New Movement types (Urgent)
Hi Gurus,
Why do we need new movement types? Could you give few examples?
Helpful answers will be rewarded accordingly.
Thanks
kk
Hi,
new movement types are normally required for accounting reasons and not normally for MM reasons.
One example is the write-off movement type. The standard movement type is linked to the GL that is used by the account modifier allocated to that movement type and so whenever we use the standard write-off (scrap) movement for a material at a plant it will ALWAYS post to the same account (as long as the material and plant are the same).
But what if we want to use a different account for the same material plant combination, depending on WHY we are writing it off?
For example, if we drop the item during the process and damage it ourselves then we want to use a "loss account" that will capture the cost of this accident. But if we open the box and find that the item has been stolen, or was damaged by the vendor, we would wnat to write it off to a different account.
So we could add two new movement types, Write-off (stolen), Write-off (vendors defect) etc.
So basically wherever we want to have extra flexibility over which GL is used in standard situations we can use additional movement types (linked to different account modifiers) to achieve this.
I have not really ever seen a GENUINE need for a totally new movement type for anything other than financial reasons. After all you will not suddenly have a different type of movement in MM, they haev all been covered byu the standard (and if they haven't, then this is probably deliberate).
I did once have to generate a new movement type that would update "in-transit" stock but this was for a very special purpose and it is not one that I would ever recommend.
I hope this helps a bit?
Steve B
Similar Messages
-
MM Change Value String from new Movement Type. (URGENT)
Dear friends ,
We have copied moviment type 501 and we need to change the value string to this movement.
So after copy to 933 and creates value string ZA01 copied from WA01 , which tables should I change to value string of movment type use it ?
We are using ECC 5.0.
Best regards,
AlessandroCould you please tell us what you want to achive with this setting though iam 99% sure that what you told in this thread cannot be done. WE always try to create the new movement types using exisiting movement types. So , transaction key/ Value string are copied over . So, i highly doubt if you can even change those fields as they are defined by SAP and used as part of their code and highly recommends not to attempt to play with them.
If you want, you can check in OMWN and OMJJ to see that they are uneditable..
please let us know what you want to achive with this so that we can try to help you.
Please revert back to us if you have achived in creating a copy of WA01 and also let us know how you did it . Iam just curios.
AH -
Accounting Document for New Movement Type
Good day!
Here's the scenario: I have created a new movement type in SPRO. I just copied from the existing movement type closely related to what I wanted to create. I executed the transaction in MB1C and it went well and generated a Material Document number. When I viewed the Material Document number in MB03, it has no Accounting Document number. Is there any config that i missed? How can I relate this transaction to accounting?
Thank you for your assistance.hi
first check which movement type u have copied .
now check is ur material is valuated for the plant
now in OMJJ go to ur movemnttype and in update control u should have value and quantity update entry
also check if u have used the po as free or if it is initial entry then check ur material master price
hope it hellp
regards
kunal -
Error while creating new Movement Type
All SAP Gurus,
We are creating a new Z movement type by copying the 101 movement type (T code: OMJJ).
But system is not allowing to create a new movement type and giving an error message as 'Specify the key within the work area'.
We are unable to create a new movement type due to this error.
Please help...................
Regards,How did solve the problem
plz let me know
thanks. -
Creation of new movement type for Goods Receipt
Is it possible to create a new movement type same as 101 (goods receipt)? We need to create a separate movement type of 101 for the purpose of separating G/L account to be used for local and importation purchases. Or is there any other way to separate the G/L account for GR of local and importation purchases without creating a new movement type?
You can create new Mvt type by copying Mvt type in OMJJ trxn ..
Please follow the following steps
Check whether you can use the preset movement types.
If not, define new movement types as follows:
1. Once you have carried out the activity, the system displays a dialog
box for field selection. In this, you can restrict the movement
types you work with to various fields. To copy a movement type,
select the field Movement type and choose Continue. The dialog box
Define work area appears.
