New MSI KT6 Delta - No Post

Hey everyone.....
I don't know if you guys remember but my last posts were largely about how much I hate computers....well the feeling is getting stronger.
I just got a new used MSI KT6 Delta mb and I hooked everything up but when I turn it on it just starts the fans and nothing else.
I can test the cpu and psu pretty easy 2marrow....but Im pretty sure this mb is good...unless the guy lied, and the reason I got this one is cause my last computer(old mb) would just sit at 39 minutes once it reached the graphical part of the xp install (and Im definite the cd was perfect)...so I'd assume everything else was working except my old mb......so......was I wrong...could have been something else
could it be something else this time?
I've reset the bios (which are supposely updated), I've tried my other graphics card and I'm out of ideas....
Im in a rush but I wanted to get some ideas asap.
I figure it can't be any other hardware besides my mb or gc but incase
I've got in it now - 128mb of generic PC2100
1800 XP Athlon
and my ti4400
nothing else....I also just got some cheap powersupply so maybe its causing the problems but I don't have any money....
Thanks for the help
Edit/Delete Message

Good search !
jonwon29: "...Send it back dont even spend anymore time or money messing..." But you spend your time posting against KT6 Mobo, and you can see that you are wrong.

Similar Messages

Sata on the MSI-KT6 DELTA LSR

Hello
Can someone tell me if i can run 1 sata disc with windows XP and no ide hdd wil this work on my MSI-KT6 DELTA LSR motherboard.
Or do i need to do it in raid
Greetz sjoerd

It's possible. There's one person who's had problems and there's others that say they can. The FAQ on the ASUS KT600 board says you can on XP (not sure about me or 98), so accroding to them the 8237 bridge should be able to. I'll paste the Asus steps which should be about the same. You need to up date your bios to the one ending in .52 (for MSI). Via has some newer drivers posted Sept 22nd ...maybe go with them at link below and follow the asus steps for 1 HD. Post back if it works. I'd use XP with SP1 incorporated. I'm not saying the answer to your question is a definite "yes".
ASUS FAQ site:
I have only one HDD, but it's SATA HDD. Can I use it to install Windows XP on A7V600 without building RAID?
Yes, you can install Windows XP with one SATA HDD on A7V600.
Please first copy the driver from A7V600 support CD \Drivers\VIARAID\DriverDisk\SATA\*.* into root directory of floppy disk.
(i.e. root directory of floppy disk should contain \pide and \sata folders, txtsetup.oem and vt6420 files.)
Then, boot system by Windows XP installation CD, when the below message show up, press "F6".
"Press F6 if you need to install a third party SCSI or RAID driver"
Then, press "S" to specify additional device when next screen show up. Put the driver floppy disk you made and press enter to continue.
(If the floppy disk is made successfully, the installation program will ask for selecting driver. Please then select "VIA Serial ATA RAID Controller(Windows XP)".)
After SATA driver loaded and Windows XP can recognize SATA HDD, you can continue to install Windows XP as usual.
(If the driver is selected successfully, but the installation program cannot find your hard drive. Please check whether the hard drive is connected correctly both SATA cable and power cable.)
Via has some new Sep 22nd drivers (you might try those) and in the notes it says it does JBOD along with RAID.
http://www.viaarena.com/?PageID=310

MSI KT6 Delta wont boot

My MSI KT6 Delta system no longer boots any further than the memory test? why? any ideas? any solutions other than replacing the motherboard etc.
some background:
motherboard: MSI KT6 Delta
CPU: AMD Athlon XP 2800
Memory: 1Gb branded
Graphics: Geforce FX 5200 AGP
PSU: Antec TrueBlue 480
Screen displays the memory test then a message relating to BIOS setup i.e. "Del: BIOS Setup" plus a new option i dont remember seeing previously namely "F10: Flash recovery" btw pressing 'del' doesn't help you cant get into the BIOS setup. Having cleared the CMOS via JBAT1 i now just get the MSI Welcome screen. If it helps the D-Bracket displays a red led top left.
its all a bit odd really, everything was fine on Friday night, but come Saturday morning its all gone pear shaped.
any help appreciate

OK. Well, the procesor is where I'd start troubleshooting.
Step one would be to unplug power cable and other cables on the back of the computer, wait a while ( you'll hear a faint zzipp ), and then move JBAT jumper in order to clear CMOS. That will force you into BIOS.
Eh, thought of something. BIOS will stop sometimes if it can't find a keyboard. And you say entering BIOS is impossible. Perhaps you have more than one problem? a) processor's BIOS settings are impossible, b) the keyboard hinders you from entering BIOS. However, the CMOS clearing should in either case be a good start.
Your problem very much reminds of what happened to me and others while playing with CoreCenter. I know you didn't but can't help saying so.

