New MSI KT3 Ultra 2 Raid Board Install

Hi All
I have Just installed a new KT3 Ultra 2 Raid board and XP 2000+ CPU with 512MB Memory.
Problem is that since I installed this new Board CPU and memory my PC has been playing up a little, Mainly Adobe Premier 6.5 . The audio that I capture will not playback off the time line, but I can hear audio from the timeline on stuff I have downloaded from the web. Also Get weird message boxes pop saying that PC Alert or Fuzzy Logic are already loaded (buggered if I can find Fuzzy logic).
ALso CPU XP2000+ what is the operating speed of this Chip? I thought it was 1.6ghz, on boot up my PC claims it is running at only 1.2ghz.
Am I wright in saying that I need to totally reinstall everything fro scratch including win XP?
(sorry just put new board etc in on old install, slap wrist)
CHeers
Gary

Hi tazman,
It's not quite obvious from your explanation, but did you just install your new mobo, CPU and RAM without reformatting your Hard Drives and reinstalling the o/s?
If so, this is a big no-no. This can cause all sorts of headaches for you and you are lucky that your computer is able to run at all. First things first, backup all of your important data files, then reformat your entire hard drive(s) from scratch, ie fdisk to get rid of all partitions, re-establish your partitions, then format away.
Once this is done, you can reinstall your o/s, your updates, drivers and applications, etc. Not a particularly invigorating job but necessary I'm afraid. It all comes back to the UPnP activities where the o/s and your hardware become very much intertwined. All the best and have fun, :D
All the best,
Dimal.

Similar Messages

MSI - KT3 Ultra-ARU Raid + XP

Hi,
I have just built a new system using the MSI - KT3 Ultra-ARU motherboard and am having issues instaling Windows XP professional.
The system has been set with 2 Maxtor HD on Raid 0 Stipping.
On installing Windows XP and Raid Driver 2.0 that comes with the board, XP continues to load the files needed for setup, while in this process it will have a read/copy error. As much as you retry it will not read. This happens on different files each time I try to install and is not a bad CD.
Any suggestions ?

You can have a look at my hardware below...
Chassis: Antec 1080B (300w PSU / 180w COMBINED)
Mainboard: MSI KT3 Ultra ARU
CPU: AMD Athlon XP 1800+
Display: ABIT Siluro GF4 Ti4200 AGP 4X
DVD/CD-RW Combo: HL-DT-ST RW/DVD GCC-4120B
Floppy: Panasonic 1.44MB
HD: Quantum Fireball Plus/AS 30.0GB UDMA 100
Keyboard: Microsoft Internet Keyboard Pro
Monitor: KDS Visual Sensations VS-190
Mouse: Microsoft USB Wheel Mouse Optical
NICs: 3Com 3C900B / DLink DFE-530TX
RAM: Micron DDR 266MHz (2x256MB DIMMs)
Sound: Avance AC'97 Audio
I've had similar problems where my system becomes very unstable at higher bus speeds. Installing Windows XP simply didn't work very good. However, I have ordered a new PSU today as a solution to this problem. Basically, CPUs and video cards are much more demanding and the more devices you have in your computer the more power you're going to need. I recommend purchasing the Enermax EG465P-VE (FCA) 450W ATX PS. It has a higher amperage rating and will most likely solve your problem.
Check your PSU and your bus speed settings...

MSI KT3 Ultra ARU - Can\'t install W2K !!

