New mypassport lost screen image while trying to format, now not recocnised by pc, I think I erased it

I tried to format a new WD mypassport ultra external HD and while trying I think I have erased it. The image apeared on my pc screen upon connection but has dissapeares and now shows format not supported when open in finder under devices.

Try Ejecting the drive, unplugging it and then plugging it back in.
I also have a correction, Volume Scheme was for older OS Xs and it should read Partition Layout.
1. Select the Partition tab.
2. Under Volume Scheme Partition Layout select 1 Partition and click on the Options... button.
3. Select GUID Partition Table in the drop down window and click OK.
4. Set the Format to Mac OS Extended (Journaled) and click the Apply button.

Similar Messages

VS 2010 error: 'Error while trying to run project: Not implemented'

I added a new Oracle database project using Oracle Tools for Visual Studio 2010. Once the Oracle database project is added to my Solution, my Visual Studio is no longer able to start the debugger and at times not able to run Test Cases. It error with 'Error while trying to run project: Not implemented'. If I unload the project, VS starts working fine.
Any idea on how to resolve this issue?

I ran into this problem as well, working in a VS2010 solution which included an ASP.NET web project and the v11.2.0.2.1 ODT version of the Oracle project.
Turns out that I was able to solve the problem by removing the Oracle project from the solution, and then adding it back in. From a SLN file point of view, it seems that as long as the Oracle SQL project is located after the Web Application Project that everything works fine.
Note that the SLN file is not organized by alphabetical project name, so changing the name of the SQL project doesn't help; its organized by order of project addition to the solution, so removing and re-adding is the way to go.

'Error while trying to run project: Not implemented'

I added a new Oracle database project using Oracle Tools for Visual Studio 2010. Once the database project is added, my Visual Studio is no longer able to start the debugger. It error with 'Error while trying to run project: Not implemented'. If I unload the project, VS starts working fine.
Any idea on how to resolve this issue?

I ran into this problem as well, working in a VS2010 solution which included an ASP.NET web project and the v11.2.0.2.1 ODT version of the Oracle project.
Turns out that I was able to solve the problem by removing the Oracle project from the solution, and then adding it back in. From a SLN file point of view, it seems that as long as the Oracle SQL project is located after the Web Application Project that everything works fine.
Note that the SLN file is not organized by alphabetical project name, so changing the name of the SQL project doesn't help; its organized by order of project addition to the solution, so removing and re-adding is the way to go.

New LG Monitor Screen Image Keeps Shifting a few pixels left and right / goes into power save mode

I just purchased a new LG Computer Monitor from Best Buy today and hooked it up to my PowerMac computer. Shortly after setting it up, the entire screen image started sporadically shifting left and right a few pixels. And then, at seemingly random times, it'll shut itself down, going into power save mode. I checked the cables to make sure they were secure and they seem to be. Could there be some sort of interference that's causing it? Or would it be the graphics card? My computer is only a couple years old. Please help!

Do you have another computer you can plug the monitor into to test?
Adam
Best Buy Community - Retail, Americas
Forum Guidelines | Terms & Conditions | Community Guidelines | Blogging Guidelines
*Remember to mark your questions solved and click the star under the user's name to show your thanks!

Can I recover photos on iPhone 4S not backed up on iCloud or computer when connect to iTunes error shows up on screen. Was trying to update now it must go to restore.HELP!

Can I recover photos on iPhone 4S not backed up on iCloud or computer when connect to iTunes error shows up on screen? My son was trying to update now it must go to restore. HELP!

If there is no backup of the device to iCloud or iTunes and the device has gone into recovery mode when trying to update, then the data is gone. If the device was connected to iTunes to do the update originally, it is possible the default backup was done, unless your son disabled it. To check to see if there is a backup, go in iTunes, click on Edit, Preferences, Devices and see if there is a backup listed for the date/time before the update was started. If he was doing the update OTA on the phone, then there is no backup. No backup, no photos.

HT201250 Lost events on calendar - Tried Time Machine - would not alter calendar

I was editing some events on my calendar, moving certain events to a new calendar when I noticed that some of them had been deleted when I went back to view them. I tried Time Machine, however, it said that it could not alter calendar as operating system was utilizing it. How can I get these events back?

