New MSI Z97 Gaming 3 - very strange audio issues

(sorry for the long post)
Hi, I recently bought some computer parts from Newegg and built my first gaming pc yesterday, but when everything was finished setting up I noticed a major issue with the audio. Both the headphone jack on the motherboard and the headphone jack from the front panel connector aren't working correctly.
If I plug in my headphones into the motherboard jack, the audio level is REALLY low. Like, even if I turn up the volume to 100% it sounds like it's only at 10%. I looked through the volume settings for the headphones and didn't notice anything wrong. Then I tried updating my drivers with the cd and ran the live update utility, but nothing changed. Also, the audio will sometimes make distorted/static sounds when the music itself is loud, yet I can still barely hear the music.
The front panel jack is even worse! The sound is much more distorted/static-y when I plug in my headphones there.
I know it's not my headphones fault because they work fine on my laptop. Even if I plug in a different pair, I still get the same low volume and static.
I know the front panel issue is not because of the case. If I put the motherboard in an old HP case and plug in my headphones into the front panel on this case, same issue. (I know the old case normally works fine).
I even tried running a linux live usb in case it was something wrong with Windows. It still had the same issues.
My specs:
MSI Z97 Gaming 3 ATX LGA1150
Intel Core i5-4590
MSI GeForce GTX 970
Corsair Vengeance Pro 8GB
WD Blue 1TB
XFX XTR Series 550W
Windows 8.1 Pro
I would really appreciate some help. It seems like I've tried everything. 

Hi
What is the BIOS version your board currently has?
Try without graphics card and with single RAM stick.
You could also try out of the case on non conductive surface like wooden table or motherboard box, and see if it works then. Might be something in either cases shortening the board.

Similar Messages

  • New MSI Z97 Gaming 7 and 4690K Overclocking

    I have finally received my MSI Z97 Gaming 7 and 4690k earlier this week.
    When I did the overclock Genie it took me up to 3.9mhz but believe this can be easily overclocked higher manually. I am fairly new to overclocking. However, can't seem to find the ability to manually overclock this in the BIOS.
    Any ideas where/how to do this or if there is an online guide. Also has a Noctua NH-D14 cooling the CPU.

    First of all you disable OC Genie, it is useless for people that want MORE oc than it gives you.
    Here is forum's OC guide:
    https://forum-en.msi.com/index.php?topic=40413.0
    And other forum's OC guide:
    http://www.neoseeker.com/Articles/Hardware/Guides/OCguide/
    I don't overclock (see my spec) so I can't provide you with more details but can guide you to a good link

  • MSI Z97 Gaming 9 direct audio power switch

    please help.
    to enable direct audio power Z97 gaming 9 up or down?

    By default it's disabled. So if it's down, then turn it up or vice versa.
    Not sure, but better if you do it when PC is turned off.

  • MSI Z97 Gaming 5 - RealTek Audio Drivers not working

    I just assembled my rig and installed all the drivers. For some reason there's no audio playing when the Realtek drivers are installed. Audio can be played when using the generic audio drivers. The Sound Blaster Cinema 2 doesn't work as well. I get the following errors below when I have the realtek driver installed.

    I just fixed this. Apparently the realtek drivers that came with the installer doesn't work. I downloaded the latest version at the website and it works. I wonder if MSI knows this. They should fix the installer cds that come with the motherboards.

  • Re: Brand new MSI z97 Gaming 5 up in smoke.

    Thanks for the comparison chart!

    Quote from: HenryW on Today at 00:17:55 It appears to be this RAM but his was a 3 channel kit at the time for the X58 MB.  http://www.newegg.com/Product/Product.aspx?Item=N82E16820231259&cm_re=G.SKILL_Trident-_-20...

