New motherboard in GT680 - display doesn't work!

Hi!
I had to replace motherboard in my GT680. I've put ms16f21 version 1.2 in, the only difference between new and old motherboard is the version. 1.1 is used in GT680, and 1.2 is used in GT683. I've read somewhere there's no difference between these motherboards, so my GT680 should work with version 1.2.
And it turns out my display doesn't work now . Does anybody know what might be wrong? I've checked connections and battery on motherboard, and everything seems to be placed where it should be.
I thought it may be because of my graphic card. I've got 460M (standard for GT680), and GT683 usually have 560M. Do you think I might have to upgrade gpu too?
Ps. Please don't tell me it's best to ask MSI support, I wouldn't write on forum it that solved the problem .
Thanks in advance:)

Quote from: SialeQ on 11-June-13, 04:51:09
Defective motherboard is quite likely, I just wanted to rule out any other possibility before I contact a seller I'll do one more test tomorrow, I'll put the old motherboard back. If it works, new board is probably damaged and I'll have to contact seller. If old board doesn't work either, then I messed up something when putting laptop together (or another component magically decided to die)
I'm not sure if MSI would replace it, I bought it second hand on ebay, and both warranty seals (on case & on graphic card) are broken :/
The seals being broken won't void the warranty, as long as there is no internal user caused damage they will cover it. I just don't know what the coverage is for second hand.

Similar Messages

Apple Store said my display doesn't work but offered no solutions.

Just got back from the Apple Store. They confirmed my iPad is fine but the display doesn't work. It's black. Their only option was to pay $300 for a new iPad. Mine is only 88 days out of warranty and I took it in the store once already for the display issue that led to its ultimate demise. To talk to anyone else is $20. I refuse to pay more for a product that has shown itself to be unreliable. What's the next step? I truly feel wronged. iPad is in perfect physical condition.

I took it in in May of last year. The screen has black bars flash, the screen goes black for a moment, and then it comes back on. It can be days between the issue. When I took it in, it didn't do it. I had to wait forever even with an appointment. I didn't want to take it back in even though it has been having the issue all along. There was no way of knowing when it would happen. It finally flashed and never came back on.

IMac - Display doesn´t work after restart

My iMac 21 Display doesn´t work after restart. If I turn it off and 1 hour later I want use it again the iMac shows the white screen with the mac logo and then the display goes off. I connected an external display to check if the iMac was ON and with the external display I can login and do everything but the iMac Display doesn´t work .
If I turn it off and wait 3 or 4 hours and then turn it back on the display works OK.
This is very strange behavior I have spent hours and hours trying to fine the solution or a similar issue but nothing so I am looking help here at apple.com
BTW When I bougth the iMac 21 there were some spots over the display so the display was replaced by the provider. The warranty has expired by now.

To tell you the truth, I don't know if they have to repalce the LCD panel or what they do for a bad backlight. In this reality of block or assembly replacement it probably involves repalcing the panel and not the backlight component. Don't know what it would cost. You'd have to ask that of a service center.

Help! I have had my iMac G5 fitted with new Logic Board but it doesn't work

Help! I have had my iMac G5 fitted with new Logic Board but it doesn't work
I have just had my iMac G5 First Gen 1.8Ghz fitted with a new Logic Board under the Apple Repair Extension Programme for iMacs.
I got the iMac home from the repairers and switched it on and everything was working fine for about 2 hours and then all of a sudden the Error Page came up on the Screen (with a big On/Off Switch Logo) and it said I had to shut down.
So I shut it down waited a few minutes and then tried to re-boot it but nothing happened. All that happended was the Power Light in the Right hand corner came on..but nothing else....
Help! Any ideas what to do please?

