New MS BPC V10 implementation - migrate user rights, reports, etc

Hi all,
I am new on BPC but had have already been involved on some other SAP implementations such as BO.
We are trying to move our BPC V10 Microsoft infrastructure from the Partner (who is supporting it) Domain Controller to ours. We decided to start from a new implementation of the BPC server then migrate the environment/models and files thanks to the server manager.
The current BPC is using IPS (with LDAP authentication) as a console management to create users then import them in BPC admin. We would like to simply configure our new BPC implementation with AD authentication straight in BPC without using IPS.
My question is:
Do you think it will be safe to do it that way?
Do you think there could be an issue regarding the user ownership of reports, user right configuration, etc?
Please any advise would be very helpful.
And Thank in advance,
Jawad

Hi Jawad,
I don't know IPS but I can give you some answer about BPC.
" regarding the user ownership of reports" BPC give you just the possibility to create bpf or custom menu where you can put links for specific reports but a smart user can open a report directly from menu "open dynamic template" and execute it.
You can give rights through security e.g. giving to one user the access only for one or some entities, or limiting other dimensions so even if he's able to open a reports not present in his bpf he cannot run it for oter entities or dimension values different from his security rights.
For packages you can insert some specific package in the team folder in this case only member of the team are able to see and execute this package.
Putting packages in company will give the possibility to all the teams/users that have the rights to execute packages to see and launch every package.
There is only a limit for the security, you cannot combine different dimension values to have specific rights, e.g. if you give rights for entity "A" and category "X", and also for Entity "B" and category "Y" you will not give the possibility to write only in category "X" when the user set entity "A", etc. but he will be able to use indiferently both categories and entities.
Regards
     Roberto

Similar Messages

  • When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

    When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

    Hi Jdentremont,
    Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
    the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
    deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
    To troubleshoot your problem, please follow the steps below:
    1.  Navigate to
     “X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
    You should see some photo files in this folder as the following screenshot.
    2. Delete all the files in this folder.
    3. On test PC, delete local cache files.
    %userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
    4. Sign-in Lync with the test account.
    5. Go back to the ABS file share, check if there is any Photo file in the folder.
    Best regards,
    Eric
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • I set up my new computer using the apple ID i always use, and then later migrated all my files from my old mac book to the same new one, but under a different user (same ID). how do i consolidate the two users on my new mac book?

    i set up my new computer using the apple ID i always use, and then later migrated all my files from my old mac book to the same new one, but under a different user (same apple ID). how do i consolidate the two users on my new mac book?

    Well if you use the Finder Go menu to Computer, a window opens up double click on your boot drive and then on Users folder, open the other user folder and open Public and drop your files into DropBox
    When you do this it will copy them and change the permissions and user assigned to it, so log into the other user and place them into your respective normal folders.
    Once you have all your files over and don't need the old user, use System Preferences > Accounts to delete it if you wish, however it's good two Admin accounts on the machine in case something bad happens in the other. Some people for security reasons on use a Standard account for most uses and a emergency Admin account.
    One can still do most Admin things in Standard user.

  • I use migrate assistant to move files from my old pc to the new Mac , but it creates the user account. How can i delete the unwanted user account.

    i use migrate assistant to move files from my old pc to the new Mac , but it creates the user account. How can i delete the unwanted user account.

    Welcome to Apple Support Communities
    That's the classic behaviour after using Migration Assistant and that's normal.
    To transfer the data from the new user account to your old user account, you can follow some steps. Here is all the information you need to do this > https://discussions.apple.com/docs/DOC-5472

  • HT4889 Can I merge the new migrated users files with the admin user on the new mac?

    I used the migration assistant to transfer users, files, apps etc from my MacBook Pro to my new iMac.  I had already set up the desktop with my name as the user. So, during transfer, it created a new user... So, I want the initial user and the new transfer user accounts to be merged. Is this possible? If not, does it matter?
    Thanks.

    It's possible by using the Shared folder to move items into and then into your admin account.
    It can be messy. If it were me I'd do a factory reset and then do the migration in Setup Assistant.
    http://pondini.org/OSX/Transfer.html

  • Cannot migrate users print queues to new print server

    I am needing to move the print queues on users computers to a new print server that I have set up by I am not able to do so. I have over 200 users at the office. I am thinking it is a problem getting to run it on the clients, but not sure where it is failing...
    To start... I have moved the print queues from Server 2003 to Server 2008 R2. The machines are both 64 bit. I was able to export the drivers and the print queues to the new server using the print migrate tool. The names of the printers are the same on both...
    The names of the print servers are different. I added a print queue to a test client and was able to print to it without a problem mapped to the new server, so that's not the problem.
    What I can't do is use the script (see below) to remap the clients to the new server. I have tried and configured the script as a user log on script, configured a group policy and placed my test user in the OU. Rebooted the machine, logged
    on with the test account but the print queues stay the same. I have even tried to run the script locally but still no joy... it runs but the queues stay the same. I used RSOP and see that the script is being applied... I am running Windows 7 Professional.
    I really need to get this resolved as the server is being decommissioned within the month.
    Option Explicit
    Dim from_sv, to_sv, PrinterPath, PrinterName, DefaultPrinterName, DefaultPrinter
    Dim DefaultPrinterServer, SetDefault, key
    Dim spoint, Loop_Counter, scomma
    Dim WshNet, WshShell
    Dim WS_Printers
    DefaultPrinterName = ""
    spoint = 0
    scomma = 0
    SetDefault = 0
    set WshShell = CreateObject("WScript.shell")
    from_sv = "\\srvprint_1" 'This should be the name of the old server.
    to_sv = "\\srvprint_2" 'This should be the name of your new server.
    'Just incase their are no printers and therefor no defauld printer set
    ' this will prevent the script form erroring out.
    On Error Resume Next
    key = "HKCU\Software\Microsoft\Windows NT\CurrentVersion\Windows\Device"
    DefaultPrinter = LCase(WshShell.RegRead (key))
    If Err.Number <> 0 Then
        DefaultPrinterName = ""
    else
    'If the registry read was successful then parse out the printer name so we can 
    ' compare it with each printer later and reset the correct default printer
    ' if one of them matches this one read from the registry.
    spoint = instr(3,DefaultPrinter,"\")+1 
    DefaultPrinterServer = left(DefaultPrinter,spoint-2)
        if lcase(DefaultPrinterServer) = from_sv then
            DefaultPrinterName = mid(DefaultPrinter,spoint,len(DefaultPrinter)-spoint+1)
            scomma = instr(DefaultPrinterName,",")
            DefaultPrinterName = left(DefaultPrinterName,scomma -1)
        end if
    end if
    Set WshNet = CreateObject("WScript.Network")
    Set WS_Printers = WshNet.EnumPrinterConnections
    'You have to step by 2 because only the even numbers will be the print queue's
    ' server and share name. The odd numbers are the printer names.
    For Loop_Counter = 0 To WS_Printers.Count - 1 Step 2
        'Remember the + 1 is to get the full path ie..
    \\your_server\your_printer.
        PrinterPath = lcase(WS_Printers(Loop_Counter + 1))
        'We only want to work with the network printers that are mapped to the original
        ' server, so we check for "\\Your_server".
        if lcase(LEFT(PrinterPath,len(from_sv))) = from_sv then
            'Now we need to parse the PrinterPath to get rhe Printer Name.
            spoint = instr(3,PrinterPath,"\")+1
            PrinterName = mid(PrinterPath,spoint,len(PrinterPath)-spoint+1)
            'Now remove the old printer connection.
            WshNet.RemovePrinterConnection from_sv+"\"+PrinterName
            'and then create the new connection.
            'Do not create c6100
            if lcase(PrinterName) <> "c6100" then
                WshNet.AddWindowsPrinterConnection to_sv+"\"+PrinterName
                'If this printer matches the default printer that we got from the registry then
                ' set it to be the default printer.
                if DefaultPrinterName = PrinterName then
                    WshNet.SetDefaultPrinter to_sv+"\"+PrinterName
                end if
            end if
        end if
    Next
    Set WS_Printers = Nothing
    Set WshNet = Nothing
    Set WshShell = Nothing

    Hi,
    àI added a print
    queue to a test client and was able to print to it without a problem mapped to the new server, so that's not the problem.
    àWhat I can't
    do is use the script (see below) to remap the clients to the new server.
    Based on your description, I understand that you have moved print queues to new print server via print migrate
    tool successfully. However, when use this script (Remap Printer Connections) to re-map Printer Connections, the script seems to not be ran as expected. Meanwhile,
    I noticed that you had ran the script locally. Did you find any error when ran this script?
    On current situation, this issue seems to be more related to this Remap Printer Connections script. I suggest
    that you would post it in
    Official Scripting Guys Forum. I believe we will get a better assistance there.
    If anything I misunderstand or any update, please don’t hesitate to let me know.
    Best regards,
    Justin Gu

