New N71 firmware causing errors...

I've just used the NSU to get the latest version for my N71 (version 0526655). Previously I'd been using the side button for voice commands (the default is push to talk). However after the upgrade whenever I use the button in voice command mode I get this;
App. closed: MMFControllerProxyServer07f5b45
App. closed: Telephone
App. closed : [7750608]NssVasCHThread
I have to restart the phone start the apps again. I also used to be able to tap the answer call button on my headset (HS-23) when using the FM radio to switch between preset channels. That's stopped working too.
Anyone else got this? Anyone got any answers?
jbn71

I wouldn't upgrade just yet. I was having some niggly issues with my n71 but nothing that I couldn't live with.
Just upgraded and now I've got a big problem I'd swapped the side button to voice commands (default is Push To Talk). It did work fine, after the update it causes numerous crashes of application (including the phone app) which means I have to restart the phone
Anyone else come across this?
jbn71

Similar Messages

New N70 firmware cause my phone restart randomly

Hi there,
I just updated the firmware on my N70 from version v 2.0xxx to the latest v 5.0616.2.0.3. However, I found a problem is my phone will restart itself randomly, usually every 20-30 minutes. This happens even i did not touch anything on the phone.
It seems the firmware date is 24-04-2006.
My phone model is RM-84
Can anyone help?
Thanks

I too am having this problem with v 5.0609.2.0.1, although I'm not sure of the frequency of the reboots. I'll see if there is a newer version update available as haishan's appears more recent...

IPhone's 3.1.3 firmware cause Error code 9?

Trying to update my phone to 3.1.3 last night and now is throwing error code#9 in recovery mode. Try to recover from different PCs and USB ports, still no avail.
Any ideas???

Error 9: This error occurs when the device unexpectedly drops off of the USB bus and communication stops. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB isolation troubleshooting, using a different USB dock connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software, as described here: http://support.apple.com/kb/TS3125 .

New network card caused: Error Codes: OAMP2OPY:GIQKCQ7V

after installing a network card in my OBIEE 11g server
I get this error:
Error
View Display Error
Error generating view. Error getting cursor in GenerateHead
Error Details
Error Codes: OAMP2OPY:GIQKCQ7V
Too many running queries. Server is too busy to process any more queries at this time.
the server can still connect to the database..
the IP address has not changed..
how do I fix this?

Metalink ID 1462776.1
1. The Oracle Database instance is configured by default to run only 150 PROCESSES;
the maximum load for dedicated connections is determined by the PROCESSES parameter.
When the listener believes the current number of connections has reached maximum load, it may set the state of the
service handler for an instance to "blocked" and begin refusing incoming client connections with the following error (in biserver1.log set in debug level):
"TNS-12516 TNS:listener could not find instance with matching protocol stack"
Tip:
Verify the Oracle database processes parameter setting. It is also a good idea to make sure the Oracle database sessions and open cursors settings are large enough.
2. Increase the number of concurrent client connections (sessions) to OBI server.
Each client request to OBI Server uses one SERVER_THREAD.
Each SERVER_THREAD uses 0 or more DB_GATEWAY_THREADs depending upon the number of DB queries executed.
Following NQSConfig.INI parameters need to be tuned (refer to OBIEE tuning guide for details on initial values to be set):
[ SERVER ]
MAX_SESSION_LIMIT
SERVER_THREAD_RANGE
DB_GATEWAY_THREAD_RANGE
3. Cleanup Web catalog via instanceconfig.xml using the steps documented in "Validating the Catalog" in System Administrator's Guide for Oracle Business Intelligence Enterprise Edition.
4. In instanceconfig.xml file for each instance, add the following parameters within Cache/Query tags:
<Cache>
<Query>
<MaxEntries>10000</MaxEntries>
<AbsoluteMaxEntries>20000</AbsoluteMaxEntries>
<CruiseEntries>3000</CruiseEntries>
<ForceLRU>true</ForceLRU>
</Query>
</Cache>
5. Make sure you have enough system resources available on BI Servers (sawserver, nqsserver).
6. Unstable network connection link between OBIEE servers and Database server.