If you have an external firewire drive (it has to be firewire, USB won't boot on a Rev A), plug it in to the firewire port and turn it on, then boot your iMac and see if it shows on the screen.
Have you tried to hit the eject (up arrow, the last button on the top row of the keyboard) button when you boot, perhaps the repairers left a disc in the drive? Then try and put your install disc in.
Miriam

I am trying to sign in to attend a session and it says 'Invalid user or password. Please try again.' I have reset my password and it still doesn't work. I created a new AdobeID and it still doesn't work. I need to attend this training. How can I get in?

I am trying to sign in to attend a session and it says 'Invalid user or password. Please try again.' I have reset my password and it still doesn't work. I created a new AdobeID and it still doesn't work. I need to attend this training. How can I get in?

Sorry to hear about this problem. What site are you trying to log in on? Is it a Mozilla site? Usually you don't need to register or sign in to a Mozilla site to use Firefox. Usually you can just go straight to where you want to go.

Stand-by button on Cinema HD display doesn't work after Mountain Lion upgrade

Hi,
After I upgraded my Mac mini (spring '09) to Mountain Lion it appears that the buttons on the side of my Cinema HD display doesn't work. There is a setting in sys preferences that should put the Mac in stand-by when the power button is pressed. This doesn't work after I upgraded to OSX 10.8 Mountain Lion.
Does anyone have similar experience. Anyway to fix it?
Thanks,
Henrik

Have done some further investigating (to no avail). The TV is displaying in my system Info as follows:
Intel HD Graphics 3000:
Chipset Model: Intel HD Graphics 3000
Type: GPU
Bus: Built-In
VRAM (Total): 384 MB
Vendor: Intel (0x8086)
Device ID: 0x0116
Revision ID: 0x0009
Displays:
Color LCD:
Display Type: LCD
Resolution: 1440 x 900
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Connection Type: DisplayPort
TOSHIBA-TV:
Resolution: 1920 x 1080 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Mirror: Off
Online: Yes
Rotation: Supported
Television: Yes
But nothing on the screen.
Does anyone know if Apple have banned certain screens????

I have iPhone 4S with new ios7, and panorama wallpaper doesn't work ! It let me shoose it, but it's not work, why?

I have iPhone 4S with new ios7, and panorama wallpaper doesn't work ! It let me shoose it, but it's not work, why?

These prices are for the U.S.
Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model          Out-of-Warranty Service
iPhone 5          $229
iPhone 4S          $199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone          $149
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.
When setting up out-of-warranty service, Apple will request credit card pre-authorization for the maximum service fee listed above. This amount will be deducted from your credit limit. The final service fee we charge will be determined during testing and may be less than the service fee listed above.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.
Apple reserves the right to determine whether or not your iPhone is eligible for Out-of-Warranty service. iPhones that are repaired or replaced have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see Apple's Repair Terms And Conditions for further details.

Hallo! I have Pavillon 5 with internet key.My new printer all-in-one doesn't work in web mode.

hi! my new web printer doesn't work in wireless mode. Pheraps is necessary a router? Thanks to everyone can help me! :-)

Hello maggio63,
You would definitely need to set up a network on a router with a modem for internet connection.
Once this is setup, you can follow this link to enable ePrint.
http://h71028.www7.hp.com/hho/us/en/ep/articles/setting-up-mobile-printing.html
Although I am an HP employee, I am speaking for myself and not for HP.
If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

The display doesn't work when phone is locked

My z3 is abt 6 months old
Recently I locked my phone and tried unlocking it but the screen never turned on though I can see the screen lighting up a bluish colour but the display doesn't appear.
I have to swith off the phone for around half an hour and restart for it to work.
Any idea why

Try repairing your phone with Sony PC Companion
Sony PC Companion.
http://support.sonymobile.com/us/tools/pc-companion/

My iMac Display doesn't work!

I hear the sound when he starts but the display stays dark! why?
Please Help me!!!

First, detach any peripheral devices except keyboard/mouse. Then reset the SMC:
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
If that doesn't change anything, follow the steps in this Apple note: http://support.apple.com/kb/TS2570 . When you get to the section on using Disk Utility to repair the disk, use Lion recovery mode by booting with command and R held down. Assuming of course by then you can view something on the screen. If the screen still doesn't work, take it in for service.