2. In the dialog box Define work area, enter the movement type you want
to copy in the From: field. In the To: field, enter the name of the
new movement type you want to create. To go to the overview of the
selected movement types, choose Continue.
3. Select the movement type you want to copy, and choose Edit -> Copy
as.
Overwrite the selected movement type with the new movement type
(beginning with 9, X, Y, or Z) and copy all dependent entries.
The system copies all control indicators from the reference movement
type to the new movement type.
4. Check all views for the new movement type and, if necessary, change
the control indicators. Please note that some views have a detail
screen.
5. Copy the reversal movement type and enter it in the view
Reversal/follow-on movement types.
6. Save your settings. -
Hi,
I have a query regarding creation of a new Movement Type.
Is there any specific rule to start creating new Movement Type only with numbers starting with digit 9 or we can consider numbers starting with any digits.
Please clarify this as soon as possible.
Thanks in advance.
Thanks & Regards,
Srinivasa M.S
=91-9910077829Hi,
You can create Movement Type with numbers starting with digit 9 or beginning with Z or X or Y alphabet folllowd by number ( for example: Z01,Z02,Z09 etc)which you can differentiate standard Movement Type with customised Movement Type .
For more check the link:
http://www.sap-img.com/materials/how-to-create-a-new-material-movement-type.htm
Regards,
Biju K -
Error during creation of new movement types
hi frnds,
while creating a new movement type for 311 with z11....in help text tab..it is showing an error..
" Entry HULIST does not exist in TSTC (check entry) "...how do i resolve this.
Regards,
PrasathHey while copying the movement type to another use OMJJ
If any table entry is missing that can be maintained in SM30
Check it out
Regards,
Raman -
What we need creation of new movement type ? when will be used?
Dear guru,
pls clarityHi Sai,
Many a times you want to post value of some transactions to different G/L account for the same material depending on scenarios..like scrap generated at x process...scrap generated at y process etc..
So this will be done through creating new movement types
Regards,
Rohan -
PURPOSE OF CREATION OF NEW MOVEMENT TYPE
Hello Experts,
Can you please tell me the purpose of creating a new movement type with the description.
Thanks and Regards
Nilu S.Hi,
Movement type determines the treatment of any Stock in terms of Qty & Value. SAP has provided the standard MVt type for use in different business scenario.
How a Mvt Type Works is important to understand the requirement of new Mvt type -
a. in material master we are assigning the Val. Class, We are assigning the GL a/c with Valuation class in combination with General account modifier in OBYC like GBB >> VBR>> ValClass>> GL A/c.
b. Each valuation class is linked to multiple General account modifier Key and GL a/c (as per our business requirement).
c. Each movement type is assigned with Account modifier key in IMG Customising.
So when ever we enter a material & Mvt type in any transaction system determine the GL A/c to be for Automatic posting through Account modifer Key (From OMJJ & OBYC).
So you can see, there is limitation of GL assignment for automatic posting in OBYCfor each business scenario.
if requirement of diff. accounting arises for a material with same valuation class, we need to Create new Mvt type & Account modifier key. This new Account modifier key will be linked to New GL in combination with Val. Class.
Hope above explanation satisfy your query.
Regards,
Ranjan Kumar -
Regarding creation of new movement type
Hi Friends,
I have tried to create a new movement type for transfer posting from one sloc to another (311) with Z11...but it showing an error
" Specify the key within the work area "...what is this ? where i can see the work area for this ? the messsage number is SV033. kindly help me please
Regards,
PrasathHi Prasanth,
This following link will help you.
Movement Type
Regards,
Nani. -
Creation of new movement type and transaction code
Hi
As per my business requirement i want to create new movement type 911 in 1M and how to assign to transaction code MIGO and if possible can some body can guide me with configuration.
With regards
G Narendra kumarHi Narendra,
1 . To copy a movement type,
select the field Movement type and choose Continue. The dialog box
Define work area appears.
2. In the dialog box Define work area, enter the movement type you want
to copy in the From: field. In the To: field, enter the name of the
new movement type you want to create. To go to the overview of the
selected movement types, choose Continue .