New keyboard firmware causing issues

I've never had a single issue with my aluminum bluetooth keyboard... today I get prompted for a software update and now I can't play Starcraft without first removing the batteries from the keyboard.. if I use the keyboard I just get repeating keys ad nauseum. It doesn't happen when doing anything else, though. But the second I started playing Starcraft II I was doomed.

I have exactly the same problem. Whenever I restart my computer it automatically goes to windows unless I held down the left alt key and select Mac. With the new keyboard this doesn't work anymore and I have to plug in my old keyboard each time. It seems like the new keyboard is inactive untill the opertating system is completely mounted as even the left-right keys don't work. Very frustrated and considering returning the keyboard unless I can find a solution. I have all the updates installed etc etc. Maybe there's a setting on the computer somewhere?...

Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up. How do I get it to a point that I can delete program?

Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up. How do I get it to a point that I can delete program?

Try booting up in Safe mode (holding down the Shift key while booting). If the software came with an unistaller, use it to remove alll traces of the software - it's nothing that you need and, as you've experienced, can do more actual hard than good (as is the case with most software of this type). When you're booted in Safe Mode, if you can't run an uninstaller, at least check to make sure that there are no Trend Micro items that are set for automatic log in, at least.
Clinton

Problems with the NEW V50 Firmware

Hi all... my nokia 5800 faces some problems here after upgrading to the new V50 firmware, not sure whether have u all encountered it before...
1. Sometimes when typing SMS, the cursor will keep moving backwards and hang there (sounding tut tut tut... continuously and unstoppable)
2. Sometimes the vibration on touching the screen will suddenly become stronger than normal, like suddenly Zeeek, zek, zek rather than normal zek, zek, zek~
I am not sure whther it is common in V50 firmware or it happens only to my specific phone.
Please help !!! Thanks~

A hard reset is needed to clean everything out on your phone. In fact, it is best to do a hard reset BEFORE any firmware update. This is because of possible inconsistencies with system files our own usage may have made. Installation of apps also has an effect, as they create their own system files which are set to be compatible to that of older firmware. New files and new system files coming with the newer firmware adding new features everywhere (this one, v50, in fact from my understanding affects display and icon system files due to the kinetic scrolling in icon menu) may have caused incompatibilities with certain apps. Also one must take into consideration orphaned files caused by installation and uninstallation of apps.
All of these possible incompatibilities may exist on both phone or memory card which both contains system files. First thing, try to run a disk check on the memory card, if nothing happens, you format. If nothing still happens, you reinstall the fw into the phone. If nothing still happens, you put a formatted card and format the phone and reinstall.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

HT1819 Podcasts that I had subscribed to with my old computer are invisible in the Itunes store with my new computer. The error message says the podcast is not available in the US. Yet I can still download them on my old computer. How can I fix this probl

Podcasts that I had subscribed to with my old computer are invisible in the iTunes store on my new computer. The error message says the podcast is not available in the US. Yet I could still download the podcast on my old computer before I switched. How can I fix this?

Hello, ted_marx38.
Thank you for visiting Apple Support Communities.
The most common cause for this issue would be media present that is purchased with another Apple ID. When prompted to authorize the computer it may show a different Apple ID. If this is the case, the computer will need to be authorized for this Apple ID. The article below will walk you through the process of verifying if that is the case or correcting the issue if not.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Cheers,
Jason H.

