabular form, that im developing.
Since for the update im giving the below query
for i in 1..htmldb_application.g_f01.count
loop
if htmldb_application.g_f01(i) is not null then
    update gen_req_items
    set item_id = replace(htmldb_application.g_f03(i),'%'||'null%',NULL),
       item_uom_id= replace(htmldb_application.g_f04(i),'%'||'null%',null)
      where req_itm_id = htmldb_application.g_f01(i);
end if;
end loop;It is working fine, and i can able to update the rows in my tabular form.
For insert im giving the following query.
for i in 1..htmldb_application.g_f01.count
loop
if htmldb_application.g_f01(i) is not null then
    update gen_req_items
    set item_id = replace(htmldb_application.g_f03(i),'%'||'null%',NULL),
       item_uom_id= replace(htmldb_application.g_f04(i),'%'||'null%',null)
      where req_itm_id = htmldb_application.g_f01(i);
else if
if htmldb_application.g_f01(i) is null
insert into gen_req_items(barcode, item_id, item_uom_id)
values(htmldb_application.g_f02(i),replace(htmldb_application.g_f03(i),'%'||'null%',NULL),replace(htmldb_application.g_f04(i),'%'||'null%',NULL));
end if;
end if;
end loop;But the insert is not working, as i couldnt able to insert the values. I dont know what went wrong.
The below is my region source coding of my tabular form.
select x.req_itm_id,
x.barcode,
x.item_id,
x.item_uom_id
from (
select htmldb_item.text(1,req_itm_id) req_itm_id,
htmldb_item.select_list_from_query(2,barcode,'select distinct barcode, barcode from gen_req_items') barcode,
htmldb_item.text(3,item_id,10) item_id,
htmldb_item.text(4,item_uom_id,10) item_uom_id
from gen_req_items
union all
select htmldb_item.hidden(1,null) req_itm_id,
htmldb_item.select_list_from_query(2,null,'select distinct barcode, barcode from gen_req_items') barcode,
htmldb_item.text(3,null,10) item_id,
htmldb_item.text(4,null,10) item_uom_id
from dual) xIm developing a manular tabular form by referring the below link, FYR
http://www.oracle.com/technetwork/developer-tools/apex/tabular-form-090805.html_
what might be wrong with my insert statement.
As i also created sequence and trigger for my primary key column req_itm_id in tabular form
Brgds,
Mini

Mini wrote:
But the insert is not working, as i couldnt able to insert the values. I dont know what went wrong.
You've posted here often enough to know that this isn't really sufficient detail. Regarding the above statement, how did you reach that particular conclusion? It might sound like a stupid question, but it gives us a bit of insight into how you have attempted to diagnose the problem and can speed up its resolution.
* Does the insert work "standalone" i.e. if you write it as a manual query in, for example, the SQL Window, using bind variables?
* If it does, do you have any special constraints on one or more of the relevant fields (e.g. "not null" on the barcode field)?
* If so, have you ensured that the relevant field(s) (e.g. F02) are actually populated with values and are valid for insertion?
In addition, I'm not sure what the purpose of the nested "If" statement is
if htmldb_application.g_f01(i) is null
end if;Indeed, the else if won't work either... the correct syntax is elsif

Microphone works but dictation does not work

My dictation software was working fine then suddnely not so much. I have ensured it has been enabled, I have selected automatic detection as the default, I have choesen the internal microphone as the default, I have chosen the external microphone as the default, I have even deleted the
file://localhost/Users/williams/Library/Preferences/com.apple.assistant.plist file and rebooted, tested my internal and external microphones through the system preferences dictation setup (both register as working while in dictation preferences as indicated by the microphone symbol responding to sound), I've ensured the language was set to english (US) and closed all other programs.
Once the dication command is selected the microphone pops up and viola no response as if the microphone is no longer working!!! I am sooo much more productive with the speech to text function and really need it back. Anyone with any new/additional suggestions will be most welcome and I appreciate the help!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

TS2771 screen works but buttons are not working and stuck in settings

i have an ipod touch 4 and the screen is working but the home button and lock button is not working but the screen is and im stuck in settings please help asap i have to go to school

Try:
- iOS: Not responding or does not turn on
When it says place the iPOd in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

SSH to PIX works but HTTP does not work

Hi
I can SSH to pix but not HTTP to pix although http is enabled.I am using ACS/RSA for user authentication.I see SSH is allowed in ACS but I do not know How to configure ACS so that I can HTTP to pIX ?I am trying to connect to pIX with Cisco Network Assistant ,it will connect but asks for username and password and when I put in username and password it comes back asking the same

The WebUI can not use RSA for authentication. As a test try setting it to local.

I bought a new computer, transferred music, but purchased music not working

I am going from a computer with 4 accounts, each having it's own iPod application and library to a new computer. I want to (a) eliminate user accounts and have one big iTunes library, and multiple users choose what music they want from that library; and (b) be able to use the purchased music.
I had no problem transfering all the music, however, because I reinstalled iTunes, and I happen to have a new email account, I created a new iTunes account. Even though I followed the directions to "Authorize this computer", the purchased music in my librarly will NOT synch up to my iPod.
Also, I've spent hours trying to figure out how to have four people share the library so I'm not duplicating the iTunes application or all that music, and I cannot figure out a way to do it. Even creating specific playlists doesn't work, it downloads all the music (that I didn't buy) anyway.
Help!!!

I've had similar issues. I purchased a MacBook, followed the instructions to transfer my library to my new machine using my iPod, and it would not sync 140 songs to the iPod.
Then, I purchased a movie from the iTunes store, it downloaded, won't play on the MacBook, and when I tried to sync it to my video iPod, it said that it couldn't sync it to the iPod because that iPod was not capable of playing videos.
I've restored it twice, reinstalled itunes, reinstalled the library. No change.

HT4527 I am trying to transfer music to a new computer using homeshare but it is not working.

I can see the library from the "old" computer and can "select all" as the online help suggests. There is not an "import" button on the bottom right of itunes as the online help suggests and I don't see any options on the drop down menus to do this. I am using the latest version of itunes 11.0.1.12.

If you're having problems with home sharing, your other options for transferring your music are here http://support.apple.com/kb/HT4527
and here...
Syncing to a "New" Computer or replacing a "crashed" Hard Drive

HT1918 im trying to add my new credit card info but it s not working and sais i have an unpaid balance? I dont have an unpaid balance please help

Im tryng to add my new credit card info and it wont accept it and sais i owe and outstanding balance?? I dont have an outstanding balance please help

Hello there, bigjazzdogg.
The article you were referred to us from, provides some additional information that will allow you to reach a resolution for your issue:
iTunes Store: Changing your payment information
http://support.apple.com/kb/HT1918
Particularly, in your case:
Get help
If you need help changing your payment information, contact iTunes Store support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

New motherboard - backups working but Star Wars not working

Similar Messages

Maybe you are looking for