New MSI system questions/mistakes?

I built a new system with the K7N2 Delta ILSR.
It's running XP home with all the updates/service packs.
It has the latest MSI drivers/utilities.
Hardware:
AMD XP3200 Barton R with 400 Mhz FSB (more on this later)
1G of PC 3200 Kingmax Memory.
PS case with a TigerPro PSU rated at 350W (also has front USB2.0 ports)
SCSI drives (7200 and 10K)/Adaptec 2940 U2W.
Plextor DVD +/- RW
ATI 9600SE video
So the first issue (now that I have researched things better... duh!)
1. This MB doesn't take advantage of the CPU/Memory speed, but seems to run OK at 2200 MHz.     Should I try to overclock to get more performance?  
2.  Is this power supply good enough or am I running on the edge?
Finally, I can't get the !@#$% USB2.0 drivers to install.  I've followed some other recent threads with the same issues and tried the recommendations with the same results... no USB2.0 drivers.  I think this is not allowing my Nomad ZenII drivers to install.
Thanks for any advice.

Regarding question 1, is Kingmax RAM approved for NF2 mobos (check the sticky at the top of this forum).
About question 2, PSU on the edge?
That depends upon the amperages coming from the rails of your power supply (especially the 12V).  The 12V should >18A to properly power your 'puter.
In reality there are only a few good power supply makers (Antec, Enermax, PC-Power & Cooling).  The others like Qtech, Super Power, Uber Super Power, Macho Power, etc. are junk, relating to their $40 price point.  If you want to save yourself alot of headaches get a >430W name brand power supply, and you'll be good to go.  For reference, my 460W Enermax puts out 32A across all three voltages.  We've seen people in this forum with no-name 500W power supplys which put out 14A on the 12V rail and wonder why they're having problems.
Ok, I'll step off my soap box, OUCH...
Good Luck

Similar Messages

  • Request new password system question:

    Hi folks,
    I have a small question about the request new password system:
    What to do when someone doesnt like another user who uses my (for example) forum like application and keeps requesting new passwords for this user...
    I think the user would go crazy about his password changing all the time and stops visiting the forum. Does someone know a solution?
    It would be nice if a user must confirm his password change trough e-mail before it gets changed, something like the account activation system or something.
    Thanks in advance for any comments :)

    Yes, if you change the email password, the stolen iPod will not download new mail. Existing mail on the device can be accessed.
    lost/stolen                                     
    No app on the iPod is required.                           
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or continue to show off-line.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    iCloud: Erase your device
    iCloud: Use Lost Mode
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                               
    Reporting a lost or stolen Apple product                                              
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • HELP ! System freezes now with new MSI GeForce 6600GT AGP

    Any/All help is greatly appreciated... this is driving me crazy.
      Just installed a new MSI 6600GT AGP card.  Windows/Apps work fine.. but system keeps freezing (disabling keyboard as well) when running certain games (3D?) like Medal of Honor, Prince of Perisa, SplinterCell.  Also, freezes on 3DMark01SE benchmark software.  What strange is 3DMark2K5 ran fine.. and returned a respectable score (3078).   I've tried unistalling/re-installing latest MSI drivers (71.22), Nvidia's 66.93, and removing nVidia's GART drivers.  I've also disconnected other hardware to allieviate PSU constraints.  I've uninstalled/re-installed 6600GT card and molex power connector on card.  My system specs are below:
    Motherboard = ASUS Focus A7N8X-LA, BIOS=American Megatrend 3.07, Chipset = nVidia nForce2
    MSI GeForce 6600GT 128 AGP
    1Gb Ram
    200Gb Maxtor  8mb buffer HD
    ASUS E616P1  DVD-ROM
    RICOH  MP5240A  DVD+RW
    Enermax EG375P-VE SFMA PSU  (has separate 12V rails)
    Any suggestions as to what else to try?  Getting ready to RMA this card.