  • Microphone issue with MSI Z97 GAMING 5

    Hi there!.
    I have just set up my new computer and i have problems with my microphone. My mainboard is a "MSI Z97 GAMING 5" and my box: NOX Coolbay SX.
    I have installed the drivers from disk and tryed also searching drivers on the web of MSI. I can hear with my speakers with no problems, same with my headset. But there is no way to use my microphone. I put it in the front panel, then i checked the control panel - sound and Windows tell me that the microphone is connected, but dont work. if i put it in the back panel, the realtek HD administrator tell me that something is connected in the microphone slot but WIndows dont detect it.
    in the BIOS, the HD Audio is ENABLED. I dont have any idea about what to do now. I have search on this forum but i havent seen this same issue. Can you help me?
    Thanks and sorry about my english. 

    ill post my specifications
    Board: MSI Z97 GAMING 5
    Bios: Version 1.0
    VGA:   MSI GeForce GTX 760 Twin Frozr OC 2GB GDDR5
    PSU:   Nox Urano VX 750W PFC
    Intel Core i5-4670K 3.4Ghz Box 1150
    MEM: G.Skill Ripjaws X DDR3 1600 PC3-12800 8GB 2x4GB CL9
    HDD: Seagate Barracuda 7200.14 1TB SATA3
    COOLER: Katana 4
    OS: Windows 7 64bit Professional

  • MSI Z97 gaming 9 AC Cmedia audio.

    hello i have problem with cmedia audio (i like use cmedia for my headset, beautiful sound  )
    but cmedia make big latecny.
    is felt when I played the game FIFA 15.
    then I disable c media from the device manager.
    and I use Realtek, but not as good as c media voice.
    =====================
    i7 4790k
    MSI Z97 Gaming 9 AC bios 1.7
    corsair 2x4GB cl8
    ASUS GTX 780 TI DC 2 OC
    windows 8.1

    Does this happen only when playing FIFA 15?
    Do you have Sound Blaster Cinema installed?
    I'm sure you can find a software called "Xear....(sor I forgot)" in your computer if you had installed the cmedia driver. And there's a button shows ASIO, then you can switch audio bit depth there, can try that switch to 16 and see what happens next.

  • MSI GTX980 Gaming sometimes not recognized by MSI Z97 Gaming 9 AC

    I have been experiencing a very odd problem with my new hardware.
    Hardware
    Motherboard: MSI Z97 Gaming 9 AC
    CPU: Intel Core i7-4790
    CPU-cooler: Scythe Mugen 4
    RAM: G.Skill RipjawsZ F3-17000CL9Q-16GBZH
    Videocard: MSI GeForce GTX 980 4GB GAMING 4G
    PSU: Seasonic X-660 80+ Gold
    SSD: Crucial M550 2,5" 1TB
    Monitor#1: LG 34UM95-P
    Monitor #2: Eizo Foris FG2421
    OS: Windows 7 Professional
    Issue description
    The thing is that with 2 monitors connected the videocard is not recognized on a cold boot, but boots perfectly most of the time after a restart. In some cases a restart doesn't do the trick. I have even seen a couple of times that the monitor shows that windows starts and then the monitor loses the signal from the videocard before I can see the desktop (rare). With just 1 monitor attached the videocard is recognized. Als the IGP works fine, it's just the videocard that doesn't seem to be recognized when 2 monitors are connected (all combinations of DP, HDMI and DVI). When the computer has booted after one or more restarts and the videocard is recognized the computer works flawlessly, no problems whatever I do with it (desktop work, stressing hardware, playing games, etc.). Not a single sign of instability.
    It's just the cold boot and sometimes the soft boot or restart that causes the videocard to not being recognized with 2 monitors connected.
    What makes it really weird to me is that when the computer goes into sleep mode I can wake it up normally within say 10 minutes. But if I wait for let's say an hour the videocard is not transmitting a signal through the videocard.
    When IGP is enabled the computer boots and windows loads normally (I hear the sound of the Windows login), although the monitors stay black when connected to the videocard. Then switching the connectors from the videocard to the motherboard shows me a normal Windows login screen, but the videocard is not visible in the device list. When the IGP is disabled to bootup sequence just hangs until a restart works and the computer boots normally with the videocard getting recognized and working properly.
    Click sounds
    I noticed the motherboard makes 4 click sounds when booting, like relays flipping. I think it has to to with distributing power to al the components, since it looks like components respond to the click by turning led lights on. But I have to say I've never come across a motherboard before that makes click sounds. Is this normal?
    Tried fixes
    - Replaced the RAM with 100% working RAM from my other computer (Corsair Vengeance LP CML8GX3M2A1600C9) -> problem persists
    - Disabed XMP -> problem persists
    - Replaced the PSU with another one (Cooler Master V550 Semi-Modular) -> problem persists
    - Reinstalled the videocard physically -> problem persists
    - Tried several combinations of connecting the 2 monitors to the videocard (all DP ports, HDMI and DVI) -> problem persists
    - Replaced the videocard with a MSI GTX970 Gaming (connected with 1xDP and 1xHDMI) -> problem persists
    Conclusions so far
    The cause can be found in the videocard or motherboard (probably BIOS issue).
    Who can shed some light on this issue?