  • Migrate user data from SLES10sp3 OES2sp3 to new hardware

    Hi,
    I am trying to migrate user data on a nss volume from a SLES10sp3 and
    OES2sp3 server to new hardware already setup with SLES10sp3 and OES2sp3.
    Authentication and configuration of the data selection is sorted. After
    starting the data transfer I get a message saying the migration failed.
    Below is the error from the log file:
    FATAL -FILESYSTEM:migfiles:Fatal: Cannot migrate source path
    /media/nss/DATA/Users/JohnG/: nbackup: Failed to open dataset
    /media/nss/DATA/Users/JohnG/ for backup
    WARNING - FILESYSTEM:migfiles:Warning: Going to next data set
    ERROR - FILESYSTEM:migfiles:Error: nbackup: (libtsafs.so 6.50.0 291) An
    invalid path was used.
    Regards
    John

    Hi kjhurni,
    I have not setup to get update from the Novell channel as I have an issue
    with connecting to the update channel but I will deal with that later.
    I tried to run a miggui to migrate my data to the new server with SLES10sp3
    and OES2sp3. Below is the entire log file, I have highlighted the error at
    the end of the log file. (Names and addresses have been changed to protect
    the innocent)
    Regards
    John
    2012-01-12 11:15:17,394 INFO - Migration
    Framework:getSourceServerConfigDetails():Finding Source Server eDirectory
    Tree Name using command: ndsstat -h SERVER1
    2012-01-12 11:15:17,474 INFO - MigUtil:ResolvIP:Resolving IP address from
    hostname SERVER1
    2012-01-12 11:15:17,539 INFO - Migration Framework:Getting Source Server
    certificate:Using 10.1.3.1 to retrieve Source Server certificate
    2012-01-12 11:15:17,539 INFO - Migration Framework:Getting Source Server
    certificate:executing command: LC_ALL=en_US.UTF-8 /usr/bin/ruby
    /opt/novell/migration/sbin/getServerCert.rb --server-ip "10.1.3.1"
    --ldap-port 636 --file /opt/novell/migration/plugin/conf/SourceServerCert
    2012-01-12 11:15:20,795 INFO - Migration Framework:Getting Source tree
    certificate:using getSSCert command
    2012-01-12 11:15:20,801 INFO - Migration Framework:Getting Source tree
    certificate:Using 10.1.3.1 to retrieve Source tree certificate
    2012-01-12 11:15:20,801 INFO - Migration Framework:Getting Source tree
    certificate:executing command: LC_ALL=en_US.UTF-8
    /opt/novell/oes-install/util/getSSCert -a "10.1.3.1" -t "TREE_NAME" -u
    "admin.b"
    2012-01-12 11:15:21,087 INFO - Migration
    Framework:MigController:getSourceServerTreeCert(): :Copied certificate to
    /opt/novell/migration/plugin/conf/SourceCert.der
    2012-01-12 11:15:21,127 INFO - Migration
    Framework:importSourceTreeCert():Using 10.1.3.1 to import Source Tree
    certificate
    2012-01-12 11:15:21,127 INFO - Migration Framework:Importing Source Tree
    certificate:Importing certificate to Java keystore
    (/opt/novell/migration/plugin/conf/novellStore.keystore)
    2012-01-12 11:15:21,911 INFO - Migration
    Framework:importSourceTreeCert()eleting existing source tree certificate
    using command: /usr/bin/keytool -delete -noprompt -alias 10.1.3.1 -keystore
    /opt/novell/migration/plugin/conf/novellStore.keystore
    2012-01-12 11:15:21,911 INFO - Migration Framework:importSourceTreeCert():
    command: /usr/bin/keytool -import -alias 10.1.3.1 -file
    /opt/novell/migration/plugin/conf/SourceCert.der -noprompt -keystore
    /opt/novell/migration/plugin/conf/novellStore.keystore
    2012-01-12 11:15:22,577 INFO - Migration Framework:SourceServer
    Authentication:Attempting to Connect to Source with the parameters
    2012-01-12 11:15:22,587 INFO - Migration Framework:SourceServer
    Authentication:Authenticating using LDAP(secure)
    2012-01-12 11:15:23,263 INFO - Migration Framework:SourceServer
    Authentication:Authenticating to the Source Server returned true
    2012-01-12 11:15:23,270 INFO - Migration Framework:SourceServer
    Authenticationetecting the source server version
    2012-01-12 11:15:23,315 INFO - Migration Framework:Authentication:Using SMS
    to validate root password for server 10.1.3.1
    2012-01-12 11:15:23,315 INFO - MigUtils:Authentication:Executing
    command:/opt/novell/sms/bin/nbackup -U root -R 10.1.3.1 -cf
    /var/opt/novell/migration/NewProj5/migsrc.sidf /etc/SuSE-release
    2012-01-12 11:15:37,876 INFO - Migration
    Framework:getTargetServerConfigDetails():Finding Target Server eDirectoty
    Tree Name using command: ndsstat -h 10.1.3.2
    2012-01-12 11:15:37,930 INFO - Migration Framework:Getting Target Server
    certificate:Using 10.1.3.2 to retrieve Target Server certificate
    2012-01-12 11:15:37,930 INFO - Migration Framework:Getting Target Server
    certificate:executing command: LC_ALL=en_US.UTF-8 /usr/bin/ruby
    /opt/novell/migration/sbin/getServerCert.rb --server-ip "10.1.3.2"
    --ldap-port 636 --file /opt/novell/migration/plugin/conf/TargetServerCert
    2012-01-12 11:15:40,115 INFO - Migration
    Framework:getTargetTreeCertificate():Attempting to connect to Target with
    the parameters
    2012-01-12 11:15:40,116 INFO - Migration
    Framework:getTargetTreeCertificate():Copy certificate to
    /opt/novell/migration/plugin/conf/TargetCert.der for CLI usage
    2012-01-12 11:15:40,122 INFO - Migration Framework:Importing Target Tree
    certificate:Attempting to connect to Target with the parameters
    2012-01-12 11:15:40,122 INFO - Migration Framework:Importing Target Tree
    certificate:Importing certificate to Java keystore
    (/opt/novell/migration/plugin/conf/novellStore.keystore)
    2012-01-12 11:15:40,122 INFO - Migration
    Framework:importTargetTreeCert():keytool delete command to be executed to
    delete target tree certificate
    2012-01-12 11:15:40,122 INFO - Migration
    Framework:importTargetTreeCert():Executing command : /usr/bin/keytool
    -delete -noprompt -alias 10.1.3.2 -keystore
    /opt/novell/migration/plugin/conf/novellStore.keystore
    2012-01-12 11:15:40,788 INFO - Migration
    Framework:importTargetTreeCert():Using keytool to delete existing
    alias10.1.3.2
    2012-01-12 11:15:40,789 INFO - Migration
    Framework:importTargetTreeCert():keytool command to be executed to store
    target tree certificate
    2012-01-12 11:15:41,486 INFO - Migration
    Framework:importTargetTreeCert():Return Value true
    2012-01-12 11:15:41,486 INFO - Migration Framework:TargetServer
    Authentication:Attempting to connect to Target with the parameters
    2012-01-12 11:15:41,487 INFO - Migration Framework:TargetServer
    Authentication:Authenticating to the Target Server(secure)
    2012-01-12 11:15:41,550 INFO - Migration Framework:Authentication:Using SMS
    to validate root password for server 10.1.3.2
    2012-01-12 11:15:41,550 INFO - MigUtils:Authentication:Executing
    command:/opt/novell/sms/bin/nbackup -U root -l /etc/SuSE-release
    2012-01-12 11:16:35,254 INFO - FILESYSTEM:migfiles:Validating data from
    source path(s) to target path(s) using migfiles
    2012-01-12 11:16:35,254 INFO - FILESYSTEM:migfiles:Executing command:
    /opt/novell/migration/sbin/migfiles --source-server 10.1.3.1 --verbose
    --source-path "@/var/opt/novell/migration/NewProj5/fs/sourcepaths.in"
    --destination-full-path
    "@/var/opt/novell/migration/NewProj5/fs/targetpaths.in" --precheck
    --progress --progress-interval 1 --source-ldap-port 636
    --delete-file-on-restore-error
    2012-01-12 11:16:35,618 INFO - FILESYSTEM:migfiles:Enter the username (e.g
    cn=admin,o=mycompany)
    2012-01-12 11:16:35,618 INFO - FILESYSTEM:migfiles:for the server 10.1.3.1:
    Enter cn=admin,o=b password:
    2012-01-12 11:16:35,618 INFO - FILESYSTEM:migfiles:Enter the username (e.g
    root)
    2012-01-12 11:16:35,619 INFO - FILESYSTEM:migfiles:for the server 10.1.3.2:
    Enter root password:
    2012-01-12 11:16:39,225 INFO - FILESYSTEM:migfiles:Information: Validation
    for migfiles is done successfully
    2012-01-12 11:16:39,230 INFO - FILESYSTEM:migfiles:
    2012-01-12 11:16:39,230 INFO - FILESYSTEM:migfiles:Successfully validated
    data
    2012-01-12 11:16:39,245 INFO -
    FILESYSTEM:Information:****************Migrating files and/or
    trustees****************
    2012-01-12 11:16:39,246 INFO - FILESYSTEM:migfiles:Migrating data from
    source path(s) to target path(s) using migfiles
    2012-01-12 11:16:39,246 INFO - FILESYSTEM:migfiles:Executing command:
    /opt/novell/migration/sbin/migfiles --source-server 10.1.3.1 --verbose
    --source-path "@/var/opt/novell/migration/NewProj5/fs/sourcepaths.in"
    --destination-full-path
    "@/var/opt/novell/migration/NewProj5/fs/targetpaths.in" --session-file
    "/var/opt/novell/migration/NewProj5/fs/migfiles.session" --progress
    --progress-interval 1 --source-ldap-port 636
    --delete-file-on-restore-error
    2012-01-12 11:16:39,534 INFO - FILESYSTEM:migfiles:Enter the username (e.g
    cn=admin,o=mycompany)
    2012-01-12 11:16:39,534 INFO - FILESYSTEM:migfiles:for the server 10.1.3.1:
    Enter cn=admin,o=b password:
    2012-01-12 11:16:39,534 INFO - FILESYSTEM:migfiles:Enter the username (e.g
    root)
    2012-01-12 11:16:39,534 INFO - FILESYSTEM:migfiles:for the server 10.1.3.2:
    Enter root password:
    2012-01-12 11:16:45,078 INFO - FILESYSTEM:migfiles:Information: nbackup:
    precomputing for displaying progress...
    2012-01-12 11:16:45,157 FATAL - FILESYSTEM:migfiles:Fatal: Cannot migrate
    source path /media/nss/DATA/Users/JohnG/: nbackup: Failed to open dataset
    /media/nss/DATA/Users/JohnG/ for backup
    2012-01-12 11:16:45,167 WARN - FILESYSTEM:migfiles:Warning: Going to next
    data set
    2012-01-12 11:16:45,168 ERROR - FILESYSTEM:migfiles:Error: nbackup:
    (libtsafs.so 6.50.0 291) An invalid path was used.
    2012-01-12 11:16:45,242 FATAL - FILESYSTEM:migfiles:Fatal: nbackup command
    failed to complete
    2012-01-12 11:16:45,246 INFO - FILESYSTEM:migfiles:
    2012-01-12 11:16:45,247 ERROR - FILESYSTEM:migfiles:migfiles command
    failed!
    2012-01-12 11:16:45,247 INFO -
    FILESYSTEM:Information:****************End******** ********