I've just bought my first AMD powered rig and I'm not able to install W2K pro. First let me say I'm not a computer novice and have been handling workstation/server hardware/software for years in the Intel world.
The failure happens at different places in the install, with different results.. sometimes while copying files the system freezes.. sometimes in the middle of a copy i get the BlueSOD... sometimes after copying files when booting into Windows 2000 for the first time the system just reboots to a black screen and is unable to find a boot partition... so we start over and the install deletes copied files and begins again.
KT3 Ultra ARU
AMD 2200+
Corsair CMX512-3000C2
Pri IDE M - Seagate ST313021A 13GB
Pri IDE S - Sony CDROM CDU6111-F
Sec IDE M - Asus CDRW 4012-A
Sec IDE S - none
Raid Disabled in Bios
Followed Mr.Steveo's guides for hardware installation, flashing BIOS from 5.4 (kept a copy) to 5.5. No problems.
Followed Mr.Steveo's guide for BIOS settings, using his recommendations to the letter, then after failure changed SRRAM freq: to HCLK+66 for 3000C2 ram... BUT still fails.
Additional detail - I lost my original W2KPro CD, and my copy is not bootable... so I'm creating a 2GB DOS partition and booting with a Win98 boot disk to get to the CD and running WINNT from there.
I've gone through the posts on both the AMDMB and MSI forums and seen some insightful suggestions... but nothing that exactly duplicates by problems. Hopefully one of you bright bulbs will be able to light my way. :D
When I get the BSOD I get different STOP errors:
0x0000000A IRQL_NOT_LESS_OR_EQUAL
(BIOS or Drivers using improper memory address)
0x0000001E KMODE_EXCEPTION_NOT_HANDLED
(A kernel mode process tried to execute an illegal or unknown processor instruction)
HELP !!

Back Rev'd the Bios to 5.4 but that didn't help. Back to the forums...
Bas - Thanks for reminding me of the KISS principle (Keep It Simple Stupid). I had simplified the HW but was still altering the Bios settings to where I know they should be.
WELL - I HAVE SUCCESS !!
In further research, (being new to this - remember?) I also find threads saying that I'm supposed to clear the CMOS/NVRAM using a motherboard jumper before powering up the board for the first time and after changing processors. I don't know how accurate that is - maybe someone will be kind enough to elaborate.
I've asked Mr.Steveo in the AMDMB forums if he thinks this step needs to be included in his hardware installation guide. I followed it religiously in my install and it doesn't mention doing this.
Anyway, I got the OS installed. After that, I went back into the Bios and added all suggested settings. I'm getting "2200+" in the boot screens and in the OS.
Now lets finish the install and see if we remain stable. After several days of burnin, I'll OC some to see what I can get.
Thanks Guys!!

MSI KT3 ultra aru Western Digital 200GB raid problem

Hi!
This is what I've got.
KT3 Ultra-ARU (MS-6380E)
AMD 2000+
256 MB 333mhz RAM (AMD Compatible)
Seagate ST330630A 30GB (an old drive)
Maxtor 6L080J4 80GB
Maxtor DiamondMax Plus9 6Y080L0 80Gb 7200rpm 2Mb UDMA133 Fluid IDE
Western Digital Caviar WD1800JB 180Gb 7200rpm Special Edition UDMA100 IDE
Western Digital Caviar WD2000JB 200Gb 7200rpm Special Edition UDMA100 IDE
Promise 100 IDE-controller
Creative Geforce MX 440
Lite-on LTR-40125W
NEC ND-1300 DVD
And the configuration:
IDE1: Seagate (Master)
IDE2: WD1800BG (Cabel Select)
IDE3(Raid1): Maxtor 6LO80J4 (Master) and Maxtor 6Y080L0 (Slave) raided as an single drive
IDE4(Raid2): WD2000JB (Cable Select)
IDE5(IDE-controller1):
IDE6(IDE-controller2): NEC ND-1300 (Master) and Lite-on LTR-40125W (Slave)
And the Software:
I've updated all the software drivers so I've got the newest and I'm currently runnign Win2k SP3 with almost every patch installed on it.
And finally the problem:
When I've hook my WD2000JB to the on-board raid everything seems to be working normaly. The bios finds the drive and makes a new array. Win2k boots up and finds the drive and I can create an partition. But when I've try to format it it the computer starts to freeze for a while and then acts like normal again. The HDD-led blinks as it should during the "normal" time, but when the comp. freezes it stops blinking. The formatation stops at 7% and the HDD-led stops lighting. I don't get an error eventhough it was several hours since it stoped. And the formatation takes like 30min for 1%.
When I connect the WD2000JB to the IDE3 I can format it and it acts just like normal. I even did a full system test with the System tool found on Western Digitals support site and it didn't find any errors. But when move it to the raid-IDE the errors return. I've get Error reading / writing to disk and when I've did a chkdsk I've got the "Coudn't use Device) so I did a scandisk and it found very very many errors so it completly ereased everything that was on it.
And when I've run Western Digitals program again i've get an error (Disk error read/writing) error code: 0113.
Can it be that the Western Disk doesn't work well with Raid? I've haven't heard anything about that, so...
Best regars,
Mathias