    Quote from: JLio01 on 14-November-14, 17:02:39
    Try all PCIE slots no luck? Does the black screen always happen on one certain monitor or both?
    I tried both the first and the second PCIe slot. No difference except for the fact that in the second slot the card only works at x8 bandwidth.
    Quote from: jotan.va on 24-November-14, 18:05:51
    BTW - Did anybody try to remove the wifi module from the board and then test?
    I didn't install the wifi module in the first place.
    UPDATE
    I returned the motherboard to the webshop I bought it from and sent my cpu, ram, psu and videocard (GTX980) with it so they could test it. They found out that the videocard is the problem. So now I have to send the videocard to the webshop it bought that from. However, I am suspecting that it's just a VBIOS problem and not some fault in the hardware itself. On the other hand, it would be very strange that MSI would release a videocard that cannot work with one of their own top motherboards, wouldn't it?

  • MSI Z97 GAMING 3 Review--Performance Testing

    After the previous hardware and software introduction, I believe Z97 GAMING 3 will meet gamers’ expectation.
     Z97 GAMING 3 integrated with Killer E2200 LAN, Audio Boost 2, M.2 interface and the normal array of connections,
    It is truly a good gaming motherboard. Could all these features offer great performance and a good experience?
    Today I will test the performance of Z97 GAMING 3 and how good it is.
    MSI Z97 GAMING 3 Testing
    My test platform is MSI Z97 GAMING 3, Intel ® Core i7-4770K and MSI GeForce GTX 750 graphics card. The test
    consists of two parts:
    CPU Performance: Super PI, PC Mark Vantage and Cinebench R11.5.
    GAMING Performance: 3DMARK 11, Evil 6 Benchmark and FFXI Benchmark.
    Test Part 1
    CPU : Intel Core i7-4770K @ 3.5 GHz
    CPU Cooler : Thermaltake TT-8085A
    Motherboard : MSI Z97 GAMING 3
    RAM : Corsair DDR 3-1600 4GB X 2
    PSU : Cooler Master 350W
    OS : Windows 7 64 bit
    Basic performance testing (CPU setting by default)
    CPU Mark Score : 679.
    Super PI 32M Result – 8m53.897s.
    Graphics Performance Testing:3DMark 11
    3DMark 11 is designed to measure  PC’s performance. It makes extensive use of all the new features in DirectX 11
    including Tessellation, Compute Shader and Multi-threading.
    Intel ® HD4600 iGPU in 3DMark 11 Basic mode testing, the results is X385 Score.
    Performance mode test score is P1511 .
    System Performance:PCMark Vantage
    PCMark Vantage is a PC analysis and benchmarking tool consisting of a mix of applications such as based and
    synthetic tests that measure system performance.
    From the test results, the score of Z97 GAMING 3 with Intel ® HD4600 iGPU is 11,946.
    MSI  GeForce GTX 750 Testing
    Test  Part 2
    CPU : Intel Core i7-4770K @ 3.5 GHz
    CPU Cooler : Thermaltake TT-8085A
    Motherboard : MSI Z97 GAMING 3
    Graphics Card:MSI GeForce GTX 750
    RAM : Corsair DDR 3-1600 4GB X 2
    PSU : Cooler Master 350W
    OS : Windows 7 64 bit
    Graphics Performance Testing:3DMark 11
    Z97 GAMING 3 with GeForce GTX 750 the test scores is X1653 in 3DMark 11 basic test mode, The performance
    mode test score is P5078.
    System Performance:PC Mark Vantage
    From the test results, Z97 GAMING 3 with GeForce GTX 750 scores 11,518.
    System Performance:Cinebench R11.5 
    Cinebench is the software developed by MAXON Cinema 4D. Cinebench could test CPU and GPU performance with
    different processes at the same time. For the CPU part, Cinebench test the CPU performance by displaying a HD 3D
    scene. For the GPU part, Cinebench test GPU performance based on OpenGL capacity.
    Main Processor Performance (CPU) - The test scenario uses all of your system's processing power to render a photorealistic
    3D scene. Graphics Card Performance (OpenGL) - This procedure uses a complex 3D scene depicting a car chase which
    measures the performance of your graphics card in OpenGL mode.
    In Cinebench R11.5 test, MSI Z97 GAMING 3 with GeForce GTX 750 multi-core test is 6.87pts; OpenGL score is 73.48 fps.
    Z97 GAMING 3 with HD 4600 and GeForce GTX 750 in the GAME Benchmark Test
    For game performance testing, I will use Resident Evil 6 and FFXI Benchmark with the same platform.
    Evil 6 Benchmark
    CPU: Core i7-4770K
    Game resolution setting: 1920X1080
    Other setting: Default
    In the Z97 GAMING 3 with Intel® HD4600 iGPU platform, score:1175 (Rank D)
    In the Z97 GAMING 3 with GeForce GTX 750 platform, score: 5874 (Rank A)
    I use Fraps tool to record FPS status during benchmark testing.The Z97 GAMING 3 with GeForce GTX 750 average
    FPS is 202. The Z97 GAMING 3 with Intel® HD4600 iGPU average FPS is 32.
    FFXIV Benchmark
    CPU: Core i7-4770K
    Game resolution setting: 1920X1080
    Other setting: Default
    The 1920X1080 resolution, Intel® HD4600 iGPU score is only 910.
    However, the GeForce GTX 750 testing score is 4167. According to the official classification system, the score
    between 3000 to 4499 means high performance.
    I use Fraps tool to recorded FPS status during benchmark testing.
    the GeForce GTX 750 average FPS is 111.  Intel® HD4600 iGPU average FPS is 19.
    Test Summary
    MSI Z97 GAMING 3 is not very expensive. It has many features which are specially designed for gaming experience
    and good performance of benchmarks. Even in 1920x1200 resolution and high quality display setting, Z97 GAMING 3
    with Intel Core i7-4770K and MSI GeForce GTX 750 can easily handle any kind of games. The FPS of this system is
    higher than 60 and users will enjoy no lag as gaming. It is really a good and afforadable chioce for gamers.

