New name and soon a new position in the forums

As you may have noticed, we recently changed the name of the Electronics Workbench (Multisim, Ultiboard) board to Circuit Design Suite (Multisim, Ultiboard). There are two main reasons for this change:
The product branding and the name of the board in the forums were not aligned together. We needed to bring this change and we were looking for the right time to do it. Since version 10.0 of the product the name Circuit Design Suite has been adopted for the Electronics Workbench product line.
The second reason has to do with the volume of messages that we have received in this board. In the next week or so, we will move this board up to the Most Active Software Boards section, together with LabVIEW, LabWindows/CVI, TestStand and so on. In one year this board has had enough messages as to be included in that top spot. Again, we have to make sure the name is aligned with the product that we ship.
I would like to thank you all for the professional and invaluable cooperation, input, discussion and feedback that over the past 1 - 2 years have made this board one of the most active ones. It is in the best interest to have an open space for users to discuss matters related to the software they use, as well as to provide constant feedback for the NI team in charge of improving and developing this product line.
Best regards,
Nestor
National Instruments

Jeff, I politely disagree here.
My reason is because clicking the "View Result" *SHOULD* provide the same experience as you are advising. At that point, RoboHelp is simply opening the browser and handing things off.
Gwen, this causes me to ponder the following question. In recent versions of RoboHelp, it's possible to configure more than one Table Of Contents (TOC). Are you certain you have specified the desired TOC in your SSL recipe? That's what I'd be checking.
Cheers... Rick

Similar Messages

  • TS5223 i have change my name and my icloud is still using the old account. how do i change it to my new apple ID on my iphone without deleting the backup already in icloud

    have change my name and my icloud is still using the old account. how do i change it to my new apple ID on my iphone without deleting the backup already in icloud

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, and your old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • HT201493 When I add a person in io6 their email is only displayed not their name and picture from my contacts that the email is associated with, why?

    When I add a person in io6 their email is only displayed not their name and picture from my contacts that the email is associated with, why?

    The whole idea to an icloud account is that one user uses it and has all their devices synced together.  Different users need different Apple IDs to create their own icloud accounts.  Note that everyone can still use the same ID for an iTunes account (to share purchases).
    To create a new icloud account, go to
    http://www.apple.com/icloud/setup/

  • I created a Group and put in all names and email addresses but cannot get the group to appear in an outgoing email message.  What am I doing wrong?

    I created a Group and put in all names and email addresses but cannot get the group to appear in an outgoing email message.  What am I doing wrong?

    This may help.
    Can't connect to the iTunes Store
    What happens whenyou try to connect? Error messages?

  • Type the name and password of a user in the "(null)" group to allow this.

    To connect to wifi while in the recovery partition, I'm asked to authenticate the wlan's certificate, and in order to do that I'm asked for "the name and password of a user in the "(null)" group" to make changes to the Certificate Trust Settings. Anyone know what or which user may this be?
    I'm not able to pass from the initial apple screen when I boot, so I wanted to repair or reinstall Lion, but in order to do that I need to connet to the WLAN to download it.

    Hi, I called Apple Support this day, and the answer is that enterprise WPA wireless is NOT supported by Lion Internet Recovery.
    You can find the supported configurations and protocols on Apple site:
    http://support.apple.com/kb/HT4718?viewlocale=en_US

  • If i pass the SEGMENT NAME and its SDATA can i get the all IDOCs?

    Hello
    If i pass the SEGMENT NAME and its SDATA can i get the all IDOCs of these values(sdata) holding? is tehre any standard SAP function module?
    Moderator message: please search for information and try yourself before asking.
    Edited by: Thomas Zloch on Aug 23, 2011 2:44 PM

    Hi Uwe,
    Thanks very much for your reply, now I have another problem .
    Only the authrotiy field in the authority object is not '*' shall I check for the authority, how can I realize this?
    thanks very much for your help.
    Lament

  • I just set an administrators name (my full name) and password for parental controls (using the one I always use) and now after restarting and trying to make changes to aprental controls it does not recognize my password

    I just set an administrators name (my full name) and password for parental controls (using the one I always use) and now after restarting and trying to make changes to aprental controls it does not recognize my password

    Hello, do you have another admin account to log into for a test?