  • Migrated Users can't log in new ones can?

    I hope someone can help me out here. I'm not a full time server admin and must be missing something...
    I'm migrating an old G4 Xserve (10.4.11) to a newer Intel Xserve (10.6.6).
    I got though the migration assistant successfully and the server boots and looks just like the old G4.
    I did note a few glitches like a missing "com.apple.Boot.plist" file and none of the DHCP Static Maps migrated. All other settings, users, groups etc. look like they moved just fine. My data is all there and the folder structure is correct. DNS forward and reverse is working as it should.
    Everything seams like it should be working fine, but not one of my migrated users can login to the server. All of them get the Message, "You are unable to log in to the user account "namehere" at this time. Logging in to the account failed because an error occurred.
    When I created a new "testuser" account with all the same settings, privileges, home folder location, etc and it can login just fine...
    What am I missing here?

    I hope someone can help me out here. I'm not a full time server admin and must be missing something...
    I'm migrating an old G4 Xserve (10.4.11) to a newer Intel Xserve (10.6.6).
    I got though the migration assistant successfully and the server boots and looks just like the old G4.
    I did note a few glitches like a missing "com.apple.Boot.plist" file and none of the DHCP Static Maps migrated. All other settings, users, groups etc. look like they moved just fine. My data is all there and the folder structure is correct. DNS forward and reverse is working as it should.
    Everything seams like it should be working fine, but not one of my migrated users can login to the server. All of them get the Message, "You are unable to log in to the user account "namehere" at this time. Logging in to the account failed because an error occurred.
    When I created a new "testuser" account with all the same settings, privileges, home folder location, etc and it can login just fine...
    What am I missing here?

  • Saving user Interactive Reports in Production, when migrating a new version

    Hi All,
    Interactive Reports allow individual users from creating their own custom reports.
    If I were to migrate a modification to the Application, will these overwrite the user's Reports?
    If it does, is there any way to save the user reports in Production, while we migrate an updated version of the application?
    Thanks.
    Kevin

    Hi,
    This is a very commonly brought up issue. If you keep the same application ID from development to production and don't export the interactive reports from development then they will not be overwritten.
    The original metadata will be used. There is an excellent blog post from Joel Kallman of Oracle on this topic which gives much more detail: http://joelkallman.blogspot.co.uk/2010/07/where-did-my-saved-interactive-reports.html
    I used the methods discussed in the post when I needed to solve this problem.
    Thanks
    Paul

  • New iMac extremely slow following migration (Help  with Etre Check diagnosis)