You can have a look at my hardware below...
Chassis: Antec 1080B (300w PSU / 180w COMBINED)
Mainboard: MSI KT3 Ultra ARU
CPU: AMD Athlon XP 1800+
Display: ABIT Siluro GF4 Ti4200 AGP 4X
DVD/CD-RW Combo: HL-DT-ST RW/DVD GCC-4120B
Floppy: Panasonic 1.44MB
HD: Quantum Fireball Plus/AS 30.0GB UDMA 100
Keyboard: Microsoft Internet Keyboard Pro
Monitor: KDS Visual Sensations VS-190
Mouse: Microsoft USB Wheel Mouse Optical
NICs: 3Com 3C900B / DLink DFE-530TX
RAM: Micron DDR 266MHz (2x256MB DIMMs)
Sound: Avance AC'97 Audio
I've had similar problems where my system becomes very unstable at higher bus speeds. Installing Windows XP simply didn't work very good. However, I have ordered a new PSU today as a solution to this problem. Basically, CPUs and video cards are much more demanding and the more devices you have in your computer the more power you're going to need. I recommend purchasing the Enermax EG465P-VE (FCA) 450W ATX PS. It has a higher amperage rating and will most likely solve your problem.
Check your PSU and your bus speed settings...

MSI KT3 Ultra-ARU video lock-ups

Hello,
I have a 3 month old MSI KT3 Ultra-ARU. I am running Windows XP Professional and I am having a periodic lock-up where the screen will show blinking colored blocks and the system will freeze. Sometimes just hitting reset will cure the problem. Other times, hitting reset will create two vertical stripes of colored blocks scrolling down the screen. I have used the board on two entirely separate systems (One with AMD Athlon 2000+, Gainward GeForce 4200, 512 MB Samsung 2700 DDR, Western Digital Expert HD (tried both IDE #1 and RAID controller) (Other System, Athlon 1800+, a different Gainward Geforce 4200, 256 Crucial 2700 DDR, an older Maxtor hard drive). In either system, every once in a while, the system will freeze as described above (it has happened in Netscape 7.0, Microsoft Word 2000, America's Army game).
I have played around with the bios settings, reformatted hard drives, tried various revisions of the nvidia display drivers, swapped out video cards, etc. Any ideas? Do I have a bad board? Do I need to flash the BIOS? If the board is bad, what do I need to do to return it?
Thanks,
Matt Gumaer

The second system has a 330 watt enermax power supply. With the new system I put together, I put virtually the same board (MSI KT3 Ultra 2 with bluetooth and RAID), everything is the same as my first system (except the KT3 Ultra-ARU) and the stability is fine. So, I'm reasonably confident its not the power supply.

Broken component on MSI KT3 Ultra-ARU mainboard.

Hi Everyone,
A friend of mine has an MSI mainboard which has a broken component due to his screwdriver slipping off the CPU clamp while installing a new CPU.
The mainboard is an MSI KT3 Ultra-ARU (MS-6380E) ATX Revision 1.0
The broken component is next to the CPU socket (between the CPU socket and the chipset fan) and is labelled L14 on the mainboard.
I believe it is a Ferrite bead inductor/choke.
We have been unable to find the broken part and would like to replace it. I can fit a new component if I can find out the value of the broken inductor/choke in millihenries or microhenries or picohenries.
Would someone with an - MSI KT3 Ultra-ARU (MS-6380E) ATX Revision 1.0 - mainboard, please take a look at the component labelled L14 and let me know what the numbers on that particular component are?
You will probably need a magnifying glass to do this, unless your eyes are very good!
If you know the value of this component, please help!
I would welcome any information on this, it's a shame to scrap a mainboard because of a component costing only a few cents/pence.
Thanks in advance to anyone who helps on this, I appreciate you taking time and trouble to help.
Dave - needtoknow.