    Thx for the sharing, since there are not much reviews about Z97 GAMING 3. 

  • [solved] Strange Audio Issue

    I am experiencing a strange audio issue with my Intel-HDA ICH7:
    # lspci -v
    00:1b.0 Class 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
    Subsystem: Hewlett-Packard Company Unknown device 30a5
    Flags: bus master, fast devsel, latency 0, IRQ 22
    Memory at d2400000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access>
    when I installed Arch linux the first time a mounth ago on this computer, I had a sound problem that was solved in a very strange way.
    Everything worked fine until a week or so (I believe from Alsa 1.0.12). Now sometimes sound works and sometimes it doesn't. For example sometime I boot the computer and have no sound, then I reboot it without doing anything, and then sound works.
    I have tried messing with the modprobe.conf:
    # /etc/modprobe.conf (for v2.6 kernels)
    # --- BEGIN: Generated by ALSACONF, do not edit. ---
    # --- ALSACONF version 1.0.11 ---
    #alias snd-card-0 snd-hda-intel
    #alias sound-slot-0 snd-hda-intel
    # --- END: Generated by ALSACONF, do not edit. ---
    #options snd-hda-intel model=F1734
    options snd-hda-intel model=z71v
    options snd-hda-intel position_fix=1
    but it was useless. If I put back the modules in rc.conf everything is worse: sound doesn't work at all.
    A diff between lsmod in a "working boot" and a "without sound boot" showed that the same modules where in kernel memory.
    A diff between dmesg showed this difference:
    < hda_intel: azx_get_response timeout, switching to single_cmd mode...
    was present in the not working boot. This line is absent in a working boot dmesg.
    The only way to make the sound card working everytime is to remove the snd* modules load from the boot sequence and load the modules "by hand" after the login.
    Any ideas?
    PS : If something is unclear due to my poor English please tell my and I'll try to explain it better.