    Hi gurus,
    New iMac - scheduled for genius bar on Friday but trying to avoid the trip.  Migrated everything over from 2009 macbook pro to 2011 macbook and now 2013 iMac.  I imagine there is a lot of cruft from the repeated migrations and am close to just wiping and migrating from scratch.  I don't know, however, how to get my old mail and other critical settings over.
    Problem is clearly in the user account.  I created a separate admin account and that runs relatively fine.  Is the below user account salvageable? Should I delete all my old permissions?  Any tips would be appreciated.  Thanks for the Etrecheck program,
    Problem description:
    Application hangs and system unresponsive in migrated user account
    EtreCheck version: 2.1.8 (121)
    Report generated February 16, 2015 at 4:48:06 PM PST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (21.5-inch, Late 2013) (Technical Specifications)
        iMac - model: iMac14,1
        1 2.7 GHz Intel Core i5 CPU: 4-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n/ac
    Video Information: ℹ️
        Intel Iris Pro
            iMac 1920 x 1080
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 4:51:57
    Disk Information: ℹ️
        APPLE HDD HTS541010A9E662 disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 999.35 GB (585.74 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        TOSHIBA External USB 3.0 2 TB
            EFI (disk3s1) <not mounted> : 210 MB
            Time Capsule (disk3s2) <not mounted> : 2.00 TB
        Western Digital My Book 1130 2 TB
            EFI (disk1s1) <not mounted> : 210 MB
            ACbook (disk1s2) <not mounted> : 2.00 TB
        Centon DataStick 30.93 GB
            EFI (disk2s1) <not mounted> : 210 MB
            Install OS X Yosemite (disk2s2) /Volumes/Install OS X Yosemite : 30.59 GB (25.27 GB free)
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.Cycling74.driver.Soundflower (1.4.2) [Click for support]
        [not loaded]    com.eltima.ElmediaPlayer.kext (1.58 - SDK 10.4) [Click for support]
        [not loaded]    com.logmein.hamachi (1.0) [Click for support]
        [not loaded]    com.seagate.driver.PowSecDriverCore (5.1.1) [Click for support]
        [not loaded]    com.wdc.driver.1394HP (1.0.7) [Click for support]
        [not loaded]    com.wdc.driver.USBHP (1.0.7) [Click for support]
        [loaded]    net.telestream.driver.TelestreamAudio (1.1.0 - SDK 10.8) [Click for support]
            /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
        [not loaded]    com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) [Click for support]
        [not loaded]    com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) [Click for support]
        [not loaded]    com.seagate.driver.SeagateDriveIcons (5.1.1) [Click for support]
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.accountsd.plist
        [killed]    com.apple.AirPlayUIAgent.plist
        [killed]    com.apple.bird.plist
        [killed]    com.apple.CallHistoryPluginHelper.plist
        [killed]    com.apple.CallHistorySyncHelper.plist
        [killed]    com.apple.cloudd.plist
        [killed]    com.apple.cmfsyncagent.plist
        [killed]    com.apple.coreservices.appleid.authentication.plist
        [killed]    com.apple.coreservices.uiagent.plist
        [killed]    com.apple.iconservices.iconservicesagent.plist
        [killed]    com.apple.Maps.pushdaemon.plist
        [killed]    com.apple.nsurlsessiond.plist
        [killed]    com.apple.pluginkit.pkd.plist
        [killed]    com.apple.recentsd.plist
        [killed]    com.apple.SafariNotificationAgent.plist
        [killed]    com.apple.sbd.plist
        [killed]    com.apple.scopedbookmarkagent.xpc.plist
        [killed]    com.apple.secd.plist
        [killed]    com.apple.secinitd.plist
        [killed]    com.apple.security.cloudkeychainproxy.plist
        [killed]    com.apple.spindump_agent.plist
        [killed]    com.apple.tccd.plist
        [killed]    com.apple.telephonyutilities.callservicesd.plist
        23 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.AssetCacheLocatorService.plist
        [killed]    com.apple.awdd.plist
        [killed]    com.apple.coresymbolicationd.plist
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.diagnosticd.plist
        [killed]    com.apple.GSSCred.plist
        [killed]    com.apple.iconservices.iconservicesagent.plist
        [killed]    com.apple.iconservices.iconservicesd.plist
        [killed]    com.apple.ifdreader.plist
        [killed]    com.apple.MobileFileIntegrity.plist
        [killed]    com.apple.nehelper.plist
        [killed]    com.apple.nsurlsessiond.plist
        [killed]    com.apple.periodic-daily.plist
        [killed]    com.apple.sandboxd.plist
        [killed]    com.apple.secinitd.plist
        [killed]    com.apple.softwareupdate_download_service.plist
        [killed]    com.apple.spindump.plist
        [killed]    com.apple.sysmond.plist
        [killed]    com.apple.systemstatsd.plist
        [killed]    com.apple.tccd.system.plist
        [killed]    com.apple.wdhelper.plist
        [killed]    org.cups.cupsd.plist
        22 processes killed due to memory pressure
    Launch Agents: ℹ️
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [not loaded]    com.maintain.LogOut.plist [Click for support]
        [not loaded]    com.maintain.Restart.plist [Click for support]
        [not loaded]    com.maintain.ShutDown.plist [Click for support]
        [not loaded]    com.maintain.Sleep.plist [Click for support]
        [running]    com.maintain.SystemEvents.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.seagate.SeagateStorageGauge.plist [Click for support]
        [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [running]    com.bombich.ccchelper.plist [Click for support]
        [running]    com.crashplan.engine.plist [Click for support]
        [running]    com.eltima.ElmediaPlayer.daemon.plist [Click for support]
        [failed]    com.google.GoogleML.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.rogueamoeba.hermes.plist [Click for support]
        [failed]    com.vmware.launchd.vmware.plist [Click for support]
        [running]    com.zqueue.servetome-server.plist [Click for support]
        [loaded]    jp.co.canon.MasterInstaller.plist [Click for support]
        [loaded]    net.sourceforge.MonolingualHelper.plist [Click for support]
        [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
    User Launch Agents: ℹ️
        [running]    .dat0598.40e (hidden) [Click for support]
            /usr/bin/osascript /usr/bin/osascript osascript -e tell application "Folder Actions Dispatcher" to tick
        [unknown]    .datdf56.40b (hidden) [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [failed]    com.amazon.cloud-player.plist [Click for support]
        [running]    com.amazon.music.plist [Click for support]
        [running]    com.microsoft.LaunchAgent.SyncServicesAgent.plist [Click for support]
        [running]    com.mlbam.nexdef.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Canon IJ Network Scanner Selector2    UNKNOWN  (missing value)
        Dropbox    Application  (/Applications/Dropbox.app)
        ACbook    UNKNOWN  (missing value)
        CrashPlan menu bar    UNKNOWN  (missing value)
        CrashPlan menu bar    Application  (/Applications/CrashPlan.app/Contents/Helpers/CrashPlan menu bar.app)
        Canon IJ Network Scanner Selector EX    Application  (/Applications/Canon Utilities/IJ Network Scanner Selector EX/Canon IJ Network Scanner Selector EX.app)
        Caffeine    UNKNOWN  (missing value)
    Internet Plug-ins: ℹ️
        EPPEX Plugin: Version: 10.0 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        SlingPlayer: Version: Unknown - SDK 10.8 [Click for support]
        AdobePDFViewer: Version: 9.5.5 [Click for support]
        Leap Web Player: Version: LeapPlayer version 2.0.2f2 [Click for support]
        Unity Web Player: Version: UnityPlayer version 3.5.5f4 - SDK 10.6 [Click for support]
        nppanda3d: Version: Unknown [Click for support]
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
        RealPlayer Plugin: Version: Unknown [Click for support]
        QuickTime Plugin: Version: 7.7.3
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        DivXBrowserPlugin: Version: 1.4 [Click for support]
        Silverlight: Version: 4.0.60129.0 [Click for support]
        CoolirisWebKitPlugin: Version: Unknown [Click for support]
        Google Earth Web Plug-in: Version: 6.0 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Easy-WebPrint EX: Version: 1.0.0 [Click for support]
        o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        Flip4Mac WMV Plugin: Version: 2.3.8.1 [Click for support]
        SharePointBrowserPlugin: Version: 14.4.3 - SDK 10.6 [Click for support]
        ContentUploaderPlugin: Version: 1.2 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
    User internet Plug-ins: ℹ️
        Picasa: Version: 1.0 [Click for support]
    3rd Party Preference Panes: ℹ️
        RCDefaultApp
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
        Java  [Click for support]
        Perian  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: NO - Auto backup turned off
        Volumes being backed up:
            Macintosh HD: Disk size: 999.35 GB Disk used: 413.60 GB
        Destinations:
            Untitled [Local]
            Total size: 0 B
            Total number of backups: 0
            Oldest backup: -
            Last backup: -
            Size of backup disk: Too small
                Backup size 0 B < (Disk used 413.60 GB X 3)
    Top Processes by CPU: ℹ️
            11%    BitdefenderVirusScanner
             7%    WindowServer
             1%    loginwindow
             0%    SystemUIServer
             0%    dpd
    Top Processes by Memory: ℹ️
        94 MB    BitdefenderVirusScanner
        60 MB    Finder
        34 MB    mds_stores
        26 MB    CrashPlanService
        26 MB    WindowServer
    Virtual Memory Information: ℹ️
        34 MB    Free RAM
        1.24 GB    Active RAM
        1.23 GB    Inactive RAM
        1.81 GB    Wired RAM
        37.21 GB    Page-ins
        1.05 GB    Page-outs
    Diagnostics Information: ℹ️
        Feb 16, 2015, 04:30:47 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/BitdefenderVirusScanner_2015-0 2-16-163047_[redacted].crash
        Feb 16, 2015, 02:41:32 PM    /Library/Logs/DiagnosticReports/firefox_2015-02-16-144132_[redacted].hang
        Feb 16, 2015, 02:40:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-02-16-144005_[reda cted].crash
        Feb 16, 2015, 01:21:20 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/BitdefenderVirusScanner_2015-0 2-16-132120_[redacted].crash
        Feb 16, 2015, 11:56:57 AM    /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-16-115657_[redacted].cpu_resource.diag [Click for details]
        Feb 16, 2015, 11:50:54 AM    /Library/Logs/DiagnosticReports/com.zqueue.servetome-server_2015-02-16-115054_[ redacted].crash
        Feb 16, 2015, 11:49:07 AM    Self test - passed
        Feb 16, 2015, 09:55:04 AM    /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-16-095504_[redacted].cpu_resource.diag [Click for details]
        Feb 16, 2015, 09:44:52 AM    /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-16-094452_[redacted].cpu_resource.diag [Click for details]
        Feb 15, 2015, 03:02:01 PM    /Library/Logs/DiagnosticReports/ClamXav_2015-02-15-150201_[redacted].hang
        Feb 15, 2015, 02:58:45 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-02-15-145845_[reda cted].crash
        Feb 15, 2015, 12:35:39 AM    /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-15-003539_[redacted].cpu_resource.diag [Click for details]
        Feb 15, 2015, 12:19:21 AM    /Library/Logs/DiagnosticReports/CrashPlanService_2015-02-15-001921_[redacted].c pu_resource.diag [Click for details]
        Feb 14, 2015, 11:45:36 PM    /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-14-234536_[redacted].cpu_resource.diag [Click for details]
        Feb 14, 2015, 07:00:58 PM    /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-14-190058_[redacted].cpu_resource.diag [Click for details]
        Feb 14, 2015, 03:54:47 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/ClamXav_2015-02-14-155447_[red acted].crash
        Feb 14, 2015, 03:18:24 PM    /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-14-151824_[redacted].cpu_resource.diag [Click for details]