I have tried all the other suggestions, it will not restore, eventhough I found a data file from October 14, the calendar remains the same. I also have seagate backup however I can't locate the data for calendar on it. I tried the same methods, not working/

Dump while trying to print Delivery note

Hello all,
When I trying to print delivery note containing serial numbers I am getting a dump due to the following reason.
The reason for the exception is:
The system tried to access field "SERIAL_PRINT" with type "u" and length
132 in the current program "SAPLIPW0" using offset 127 and length 6.
Partial field access is not allowed with offset and length
specifications that are
larger than actual field length.
The programs are
Program                                 SAPLIPW0
Include                                 LIPW0F50
Row                                     453
Module type                             (FORM)
Module Name                             STRING_OUT
can anyone help me out on this?
Thanks in advance
Anirban

Please check notes 555306 and 95450.
Rob

Losing connection while trying to format

I'm trying to format my iPod shuffle, and it works - slowly - at first but after about 10 minutes, the iPod loses its connection to my computer and the format never finishes. Does anyone else have this problem? What should I do? I can't even run setup w/o getting past this formatting problem.
Advice please ASAP.
running on win 2000 & 2.0 USB

The format should not take that long. If you are using "front" USB ports, try using "rear" ones instead. Perhaps just try different ports.
If that fails and you can access a different computer, you can restore the iPod there.

Getting Blank Image while trying to capture MPMoviePlayerViewController view using UIGraphicsGetImageFromCurrentImageContext()

HI All,
I have an requirement to capture iPhone screen when my app is in foreground . I have used UIGraphicsGetImageFromCurrentImageContaxt() for this it works in most of synerio but fails when video is playing by using MPMoviePlayerViewController or AVPlayer and gives back black image with player control.
Probabely My guess is MPMoviePlayerViewController rendering frames using OpenGl and method UIGraphicsGetImageFromCurrentImageContaxt() is not able to capture the image ??
I am missing something or is there any alternative soln available to capture iPhone Screen while app is in foreground ??
Looking for your valuable response
Thanks

Please post the details of the application release, database version and OS.
I ran a concurrent request and tried to open "view output", and there is a separate window is getting open, but no data found.What request is that? Is it a seeded or custom one? Does the request complete successfully?
I am using IE only (Mozilla and google chrome is not possible to connect, because some missing plug-ins).Is the issue with all clients?
Please make sure your browser and client OS are certified.
Recommended Browsers for Oracle E-Business Suite 11i [ID 285218.1]
Recommended Browsers for Oracle E-Business Suite Release 12 [ID 389422.1]
Thanks,
Hussein

Blue screen error while trying to install windows server 2003 in Lenovo G500s essentials Notebook

Hi,
I bought a new lenovo G500s essentials note book. It's a freedos system. I am trying to install windows server 2003 in it. But I am getting blue screen error . error message like ths,
Technical Information:
STOP: 0*0000007B (0*FFFFFADF2CE323C0, 0*FFFFFFFFC0000034, 0*0000000000000000, 0*0000000000000000)
Can someone please help.
Regards,
Priya.
Solved!
Go to Solution.

I don't have a similar machine to look at so this is a bit of a guess:
Per page 30 or your user's guide http://download.lenovo.com/consumer/mobiles_pub/lenovo_g400sg400stouchg500sg500stouchg405sg505s_ug_e...:
How can I start the BIOS setup utility?
To start the BIOS setup utility:
1 Shut down the computer.
2 Press the Novo button and then select BIOS Setup
There should be a tab labelled something like "Configuration" and on that page something like "SATA controller mode". Select "compatible" and save and exit.
I'm not certain this will fix your problem, but it's worth a try.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Log in Screen hangs while trying to install upgrade download of elements 13

I downloaded the update of Premier elements 13, tried to run the install. I first get a message that says my machine needs to be restarted and I'm given the option to quit or ignore. I restarted multiple times and still get that message. I click ignore and the initialization process starts and everything looks fine. I get the Sign in required, click sign in, put in my username and password then thats where it hangs. Little boxes just go round and round and no connection. And.. yes, I do have a connection Thanks for your help!
I have windows 7. See the below screen shots. Thanks!

janmendoza
Premiere Elements 13 on Windows 7 64 bit.
From where are you downloading Premiere Elements 13 (as purchased or tryout)?
Please give the following a look with regard to what worked for me with version 12.
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
Please let us know the outcome. If none of the above resolves the matter, we might look at download
of Premiere Elements 13 from another source. More on that later.
ATR

I lost my bookmarks while trying to sync with another device. Can I get them back?

