New Movement type

Hi all
I created 901 movement type by copying 201
I also created 902 movement type by copying 202
i maintained 202, in reversal movement type for 201
i maintenance diff account grouping to post to diff accounts for 201&901
I went to MIGO_GI and tried to select 901 movement type, it is giving error like "Movement type 951 is not planned for this operation"
I tried MB1A, again "You have entered a movement type that has not been defined for this transaction/event."
After seeing these i understood like i though i have to maintain these new movement types in MIGO through SPRO>Settings for enjoy transactions>settings for transaction and reference documents
There for each For each reference documents  like PO, reservation, other only one movement is allowed
For PO it is 201, i like to add 901 here too,
Can some 1 help me in this regard
Regards
Bhushan

Hi sasi,
Follow the steps creat a new mvt type
Creation of new movement types is not recommended. SAP has given all the movement types which are required. If they is a genuine requirement then you can go for it.
If you still want to create a new movement type.
Tcode: SPRO -- Materials Management -- Inventory management and phy. inv -- Movement types -- Copy, Change Movement Types.
Then select the relevant from the field selection list for that movement type.
Then give the reference movement type in 'from' field and 'to' field will be ur new material number.
Then everything will be copied from the reference mvt type, if anything is to be changed, change and save.
Go thru this link, to get additional info.
http://help.sap.com/saphelp_47x200/helpdata/en/a5/63319343a211d189410000e829fbbd/frameset.htm
Hope this clarifies.
regards
Hareesh

Similar Messages

  • Accounting Document for New Movement Type

    Good day!
    Here's the scenario: I have created a new movement type in SPRO. I just copied from the existing movement type closely related to what I wanted to create. I executed the transaction in MB1C and it went well and generated a Material Document number. When I viewed the Material Document number in MB03, it has no Accounting Document number. Is there any config that i missed? How can I relate this transaction to accounting?
    Thank you for your assistance.

    hi
    first check which movement type u have copied .
    now check is ur material is valuated for the plant
    now in OMJJ go to ur movemnttype  and in update control u should have value and quantity update entry
    also check if u have used the po as free or if it is initial entry then check ur material master price
    hope it hellp
    regards
    kunal

  • Error while creating new Movement Type

    All SAP Gurus,
    We are creating a new Z movement type by copying the 101 movement type (T code: OMJJ).
    But system is not allowing to create a new movement type and giving an error message as 'Specify the key within the work area'.
    We are unable to create a new movement type due to this error.
    Please help...................
    Regards,

    How did solve the problem
    plz let me know
    thanks.

  • Creation of new movement type for Goods Receipt

    Is it possible to create a new movement type same as 101 (goods receipt)?  We need to create a separate movement type of 101 for the purpose of separating G/L account to be used for local and importation purchases.  Or is there any other way to separate the G/L account for GR of local and importation purchases without creating a new movement type?

    You can create new Mvt type by copying Mvt type in OMJJ trxn ..
    Please follow the following steps
    Check whether you can use the preset movement types.
    If not, define new movement types as follows:
    1.  Once you have carried out the activity, the system displays a dialog
        box for field selection. In this, you can restrict the movement
        types you work with to various fields. To copy a movement type,
        select the field  Movement type and choose Continue. The dialog box
        Define work area appears.
    2.  In the dialog box Define work area, enter the movement type you want
        to copy in the From: field. In the To: field, enter the name of the
        new movement type you want to create. To go to the overview of the
        selected movement types, choose Continue.
    3.  Select the movement type you want to copy, and choose Edit -> Copy
        as.
        Overwrite the selected movement type with the new movement type
        (beginning with 9, X, Y, or Z) and copy all dependent entries.
        The system copies all control indicators from the reference movement
        type to the new movement type.
    4.  Check all views for the new movement type and, if necessary, change
        the control indicators. Please note that some views have a detail
        screen.
    5.  Copy the reversal movement type and enter it in the view
        Reversal/follow-on movement types.
    6.  Save your settings.