    phrakture wrote:snd-hda-intel is screwed up - on my thinkpad I had to go into the bios and enable the modem for sound to work.  Oddly enough, the modem was off by default.
    Also, mine has no PCM listed, I need to use "front" as my PCM level... not to mention the UI is way off with 'tpb' (if you have a thinkpad)
    Yes it's not an Arch Linux related problem: I had problems with Debian (Etch and Sid based distros like ubuntu) too (but there I had no modprobe issue on the init sequence. Maybe is a problem of shared IRQs, but I have to study the existing documentation as I am a newbie). The difference is that Arch is simple enought for me to try something like modprobing "by hand" in the init sequence. PCM seems to work, however the volume is very low and I have found no way to make the mic work. Under Mepis I was able to make it work only if I plugged it in windows xp and then reboot into Linux. But I can't try it with Arch as I have erased the windows partition...
    I will try the new kernel, study the documentation and then report. Hoping this will be usefull to others too.

  • MSI Z97 Gaming 9 ACK problem with wifi (lag spike)

    hi all,
    the problem is that all is well connected to the ethernet (killer 2205).
    while on wifi I have many lag spike when i play online game.
    I got a laptop with similar wifi card (killer 1202) and all went good!!
    so why with killer 1525 on desktop i got this lag spike? its very bad.
    the network driver is the newset
    my system:
    windows 7 64bit
    msi z97 gaming 9 ack
    i7 4790k
    16gb ddr3 2133mhz
    msi gtx 970oc
    seasonic 860 platinum

    Quote from: darkhawk on 17-June-15, 18:01:01
    I'd be more for RMA'ing the board.
    But personally, I'm staying away from Killer Network products from now on. They are buggy and do not work very well when they don't work. Sometimes they don't work at all. Check back through these forums, and one of the biggest issues with any of the boards and/or laptops is always the Killer Networks NIC's. And there is no simple and easy fix for many of the issues.
    If it was me, I'd buy a nice wireless card and use that instead. Or do the Intel mod you posted about.
    I won't say that the Killer Networks device SHOULD work, but time and time again they prove to not work. In that case, I'd replace it with something that will and move on. A $40 wireless card to not spend days or weeks trying to fix the problem is money well spent in my opinion.
    now im going with powerlink and all went good, but as all know, powerlink after 2 years will broke and need to replace..... but online game with eth is always better.
    So im tihink to resend to AMAZON and ask for refund and ill rebuy a gaming 7 without wifi this change refund me a good 100 euro......

  • MSI Z97 Gaming 7 (A2 ERROR CODE)

    Hi everyone, because I have a problem with my Motherboard MSI Z97 Gaming 7 is that when I turn on my PC after display the code 99 and 9C, remains suspended in A2. From what I've read, this code is for a hard drive failure. The system remains in A2 indefinitely code until the reset button is pressed PC. In the second restart smoothly enters the operating system.
    My System Hardware is:
    *MSI Z97 Gaming 7 (1.90 BIOS)
    *Intel Core I7 4770K (NO Overclock)
    *16GB Corsair Vengeance (2x8GB) Memory
    *MSI R7970 Lightning X2 CrossfireX
    *Crucial M4 128GB SSD
    *Seagate Barracuda 1TB Hard Disk
    *EK Custom Liquid Cooling System
    *Generic All in One Card Reader
    *LG DVD/RW Drive
    *Corsair AX1200i Power Supply
    Then I tell them what I have tried without success this problem.
    * Update BIOS to 1.9 Versión (Latest)
    * Update SSD Firmware to 070H (Latest)
    * Change SATA Cables
    * Change SATA Ports
    * Reinstall Windows 8.1 in UEFI and Legacy Mode
    * Test each Ram Memory Sticks
    * Disconect internal USB Card Reader, Front Ports and Corsair Digital Link
    * Test try another SSD (Kingston V300 128GB)
    After trying all these things, the system is still hanging in A2 Error
    Thanks for any help you can give me.