IMac 17" Intel CD: display doesn't work

ciao,
today when I switched my iMac on the display remained dim, just like if it was off, while everything else worked OK.
so the display was black like it was off, but then I noticed that if I looked very carefully I could see the login box and I managed to log-in.
to cut the story short: the iMac is working OK but the screen is so dim it looks like it is off.
what can I do? Apple support chat told me to try to reboot the iMac pressing Command-Option-P-R, and that this doesn't work it is an HW problem: any other suggestion/reccomendation?
thank you very much
andrea
ca.pattacini[at]gmail.com
iMac 17" Intel Mac OS X (10.4.6) Display not working...
iMac 17" Intel Mac OS X (10.4.6) Display not working...

Try the F14 & F15 buttons. Those control the brightness of the screen. That should be able to solve that problem. I had that thing before until I messed with the keyboard and "discovered" it.

Display doesn't work after latest security update

I have three Apple displays with my MacPro, and after installing the latest security update, one of them just stopped working.
The status light is still on, and my usb devices connected still function, but I have a black screen and nothing is recognized in the displays system preferences.
Anyone else experience this? Did my display just die?

Ut-oh!
FWIW:
My 7-year-old 22” Cinema Display, on a 10.4.11 machine, with nearly constant use, now becomes so dim during the screen saver mode that regardless of which saver I use, it becomes no longer visible.
As soon as the screen saver is activated, I have full brightness (though not as bright as when the display was new), then it gradually fades until the screen is all black.
Upon awaking, the screen is very dim, and then, over a 90 second period, it slowly returns to normal brightness.
1. The brightness control is set to max.
2. I have toggled the brightness control and changed screen savers, both to no avail.
3. Recalibrating the display did not work.
This seems to have occurred on the same day I installed the latest Apple Security Updater.
Very weird...

Display doesn't work after power outage

The electricity was knocked out in my neighborhood for a few hours and when it was finally restored I found that my display no longer works. It is getting no power at all. None of the lights on the front of the display are working--it's totally dead.
No settings or connections were changed during the time when there was no electricity. So it's obviously a result of the power outage, right? I had it plugged into a surge protector (which I thought was supposed to be a safeguard against exactly this type of occurence) so I'm wondering if that has somehow saved me--only there's some secret Mac trick that needs to be done to get my display back to life.
Can anyone please help me? This economy is strangling me to death--I simply cannot afford to buy a new display at this point.

I just realized that I never actually asked my question (duu-uuuh):
Can anyone tell me if there is a way to figure out (without having to spend any money) if my problem is only with the power supply or if the entire display is just garbage at this point?
Or perhaps someone has experienced this situation, was able to resolve it and knows what I should do to make my display functional again?

How can i get the video if I go on tv5 news for the moment it doesn't work!

How can I get the video if I go on tv5 news? for the moment it doesn't work!

thank you very much, I am sorry but I don't know what all this is!! I am a new apple user ... comming from PC ! I go on internet to view the news and the video doesn't appear so I suppose, like on my computer that there is something that I have to download to make it work!

My macbook pro suddenly turn off and now when I turn it on the display doesn't work but it is on!

Hello everyone,
My macbook pro 15" suddenly turned off. Now i tried several time to switch it on and seems it is working but the display doesn't function or there are many wired pictures coming up sometimes.
can anyone please help me with this issue?
Thanks

Welcome to the Apple Support Communities
Your Mac can't find any bootable partition.
1. Insert the Mac OS X DVD that came with the Mac and press C key while your Mac is starting.
2. Select Utilities > Disk Utility, choose Macintosh HD in the sidebar and repair the disk. If it doesn't work, take the Mac to an Apple Store.
Also, open  > Startup Disk, select Macintosh HD and restart. Maybe your Mac has forgotten the startup partition

New motherboard in GT680 - display doesn't work!

Similar Messages

Maybe you are looking for