Hi Bas,
I got the part I needed but not from MSI, they would not sell me one, so I went to a USA company called Mouser Electronics.
http://www.mouser.com/
The part cost me only 34 cents US, shipping was $6.00! So for about £4.00 UK I can fix the board. Better than £20.00 by far.
You can order even very small parts from mouser as a one off, something you can't do with most UK companies. Their range of stock is *huge*.
Thank you very much for getting the info about the part from MSI for me. I could not have repaired it if you had not helped me with that, so I owe you.
Dave, needtoknow.

MSI KT3 Ultra-ARU error

Hi everyone, my motherbord is giving me the 8 or 9 beep code
(8 = Display memory Read/Write test failure, 9 = ROM BIOS checksum failure) guess I need a new motherbord?
I have a MSI KT3 Ultra-ARU and it has Promise 20276 (raid 0 and 1)
The beeping started after I did a clean install of winxp then a blue screen of death pop-up, when it boot up there was a blank screen then starts to beep
I Strip the system down to RAM, processor and video card only and even change the agp video card to a pci
and clear the bios by change the jumper and taking out the battery
any idea what it could be?

Neither processor or memory is supported. The processor is 166x2 (333) MHz. http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=11&kind=1
Edition: I would like that PSU!! - Eh, now that the processor wont work... Do you still have need for your PSU?
http://www.extremeoverclocking.com/reviews/cases/Ultra_X-Connect_1.html

MSI KT3 Ultra ARU Startup Trouble

I am running an MSI KT3 Ultra ARU Mainboard with an amd athlon xp 1500+ processor, a GeForce4 Ti4200 made by Gainward (64mb), two AOC 120MM case fans, one 80mm case fan, a thermaltake volcano 7 speed variable Heatsink, two crucial 512MB pc2100 DDR Ram Chips a sony 16x12x40x cdrw and an LG 16x dvd rom, as well as a 20gig tape drive by HP and floppy drive. The hard drive is a maxtor diamondmax 60GB. all this powerd by an Antec 350W PSU.
Specs over with, heres the problem
I can only boot from floppy disk. Booting from the hard disk gives me an "Error Loading Operating System" error, I have tried two other drives and both of these drives have OS's on them, winnt4 and winxp respectively. The Maxtor drive is clean but not new, I am formatting it as we speak to see if that works. I have tried to boot from a bootable win2k cd on two different CDRW drives as well as an old CD Rom drive, and a DVD rom drive. I always get this error "Searching for Boot Record from CD.....None Found" proceeded by the "Error Loading Operating System" error. I am running everything off the three IDE plugs, with round IDE cable(I have tried flat ones, no luck with those either) I am not attempting to run this in a RAID array at all.
Anyone got any ideas as to why this problem would be occuring????

hi nailz,
Hope this may solve your problem. In the BIOS, Advanced BIOS Features, set "Boot Sequency" 1st, 2nd, 3rd boot devices to the SAME one, ie Floppy for all, or 1st Master HDD for all. Then reboot. Disable "Try boot device' first. Repeat this until you get the board to boot the device.
If can't,
Clear the CMOS and retry.
If can't,
(In the BIOS) select all IDE devices and set to NONE. Set "Clear NVRAM" in PCI Configuration. Save and exit the BIOS, then re-entering BIOS in the next boot, enable all IDE devices. Save and exit, re-enter BIOS once more, check the "Boot Sequence".
Yup... try changing around with IDE settings in the BIOS. Good luck.