    Quote from: andysue on 23-February-05, 07:34:53
    Thanks for that Crull.
    I have just found this on a site it may help someone, I hope to get my replacement tomorrow I shall let you know how it goes.
    Question
    I just got a K8 series MB , and your A6600GT 128MB VGA , every time when I quit the 3D games ,
    the system gave me a blue screen and then restart the system. I already update the VGA driver and MB
    driver but no luck , what can I do?
    Answer
    If your system are WinXP + SP2 , We suggest you to disable DEP function.
    Please follow below steps to disable the DEP. (See below picture)
    1. First , Select “Advanced” under “System Properties”
    2. Choose “Settings” under “Startup and Recovery”
    3. Click “ Edit “ , then you can edit “boot.ini” file.
    4. Change “/NoExecute=OptIn” as “/execute” (See below red square in step4)
    5. Then save the boot.ini file and restart the system.
    6. After rebooting , the DEP function will be disable.
    Other information please see below link :
    http://support.microsoft.com/kb/875352/en-us
    http://www.sysinternals.com/ntw2k/info/bootini.shtml
    http://www.microsoft.com/technet/prodtechnol/winxppro/maintain/sp2mempr.mspx
    • /NOEXECUTE=OPTIN Enables DEP for core system images and those specified in the DEP
    configuration dialog.
    • /NOEXECUTE=OPTOUT Enables DEP for all images except those specified in the DEP
    configuration dialog.
    • /NOEXECUTE=ALWAYSON Enables DEP on all images.
    • /NOEXECUTE=ALWAYSOFF Disables DEP.
    Configuration Description
    OptIn
    (default configuration)
    On systems with processors capable of hardware-enforced DEP, DEP is
    enabled by default for limited system binaries and applications that
    “opt-in,”
    With this option, only Windows system binaries are covered by DEP by
    default.
    OptOut DEP is enabled by default for all processes. Users can manually create
    a list of specific applications which do not have DEP applied using
    System in Control Panel. IT Pros and Independent Software Vendors
    (ISVs) can use the Application Compatibility Toolkit to opt-out one or
    more applications from DEP protection. System Compatibility Fixes
    (“shims”) for DEP do take effect.
    AlwaysOn This provides full DEP coverage for the entire system. All processes
    always run with DEP applied. The exceptions list for exempting
    specific applications from DEP protection is not available. System
    Compatibility Fixes (“shims”) for DEP do not take effect. Applications
    which have been opted-out using the Application Compatibility Toolkit
    run with DEP applied.
    AlwaysOff This does not provide any DEP coverage for any part of the system,
    regardless of hardware DEP support. The processor does not run in
    PAE mode unless the /PAE option is present in the boot entry.
    Yes let us know how it goes. Hopefully well.

  • After installing new operating system, Mac started to open word when I turn on the mac and a question always appear about FaceTime.

    After installing new operating system, Mac started to open Word when I turn  on the Mac  and a question about face time always appear when turn on the mac. What should I do?

    Look in system preferences>users and groups>log in items.
    Barry

  • I erased my HD and could not install lion. if I turn on the mac now all I see is a folder with a question-mark. How can I install a new operation system?

    I erased my HD and could not install lion. if I turn on the mac now all I see is a folder with a question-mark. How can I install a new operation system?

    Install or Reinstall Mavericks, Lion/Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
            the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • New MSI GT Dominator PRO 890, screen goes black, system freezes

    Hey guys, I have a new msi dominator gt70 890. While running 3d mark, my computer screen just went black. It took a while but after hitting enough buttons I finally got back to the desktop view. But trackpad nor mouse would work. I had hwinfo and hw monitor running in the background and the values kept changing, but system was totally unresponsive. I had to shut it down by unplugging from wall, and taking out the battery. I kept hitting/holding power button, but wouldn't do anything but sometimes put computer to sleep.
    Then again while I was running realbench same thing. Then posting here on this forum, it happened again.
    Is this a common problem, will a driver update or setting fix this. Is the computer bad? Does anyone else have this happen or even better know how to fix it.

    First I was running on the NVidia gpu, with current drivers. Second time I believe NVidia as well. Third and then on were all intel drivers. Driver for intel I don't know for sure, I know I had intel utilitiy ran and searched for driver updates and didn't find any.
    I have since then, swapped out hhd for ssd, used the usb with recovery on it to install windows. Swapped out the 12gb ram for 32 gb corsair vengeance, changed out thermal paste and used formula 7 nano diamond thermal compound.
    Since then, I have just go up and running after installing windows. Downloading windows updates now, got NVidia drivers up to date, took off nortan, running furmark 720p continuous test now to check gpu temps, whjich are still 90-93c more around 91c. Which same as before so no difference in thermal compound, except I believe that the 880m gets throttled around 92-93c if im not mistaken, so since im at that barrior im not sure if gpu temps are better or not. Never tried gaming as it takes to long to dl and right now ive got other things. will be d/l intel extreme tuning utility and running that, to compare with cpu temps. Those were around 82c on stock paste, I should see a better/worse number there as thermal throttle is 100c which is way over where I am.
    I also have 3dmark downloading right now, il run that next, and compare with scores from before to determine throttling, and I can also compare temps to before on stock paste, I took screen shots of it all.
    As for black screen, nothing yet. So im really hoping that the new drive and windows install fixed whatever that was.
    Is there a app or program that checks all msi programs for updates?