  • CREATION OF NEW MOVEMENT TYPE

    Hi,
           I have a query regarding creation of a new Movement Type.
    Is there any specific rule to start creating new Movement Type only with numbers starting with digit 9 or we can consider numbers starting with any digits.
    Please clarify this as soon as possible.
    Thanks in advance.
    Thanks & Regards,
    Srinivasa M.S
    =91-9910077829

    Hi,
    You can create Movement Type  with numbers starting with digit 9 or beginning with Z or  X or  Y alphabet  folllowd by number ( for example: Z01,Z02,Z09 etc)which you can differentiate  standard Movement Type   with customised Movement Type  .
    For more check the link:
    http://www.sap-img.com/materials/how-to-create-a-new-material-movement-type.htm
    Regards,
    Biju K

  • Error during creation of new movement types

    hi frnds,
        while creating a new movement type for 311 with z11....in help text tab..it is showing an error..
    " Entry HULIST does not exist in TSTC (check entry) "...how do i resolve this.
    Regards,
    Prasath

    Hey while copying the movement type to another use OMJJ
    If any table entry is missing that can be maintained in SM30
    Check it out
    Regards,
    Raman

  • What we need creation of new movement type ? when will be used?

    Dear guru,
    pls clarity

    Hi Sai,
                  Many a times you want to post value of some transactions to different G/L account for the same material depending on  scenarios..like scrap generated at x process...scrap generated at y process etc..
    So this will be done through creating new movement types
    Regards,
    Rohan

  • PURPOSE OF CREATION OF NEW MOVEMENT TYPE

    Hello Experts,
    Can you please tell me the purpose of creating a new movement type with the description.
    Thanks and Regards
    Nilu S.

    Hi,
    Movement type determines the treatment of any Stock in terms of Qty & Value. SAP has provided the standard MVt type for use in  different business scenario.
    How a Mvt Type Works  is important to understand the requirement of new Mvt type -
    a. in material master we are assigning the Val. Class, We are assigning the GL a/c  with Valuation class in combination with General account modifier in OBYC like GBB >> VBR>> ValClass>> GL A/c.
    b. Each valuation class is linked to multiple General account modifier Key and GL a/c (as per our business requirement).
    c. Each movement type is assigned with Account modifier key in IMG Customising.
    So when ever we enter a material & Mvt type in any transaction system determine the GL A/c to be for Automatic posting through Account modifer Key (From OMJJ & OBYC).
    So you can see, there is limitation of GL assignment for automatic posting in OBYCfor each business scenario.
    if requirement of diff. accounting arises for a material with same valuation class, we need to Create new Mvt type & Account modifier key. This new Account modifier key will be linked to New GL in combination with Val. Class.
    Hope  above explanation satisfy your query.
    Regards,
    Ranjan Kumar

  • Regarding creation of new movement type

    Hi Friends,
         I have tried to create a new movement type for transfer posting from one sloc to another (311) with Z11...but it showing an error
      " Specify the key within the work area "...what is this ? where i can see the work area for this ? the messsage number is  SV033. kindly help me please
    Regards,
    Prasath

    Hi Prasanth,
    This following link will help you.
    Movement Type
    Regards,
    Nani.

  • Creation of new movement type and transaction code

    Hi
    As per my business requirement i want to create new movement type 911 in  1M and how to assign to transaction code MIGO and if possible can some body can guide me with configuration.
    With regards
    G Narendra kumar

    Hi Narendra,
    1 . To copy a movement type,
    select the field Movement type and choose Continue. The dialog box
    Define work area appears.
    2. In the dialog box Define work area, enter the movement type you want
    to copy in the From: field. In the To: field, enter the name of the
    new movement type you want to create. To go to the overview of the
    selected movement types, choose Continue .
    3. Select the movement type you want to copy, and choose Edit -> Copy
    as.
    Overwrite the selected movement type with the new movement type
    (beginning with 9, X, Y, or Z) and copy all dependent entries.
    The system copies all control indicators from the reference movement
    type to the new movement type.
    4. Copy the reversal movement type and enter it in the view
    Reversal/follow-on movement types.
    5. In SE38, execute the program RDDKOR54 and then give the entry T156 as table name and again execute. Check if the entries 9,Y, and Z* are available in the namespace.
    Thanks
    Dipak

  • Creation of new movement type and condition type

    Hi experts,
                       I am going to create a new movement type and the new condition type. Please suggest me how to create and implement it.
    Thanks
    Harmandeep

    Please check these answered links:
    Create a new movement type
    Create Movement Type Error
    When we need to create a new movement type?
    can we a create a  condition type for  PO
    Create new condition type with respective GL acc. for PO
    Re: Condition type