MSI KT6 Delta PROBLEM

First, my hardware :
Everything running @ default speed & settings.
AMD XP 2700+ (running @ about 47C idle and about 55C in work)
MSI KT6 Delta (v2) with latest bios
512mb DDR (333) CL2.5 Elixir
Seagate S-ATA ST380013 (80gb), with WinXP Pro (SP1) installed
Samsung SP1203N (120gb), as primary master on IDE1
Samsung 52/32/52x CD-RW, as secondary master on IDE2
Connect3D Radeon 9600 128mb
PSU Antec TruePower 380w:
+5V 35A
-5V 0.5A
+12V 18A
-12V 1.0A
+3.3V 28.0A
+5VSB 2.0A
I keep getting some strange BSOD. No matter what I do with the machine. Windows locks up completely and after about 1min, that BSOD comes and machine boots.
( http://www.saniainen.com/bs.jpg )
In normal usage, it comes about 1-3 times/day.
Mostly it comes when I copy some files from disk to other.
But it comes everytime when I try to decompress big (over 400mb) ZIP-files.
Everything did work with my old board, MSI KT4A. The problems begun when i changed the motherboard and added the Seagate S-ATA hdd.
I have ordered new memory, Kingston HyperX 512mb (333). Could it be memory-related or something with S-ATA ????
I have tried everything, latest BIOS, latest VIA4in1, memchecks etc...

I had the same problem on a differnt mobo and all I did to fix it was switch the IDE cables around on the devices.
?Give it a try?
It may be a jumper you forgot to change on the IDE devices.

MSI KT6 Delta-L sound problems

Hi, I have an annoying problem. My sound gets disorted and after one or two seconds I get a Blue Screen..
This only seems to happend with Operation Flashpoint Resistance and Lock On Air Combat (both uses a lot of memory). Computer is rock stabile unless this.
I have tried both Win2k/XP and flashing my BIOS to the most rescent one, as well as the drivers.. I have also tried without the PCI-cards, and disabled some features at the motherboard, but with no help.
But when I used Via AC97 drivers instead of C-Media, it crash no more (aswell as no sound drivers at all), but I have no surround sound (I suppose that driver don't support my sound chip fully)...
Ok, know to my specs,
AMD XP 2500+ Barton 512 kb cache
MSI KT6 Delta-L
2 x 512 MB Twinmos Twister CAS2 400 MHz
Powercolor ATI Radeon 9800 Pro 128 MB
Q-Tec 450W Gold
Avermedia DVB-T Digital-TV-card
Promise UltraTX2-100
And some harddrives

:biggthumbsup:First off see if your ram is compatible Here then what is your power supply AMP'S like?
as well we can try this Page to get a stable start
see how that goes,
post back

Upgrading to MSI KT6 DELTA-FIS2R

I upgrading from my system.
I was wondeing if anyone had any comments or has experanced problems with this combination of these new parts listed along with my older parts?
Any comments and suggestion welcome
Any Overclocking suggestions 8)
I just ordered:
MSI KT6 DELTA-FIS2R
AMD Athlon XP 2500+ (Barton)
Thermaltake A1889 Silent Boost
to upgrade my system.
$257.00 sure seamed a fair price for the power boost I should see :D

Opps.. I didn't change my sig..
I do have a Radeon 9800 128 Meg
Which PSU whould you suggest to get the best OC out of these?
Antec True 480P maybe?

HELP - MSI KT6 Delta-LSR

hi,
i have this motherboard: msi kt3 ultra2, and now im buying a new one, for use with my barton 2500+.
i prefer MSI KT6 Delta-LSR, but i dont know if can i change the multiplie like in Abit NF7-S (MaxFID™ Technology).
can i do this on MSI KT6 Delta-LSR ?
remember: in actual motherboard i can change the cpu ratio only to 12.5
i need to select what ratio i want. like 15x, 16x...
thanks and sorry for the english.

a its a via board not an nforce
b why change it if you want multipliers like that ,only reason to change is to run 200 fsb and you only get yto do that with lower multipliers

MSI KT6 Delta( Via KT600) works with mobiles???

Hello, just bought today a used cpu, it's a Athlon XP mobile 2000+ for my MSI KT6 DELTA...
It just won't boot... i turns on and off after a second or less...
Is this an unsupported cpu??
I've searched on teh msi page for cpu support, and I have my doubts...
Here's what's qritten on the CPU Core: AXMH2000FQQ3C
For waht i understand it's a Thoroughbred/barton based cpu, 45W, works at 1667MHz, with FSB Autodetect, deafault V, 1.45, max temp 100º C, 256kb cache, 266 MHz bus...
It's said on the main page of this board, that it's supports 400MHz FSB's...
HELP PLEASE!!!