  • Help: new MSI 970a-g46 not booting.

    hello.
    i searched this forum before posting but couldn't find a solution that worked, so i thought i'd post my issue and see if y'all could help. basically, after installing the mobo and all the parts, powering on the machine does nothing but spin the fans and illuminate phase 1 CPU light for a split second. then nothing. no beeps, no further activity.
    i just purchased brand new:
    MSI 970A-G46
    AMD FX 8-Core
    Ballistix 4GB DDR3 PC3-12800 (1 stick)
    Diablotek EVO ATX midtower.
    and i'm using these my old parts:
    Themaltake Purepower 500 ATX 12V 2.0
    Gigabyte G Force 8 Series (GV-NX86S256H) graphics card
    an IDE PCI card (where my 160gb maxtor with the OS connects)
    two SATA drives seagate 500GB and a WD 2TB
    up untill i shut down my old system to build this one, everything was working fine.
    after reading the forum, i've tried moving my RAM from slot 2 to each other slot. trying to boot each time had same result.
    i tried to reseat the CPU chip, but went no further than taking the fan off and making sure the CPU pins were not visible. then pushed down on the fan with some force while i put it back. trying to boot had the same result.
    i've tried to clear the CMOS, but honestly not sure if i did it right. moved the jumper over, then waited a bit and moved it back. tried booting after that, same result.
    i'm hoping someone has a quick fix that might keep me from pulling the mobo back out and starting again.
    (side question: if i do have to start again, do i need more heatsync themal goo or will the stuff already on the CPU still work since it's never turned on?)
    thanks in advance for any help. if i can provide more info on my setup, please let me know.
    this is my first build all on  my own and it's having predictable results.

    i searched and found i made a real rookie mistake. :(
    Quote
    2. Did you plug in the 4/8-pin CPU power connector located near the CPU socket? If the motherboard has 8 pins and your PSU only has 4 pins, you can use the 4-pin connector. The 4-pin connector USUALLY goes on the 4 pins located closest to the CPU. If the motherboard has an 8-pin connector with a cover over 4 pins, you can remove the cover and use an 8-pin plug if your power supply has one. This power connector provides power to the CPU. Your system has no chance of posting without this connector plugged in! Check your motherboard owners manual for more information about the CPU power connector. The CPU power connector is usually referred to as the "12v ATX" connector in the owners manual. This is easily the most common new-builder mistake.
    from http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems
    wow. plugged in the 4 pin cpu power and it booted into bios. so thanks for the help and for listening.
    signed,
    an embarrassed n00b.

  • Can we add new logical system in Entitlement tab in SAP Authentication.

    Hi ,
    We already Installed and configured sap integration kit and every thing works fine. My question is as of now we connected our sap BW Dev system  to BOBJ but we would like to connect to BW Prod System to same BOBJ System. What are the steps we need to follow to do this.
    Can we just add the new logical system in entitlement tab of sap authentication in BOBJ 3.1? and import the roles and login to BOBJ USING THE Newly added SYSTEM Credentials.  Thanks in Advance.
    Thanks,
    SK.