    Quote from: pandaz on 24-April-15, 13:03:29
    You could try your device 1 by 1 and see which one of it is causing the A2 issue
    about this i already suggested the same:
    Quote from: Svet on 23-April-15, 21:42:28
    connected them one by one, and see which is causing this hang eventually
    he said any one of them alone is caused this A2 when its connected:
    Quote from: sebastianmancipe on 23-April-15, 21:49:10
    Already perform this test with any 3 devices, SSD, HDD or DVD's the same.
    Curiously hangs on A2 code when first turned not when restarted.
    Quote from: sebastianmancipe on 24-April-15, 04:12:03
    ¿this version of BIOS where it came from? It is official? because they have not posted on the official website of the Z97 Gaming 7? as had understood the latest BIOS for this motherboard is the 1.90
    its official, but beta bios and newer than your current.
    try all other things 1st that people suggested you, leave bios flashing as last option

  • MSI Z97 MPOWER MAX AC vs MSI Z97 GAMING 9 AC

    I can't decide which motherboard to purchase.
    MSI Z97 MPOWER MAX AC = 20 Phase, 1x Intel I218-V Gigabit LAN controller
    MSI Z97 GAMING 9 AC = 16 Phase, 1x Killer E2205 Gigabit LAN controller
    I'll be gaming, and having a play with overclocking, which is the best do you reckon, they seem practically the same otherwise?
    Which one would you choose?

    Cheers for the replies guys, I appreciate everyones opinions. 
    Been digging for some more info...
    Quote from: Techpowerup | Posted:  6th May 2014
    MSI Also Launches its Z97 Gaming Series / Z97 OC Series Motherboards
    The Z97 MPower MAX AC is a notch below the Z97 XPower AC. It offers a milder 12-phase VRM to power the CPU, but one that draws power from a combination of 8-pin EPS and 4-pin CPU power connectors, and featuring a coolant channel through the VRM heatsinks. There's no PCIe bridge chip, but the board still offers three PCIe 3.0 x16 slots (x8/x4/x4 when all three are populated). Storage connectivity on this board includes eight SATA 6 Gb/s, and one M.2 slot. The rest of its connectivity includes ten USB 3.0 ports, 802.11 ac WLAN, Bluetooth 4.0, gigabit Ethernet, and AudioBoost audio with headphones amp and ground-layer isolation. The Z97 MPower MAX is the most "affordable" of the lot, at under $200. Its feature-set is more or less identical to that of the Z97 MPower MAX AC, except it lacks 802.11 ac WLAN, Bluetooth 4.0, liquid-cooled VRM heatsinks, and onboard OC fine-tuning buttons.
    The Z97 Gaming 9 draws power from a combination of 24-pin ATX, 8-pin EPS connectors, and uses a 16-phase VRM to condition power for the CPU, which is wired to four DDR3 DIMM slots, and three PCI-Express 3.0 x16 slots (x8/x4/x4 when all three are populated, x8/x8/x0 when two are, and x16/x0/x0 when one is. 3-way SLI and CrossFire are supported.  An EMI shield covers the rear-panel I/O, while another shields the entire onboard audio circuitry, and the NICs. Audio is care of a 100+ dBA SNR DAC, which an external headphone amp circuit, ground-layer isolation, audio-grade capacitors, and EMI shielding. Wired connectivity is handled by Broadcom's newer Killer E2205 gigabit NIC. Wireless connectivity is handled by an Intel-made chipset that offers 802.11 ac WLAN, and Bluetooth 4.0 connectivity. Storage connectivity is devoid of SATA-Express, but features eight SATA 6 Gb/s, and an M.2 slot. Overclocking features include voltage measurement points, and POST LED display. Expect this one to go for over US $200.
    The Z97 Gaming 7 and Z97 Gaming GD65 are two different beasts, although they're in the same price bracket (around $180). The Gaming 7 features an all-PCIe expansion area with modern M.2 slot, while the GD65 features dated mSATA 6 Gb/s. The rest of their feature-sets are identical, even if their PCBs are not. You get a 12-phase CPU VRM, three PCI-Express 3.0 x16 slots (x8/x4/x4 when all are populated), eight SATA 6 Gb/s ports, AudioBoost audio, and Killer E2200 NIC. The story repeats itself with the Z97 Gaming 5 and Z97-G45 Gaming.
    Barring the milder 8-phase CPU VRM, both are similar in features to the more expensive Gaming 7 and GD65, with the exception of two fewer SATA 6 Gb/s ports. At the entry level are the Z97 Gaming 3 and Z97-G43 Gaming. The two are designed for gaming builds with no more than two graphics cards, and offer some legacy PCI slots. The two offer AudioBoost and Killer E2200, but skimp out on the CPU VRM, featuring just a 6-phase one. Storage connectivity is consistent with those of the Gaming 5 and G45.
    Source / Source
    £199.99 - MSI Z97 Gaming 9 AC (Amazon UK)
    £168.20 - MSI Z97 MPOWER MAX AC  (Amazon UK)
    £129.53 - MSI Z97 Gaming 7 (Amazon UK)
    £124.99 - MSI Z97 MPOWER - (Amazon UK)
    £123.86 - MSI Z97-GD65 (Amazon UK)