    Everything is included below.  Shortly before I ran the script I disabled folder actions which appeared to have a bunch of redundant and scripts that were taking close to 6-7 gigs of ram,   It'll be interesting to review the below.  Thanks Mr. Davis, you are a major resource, 
    Start time: 09:12:51 02/17/15
    Revision: 1241
    Model Identifier: iMac14,1
    System Version: OS X 10.10.2 (14C109)
    Kernel Version: Darwin 14.1.0
    Time since boot: 7:55
    UID: 501
    USB
        My Book 1130 (Western Digital Technologies, Inc.)
        External USB 3.0 (Toshiba America Info. Systems, Inc.)
        DataStick (Alcor Micro, Corp.)
    Bluetooth
        Apple Magic Mouse
        Apple Wireless Keyboard
    Activity
        CPU: user 18%, system 19%
    CPU usage (%)
        mds (UID 0): 19.5
    I/O wait time (ms/s)
        mds (UID 0): 1156
        mdworker (UID 89): 186
    I/O requests (KiB/s)
        mds (UID 0): 4892
    System errors (per sec)
        mdworker (UID 89, error 2): 158
        mds (UID 0, error 2): 149
        mds (UID 0, error 20): 116
    Trusted certs (user)
        63.197.157.203
    Firewall: On
    Listeners
        kdc: kerberos
        launchd: afpovertcp
        launchd: microsoft-ds
        launchd: printer
        launchd: ssh
    System caches/logs
        1166 MB: /Library/Caches/CrashPlan/42/cpfmf
    Diagnostic reports
        2015-02-14 ClamXav crash
        2015-02-15 ClamXav hang
        2015-02-15 garcon crash
        2015-02-16 BitdefenderVirusScanner crash x2
        2015-02-16 Kernel gpuRestart
        2015-02-16 com.zqueue.servetome-server crash
        2015-02-16 firefox hang
        2015-02-16 garcon crash
    I/O errors
        disk3s2: data underrun 1
        disk1s2: do_jnl_io: strategy err 0x6 2
    Volumes
        disk0s2: /
        disk1s2: /Volumes/Install
        disk3s2: /Volumes/ACbook
        disk2s2: /Volumes/Time
    Kernel log
        Feb 15 09:48:38 warning: loginwindow(73) performed out-of-band resume on ClamXav(2059)
        Feb 15 09:48:38 warning: loginwindow(73) performed out-of-band resume on Console(2347)
        Feb 15 09:48:38 warning: loginwindow(73) performed out-of-band resume on iTunes(2727)
        Feb 15 09:48:43 IOAudioStream[0xffffff802f3abc00]::clipIfNecessary() - Error: counted 1 clip more than one buffer ahead errors.
        Feb 15 14:53:10 warning: loginwindow(73) performed out-of-band resume on ClamXav(2059)
        Feb 15 14:56:36 warning: loginwindow(73) performed out-of-band resume on ClamXav(2059)
        Feb 16 09:39:13 utun_start: ifnet_disable_output returned error 12
        Feb 16 10:07:25 Trying restart GPU ...
        Feb 16 11:43:50 jnl: disk1s2: write_journal_header: error writing the journal header!
        Feb 16 11:43:51 jnl: disk1s2: close: journal 0xffffff802b4daa80, is invalid.  aborting outstanding transactions
        Feb 16 11:51:14 utun_start: ifnet_disable_output returned error 12
        Feb 16 11:57:11 jnl: disk1s2: write_journal_header: error writing the journal header!
        Feb 16 11:57:11 jnl: disk1s2: close: journal 0xffffff8025c1cc20, is invalid.  aborting outstanding transactions
        Feb 16 14:22:43 Limiting closed port RST response from 423 to 250 packets per second
        Feb 16 14:24:06 Limiting closed port RST response from 264 to 250 packets per second
        Feb 16 14:24:28 Limiting closed port RST response from 324 to 250 packets per second
        Feb 16 14:24:42 Limiting closed port RST response from 251 to 250 packets per second
        Feb 17 01:18:41 Sleep failure code 0x00000088 0x14006700
        Feb 17 01:18:41 System was rebooted due to Sleep/Wake failure
        Feb 17 01:18:41 Failed to open swap file 30
        Feb 17 01:18:41 vm_swap_create_file failed @ 19 secs
        Feb 17 01:18:41 USBF:    20.861    AppleUSBHubPort::FatalError - Port 1 of Hub at 0x14800000 reported error 0xe00002ed while doing getting port status (4)
        Feb 17 01:18:41 USBF:    20.861    AppleUSBHubPort::FatalError - Port 1 of Hub at 0x14800000 reported error 0xe00002c0 while doing clearing port feature (2)
        Feb 17 01:19:29 utun_start: ifnet_disable_output returned error 12
        Feb 17 08:10:16 [IOBluetoothHCIController][handleACLPacketTimeout] -- Disconnecting due to device not responding (ACL Packet timed out) for connection handle 0x40
    System log
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:09:31 WindowServer disable_update_timeout: UI updates were forcibly disabled by application "Safari" for over 1.00 seconds. Server has re-enabled them.
        Feb 17 09:09:31 WindowServer WSGetSurfaceInWindow : Invalid surface 687364876 for window 227
        Feb 17 09:09:37 WindowServer disable_update_timeout: UI updates were forcibly disabled by application "Safari" for over 1.00 seconds. Server has re-enabled them.
        Feb 17 09:09:38 WindowServer WSGetSurfaceInWindow : Invalid surface 1046946449 for window 227
    Console log
        Feb 17 07:47:09 nsurlstoraged The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid.  Unable to determine schema version.
        Feb 17 07:47:09 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
        Feb 17 07:47:09 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
        Feb 17 07:47:53 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
        Feb 17 07:47:53 nsurlstoraged The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid.  Unable to determine schema version.
        Feb 17 07:47:53 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
        Feb 17 07:47:53 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
        Feb 17 07:54:18 ReportCrash Invoking spindump for pid=9255 wakeups_rate=757 duration=60 because of excessive wakeups
        Feb 17 07:54:59 ReportCrash Invoking spindump for pid=9269 wakeups_rate=1144 duration=40 because of excessive wakeups
        Feb 17 08:09:53 ReportCrash Invoking spindump for pid=417 wakeups_rate=252 duration=179 because of excessive wakeups
        Feb 17 08:15:34 ReportCrash Invoking spindump for pid=9290 wakeups_rate=203 duration=222 because of excessive wakeups
        Feb 17 08:18:12 ReportCrash Invoking spindump for pid=6328 wakeups_rate=185 duration=244 because of excessive wakeups
        Feb 17 08:28:18 ReportCrash Invoking spindump for pid=9314 wakeups_rate=3955 duration=12 because of excessive wakeups
        Feb 17 08:32:28 ReportCrash Invoking spindump for pid=9321 wakeups_rate=609 duration=74 because of excessive wakeups
        Feb 17 08:36:08 ReportCrash Invoking spindump for pid=9331 wakeups_rate=573 duration=79 because of excessive wakeups
        Feb 17 08:38:36 ReportCrash Invoking spindump for pid=9348 wakeups_rate=1503 duration=30 because of excessive wakeups
        Feb 17 08:41:49 ReportCrash Invoking spindump for pid=9378 wakeups_rate=725 duration=63 because of excessive wakeups
        Feb 17 08:45:39 ReportCrash Invoking spindump for pid=9390 wakeups_rate=398 duration=114 because of excessive wakeups
        Feb 17 08:49:04 ReportCrash Invoking spindump for pid=9420 thread=174222 percent_cpu=63 duration=143 because of excessive cpu utilization
        Feb 17 08:50:57 nsurlstoraged Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
        Feb 17 08:51:18 mdworker Error loading /Applications/GarageBand.app/Contents/Library/Spotlight/GarageBandSpotlightImpo rter.mdimporter/Contents/MacOS/GarageBandSpotlightImporter:  dlopen(/Applications/GarageBand.app/Contents/Library/Spotlight/GarageBandSpotli ghtImporter.mdimporter/Contents/MacOS/GarageBandSpotlightImporter, 262): Library not loaded: @rpath/MAFiles.framework/Versions/A/MAFiles
         Referenced from: /Applications/GarageBand.app/Contents/Library/Spotlight/GarageBandSpotlightImpo rter.mdimporter/Contents/MacOS/GarageBandSpotlightImporter
         Reason: image not found
        Feb 17 08:51:18 mdworker Cannot find function pointer MetadataImporterPluginFactory for factory UUID in CFBundle/CFPlugIn 0x7f8b9870c650 </Applications/GarageBand.app/Contents/Library/Spotlight/GarageBandSpotlightImp orter.mdimporter> (bundle, not loaded)
        Feb 17 09:10:19 nsurlstoraged ERROR: unable to get the receiver data from the DB!
    Loaded kernel extensions
        net.telestream.driver.TelestreamAudio (1.1.0)
    Daemons
        com.adobe.fpsaud
        com.apple.AccountPolicyHelper
        com.apple.CodeSigningHelper
        com.apple.Kerberos.kdc
        - status: 1
        com.apple.MobileFileIntegrity
        com.apple.aelwriter
        com.apple.awdd
        com.apple.cache_delete
        com.apple.cfprefsd.xpc.daemon
        com.apple.coreduetd
        com.apple.coresymbolicationd
        com.apple.ctkd
        com.apple.diagnosticd
        com.apple.dpd
        - status: 75
        com.apple.icloud.findmydeviced
        com.apple.iconservices.iconservicesagent
        com.apple.iconservices.iconservicesd
        com.apple.ifdreader
        com.apple.nehelper
        com.apple.networkd_privileged
        com.apple.nsurlsessiond_privileged
        com.apple.nsurlstoraged
        com.apple.periodic-daily
        com.apple.periodic-weekly
        com.apple.sandboxd
        com.apple.secinitd
        com.apple.softwareupdate_download_service
        com.apple.softwareupdated
        com.apple.spindump
        com.apple.sysmond
        com.apple.systemstatsd
        com.apple.tccd.system
        com.apple.watchdogd
        com.apple.wdhelper
        com.bombich.ccchelper
        com.eltima.ElmediaPlayer.daemon
        com.google.GoogleML
        - status: 1
        com.google.keystone.daemon
        com.microsoft.office.licensing.helper
        com.oracle.java.Helper-Tool
        com.rogueamoeba.hermes
        com.vmware.launchd.vmware