    Hi Ingo,
    Thanks for the information.
    Are there any specific steps you need to follow when you are adding one more system to sap authentication. can you please give the steps we need to follow to setup this in right way. Thanks in advance.
    Is there any thing we need to configure on sap side other than sap logon ticket parametre. If you can please provide the steps it will be great. Thankyou very much In advance.
    Thanks,
    SK.
    Edited by: Vallabhaneni SK on Jul 14, 2009 8:53 AM

  • New Development system copy from Production

    Hi All,
    Hope you can help me out here with some ideas.
    We are currently planning to implement a new SAP BW Development system, and for this we would like to make it a 1:1 copy of our current production system. Meaning all from customizing, ABAP, workbench objects etc.
    But what we do not want is all the transaction and master data in infoobject, cubes etc., we are only interested in the structure and objects. Therefore we can rule out "System copy".
    My question is then, is there any other ways to do this when system copy is a no go? I know we can do client copy but then we will not get all the workbench / ABAP programs which we need.
    Any ideas on how to do this?
    Thx. in Advance

    Hi Rasmus,
    But what we do not want is all the transaction and master data in infoobject, cubes etc., we are only interested in the structure and objects. Therefore we can rule out "System copy".
    Options 1: As BI objects are cross client , copying client will not solve your purpose 100%.
                    You can perform system copy and then clean up data in DEV
    Option 2: You can create a new Development and then create TRs for required configuration objects and move to new development system.
    Option 3: Use SLO tools to perform container copy without any data.
    Hope this helps.
    Regards,
    Deepak Kori

  • How do i deinstall ios7 and go back to ios6 on my ipad?  The new op system is slow, flickery, and won't allow me to run youtube videos.   Makes my ipad pretty darn useless.

    How do i deinstall ios7 on my ipad?  The new op system won't let me run Youtube, won't give me accesss to one of my gmail accounts, flickers when i do searches, and pretty much made my favorite device pretty much useless.  Please don't tell me that apple is deliberately trying to get me to upgrade my old device just to generate revenue.  That's why i switched from Microsoft products four years ago.  Is it time to go Andriod?

    Apple does not support ios downgrades. The same question was asked hundereds of times when ios 6 and every other new version came out.
    Try this
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings  (or for network connection issues 'reset network settings').
    (no media or data will be deleted from the device, this will only take a minute).
    If that doesn't work then backup and then restore the device as new first (to isolate cause of the issue). Then from backup if necessary.
    Make sure iTunes is updated to the latest version 
    How to back up and restore (iCloud and iTunes)
    http://support.apple.com/kb/HT1766

  • Feasibility for a new production system in the same environment

    Dear friends,
    Our management has come up with a requirement of expansion of SAP environment to cover up users in a different country for their francise over there. The options we are considering are below:
    1. Implementing a whole new setup ( ECC, EP,BI, PI,Trex).
    2. Expanding the lease lines between the sites in both the countries and providing access to the present setup itself with enhancement in the current hardware configuration.
    or is it a good practice to keep a new Production system in the other country and add a new delivery route for the new production system within the current transport route ? How the license part may be taken care in these cases ?
    Your suggestions are welcomed.
    Many thanks,
    SUJIT

    Hi Sujit,
    The answer to this question really depends on whether the new country is going to share much of the same configuration with some tailoring to local laws and requirements.  If the system is going to be the same, then there is now reason to deploy a new system unless you are reaching technical limits for hardware.  For ease of management and usage, then having one system is preferred.  You can then upgrade your network to cope with the increased load and hardware as required. 
    Hope this helps,
    Graham

  • Transfer GL Accounts to a new SAP System

    I need to transfer G/L accounts to a new SAP system.
    I am trying to use Data Transfer Workbench. I need to know do we create it in the Company Code from where I have to move the GL master data or in the target system.
    One more question, after Extract GL Master Data file is generated-the next step is to create the spreadsheet file. I am not able to find where we do it.
    All help is appreciated.

    I am using the tcode SXDA. The next step as explained in the SAP R/3 documentation is Processing a file with spreadsheets. It done as follows:
    Import the file using a spreadsheet program and set the columns to the data format Text.
    Edit the file using the spreadsheet. You can enter your data manually or copy it from another spreadsheet file.
    When you have finished editing the file, save it with the extension "txt".
    But I am not able to figure out how to do that. If anyone knows, please explain little bit in more detail like how can I import the file using a spreadsheet program.