  • I already have creative cloud Photography plan and just want to add dreamweaver, is this possible?  Alternatively, I have tried purchasing the Complete - For CS Customers but it asks me to contact customer support and then sends me through to the forums!!

    I already have creative cloud Photography plan and just want to add dreamweaver, is this possible?  Alternatively, I have tried purchasing the Complete — For CS Customers but it asks me to contact customer support and then sends me through to the forums!!

    yes.
    contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

  • In order to download the new iTunes update I have to enter my administrator name and password.  When I enter the correct name password it won't put me through.  How do I fix this?

    In order to download the new iTunes update I have to enter my administrator name and password.  I am having trouble.

    Hi johnsherrard,
    If your iPhone is currently disabled due to a password issue, you may find the following article helpful:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Regards,
    - Brenden

  • HT204053 setting up my new ipad. under new account i cloud  imap where do i get by incomming mail server host,user name and password. will it also be the same infor for outgoing mail server

    setting up my new Ipad. Under icloud Incomming and outgoing server Where Do i get the host name,user name and password?

    It should setup email automatically when you enable it in your iCloud account.
    If not, here are the settings: http://support.apple.com/kb/HT4864

  • Why this slightly new position for the "Auto"-Tone button

    In LR CC(6), Adobe moved the "Auto"-Tone button in the development section one button width to the right. Why?
    Since the mouse moving from the white balance to the Auto-button is a very often used move, clicking to the old position (in the now empty) is very annoying.
    Old Position of the Auto-Button
    New Position:
    Why? Is there any reason? Or is this a bug - an accidental move?
    Thanks
    Konrad

    I am willing to bet it was accidental, because if I were to move it, I probably would have aligned it under the "As Shot" above it. Either centered or left or right aligned, but aligned in any case.
    You either have a really good eye, or your muscle memory is fantastic. Either way it is impressive that you spotted the change.

  • Adding caller with name and number from call list to the contact list only inserts the number and not the name

    I recently bought a BlackBerry Z10 and moved my cell service to Rogers to take advantage of the name display service offered by Rogers (Fido also offers this service).
    Due to the number of calls that I receive from first time clients, I wanted the name display service to help me know who was calling. Evidently it is impossible to add clients to my contact list before they call me so I'm constantly seeing numbers that have no name to help me decide if I want to answer the call.
    When I try to add a caller from my call list to my contact list, only the number gets inserted in the new contact. The name needs to be entered manually.
    I understand and realize that not all call display formats are the same and that it's virtually impossible to parse the first and last names from the name portion of the caller id.
    However, I would like to see BlackBerry add the functionality to insert the name portion of the call entry from the caller list to a "Nickname" entry in the contact list just like it adds the number to a "Home", "Mobile", or "Work" entry in the contact list.
    If a user doesn't have a name display service, there would be no change to how their contacts are added because there is no name variable to copy over.
    Can someone from BlackBerry please let me know if this feature can be added to BB10 and when it can be added? For me it's an obvious feature that should just work.
    I am really enjoying my Z10 but I'm feeling let down that something so logical and helpful is not supported out of the box.
    Regards,
    Marc

    Hey ViciousFerret,
    It appears that you are not aware of the fact that both Rogers and Fido offer name AND number display service (although the name display feature is an add-on service) and have been offering it for many years (since 2006). Here is a link to the name display service description of each provider...
    http://www.fido.ca/web/content/manageyourcalls/calldisplay&lang=en
    http://www.rogers.com/business/on/en/smallbusiness/products/wireless/addons/valuepacks/
    As you can see from the link below, Rogers and Fido have been offering this service since 2006.
    http://www.businesswire.com/news/home/20060914005951/en/Teams-HP-Rogers-Wireless-Fido-Succeed-North
    My BlackBerry Z10 shows both the name and number when someone calls (and the caller is not in my contact list).
    All I would like is for the Z10 (and Q10) to support the addition of the name and number from the caller list to my contact list without me having to type the name. As I mentioned in my original post, to avoid the OS having to parse the first name and last name from the name portion of the caller list entry the name could simply be added to the contact list as a "Nickname". If your provider only has number display, nothing would have to be copied from the name variable in the caller list to the contact list.
    I find it difficult to believe that BlackBerry would not be aware of this name display service since it's been around since 2006 with both Rogers and Fido.
    I hope I have clarified the reasons why I would like to have this feature added to BB10 and how it's surprising that this simple feature is not already a part of the BB10 OS.
    Either way, I don't think this is a difficult feature for the BlackBerry team to add. They're just copying a 2nd variable from the caller list to the contact list.
    I'm surprised that Rogers hasn't asked BlackBerry to add this feature to their phones. I think it would be a popular feature for those who receive a high number of calls from first time callers.
    How can I get this feature request to BlackBerry for their consideration?
    Cheers,
    Marc