3. Select the movement type you want to copy, and choose Edit -> Copy
as.
Overwrite the selected movement type with the new movement type
(beginning with 9, X, Y, or Z) and copy all dependent entries.
The system copies all control indicators from the reference movement
type to the new movement type.
4. Copy the reversal movement type and enter it in the view
Reversal/follow-on movement types.
5. In SE38, execute the program RDDKOR54 and then give the entry T156 as table name and again execute. Check if the entries 9,Y, and Z* are available in the namespace.
Thanks
Dipak -
Creation of new movement type and condition type
Hi experts,
I am going to create a new movement type and the new condition type. Please suggest me how to create and implement it.
Thanks
HarmandeepPlease check these answered links:
Create a new movement type
Create Movement Type Error
When we need to create a new movement type?
can we a create a condition type for PO
Create new condition type with respective GL acc. for PO
Re: Condition type -
GL assignment to the new movement type copied from101(GR of purchase order)
Dear friends,
user need another movement type copied from 101 due to diffierent GL assignment needed for the new movement type.
while below is the only combination for PRD(cost (price) diffierences) is OBYC. and the first row is the current GL assignment for 101.
My question is : How do I assign diffierent GL for the newly copied movement type ,say Z01.
General modification Debit Credit
530000 530000
PRA 530050 530050
PRF 530000 530000
Thanks in advance,
LindaHi,
Go to t code OMJJ and locate your movement type Z01. Then go to Account Grouping on the left pane and create a new account modifier there. Then give the same account modifier in OBYC settings and assign the GL account against it.
Thanks,
Atal -
Steps to create new movement types
Hi Folks,
I need to create new movement type, please let me know the steps that i need to follow.
Thanks,
Regards
RaghavendraDear
Please follow the steps in below link and create new Movement type
http://www.sap-basis-abap.com/sapmm015.htm
http://help.sap.com/saphelp_40b/helpdata/ru/fc/6cec6eb435d1118b3f0060b03ca329/content.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/new-movement-type-1857755
Regards
Aamir -
New movement types required for Consignment
Hi Friends,
Need help related to Consignment Movement Type:
in Fill up Process KB/CF my client wants the goods to be in 'Transit' and then next step to Fillup.
Similarly in returns, we wanted the goods to be first to be reflected in 'QI' (MMBE/MB58) and then to be moved to consignment stock.
unline 631/634..are there any movement types that can fix this issue?..if we have to create a new movement type what type can be copied and stored for my client specific requirement.
Thank you
Ravi1) my client wants the goods to be in 'Transit'
2) WE used standard process
If the second comment cited above fulfills the first one, can you please let me know how you have achieved this. To the best of my knowledge, in consignment fillup process, we cannot see the "Stock in Transit". Once fillup delivery is made via 631 movement type, the unrestricted stock moves to "Cust.consignment".
thanks
G. Lakshmipathi
Maybe you are looking for
-
I have had my Note 3 since about 14 months now and have loved it until the last Verizon update. Since the update my reception is very poor / "breaks up" in my shop. This is the same shop I have been working in for 6 YEARS!!! Also when I select a dr
-
I'm using SQL Server Express 2014 and I need to test some queries prior to using them in a full version (I've not decided which to move over to yet). I have a table with an inventory of virtual machines and I need to list the count of them per cluste
-
Dynamic Range Compression for Gam
Hi, all, thanks in advance for any help with this. I've recently acquired an Audigy2 Value card, and the specifications on the website stated that the card could perform Dynamic Range Compression. However, now having it home and looking over the soft
-
Need to download Adobe Premiere Elements 8 replacement
I purchased this product several years ago, but my computer can no longer find it. I cant find a way to contact to contact Adobe directly, and I am not sure which serial number I have is correct.
-
ORA-20001: Unable to create query and update page.
I am using the wizard: Form on a table with report 2 pages. I do not change any of the values when using the wizard (just taking all default values) I created over 10 pages successfully already. When creating the one page, I received this error on cl