  • GL assignment to the new movement type copied from101(GR of purchase order)

    Dear friends,
    user need another movement type copied from 101 due to diffierent GL assignment needed for the new movement type.
    while below is the only combination for PRD(cost (price) diffierences) is OBYC. and the first row is the current GL assignment for 101.
    My question is :  How do I  assign diffierent GL  for the newly copied movement type ,say Z01.
    General modification       Debit          Credit
                                         530000       530000
    PRA                              530050       530050
    PRF                               530000       530000
    Thanks in advance,
    Linda

    Hi,
    Go to t code OMJJ and locate your movement type Z01. Then go to  Account Grouping on the left pane  and create a new account modifier there. Then give the same account modifier in OBYC settings and assign the GL account against it. 
    Thanks,
    Atal

  • Steps to create new movement types

    Hi Folks,
    I need to create new movement type, please let me know the steps that i need to follow.
    Thanks,
    Regards
    Raghavendra

    Dear
    Please follow the steps in below link and create new Movement type
    http://www.sap-basis-abap.com/sapmm015.htm
    http://help.sap.com/saphelp_40b/helpdata/ru/fc/6cec6eb435d1118b3f0060b03ca329/content.htm
    http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/new-movement-type-1857755
    Regards
    Aamir

  • New movement types required for Consignment

    Hi Friends,
    Need help related to Consignment Movement Type:
    in Fill up Process KB/CF my client wants the goods to be in 'Transit' and then next step to Fillup.
    Similarly in returns, we wanted the goods to be first to be reflected in 'QI' (MMBE/MB58) and then to be moved to consignment stock.
    unline 631/634..are there any movement types that can fix this issue?..if we have to create a new movement type what type can be copied and stored for my client specific requirement.
    Thank you
    Ravi

    1)  my client wants the goods to be in 'Transit'
    2)  WE used standard process
    If the second comment cited above fulfills the first one, can you please let me know how you have achieved this.  To the best of my knowledge, in consignment fillup process, we cannot see the "Stock in Transit".  Once fillup delivery is made via 631 movement type, the unrestricted stock moves to "Cust.consignment".
    thanks
    G. Lakshmipathi

  • Map  new movement type to replace 651+453.

    Dear Experts ,
    While doing pgr we do 651 and then 453 for taking stock into own stock.But if we want to avoid 453.
    How can we update quantity in pgr  with only one movement type ?
    New movement type(???) = (651+453).for pgr of customer returns.

    Hi why don't you use movement type 653 -Returns from customer (Shipping) to unrestricted-use stock
    With this movement type you post returns from the customer with returns delivery via Shipping directly to the valuated stock.
         Possible special stock indicators:
         E, Q
    It will have same effect as 651 +453
    Regards
    Antony

  • Error In Creating New Movement Type

    Hi,
    To upload the Consignee Stock, we have created a new Movement Type, say Z01 & Z02 copying the Movement Type 701 & 702.
    We are able to upload the Stock using Z01 with correct FI Entry.
    While doing the reversal, the following error is encountered:
    The mvt type in the reference docmt cannot be converted
    Message no. MIGO029
    Diagnosis
    You want to post a goods movement but the movement type that you want to use for the posting has not been maintained completely in the system.
    Possible causes are:
    The movement type is not permitted for this transaction.
    No subsequent movement type has been defined.
    You do not have authorization to post a goods movement using this movement type.
    Procedure
    Check your screen and field values.
    If you do not have sufficient authorization, contact your system administrator.
    If a movement type has not been maintained completely, the missing data must be maintained in Customizing for Inventory Management.
    Make the appropriate settings in Customizing as necessary or inform your system administrator.
    Pls. advise what to do?
    Regards,
    P K Karn

    While exploring the Mov Type 701 & 702, I came to know that 702 is not the REVERSAL of 701 as I normally assume, hence I would be wrong if we think of 702 as reversal for 701.
    Also I came to know that reversal is not possible for the documents created thru Physical Inventory i.e. using Mov Type 701.
    Basis the above observations, I can conclude that I am going on a wrong track.
    But still I am not able to find out the solutions.
    I don't to use 501, as it will generate the FI Entries which I don't want.
    Hoping some quick answers from you people.
    Also would like to request to stop me, if my LOGIC is wrong.
    Regards,

Maybe you are looking for