  • PI 7.0 Java stack config of the stand-alone server to  new cluster system

    Hi colleagues,
    we have a PI installation in stand alone server (SAP with abap +
    java and Oracle in the same server)
    The system number of the ABAP stack is 00, and we are conecting to the
    Java stack to the for example the URL
    http://hostname:50000/rep/start/index.jsp
    We have installed a new PI in a MSCS and in some weeks, we´ll have to
    copy the database and configuration of the stand-alone server to the
    new cluster system. In the SAP PI installation on the MSCS, we have
    confirmed that with the ABAP stack, we won´t have any issue because the
    ASCS has the system number 00 (message server), so we only have to
    install a SAP system in each nodes without care these new system
    numbers because we are configuring a Logon group but the question is in
    the Java stack... The SCS (service in the cluster) has the 01 system
    number...
    What is the best way to keep the same URL to the Java stack that in the
    stand-alone server? (remember:
    http://hostname:50000/rep/start/index.jsp )
    Have we to install a Webdispatcher in the MSCS and one Java stack in
    each node of the cluster? we think that is right but we have a lot of
    doubts about the URL, the files of the Java (if they are stored in
    local disk in one node, how are they replicated to the second node?)
    and so on....
    Could you give us any suggestion to make the "migration" from the stand-alone to a cluster in a transparent way for the users?
    Thanks in advanced and kind regards !!
    Victor

    Thanks a lot.
    For information
    Our central SLD is on a standalone system
    However slave SLD (to ensure autonomy and HA for production XI system) will be deployed on Java separated hardware system of Xi production system.
    On master SLD all systems are described and all machine are linked with it (SLDAPICUST) except production XI one
    On slave SLD, all data of master one are replicated and only XI system is linked with (SLDAPICUST)

  • Data Migration from R3 to new ECC System

    Hello,
    We are doing a fresh implementation for SAP MDM. Currently we have 3 SAP R/3 systems and 1 non-R3 system (BPCS system). One of the project goals is to do data migration from all these 4 systems into a new SAP ECC system and to MDM for Vendor Master, Customer Master and Material Master. My manager says that we need Business Objects tool to Migrate these data. But, my question is that is it not possible to achive this through XI/PI itself ? Can anyone let me know the entire process in XI/PI as to how do I receive the Idocs from R/3, convert into XML and then send it to the new ECC system in Idoc format ?
    Thks & Rgds,
    Hema

    Hi Gandhi,
    You have SAP MDM, BPC and R/3 systems in your landscape, when you are migrating data to new ECC system, what is the role of mdm, did you moving the same data to MDM to avoid duplicate/redundant data??is there any data migration from R/3 to MDM(any integration required)or MDM to R/3,
    You have to develop different interfaces to transfer data from MDM to ECC, BPC to ECC.definelty you required one middleware, the option definitely SAP PI. it offers very easy of integration between MDM and R/3 system, you can use MDM-PI adapter to connect to directly MDM syndicator file port from there you can pull the XML file and convert it in to IDoc format use Receiver IDoc adapter in PI, the same way we can integrate BPC system with R/3.
    Search in sdn, there are some scenarios integration of R/3 and MDM using PI, refer those links, if still you have any doubts let me know,
    Regards,
    Raj

  • New Operating System Drivers Did Not Transfer

    I recently bought a HP Pavilion DV7, Product Number : LW174UA#ABA, from my friend and decided to install a new operating system onto it. My buddy didn't tell me much about what was wrong with it, other than it ran a little slow. I figured that it was cheap enough and I could easily throw Windows 7 x64 on it, instead of using Windows 8.1 x64 which he had installed on it a while ago, and use it as sort of a backup to my desktop.
    I installed a new copy of Windows 7 Professional x64 on it and when the installation was complete I noticed I could not access the internet nor use the usb drives. I went into device manager and discovered that a handful of decives had the warning yellow triangle explanation symbol next to them. I quickly looked at the problem and noticed most of them had Error Code 28. This told me that I will need to install the drivers for the parts.
    Okay, that shouldn't be too difficult. I found the WiFi driver and installed it. The issue was solved (temporarily) and I could access the internet.
    After searching through forums I found out that my usb problem can be many different issues. I then came to the conclusion that a service pack update (since I could not find any usb drivers) should fix the issue. Nope, the usb drivers still have not been properly installed. On top of that, the internet now truns on and off. I will have access for a few seconds and then my computer tells me that I do not have any conntections.
    Does anyone know what I did wrong or where I can find the drivers that may fix this issue?
    I already went to the HP drivers site and installed most of the drivers. Things like the finger print scanner I am not too concerned with at this time so I skipped over those.
    This question was solved.
    View Solution.

    Hi:
    It's not related.
    You need the card reader driver...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102008-2&cc=us&dlc=en&lc=en...

Maybe you are looking for