[VIA] MSI KT3 Ultra-ARU and a MSI FX5900XT 128MB DDR Video Card

Does any body out there know if a MSI KT3 Ultra-ARU and a MSI FX5900XT 128MB DDR Video Card will work well together?

like the grayone say, is true. for more ensure, try and search the graphic cards support list for your board at MSI (Sorry cause i don,t no is where the site located)
in my opinion, most is compability for your card, when is a AGP slot.
Except the new one like the AGP slot, call AGR( Accelaration Graphic Riser slot) that really need to find a compatibility graphic cards.....

MSI KT3 Ultra ARU 5.7 BIOS and SoudBlaster Cards - Audigy

I have flashed my BIOS to 5.7 Version and my sound card start to make a lot of noise (crackling) when play AC3 or DVD. If you dont want to use the new AMD CPU 333 FSB you dont need to flash the BIOS - I have Flashed to 5.6 again but, if you want to use a 333 FSB CPU you can flash the BIOS to version 5.7 and if have sound problems use the PCI latency patch for VIA chipsets.
VIA chipset MotherBoard owners who have through all of the above and still have sound problems with their Soundblaster cards, might want to look into the PCI latency patch for VIA chipsets - get it here:
http://www.georgebreese.com/net/software/
(scroll down the page there just a little to get to it).
There's also a similar page about resolving sound problems on Via chipset based computers here:
http://www.deinmeister.de/mvp3_zlt_e.htm
I hope this post help somebody
Mário Silva from Beja - Portugal
My System:
MSI KT3 Ultra ARU
Athlon 2400+
512 Kingston PC2700 DDR SDRAM
MSI Geforce4 Ti 4200
SoundBlaster Audigy
Windows xp Pro SP1
400W PSU
Creative Drx3
Pinnacle PCTV pro
HDD Maxtor 80 GB UDMA 133
DVD Pioneer slot in
RW Samsung 48x16x48
Creative WebCam Go
UPS 500 VA
Monitor Sony 19" E400E

Since my chip is an unlocked, I cannot easily run it at the default, but I can underclock it. At 100x6.0=600mhz, USB does not work, as well as 100x12.5. Same with 133x6.0 and 133x12.5. It appears to make no difference underclocking or overclocking.
I downloaded the right BIOS listed on MSI's KT3 Ultra-ARU page. I don't think the BIOSes are different anyway, since the same files, changelog, and etc are also listed for the Ultra-2 board.
A thing to note, that this is the onboard VIA-controller USB ports doing this. My Ultra-ARU's NEC-controller USB 2.0 ports work fine in both Win2k and Linux if I hook my mouse and keyboard up in those. This is not an ideal solution for me though.

MSI KT3 Ultra ARU Mem timing problems?

As experienced by myself as well as Maximum PC Magazine during testing. Using high quality memory such as Samsung PC2700 DDR on the MSI KT3 Ultra ARU, if you set the cas latency timings to the most agressive settings, next time you try to boot into Windows, your OS crashes and the registry gets corrupted. Also the board actually interprets CAS 2.5 memory as CAS 2. I am sure a BIOS update will fix this problem, however who else has had this problems?

Quote
Originally posted by bikernut
Hi MSI MAN
I to have top quality ram, but my board reads the CAS settings correctly.
not for sure what the difference is between xtreme memory modules and,i guess,plain memory modules.installing samsung pc3200 256 ddr into msi kt3 ultra2,was wondering if you have had any compatability problems with your type of memory.have posted to three different forums with no results.

Msi kt3 ultra aru ... Cnet pro200 Ethernet problem..

Hi guys
i have this wierd problem i cant figuer out
i just bought a new mobo an msi kt3 ultra aru and amd palamino xp 1800 512 mb kingston pc2700 ram
asus geforce (2) v7100 pro mx-400
the ohter stuff i have is imb deskstar 40gb maxtor diamond 7gb asus dvd and plextor 12/10/32 cd writer
the only pci card i have installed is Cnet pro 200 100/10Mbps Ethernet adapter..
i made a clean install whit winxp pro and i have installed the 5.40 bios and the new 4 in 1 from via and newest nvidia graphics driver
and im on broadband using a cable modem (dialup)
the problem is when i start the computer and windows is loadet i takes up to 30 - 45 sec before i can connect to the internet and proggys like virus protectors and firewalls also after 30 - 45 sec
but if i take the r45 cable out of the modem and start the computer it loads everything in a sec
then i plug the cable in a agin and i have acces to the internet
i have followed mr stevo and racerx27 bios settings
is there any one out there
who have a solution to my problem?
if so then i can be reached at [email protected]

Think your network (TCP/IP) settings are wrong in some way..