When we try to restore a iphone 3 sur Itunes and new Lion we have error 3194 can t restore this iphone what can i do ?

when we try to restore a iphone 3 sur Itunes and new Lion we have error 3194 can t restore this iphone what can i do ?
thanks for your kind help

1. Update iTunes - latest version is 10.4.1.
2. Disable ALL security apps (firewall, antivirus/spyware) running on your computer.
3. Don't try to downgrade the iOS version. This isn't supported
4. If you EVER tried to hack thie phone or use apps like tinyumbrella, you may have to edit the hosts file on your computer to remove references to gs.apple.com
5. If your phone has been hacked (jailbroken, iOS downgrade, or unauthorized unlocking), you may not be able to restore the phone to Apple specs again.
"This device is not eligible for the requested build: Also sometimes displayed as an error 3194. If you receive this error, update to the latest version of iTunes. 3rd party security software or router security settings can also cause this issue, to resolve please follow Troubleshooting security software issues. Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod; follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. Also, using an older or modified .ipsw file can cause this error. Try restoring moving the current .ipsw file aside, or try restoring in a new user to ensure that iTunes downloads a new .ipsw."
http://support.apple.com/kb/TS3694
Message was edited by: modular747

P1006 "Firmware Download Error" for non-administrator accounts

Hello all,
I have a problem with a HP LaserJet P1006 when printing from a user account that does not have administrator rights on a new Windows Vista 64-bit machine.
The error message reads: "Firmware Download Error. The printer was unable to communicate with your computer. Please power cycle the printer, check the connection, and try again."
On the original machine, this problem could only be fixed by unplugging and reconnecting the USB cable. On another identical machine, it still prints, but the error message still occurs.
Everything works great when logged in as administrator. Also, there is no error message for the common user when bidirectional support is disabled, but then the printing is horedously slow and ties up the system.
Anyone else see this error message or have any clues what to look for?

Hi! I don't know how it's described in english, but I will try to tell a solution that worked for me. I just changed the security definitions of Windows for this printer. I'm from Brazil and I really don't know how it's show in english version of Brazil, but I'll try to explain: First of all, you need to log in as Administrator in the domain where the printer is installed. So, go to Start -> Configurations -> Printers and Fax Devices (shown "Impressoras e aparelhos de Fax" for me) Select the printer device that is reporting the firmware download error and open it. Go to the Printer menu (Impressora) and Properties (Propriedades). Select Security in the top of window. Ok, all you have to do is modify the Permissions for the users who have this problem. Allow they all to print and manage documents. This proceedement worked for me, and I hope works fine for everyone too. See you, bye. AtÃ© mais, tchau!

IPod problem - firmware update error. Disk write error.

I need your help! Ime just bought a new iPod 60 GB photo (with color display) but when I connected it for the first time to my PC (with Windows XP Home Edition SP 2) using USB 2.0 I got the message: iPod not readable. This iPod needs to be reformatted for use on your PC. Of course I decided to do that. The system had launched iPod updater. It asked me if I wanted to update or restore iPods software however the operation update was inactive (grey). So I choosed restore. Then a new window appeared: Firmware update error. Disk write error. On the iPods display a normal menu was replaced by exclamation mark. I tried to reset iPod, updated iTunes and iPods updater to the newest version and nothing. It still doesnt work. A folder with ! mark comes up. I try to restore once again and it says: Firmware update error. Disk write error.
Please help! What should I do to solve my problem? I want to add that my iPod is properly recognized by the computer system.
Unfortunately, its rather impossible to give back my iPod to the store. It was bought in the U.S.A. and I live in Poland.
Adam

b Firmware Update Failure Possible Solution
-- Disconnect the iPod
-- Right click on "My Computer"
-- Select "Manage"
-- Select "Device Manager"
-- Expand "Universal Serial Bus controllers"
-- Right click on "Enhanced PCI to USB Host controller"
-- Click on "Disable"
-- Click "OK" to accept changes
Run the Updater software (Start==>Run==>iPod) and wait till it says to "Plug in an iPod to update it"
Plug in the iPod and wait (for a long while). It takes awhile because you are now running at USB 1.1 speeds. When it finally shows up, do the "update" or "restore", which ever you were trying to do.
You can try to re-enable the "Enhanced PCI TO USB Host controller" after you are done running the Updater software and try to copy your songs and pictures to the iPod. This may or may not work. If not, revert back to USB1.1.
See: Dirk Brewer, ""Firmware Update Failure", please help" #1, 11:01am Jul 23, 2005 CDT
Also see: http://forums.ipodlounge.com/showthread.php?s=&threadid=94075
http://docs.info.apple.com/article.html?artnum=300836