Quote
HELLO??? IT SIMPLY DOESN'T RUNS!!!
you expecting help adopting that tone?
lose the sarcasm and the caps lock and you more likely to get advice
For what it is worth you are not making yourself clear.
For example:- Quote
It just won't boot... i turns on and off after a second or less...
Quote
and to turn it back on with the cpu, i have to clear cmos data...
Let's assume cpu is correctly greased and seated; when you power on get no response (psu fan, cpu fan, case fan, beeps?) unless you clear cmos and then once you do that you get 1 sec of activity before system powers down?
have you put old cpu back in and still works?
i guess you will know more when you test new cpu elsewhere

MSI KT6 Delta series problem!! :(

Hi there!
Im new to the forums so hello to everybody
Ok i have a problem with my new motherboard.
I bought the MSI KT6 Delta SLR i think ...
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=474
Ok before i bought this motherboard i used to have a ABIT KT7 Raid and it all worked well!
But i wanted a new 1 so i bought the MSI mobo.
The setup in my case didnt change at all i only replaced the motherboard.
I started it up and it couldnt find the HD's on IDE1 ...But it did find the CDroms , dvd etc on IDE2.
I changed it around so i had the HD's on IDE2 and CDROM's on IDE2 ...but it didnt startup after that ...
I changed them back and again it only found the CDrom's .
I thought hmz maybe i broke something who knows so i changed back to the old mother board and it worked well again
So it had to be the motherboard i thought ...so i went back ...got a new 1 same brand / type etc.
Again i did the same but now AGAIN it didnt find the HD's on IDE1 ...but it DID find the HD's on IDE2 .....
So now im stuck with only 1 HD and a dvd burner
What could be the problem ?
I tried everything....from " master/slave " and only 1 HD or only 2 HD's etc but then it either cant find the disks or it wont startup at all ....
Specs :
Maxtor 80g / WDC 40 g Harddisks
MSI KT6 Delta with sata raid etc ( check link )
Audigy2
Radeon9500
Pinnacle TV card
1024 ddr 400 mem ( in usersguide it says 4 banks..but i only have 3 .. ? )
Can someone plz help me ? going to work will check it later this evening. thxxx

how are the wd and maxtor jumpered
are they on an 80 wire ide lead blue end in the board
black in master grey in the slave
disable the sata in bios as in here as your not using it
http://forums.amdmb.com/showindex.php?s=&postid=2289803

MSI KT6 Delta and Auto update page problem

Hi, I have been lookin for the right forum to post this on for awhile heh but I have an MSI KT6 Delta FIS2R which has an auto update feature that uses an icon on ur desktop called MSI Live Update. This utility has been working for quite some time now but all of a sudden i get an error message in quote
"Microsoft JET Database Engine error '80040e09'
Cannot update. Database or object is read-only.
/autobios/VerChk/XSeries.asp, line 105"
I have been on a few sites including microsofts to try and figure out the problem but i get nothing concrete or at least anything i can understand, so I hope someone out here does and if so please help me! thank u

okay well I did that but does not seem to be working... also after just reading FAQ i noticed that the live update service is being updated which coul dbe causing the problem as well, but i dont know how accurate the date is on that I mean it is a FAQ. So.. is anyone else with this board having the same problem right now?

MSI KT6 Delta-FISR - D-Link diags "Boot attempt" failing

Hi,
I need some inspiration for this problem.
My sister's machine has been running fine (ish) for about 5 months. The sound has been "playing up" recently, sounding like it's stuttering. Anyway, that's not why I'm here.
At the moment, the machine won't boot up at all. I had it booted up today, and it was working OK, then it froze (sister complained that it froze yesterday as well).
On reboot, all I'm getting is the Xtreme main screen, then nothing else. The D-Link diags are showing 1 RED, 2,3,4 green which is
"Boot Attempt- This will set low stack and boot via INT 19h". It does nothing else.
I can't get into the BIOS, not can I boot from floppy. Doesn't matter if the HD is connected or not, it still fails at the same point.
I've stripped the machine back to the basics, so only have 1 CD-ROM, 1 HD, 1 stick of ram, floppy drive, graphics card.
I've swapped the graphics card .. same problem.
dropped the ram from 2 to 1 stick and switched sockets ... same problem
Swapped the PSU .... same problem
Is the Motherboard knackered ? Anyone got any more suggestions ??????
Thanks.
Ailsa
MSI KT6 Delta-FISR
AMD Athlon XP 3000+ *333 FSB
40gig IBM IDE drive
350W power
+12V 17A
+5v 33A
+33v 28A
-5V 0.5a
-12v 0.5a
+5v/SB 1.5A

ailsa, try removing the heatsink and cleaning any accumulated dust and dirt. make sure the fan is spinning. then clean off the old thermal pad or paste, and apply a fresh thin layer to surface of CPU die (the metal bit in the middle)
EDIT: fredrik, i see you edited your post as i was typing mine!