        - status: 78
        com.zqueue.servetome-server
        jp.co.canon.MasterInstaller
        net.sourceforge.MonolingualHelper
        org.cups.cupsd
        org.macosforge.xquartz.privileged_startx
    Agents
        com.adobe.ARM.UUID
        com.amazon.cloud-player
        - status: 78
        com.amazon.music
        com.apple.Safari
        com.apple.photostream-agent
        com.google.keystone.system.agent
        com.maintain.SystemEvents
        com.microsoft.SyncServicesAgent
        com.mlbam.nexdef
        com.oracle.java.Java-Updater
        com.seagate.SeagateStorageGauge.plist
        org.macosforge.xquartz.startx
    User overrides
        com.apple.imagent.monaco
        com.apple.FTMonitor
        com.apple.apsd-ft
    User login items
        iTunesHelper
        - /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
        Canon IJ Network Scanner Selector2
        - missing value
        Dropbox
        - /Applications/Dropbox.app
        ACbook
        - /Volumes/ACbook
        CrashPlan menu bar
        - missing value
        CrashPlan menu bar
        - /Applications/CrashPlan.app/Contents/Helpers/CrashPlan menu bar.app
        Canon IJ Network Scanner Selector EX
        - /Applications/Canon Utilities/IJ Network Scanner Selector EX/Canon IJ Network Scanner Selector EX.app
        Caffeine
        - missing value
    Firefox extensions
        Mozilla Firefox hotfix
        Hide My ***! Web Proxy
        FoxyProxy Standard
        Jesper Staun Hansen
        Torrent Tornado
        Torrent Finder Toolbar
    Widgets
        iStat nano
    iCloud errors
        bird 405
        cloudd 68
        CallHistorySyncHelper 6
        Safari 4
        accountsd 2
    Continuity errors
        lsuseractivityd 8
        Safari 2
    Restricted files: 43
    Lockfiles: 22
    Accessibility
        Keyboard Zoom: On
        Scroll Zoom: On
    Contents of /Library/LaunchAgents/com.maintain.LogOut.plist
        - mod date: Feb  9 20:01:50 2015
        - checksum: 2486542021
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.maintain.LogOut</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/bin/osascript</string>
        <string>-e</string>
        <string>delay 3</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>do shell script &quot;killall Cocktail&quot;</string>
        <string>-e</string>
        <string>end try</string>
        <string>-e</string>
        <string>ignoring application responses</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>tell application &quot;System Events&quot; to log out</string>
        ...and 7 more line(s)
    Contents of /Library/LaunchAgents/com.maintain.Restart.plist
        - mod date: Feb  9 19:55:16 2015
        - checksum: 1856196442
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.maintain.Restart</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/bin/osascript</string>
        <string>-e</string>
        <string>delay 3</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>do shell script &quot;killall Cocktail&quot;</string>
        <string>-e</string>
        <string>end try</string>
        <string>-e</string>
        <string>ignoring application responses</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>tell application &quot;System Events&quot; to restart</string>
        ...and 7 more line(s)
    Contents of /Library/LaunchAgents/com.maintain.ShutDown.plist
        - mod date: Feb  9 19:55:17 2015
        - checksum: 2131448796
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.maintain.ShutDown</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/bin/osascript</string>
        <string>-e</string>
        <string>delay 3</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>do shell script &quot;killall Cocktail&quot;</string>
        <string>-e</string>
        <string>end try</string>
        <string>-e</string>
        <string>ignoring application responses</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>tell application &quot;System Events&quot; to shut down</string>
        ...and 7 more line(s)
    Contents of /Library/LaunchAgents/com.maintain.Sleep.plist
        - mod date: Feb  9 20:01:53 2015
        - checksum: 2684026111
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.maintain.Sleep</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/bin/osascript</string>
        <string>-e</string>
        <string>delay 3</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>do shell script &quot;killall Cocktail&quot;</string>
        <string>-e</string>
        <string>end try</string>
        <string>-e</string>
        <string>ignoring application responses</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>tell application &quot;System Events&quot; to sleep</string>
        ...and 7 more line(s)
    Contents of /Library/LaunchAgents/com.maintain.SystemEvents.plist
        - mod date: Feb  9 19:55:17 2015
        - checksum: 1297325733
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Disabled</key>
        <false/>
        <key>KeepAlive</key>
        <true/>
        <key>Label</key>
        <string>com.maintain.SystemEvents</string>
        <key>ProgramArguments</key>
        <array>
        <string>/System/Library/CoreServices/System Events.app/Contents/MacOS/System Events</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        </dict>
        </plist>
    Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist
        - mod date: Feb  6 15:45:52 2015
        - checksum: 655956191
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.oracle.java.Java-Updater</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
        <string>-bgcheck</string>
        </array>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        <key>StartCalendarInterval</key>
        <dict>
        <key>Hour</key>
        <integer>17</integer>
        <key>Minute</key>
        <integer>49</integer>
        <key>Weekday</key>
        <integer>1</integer>
        </dict>
        </dict>
        ...and 1 more line(s)
    Contents of /Library/LaunchAgents/com.seagate.SeagateStorageGauge.plist
        - mod date: Mar 10 08:38:47 2010
        - checksum: 3262128215
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <!--
           com.seagate.SeagateStorageGauge.plist
           SeagateDiagnostics
           Created by John Brisbin on 3/10/10.
           Copyright 2010 Seagate Technologies LLC.. All rights reserved.
        -->
        <plist version="1.0">
        <dict>
        <key>KeepAlive</key>
        <true/>
        <key>Label</key>
        <string>com.seagate.SeagateStorageGauge.plist</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/Seagate/Seagate Storage Gauge.app/Contents/MacOS/Seagate Storage Gauge</string>
        <string>-doautolnch</string>
        <string>/Library/Application Support/Seagate/Seagate Storage Gauge.app</string>
        </array>
        <key>RunAtLoad</key>
        ...and 3 more line(s)
    Contents of /Library/LaunchDaemons/com.bombich.ccchelper.plist
        - mod date: Feb  6 13:35:20 2015
        - checksum: 495358405
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.bombich.ccchelper</string>
        <key>MachServices</key>
        <dict>
        <key>com.bombich.ccchelper</key>
        <true/>
        </dict>
        <key>Program</key>
        <string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        </dict>
        </plist>
    Contents of /Library/LaunchDaemons/com.crashplan.engine.plist
        - mod date: Jan 10 11:46:36 2015
        - checksum: 757054163
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.crashplan.engine</string>
        <key>UserName</key>
        <string>root</string>
        <key>GroupName</key>
        <string>wheel</string>
        <key>Nice</key>
        <integer>20</integer>
        <key>KeepAlive</key>
        <true/>
        <key>OnDemand</key>
        <false/>
        <key>RunAtLoad</key>
        <true/>
        <key>AbandonProcessGroup</key>
        <true/>
        <key>WorkingDirectory</key>
        <string>/Applications/CrashPlan.app/Contents/Resources/Java</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/CrashPlan.app/Contents/MacOS/CrashPlanService</string>
        ...and 26 more line(s)
    Contents of /Library/LaunchDaemons/com.eltima.ElmediaPlayer.daemon.plist
        - mod date: Oct  9 06:40:45 2012
        - checksum: 1274124936
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Disabled</key>
        <false/>
        <key>KeepAlive</key>
        <false/>
        <key>Label</key>
        <string>com.eltima.ElmediaPlayer.daemon</string>
        <key>LaunchOnlyOnce</key>
        <true/>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/ElmediaPlayer/empdaemon</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        </dict>
        </plist>
    Contents of /Library/LaunchDaemons/com.google.GoogleML.plist
        - mod date: Mar 10 10:19:30 2008
        - checksum: 315725308
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.google.GoogleML</string>
        <key>OnDemand</key>
        <true/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Google/GoogleML/GoogleML.bundle/Contents/MacOS/googleml-modwat ch</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        <key>UserName</key>
        <string>root</string>
        <key>WatchPaths</key>
        <array>
        <string>/Library/Google/GoogleML/Modules</string>
        <string>/Library/Google/GoogleML</string>
        </array>
        </dict>
        </plist>
    Contents of /Library/LaunchDaemons/com.rogueamoeba.hermes.plist
        - mod date: Jul 15 21:05:58 2008
        - checksum: 1539233627
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>GroupName</key>
