New NANO and the iTrip

Hey Guys, i got a iTrip during the week as a gift and i'm just wondering will it work with my new iPod Nano when it arrives. The iTrip i have is this one:
http://www.iaccessorise.com/ipod-accessories/fm-transmitters/griffin-itrip-nano/ country=IRE?gclid=CMjevZTKxIcCFQe6XgodFWw3GQ
Any Takers?
If that one work work i can exchange it for this one, if its any use either. http://shop.ipodworld.co.uk/iPodWorldSite/product/alliPods_FM%20Transmitters/GR21-WHITE/Griffin_iTrip_with_Dock_Connector_-White.htm
Let us know if either will work or even where i can get an iTrip that will work!
Cheers Guys!

The new nano is actually a little bit thinner so it should fit on, with out as much support for the actual adapter.

Similar Messages

  • New nano and the broken shuffle that won't go away in iTunes

    Situation: Had a 512 Shuffle for less than a year before it fizzled out. Bought a new 1G nano just this week. Love it but some problems with iTunes. (Running Windows XP)
    The ONLY time that iTunes will recognize the new nano and let me update it is if it is plugged in through a restart of Windows. Everything works great then. I can update it to my heart's content.
    Any OTHER time when I plug in the nano iTunes "sees" it as the old shuffle, which is of course dead.
    I've tried multiple uninstall/reinstall (the Windows way, right?) of both iTunes and the iPod software. But there is something lingering in there that makes iTunes keep going back to the broken shuffle's playlist.
    Any suggestions?
    Dell   Windows XP Pro  

    s'okay!
    ... this is a long shot. but what i'm wondering is if you've got a very weird version of this particular issue:
    Windows confuses iPod with network drive and may keep iPod from mounting or songs may seem to disappear
    (it would be a "doubled" version of this problem. Windows starts misidentifying the shuffle as the other drive, and an ipod_control folder makes its way onto the other drive. then when you plug in the nano, you get the confusion again, Windows sees the ipod_control folder on the other drive, and ends up thinking that that's the old shuffle ... that's the long-shot theory, at least ...)
    love, b

  • Need help on how to help my sister register her new nano and add music to it on my computer. I have my on nano already on my computer registered and set up but she and I don't listen to the same music so how would I go about doing this?

    I'm trying to find out information on how to go about helping my sister to register her new nano and load on CD's and such. I have a nano and already know how to do this but she is from CA and we want to load it here on my computer. She will be going home in 2 weeks and wants to use it in the car for the ride home.We don't listen to the same kind of music so I don't want to use my library but do one of her own for her. Also she will want to add this library on to her computer at home. I'm 60 and my sister is 70 I have enough knowledge to do some things on the computer but am not real computer smart. My sister is just learning about everything but has no idea what to do with that knowledge. Can anyone give me and idea on how to do this that I can get a grasp of what needs to be done to do this? My nephew says it's easy but he's in Az and I'm here. He also helps people with computers so he is more knowledgeable than I am. Would appreciate any help on this. thx

    See the procedures below for removing a device from Find My iPhone when you can't do it on the device itself.
    iCloud: Remove your device from Find My iPhone

  • I have an iPod touch that is synced with my library.  I just got a new Nano and I want to sync that with the same library but I can't figure out to do it with iTunes 11

    I have an iPod touch that is synced with my library.  I just got a new Nano and I want to sync that with the same library but I can't figure out to do it with iTunes 11

    I watched the new itunes tutorial, and if you double click on the  blank part of the bar that says music, videos, apps, etc, a button will show with your ipod's name.

  • I just got a new nano and downloaded the most up to date itunes then I plugged it into my computer and it does not turn on at all, no charge image and my computer doesn't even recognize that there is a connection. How do I fix this?

    I just got a new nano and downloaded the most up to date itunes then I plugged it into my computer and it does not turn on at all, no charge image and my computer doesn't even recognize that there is a connection. How do I fix this?

    By calling iPod tech support while you are under warranty.  You also have 14 days to return it w/no questions asked for a replacement or your $$$ back. 

  • I just bought a newer Nano and I need to upgrade my itunes for a laptop (with Windows) that no longer has the capability to go online.   Is there a way to do this?

    I just bought a newer Nano and I need to upgrade my itunes for a laptop (with Windows) that no longer has the capability to go online.   Is there a way to do this?

    Hi John,
    Thanks for your response, but if you read my first mail, it's the original serial number that I don't have. I bought the original LR as download and have misplaced the serial number. Is there any way to find it???
    Linda

  • IPod Nano and Griffin iTrip

    My iTrip works occassionally with my nano, but often I'll try to use it and all I hear is static on the radio and the iTrip doesn't even turn on. I've tried resetting my ipod and that hasn't helped. Any suggestions? Thanks!

    I had the same problems to start with, i tried everything and installed the new software which froze my ipod. In the end i just set my radio frequency to 87.9 which is the frequnecy the itrip is automatically set to and it played perfectly, i didn't have to mess around trying different frequencies. It may not work for you but worth a try!!