[VIA] Problems with MSI KT6 Delta

MSI KT6 Delta
AMD XP 2000+
256 MB DDR 400
GeForce FX5200 128 MB DDR
I installed WinXP+SP1 and VIA4in1 v4.55 with NVIDIA 66.93 drivers. The screen fades out and in less than a second the picture shows up again.
Note: What should appear in device manager in section "System devices" after installing VIA4in1 v4.55?
I tried: changing video card, RAM memory, installing WinXP+SP2 (worse results!)
Thanks in advance

The system reports no errors nor conflicts in Device Manager window. This problem appeared when I did an upgrade from WinXP SP1 to SP2. I use Fedora Core on the same computer with NVIDIA drivers installed and there were no problems. I tried to change the monitor but it was the same. I think I managed to solve the problem by installing WinXP SP1 and an older NVIDIA driver (version 4.5.2.3) and VIA 4in1 pack 4.55. Everything runs smooth for now.

Msi kt6 delta lsr temp problem?

i have just installed a msi kt6 delta lsr , but when i have ran the system a while the sys temp is around 40-42 c and the cpu temp is around 52c .
on my old mobo the temps never went above 35c for the cpu and 25c for the sys temp .
my specs for old mobo etc =
AMD Athlon(tm) XP 2600+
jetway v400db (kt400 chipset)
400w psu
ata133 80gb hd (maxtor)
512 ddr333
geforce fx5800 ultra
windows me (but same in win xp pro)
2 fans blowing air into case and 2 sucking air out
does anybody know a way to improve the temps please

Yippee! A ME user, like me! You know I guess MS support for W98 and ME has been prolonged til 2006? It has partly to do with Linux.
The temperature for the CPU is a little high, but not alarmingly so. Barton gets a little bit hotter on these boards, and I think it is the placing belovw the PSU that is the cause. The system temperature for you is no problem.
To get the warmth away from the CPU I suggest a fan placed in the case door/side, that sucks it out.
Perhaps you have not got such a case door? Then I suggest a quiet 80 mm fan on the back of the case as high as possible, again sucking air out in order to make a nice air flow. Another suggestion is to tie away cabling to the sides of the case as much as possible, power cables, IDE cables etc.

MSI KT6-DELTA power Goes up but nothing happen after ...

I have An Msi KT6-DELTA board with an Athlon XP 2000+ processor , SAMSUMG 512 MB DDR 400 , GeForce 3 64 MB DDR , 300 Watt power supply + Volcano 9 fan .
The power light goes on when I start the comp and fans are starting but nothing else happen nothing on screen ;( . I check the D-Bracket to know what was the trouble by the four light on it , All light are RED saying that the processor is damaged or not installed properly . I try 3 processor on it , all processor was Ok so what's going on?
Are you thinking that my board is damaged? ?(

Hi,
I am running an KT600 LSR and I am having the same troubles. I push the button to start the computer and the fans come on.Nothing else happens until I press the reset button, then it starts normally. However it does search for a raid device every time it boots, None are connected so is there a way to make it stop searching? It sometimes hangs on that screen for 10 to 15 seconds.
Thanks,
Tj
My system is
XP 2200
Kt 600 LSR main board
512 mb pc 2100
wd 100 gb (boot drive)
maxtor 120 gb
lite on 52x12x52
dvd drive
sound blaster audigy gamer
ati 9000 pro 128 mb ddr

Msi Kt6 Delta Fis2r

I have question about MSI KT6 DELTA Fis2r. Why in CoreCenter I don't have System Temp??? In CoreCenter I can see sys temp, but it's NB temp , and in the place of NB Temp is blank.

Hello!
I had the same kind of readings. System temps and NB temps are pretty much the same thing and I don't think there is one sensor for the NB and one for the system as a whole.
If I'm right, it is probably an installation/software problem. Have you tried reinstalling CoreCenter? Do you have any other monitoring program installed?
Found I do not trust CoreCenter and got rid of it. Can do what I need in BIOS.

New MSI KT6 Delta - No Post

Similar Messages

Maybe you are looking for