        <string>wheel</string>
        <key>Label</key>
        <string>com.rogueamoeba.hermes</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/hermes/bin/hermesctl</string>
        <string>update</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>ServiceIPC</key>
        <true/>
        <key>UserName</key>
        <string>root</string>
        <key>WatchPaths</key>
        <array>
        <string>/usr/local/hermes/modules</string>
        </array>
        </dict>
        </plist>
    Contents of /Library/LaunchDaemons/com.vmware.launchd.vmware.plist
        - mod date: Nov  2 16:11:08 2007
        - checksum: 1467462916
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN"
                "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
                <key>Label</key>
                <string>com.vmware.launchd.vmware</string>
                <key>ProgramArguments</key>
                <array>
                        <string>/Library/Application Support/VMware Fusion/boot.sh</string>
                        <string>--start</string>
                </array>
                <key>RunAtLoad</key>
                <true/>
        </dict>
        </plist>
    Contents of /Library/LaunchDaemons/com.zqueue.servetome-server.plist
        - mod date: Sep 22 07:54:14 2014
        - checksum: 1392131937
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>KeepAlive</key>
        <dict>
        <key>PathState</key>
        <dict>
        <key>/Library/Application Support/ServeToMe/incoming/settings.xml</key>
        <true/>
        </dict>
        <key>SuccessfulExit</key>
        <false/>
        </dict>
        <key>Label</key>
        <string>com.zqueue.servetome-server</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/com.zqueue.servetome-server</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>ThrottleInterval</key>
        <integer>5</integer>
        </dict>
        ...and 1 more line(s)
    Contents of /Library/LaunchDaemons/jp.co.canon.MasterInstaller.plist
        - mod date: Nov 11 12:21:11 2014
        - checksum: 4111951265
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>jp.co.canon.MasterInstaller</string>
        <key>Program</key>
        <string>/Library/PrivilegedHelperTools/jp.co.canon.MasterInstaller</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/jp.co.canon.MasterInstaller</string>
        </array>
        <key>ServiceIPC</key>
        <true/>
        <key>Sockets</key>
        <dict>
        <key>MasterSocket</key>
        <dict>
        <key>SockFamily</key>
        <string>Unix</string>
        <key>SockPathMode</key>
        <integer>438</integer>
        <key>SockPathName</key>
        <string>/var/run/jp.co.canon.MasterInstaller.socket</string>
        <key>SockType</key>
        ...and 5 more line(s)
    Contents of /Library/LaunchDaemons/net.sourceforge.MonolingualHelper.plist
        - mod date: Sep 16 12:53:32 2012
        - checksum: 4229206510
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>net.sourceforge.MonolingualHelper</string>
        <key>MachServices</key>
        <dict>
        <key>net.sourceforge.MonolingualHelper</key>
        <true/>
        </dict>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/net.sourceforge.MonolingualHelper</strin g>
        </array>
        </dict>
        </plist>
    Contents of /System/Library/Security/authorization.plist
        - mod date: Jan  7 19:31:13 2015
        - checksum: 2720110640
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>comment</key>
        <string>The name of the requested right is matched against the keys.  An exact match has priority, otherwise the longest match from the start is used. Note that the right will only match wildcard rules (ending in a ".") during this reduction.
        allow rule: this is always allowed
        &lt;key&gt;com.apple.TestApp.benign&lt;/key&gt;
        &lt;string&gt;allow&lt;/string&gt;
        deny rule: this is always denied
        &lt;key&gt;com.apple.TestApp.dangerous&lt;/key&gt;
        &lt;string&gt;deny&lt;/string&gt;
        user rule: successful authentication as a user in the specified group(5) allows the associated right.
        The shared property specifies whether a credential generated on success is shared with other apps (i.e., those in the same "session"). This property defaults to false if not specified.
        The timeout property specifies the maximum age of a (cached/shared) credential accepted for this rule.
        The allow-root property specifies whether a right should be allowed automatically if the requesting process is running with uid == 0.  This defaults to false if not specified.
        See remaining rules for examples.
        </string>
        <key>rights</key>
        <dict>
        <key></key>
        <dict>
        <key>class</key>
        <string>rule</string>
        <key>comment</key>
        ...and 1850 more line(s)
    Contents of /private/etc/authorization.deprecated
        - mod date: Sep 30 13:39:21 2013
        - checksum: 2773682028
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>comment</key>
        <string>The name of the requested right is matched against the keys.  An exact match has priority, otherwise the longest match from the start is used. Note that the right will only match wildcard rules (ending in a ".") during this reduction.
        allow rule: this is always allowed
        &lt;key&gt;com.apple.TestApp.benign&lt;/key&gt;
        &lt;string&gt;allow&lt;/string&gt;
        deny rule: this is always denied
        &lt;key&gt;com.apple.TestApp.dangerous&lt;/key&gt;
        &lt;string&gt;deny&lt;/string&gt;
        user rule: successful authentication as a user in the specified group(5) allows the associated right.
        The shared property specifies whether a credential generated on success is shared with other apps (i.e., those in the same "session"). This property defaults to false if not specified.
        The timeout property specifies the maximum age of a (cached/shared) credential accepted for this rule.
        The allow-root property specifies whether a right should be allowed automatically if the requesting process is running with uid == 0.  This defaults to false if not specified.
        See remaining rules for examples.
        </string>
        <key>rights</key>
        <dict>
        <key></key>
        <dict>
        <key>class</key>
        <string>rule</string>
        <key>comment</key>
        ...and 9729 more line(s)
    Contents of /private/etc/ssh_config
        - mod date: Oct  1 12:06:10 2012
        - checksum: 1281775184
         Host *
           SendEnv LANG LC_*
        Host *
            XAuthLocation /opt/X11/bin/xauth
    Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
        - mod date: Aug 21 15:00:01 2010
        - checksum: 2170691092
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.adobe.ARM.UUID</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Adobe Reader 9/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>12600</integer>
        </dict>
        </plist>
    Contents of Library/LaunchAgents/com.amazon.cloud-player.plist
        - mod date: Feb 22 10:43:22 2014
        - checksum: 2707474481
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>EnableTransactions</key>
        <false/>
        <key>KeepAlive</key>
        <true/>
        <key>Label</key>
        <string>com.amazon.cloud-player</string>
        <key>Program</key>
        <string>/Applications/Amazon Cloud Player.app/Contents/MacOS/Amazon Music Helper</string>
        <key>RunAtLoad</key>
        <true/>
        </dict>
        </plist>
    Contents of Library/LaunchAgents/com.amazon.music.plist
        - mod date: Jan 12 15:51:16 2015
        - checksum: 3668832669
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>EnableTransactions</key>
        <false/>
        <key>KeepAlive</key>
        <true/>
        <key>Label</key>
        <string>com.amazon.music</string>
        <key>Program</key>
        <string>/Applications/Amazon Music.app/Contents/MacOS/Amazon Music Helper</string>
        <key>RunAtLoad</key>
        <true/>
        </dict>
        </plist>
    Contents of Library/LaunchAgents/com.apple.FolderActions.folders.plist
        - mod date: Feb 17 09:08:58 2015
        - checksum: 1189540302
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.apple.FolderActions.folders</string>
        <key>Program</key>
        <string>/usr/bin/osascript</string>
        <key>ProgramArguments</key>
        <array>
        <string>osascript</string>
        <string>-e</string>
        <string>tell application "Folder Actions Dispatcher" to tick</string>
        </array>
        <key>WatchPaths</key>
        <array/>
        </dict>
        </plist>
    Contents of Library/LaunchAgents/com.apple.SafariBookmarksSyncer.plist
        - mod date: Jul 31 12:13:01 2010
        - checksum: 2859079559
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.apple.Safari</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Safari.app/Contents/SafariSyncClient.app/Contents/MacOS/S afariSyncClient</string>
        <string>--sync</string>
        <string>com.apple.Safari</string>
        <string>--entitynames</string>
        <string>com.apple.bookmarks.Bookmark,com.apple.bookmarks.Folder</string>
        </array>
        <key>RunAtLoad</key>
        <false/>
        <key>ThrottleInterval</key>
        <integer>60</integer>
        <key>WatchPaths</key>
        <array>
        <string>/Users/USER/Library/Safari/Bookmarks.plist</string>
        </array>
        </dict>
        ...and 1 more line(s)
    Contents of Library/LaunchAgents/com.microsoft.LaunchAgent.SyncServicesAgent.plist
        - mod date: Feb 17 01:22:03 2015