Getting firmware update error. disk write error message

i installed the lastest ipod shuffle update and when I try to restore ipod shuffle I get the error message "firmware update error. disk write error" have no idea what to do. ipod does not show up in itunes

ok, someone else with similiar problem, I just opened the box 5 days ago, installed iTunes (the June 2005 version) that came on CD with it, ran iTunes, downloaded some music, plugged in Shuffle, goto download, fails, no device found, can see it under XP ok, goto apple.com to find support FAQ, I then ran up Ipod Updater, thinking that since it was new, firmware must be recent (little did I know ) so I thought do the Restore straight off, it started, then failed with the "disk write error" and havent been able to talk with iPod Updater since, then tried installing iPodUpdater to another PC, no luck, then downloaded later versions of iTunes and uPdater, installed on a 3rd PC, same deal, unable to communicate to Shuffle, rang phone support, spoken to two different support people, finally they agree its faulty (something I figured out 4 days ago) and suggest I return it to Apple for replacement, and fill out a Service Request form, which opened a can of new worms, like there is no "Warranty Replacement" option, lots of questions like Credit Card details and nowhere to actually define that I have a "faulty" or "dead" or Shuffle to return and they obviously did not read the comments, that were requested, as they simply sent docking station in the mail, so now back to square one, trying to lodge a Service Request to "replace" a brand new, dead shuffle. Not having a nice iPod experience here !!, but Itunes is good, although expecting it will take a couple weeks all up before I get a working Shuffle to actually download to. Tried again phone support, to sort out this mess, waited in queue, then line goes dead. Oh Well ... I blame my daughter for this heartache, she insisted on having an iPod.

Dell Data Vault causing errors

It looks like Dell installed new software that is causing errors on my XPS 8500. What is it and why is this error coming up?
Faulting application name: DellDataVault.exe, version: 3.9.3.0, time stamp: 0x54cc079f
Faulting module name: DellDataVault.exe, version: 3.9.3.0, time stamp: 0x54cc079f
Exception code: 0xc0000005
Fault offset: 0x000000000001aa84
Faulting process id: 0x1604
Faulting application start time: 0x01d055205d1aef1e
Faulting application path: C:\Program Files\Dell\DellDataVault\DellDataVault.exe
Faulting module path: C:\Program Files\Dell\DellDataVault\DellDataVault.exe
Report Id: a49fdfd8-c113-11e4-bff8-a4173103474a

I'm not sure what issues that data vault service is causing you but I do know many other people including myself have had a horribly unknowing issue with it causing horrible pops and squelching noises while trying to enjoy audio and video on our systems. (mine being an XPS laptop) I've been trying to remedy this for weeks as some people said uninstalling this did not fix the audio/video problem.
What I did not realize was that delldatavault.exe runs as a service in the background. I discovered this while viewing my resource monitor and watching that particular service cause severe spikes in the CPU and disk activity which were the exact moments the interference in the audio/video would occur.
Completely disabling the service altogether, has finally relieved my migraine...

Bug Report : Upgraded to Firefox v10. Holding CTRL+ [F4] too long after all tabs are closed causes error. "Exc in ev handl: TypeError: this.oPlg.onTabClosed is not a function"

Bug Report :
Upgraded to Firefox v10. Holding CTRL+ [F4] too long after all tabs are closed causes error.
"Exc in ev handl: TypeError: this.oPlg.onTabClosed is not a function"

What extensions do you have? (Go to Firefox > Customize > Add-ons to see or Help > Troubleshooting info for a copy-pasteable list)

Oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

New N71 firmware causing errors...

Similar Messages

Maybe you are looking for