  • Crash by gaming with MSI z97 Gaming 9 AC/ MSI 980GTX

    Dear MSI Form
    The last couple of weeks I have a very bad crash,
    This is my system:
    Windows 8.1 64
    Mother board: MSI Z97 Gaming 9 AC
    GPU: MSI GTX 980
    CPU: Intel core i7 4790K 4 GHz
    CPU Cooler: Cooler Master Nepton 240M
    Memory: 16GB 4x4 Corsair vengeance pro
    Hard disk: 2 X 1TB 1 X 1TB SSD
    Power supply: Be quiet! Power Zone 650W
    Case: Cooler Master CM Storm Trooper Window
    Fans: 9X Be quiet! Shadow wings + Fan controller
    I use my pc mostly for gaming,
    I bought en build my pc on September 2015 but now and then I get a very bad crash, the crash shuts down my pc (no blue screen / no Error) just a black screen with a pc that won’t respond on anything. The lights are on at my motherboard cpu cooler and GPU, but no respond. To turn my pc on again I have to shut down the main power switch. After 10 seconds I can start up my pc again.
    I get the following windows event: id 41 kernel power
    Scenario:
    This began when I played Dragon age 3 in December, I got the crash twice in like 100 hours. (not a big deal) than I got the same crash once when I played GTA V with 60 hours more or less. But now when I playing the Witcher 3 wild hunt I get it every 5 minutes.
    What did I try to fix it but won’t work:
    - Memtest run x10 no error
    - Drivers up to date
    - The temps under full load are great CPU they won’t go over 51 degrease / GPU 68 degrees / the rest won’t go over 45 degrees.
    - I got no virus.
    - Everything is connected just fine.
    I hope you guys can help me out.
    Kind regards,
    Tijs Dragtsma from the Netherlands

    May be your PSU being too weak or going bad (I doubt though). Although you have 9 fans.. maybe try disconnecting case fans and leave only CPU cooler ones to work?

  • MSI Z97 Gaming 9 AC - Intel Wireless AC 7260 module don't work

    Hi,
    Please help me, i started my new rig and the wi-fi module (that hard to fit in the mobo) don't even appear in device manager.
    I already tried to dismount and remount the module on the motherboard with extreme care, no success.
    Here is my rig:
    Main Board: MSI Z97 Gaming 9 AC
    Bios Version: 1.4
    Video Card: R9 290X
    Memory: 16 Gb Corsair Vengeance 2400Mhz
    Processor Intel 4790K
    OC: Not yet
    Operating System: Windows 8.1 Pro 64
    Please help me 

    Recheck your WiFi Bluetooth expansion module connection on the board.
    Recheck your MB mounting in the case, i.e. errant standoffs. Perhaps test the board outside the case on a non conductive surface to ensure no potential short exists. Then retest with the WiFi plugged in.

Maybe you are looking for

  • Multiple report footers at bottom of report

    Hi, I have a report which has multiple report footer sections, all of which I want to appear at the bottom of the page. When I use the print on bottom of page option in the section expert (for each section), it puts each section on its own page (whic

  • Trouble deleting partions.... Toshiba Satellite P505-S8010

    I have a new Toshiba Satellite P505-S8010.  It can with Win 7 installed.  I hate Win 7 so I want to install Win XP 64Bit Sp2.  I have put the DVD into the drive (and set BIOS to compatible mode). I get to the windows set-up screen were you can del or

  • My screen on iphone 4

    how touchy is my screen on my wonderful iphone 4 or should i use screen protectors

  • Can´t choose certificate when defining VPN connection

    Client is Macbook Pro running SL 10.6.4 VPN gateway is Cisco Users are authenticated using username, password and a digital certificate. The certificate, both root and user, is created on a Windows server (using Microsoft Certificate Services). Root

  • Text on pictures

    New to mac and Aperture...please help...How do I type text on to a picture ?