  • Archive directory user rights?

    Hi all: I recently migrated our GW2014 SP1 server over to new hardware. The migration went smooth and our domain and postoffice seem happy. My users are reporting an 8201 error when starting up their client and I have traced it to a user rights issue with our archive folder on the server. I have given full rights to everyone as a temp measure, but I want to get the proper rights set up. BTW, the archive directory is on an NSS volume.
    So, what are the proper user rights to the archive directory? Thanks much, Chris.

    Hi Chris,
    They need Read, Write, File Scan, Create, Erase, Modify, Delete - all except Access Control and Supervisor.
    Hope that helps.
    Cheers,

  • User Right

    Hi friends,
    i want to apply authorization in my application.
    here i want to difine all pages in a table and difine User right to the pages like
    if i have two option, one is ACCOUNT and Second is Oppourtunity, here i user A Can't create or Insert New record into Account But he can Create or Insert new Oppourtunity .
    please tell me how i can manage user A ,that are insert into Oppourtunity but Not have right to create new Account.
    How to manage All Application pages via table.
    how to implement custom Authentication / Authorisation schemes within their applications.
    How can i do this.
    Edited by: Vedant on Apr 14, 2011 11:06 PM
    Edited by: Vedant on Apr 17, 2011 10:02 PM

    Hi Vedant,
    Please check this thread for it tackled the same issue:
    Enable and disable buttons depends on user login?
    For more details, you can watch this:
    http://www.mandsconsulting.com/oracle-apex-tutorial-10-access-control-part-1-video-training
    http://www.mandsconsulting.com/oracle-apex-tutorial-10-access-control-part-2-video-training
    For Documentation:
    http://download.oracle.com/docs/cd/E14373_01/appdev.32/e13363/acl.htm#CHDEEDJB
    Best Wishes,
    Fateh
    Edited by: Fateh on Apr 17, 2011 10:14 PM

  • BPF an Work Status in BPC v10

    Hi averybody,
    I am working in a project of BPC v10 and i have a question i would like to solve. Specifically i want to know if the new version of SAP BPC allow you to associate a step of the BPF with a change of the work status strictly.
    Does anybody know something concerning this item? Any additional information about new functionalities of BPF and work status?
    Thanks in advance,

    Hi
    You can certainly do that. When you've created a set of work statuses and want to associate the work states to a BPF, you can associate with a setting for Related Action along with the Input you are providing to the suers (scrnsht below). I am not sure you can make it mandatory for the user to change work status setting, but you can allow a change in the work status.

  • Migrated users incorrectly, now permissions problems

    Hi all!
    I purchased a 2011 MBP this year, to replace my 2008 MBP. I attempted to use Migration Assistant, but didn't transfer correctly and now I'm having permissions related problems. I'm assuming they are related, as that is how it sounds from posts I've read in these forums.
    When I used migration assistant, I had already created the same user name on the new MBP. Now that I've read many posts in this forum, I realize I should never have created a user on the new MBP, prior to using migration assistant. Anyway, having trouble with duplicate account names, I believe I reformatted the drive and used the drag and drop method from the old MBP to the new (I can't honestly remember, but I'm pretty sure that's the method I chose). I still created the same user name on both, so perhaps that wasn't a great idea.
    For the most part I didn't notice any problems, until after I purchased and installed MS Office 2011. I would open any Office app and everytime it would require me to go through all opening screens as if it was the first time opening Office, even though it had the serial number and all personal information already. I went through MS tech support and fortunately spoke with a very knowledgeable mac user and we traced it down to a permissions problem. He suggested I delete the user name and use the TestName we had created (which had no problems) At the time, I was in the middle of a large video project and I didn't want to do anything that may cause potential problems with it. I finished the project and began another one immediately. In the new project, I had problems with Premiere Pro not recognizing audio in some, not all, clips. I spent days with Adobe tech support and even sent them a sample file. Fast forward to yesterday; it was once again traced to permissions problems. The clip worked under the root user account we (Adobe tech support and I) created.
    So, my question is what is the best way to proceed? It seems apparent that I have to delete a user or figure out how to repair all permissions at once, since I have found files and repaired a few with the one-at-a-time method. Obviously this is time consuming and I don't have that kind of time.
    Should I delete the username and move things to a new username? If so, what are the best steps to prevent any permissions problems? Or is there a way to repair all file permissions through a command in the terminal?
    I can't honestly say I never had any permission problems with the 2008 MBP before, so if by chance there were permisions problems, or any other user related problems, would they have been introduced to this new MBP?
    Thank you in advance for the help! :-)
    EM

    emerson MEDIA wrote:
     About make a copy of /Users/paisleye into /Users/paislWhy am I doing that? Just for backup? Through the remainder of your post, it sounded as if I would only be accessing /Users/paisleye. Did I mis-read something?
    Exactly -- just for backup.  You may notice I'm a little paranoid -- if you have a Time Machine backup, and a SuperDuper/CarbonCopyCloner bootable clone on an external disk, AND a copy in /Users/paisl -- then you've got 3 backups before you start.  :-)  And when you are done you will have the original of /Users/paisleye in /Users/paisl and the original of /Users/test will still be in /Users/test.
    What should happen with the ordering is this:
    -- if a file is in /Users/test but not in /Users/paisleye, then it will copy over into /Users/paisleye with it's current ownership and permissions, which seem to be right.
    -- if a file is in /Users/paisleye but not in /Users/test, then the copy isn't going to fix anything, but it isn't going to hurt anything more, either.  The step where you set ownership of everything in /Users/paisleye to test:staff might just fix all of those problems.
    -- if a file is in /Users/paisleye AND /Users/test, then if the ownership/permissions are right on one and wrong on the other it's probably /Users/test that's good.  The copy (the long complicated tar command) will copy the /Users/test version and it's permissions/ownership overtop the /Users/paisleye version.  If that's not right, there is a backup in /Users/paisl, and on the TimeMachine, and on the clone.
    What's likely is that you are going to have the occasional weird thing happen with some stray file for months/years.  You can always go back and use chown and/or chmod on an individual file to fix it.  (The -R is the "recursive" flag to do a directory and everything underneath.  Leave it out, and it just does one file at a time.)
    I actually ended up with three different accounts on my machine that belong to "me" and had to do this.  (I bought the machine with free Parallels installed, and MacMall created an account called "user" to install it and I had to clean that up when I got it.)  This is not a terrible thing.  One thing that I would recommend if you get it all done and cleaned up and you are happy -- keep the test account, and keep it as an Administrator; then turn off Administrator on the paisleye account.  Then every time you need to do something Administrator, just give the test username/password.  Every so often you will get software that will refuse to install from a non-priv'd account (looking at you adobe!) so just turn on Fast User Switching and log into the test account and install from there.  It just a lot safer if you are not logged in all of the time with privs...
    And this unix stuff isn't hard to get the hang of.  If you half remember something, you can google it and find oodles of excellent documentation.

  • HT1277 Mail has gone crazy. Header's and messages are mixed up. New Mac Book Pro. Migrated files from Time machine running snow leopard. Reinstall or new computer needed?

    Mail has gone crazy. Header's and messages are mixed up. New Mac Book Pro. Migrated files from Time machine running snow leopard. Reinstall or new computer needed?

    Ok; I'm not sure what you're doing.    36 hours is rather long.  Seems like a new migration.  Not what I intended.
    Here's what I intended: from the newly-migrated and apparently-corrupt environment, create a new user, not related to any existing user, nor any migration-created user, or any other user for that matter.  That is, use  > System Preferences > Users and Groups, authenticate yourself by clicking on the padlock, and then click the + and create a wholly new user.  Then log in under that user and establish the mail access.
    36 hours?  I'm wondering if there's an error or an exceedingly slow network here?  Or a really, really slow disk?  Or a sick backup?  (WiFi isn't the path I'd usually choose, either.)
    Failing the attempted second migration, I'd try a different tactic.  Does your existing (old) system work?   If so, I'd bypass the backup and connect an external (scratch) USB disk drive to the (old) sstem and then boot and use Disk Utility booted from the installer DVD disk or boot and use Disk Utility from the recovery partition or booted from a recovery partition created on some other external storage (details here vary by the OS X version and what hardware you have), and perform a full-disk backup of your original internal disk to (scratch) external storage.  (Make sure you get the source and target disks chosen correctly here; copying the wrong way — from the scratch disk to your existing disk — will clobber your data!)  In esssence, this will clone your existing boot disk.  Then dismount the (formerly-scratch) external disk, transfer it over to the new system, and use it as the source of the migration, by performing a fresh OS X installation on the new system.
    Target Disk Mode is also sometimes an option for accessing the disk for a migration, but that requires the right cable, and requires systems that have the same external connection; newer MacBook Pro systems use Thunderbolt for this, and older systems tend to use FireWire.  And I'm guessing you don't have compatible hardware.
    The details here can and do vary by your OS X versions and your particular Mac systems — if you'll identify the specific models and hardware, somebody might be able to better tailor the above (fairly generic) sequence to your particular configuration.

Maybe you are looking for

  • How do I stop firefox from opening every link I click on in a new window instead of loading it in that window?

    Whenever I click a link to bring me to a game or maybe a different website, it opens it into a new window which keeps certain things from working. == This happened == Every time Firefox opened == I clicked "open in a new window" on a tab so i could h

  • Trigger issues

    Hi guys, I'm having an issue with a trigger but I don't think it's the trigger causing the problem: I have a table called mytable (actual name withheld to protect the innocent) Which has a trigger which inserts into an audit table every time there is

  • Active app is in download folder- What to do?

    While empting trash a notification that skydrive.app was running and could not be deleted.  This app is a startup app.  How can I gracefully get the app moved to the normal application folder?  Thanks Bob

  • Assign varaible a value based on a condition

    How can I assign a conditional numerical value to one variable based on the value of a xml tag. I.e. if it's "company A" assign it 12 if it's "company B" assign it 17. Also be able to use that value later on in the template. Thanks in advance

  • Can't connect Ping to Facebook

    During the initial setup of PIng I was trying to connect it to Facebook but it came back with an error message. I checked the application settings on FB but it wasn't connected. So I went back to iTunes but now I don't have any option to try to conne