  • When I try installing Firefox 6.0 from the binary file, a box with "Run As" in the type field appears, which asks me for user name and password. Please advise about the course of action that I should take.

    Trying to run it as the current user, or as one from a different account(administrator in this case) also doesn't work.

    I think the client is not able to do a HTTP POST
    to the WLS server but it can do a HTTP GET.
    I dont know why.
    http://manojc.com
    "Ganesh" <[email protected]> wrote in message
    news:3eba91bc$[email protected]..
    >
    Hi,
    I deployed a rpc web service using WLS 7.0 SP2 in HP-UX 11 environment.When I
    invoke the web service through my browser (IE 6.0) using the web servicesurl,
    it brings my service method correctly. From there, if I click the invokebutton
    it asks me for a network user name and password under "weblogic" realm???If I
    provide the admin user credentials (which I supplied while creating mydomain)
    it is not accepting that it keeps popping up this network user passwordwindow
    over and over. Not sure which username/password I have to provide here tosee
    the result of my service.
    If I try to invoke the web service through my client (static) I am gettinga connection
    refused exception. I guess either way, I am not able to access my webservice.
    In the attached file, I have cut and pasted the client stack trace as wellas
    the server log trace from weblogic.
    Any ideas would be highly appreciated.
    Thanks,
    Ganesh

  • How can I get the administrators name and password so I can download the latest os this is a refurbished iMac

    How can i find the administrator name and password for my  iMac .
    This was a refurbished product purchased online and i need this info to download new things form the apple store ?

    See #5
    Step by Step to fix your Mac

  • After fixing all of the names and artists in iTunes their still the same on my iPhone?

    I just finished renaming song titles and artist names on my iTunes but they're still messed up on my iPhone. Only a few that I changed are correct. I autofilled the songs and they should have all synced into my iPhone but the songs on my phone still have incorrect artist names and song titles. I have no idea what's wrong. I've been at this for almost 3 hours.

    If your tags are correct in iTunes, but incorrect on your phone, you could try removing and resyncing your music library to your phone.  Open iTunes on your computer and verify that you have selected "Keep iTunes Media Folder Organized" in iTunes>Preferences>Advanced.  Connect your phone to iTunes, uncheck syncing music on the Music tab in your iTunes sync settings on your computer, sync (which will remove your music from your phone), recheck syncing music on the Music tab, sync again (to restore the music to your phone).  Hopefully you will get the correct tags on your phone now.

Maybe you are looking for

  • What's wrong with this simple java file

    I am learning java input methods. When I tried to compile the below simple java file, there were two errors. import java.io.*; public class MainClass {    public static void main(String[] args)  {     Console console = System.console();     String us

  • Show results from the database to html tables?

    Hi, I am a PHP programmer and did a successful CMS program for a company. Now I have another project which is a web based system. I basically know how to do it and finish it in PHP.. but I am trying to do it using J2EE.. I am trying to learn J2EE now

  • Making non-movable columns in a JTable

    I'm working on making a JTable and I don't want the user to be able to rearrange the columns. Does anyone know if this is possible and if so, how to do it? Thanks so much! :) Adrienne

  • How can I override the hyperlink underline in mac mail 4.5 OS 10.6.8

    I have designed a signature with hyperlinks to my email and my website. No matter what I do, I can't seem to remove the underline that accompanies the link ability. I have tried command U and by going through the menu options in the Font section. Doe

  • WHY THE HELL I CAN'T UPGRADE FROM NSU?!

    Dear Nokia, Before, I was used exact the same connection type for the upgrade. But now, I can't seem to use it again, 'cause it's always say that my connection have some problem, I heard that there was a problem in Nokia. There is a question for this