MSI KT3 Ultra ARU and S2K Bus Disconnect

Hello
I have a MSI KT3 Ultra ARU and a AMD Athlon XP 2600+ (266 FSB version). I wonder if I have support for termal diode in both CPU and mainboard.
Is S2K Bus Disconnect and CPU HALT Command detection the same thing?

Quote
KT3 ultra's I believe were the first boards capable of reading thermal diode inside of AMD XP (Palamino/T-bred/barton, etc) and higher cores.
Not the first, but they were up there as being among the first. A few KT266 boards implemented the circuitry to read thermal diode. Second or third revision boards, or new models, based on KT266A and even KM266 began implementing the thermal diode circuitry.
KT3 Ultra has thermal diode read circuit:
Quote
MSI™ KT3 Ultra...can support AMD Athlon™ XP 2000+ processors, AMD Athlon™ and Duron™ plus it latest technology feature - Thermal Diode Circuit.
- MSI Press Release

Msi kt3 ultra, msi gf4 4200 tvout problem

I have a msi gf4 4200 64mb card and i have a msi kt3 ultra aru and windows xp,
my problem is tv out is garbled in pal , ntsc is grey (iam in europe), the colours seem inverted blues are red, etc and theres a ghosting effect around moving images like in videos or around the cursor
Ive tried everything from default mem setting , to high performance , tried diferent driver sets , tried windows 2000, tried via chipset drivers, latest msi, nvidia gf drivers, pal b , g , i , 60hz, diferent resolutions, clone view, single output to tv, stretch view , nothing seems to fix it, the only thing that comes close to fixing it is using the tvtool http://tvtool.info/ with color fix correction activated, but the images isnt stable its got a weird strecthing, shimmering effect on the bottom half of the tv image
Iam sure that the problem is not tv or cable related because i tried a friends p4 (board msi sis 645dx) with the exact same model gf4 4200 (not my one) with my scart cable and tv set up and it worked fine.
Could it be a voltage problem? ive even tried upping agp and core voltage a bit to see if helps, and nothing

mhuizing,
nope havent tried a diferent tv , but it should work , i tested the connection with a friends computer
exact same gfx card model and it worked fine!
My old system leadtek gf3 ti200 , epox 8kha+ worked fine with this connection.
Iam using a scart cable to a video , then from the vid to the tv via antena cable
i upgraded and voila, i got some headaches for free :P !!!

Anyone using BlueTooth with MSI KT3 Ultra-Aru?

Has anyone setup BlueTooth PC to PC network with the MSI KT3 Ultra-Aru?
Where can one get the transmitter? (assuming it works)

Quote
Originally posted by cje1985
i have a kt3 ultra aru it says it has blue tooth and on the usb 2.0 dongle it says do not remove if you use bluetooth but when i follow the manual to plug it in windows or the software finds the bluetooth connection
Hi,
I have a KT3 Ultra ARU too, and I understand that if you use the onboard Bluetooth connection you must not use the USB connection under the blue sticker at the same time.
I think it's because the onboard Bluetooth connection and the USB connection under the sticker use the same adress (IRQ). So as long as you have no Bluetooth, like me, you can use the 4 USB connections. If you use Bluetooth connection on board, do not use the USB connection under the sticker (the left one seen from backside of your PC).
If you use an external Bluetooth it's not a problem with your 4 USB connections.
ralcan

New MSI KT3 Ultra 2 Raid Board Install

Similar Messages

Maybe you are looking for