I have tried to sync with a new device. I Had a lot of trouble finding the code which I used last time I synced devices. It seems that I didn't need to do that anymore after signing out and in, it suddenly seemed to work. All the bookmarks that wasn't in folders appered on the new device but the folders didn't. Unfortunately I also pressed the sync button on the old device. Result: the bookmarks that wasn't in folders "returned" to my old device and all the folders are gone.
Since they cootained years of collecting links. I really would like to get them back.
I havn't shot down my device since it happened.
I hope you can help me :-)

hello lisanis, firefox is creating backups of your bookmarks for a certain amount of days automatically. you can press ctrl+shift+B to open the bookmarks library. on the top there is a menu import & backup from where it should possible to restore your bookmarks from a date prior to that sync mishap.
[[Restore bookmarks from backup or move them to another computer]]

Lost my printer while trying to read Mac OS 10.4 install directions

So there I was - happily living and working with Mac OS 9.2.2 on my 450 Ghz G4 - and I decided it was finally time to upgrade to OS 10.4 Tiger for the new bells and whistles. After reading about other people's problems with upgrading I went to my local Mac shop and had a new 80 GB hard drive installed in drive position 3 to use as a backup for my files and as a backup in case my original, Apple installed drive ever went down the river. I bought OS 10 Tiger and opened it as instructed to read all the information staight from the horses mouth. I double clicked the "install" button as instructed and restarted my machine in order to bring up the read me files as instructed in the install booklet. I then quit the disk in order to digest all the information and do the backups recommended in the manual. I then noticed that my printer icon no longer showed up on the desktop ( printer is a HP 1220C which I've been using for 4 years.) When I now try to print anything from any program I get the error message" the file will be moved to the trash because no desktop printer exists for this spool file." I reinstalled the driver provided by Hewlett Packard but the printer icon still doesn't show up. I went to "chooser" and found the printer there and selected it as usual but it doesn't show up on the desktop and still won't print.
What did I do to screw this up? Is this a problem similar to "aborted system 10 installs" I've seen on this forum? How do I bring my printer icon back up onto the desktop? How do I determine if my dealer screwed something up since everything worked fine before they installed the new, backup internal drive? If I go ahead and install OS 10 Tiger anyway, will this bring my porinter back to life?
( The Hewlett Packard "printer utility" still works. I can still print a HP "test" page - but nothing else.) Was I nuts to even consider upgrading to Tiger? Should I have stayed with OS 9.2.2 in the first place? At least it worked.
Help a drowning man please.

Please don't cross-post without a good reason or at least referencing the other thread: see http://discussions.apple.com/message.jspa?messageID=3583500#3583500, you won't get an answer any sooner and it just confuses responders. Please delete this one and stick with the original.

IPhoto garbles image while trying to edit.

I don't even know if garbles is the right word for what is happening, but everyone I've asked is stumped. This problem apparently affects other applications on my computer, like Aperture and Preview, but I first noticed it in iPhoto.
Whenever I attempt to edit a photo, such as by dragging the Shadows slider in iPhoto, Highlights slider in Aperture, or using the Alpha tool in Preview, my picture changes to a wild and crazy assortment of lines and colors, usually lime green and hot pink, though it varies depending on what I'm working on.
I've taken screenshots of the problem. Notice that just the photo I'm editing is affected, not the rest of the computer.
http://twitpic.com/ta8pj
http://twitpic.com/tymza
http://twitpic.com/12bfab
http://twitpic.com/12bgwg
http://twitpic.com/12pcp4
http://twitpic.com/13p2at
I've deleted .plists and reinstalled iLife to no avail. The problem persists inside of a Guest account.
I'm running a MacBook Pro, Core Duo 2.0 Ghz, 2 GB RAM, Mac OS X 10.6.2, with iLife 09 and Aperture 3, though the problem also occurred in Aperture 2. I'm thinking this issue might be Snow Leopard related, or hopefully, 10.6.2 related, since I believe the problem began after running the update. Not sure though.
Any input is highly valued, anybody have any ideas as to what could be causing this? Makes it kinda hard to edit pictures...

This has been reported as a problem and will have to be corrected by Apple - report to Apple - iPhoto menu ==> provide iPhoto feedback
LN

TS1702 iPad is not responding. It ONLY shows an iTunes icon and a USB cable in the middle of an all black screen. Have tried to reset it (not responsive), link to iTunes (not recognized), etc.

iPad is not responding. It ONLY shows an iTunes icon and a USB cable in the middle of an all black screen. I have tried to reset it manually and via iTunes (not responsive), linked it to iTunes (not recognized), etc. Nothing works. This happened after an iTunes updated, after I was asked to "restore" my iPad to factory settings.

Thanks, King_Penguin. Yes, I tryied putting the iPad into recovery mode. It freezes in the black screen with the iTunes and USB cable. When I followed the instructions and then started iTunes, I received the following message: "A required iTunes component is not installed. Please repair or reinstall iTunes (-424040)".
I have unistalled iTunes three times already and donloaded and installed three new versions. No luck.
Thanks a billion once again!

New mypassport lost screen image while trying to format, now not recocnised by pc, I think I erased it

Similar Messages

Maybe you are looking for