  • How can I sync my old music library in my new nano to the new library???

    CAN'T COMBINE MUSIC LIBRARIES: 
    Got a new 6th gen nano.  X-ferred my old music lib to new nano.  Gave my old nano to my hubs and he erased most of the music and added his own.(so, he has the same name for the old nano that I was using)  Now, when I try to add more music to my new nano, I get a message asking me if I want to erase all the music content and add the new stuff. Well, of course I do not want to do this as I have hundreds of songs in the old music library.  I also get a message saying that the old music lib is associated with a diff account name and I cannot have 2 music libs running on one iPod.  Can anyone tell me how I an get the two libs combined?  Do I need to back up the old music and add it to the new lib? Or, can I add the new music (only about 50 songs) to the old lib?  (the latter would be much easier, as it would take 10-12 CD's to store my old lib and much time burning the cd's. I naively thot that I could add music to the new nano under the same music lib as the old nano.  HELP!

    iPod Nano: Multiple Users- Single iTunes

  • I have an iPad w iTunes. My hubby just got a new nano and I'd like to sync our music to his nano, but dont know how. Help we've already taken a great mp3 back to exchange it for this nano.

    I have an iPad w iTunes, my hubby just got a new nano and we would like to sync music from my iPad (and not lose my songs in the process).  I do not have iTunes on a pc so I don't know how to share music. 

    There is no way to share your music on the iPad to his Nano without a computer - that I can think of anyway. No third party application will work unless both devices have WiFi and many of them require a computer as well.
    I would suggest downloading iTunes on your PC, transfer your music to the iTunes library and then sync the Nano.
    Maybe I am missing something but I don't think this is possible as you are currently set up.

  • Just bought a new nano and it doesn't have Mickey Mouse clock.  Can I download it?

    Just bought a new nano and it doesn't have Mickey Mouse clock.  Can I download it?

    Update it in iTunes. Then you will see that you have the clock faces you are looking for.
    i

  • Got a new nano, and it synced all music of my daughters music.  can i get them off my nano

    I received a new nano and when I plugged it in, all of my daughter's music synced.  Can I get rid of all that music from my nano?

    Are you two using the same iTunes library? 
    How you delete content from your iPod depends on how it is set up to receive content from your iTunes library whether that be via automatic syncing or manual management.
    For automatic syncing, you must reconfigure your settings so that the album/tracks/content you wish to remove is no longer configured to sync to your iPod.  For example, if the Sync only checked songs and videos option is enabled from under the iPod's Summary tab, make sure all the tracks for this album do NOT have a tick mark next to them in your iPod.  Then resync your iPod with iTunes.
    If that isn't the case, you'll want to look at the iPod's Music configuration tab.  You can access this tab by selecting your iPod under Devices. This should bring you to theSummary tab over to the right.  Look for the Music tab along the top and select it.  Here you can configure how and what music syncs to your device.  If you make any changes to this tab, be sure to hit the Apply button in the lower right hand corner to sync the updated changes to your device.
    Otherwise, if you manually manage your iPod's contents, you must manually remove content from it.  You can do this by plugging your iPod in and clicking the small black triangle next to your iPod from under the Devices section in the left hand pane of iTunes.  This will open up a submenu of content that is indented underneath the name of your device, so go ahead and click on Music (or whatever content you are wanting to remove).  Locate the track or tracks/content you wish to delete. Highlight them and hit the Delete key or choose Edit -> Delete.
    Otherwise, if you are using different iTunes library, simple connect it to your own iTunes library and restore it to factory settings.  To do this, select your iPod under Devices in the left hand pane of iTunes and click the Restore button that appears to the right under the iPod's Summary tab.
    B-rock

  • IPOD Nano and the mother ship

    I have a new Nano and without thinking it through, set it up with my Macbook. It would have been better if I set it up with my IMAC who is the mother ship of music. What are the consequences of my just plugging it into the IMAC? If that is not a smart idea, how else can I get the music off the IMAC into my Nano?

    What are the consequences of my just plugging it into the IMAC?
    iTunes will ask if you want to change the library it's set to sync with; doing this will erase its current contents and transfer music from the iMac to it. This won't happen if it's set to sync manually, in which case the music can be dragged to it in iTunes.
    (44014)

  • Error while adding a used relationship between the New DC and the Web DC

    Hi Gurus
    We are getting the Error in NWDS while Adding  a used relationship between the New DC and the Web DC.
    Steps what we are Done
    1. Create the custom project from inactiveDC's
    2.creating the project for the component crm/b2b in SHRAPP_1
    3.After that we changed the application.xml and given the contect path.
    4.Then we tried to add Dependency to the custom create DC we are getting the error saying that illegal deppendency : the compartment sap.com_CUSTCRMPRJ_1 of DC sap.com/home/b2b_xyz(sap.com.CUSTCRMPRJ_1) must explicitly use compartment sap.com_SAP-SHRWEB_1 of DC sap.com/crm/isa/ like that it was throwing the error.
    so, we skip this step and tried to create the build then it is saying that build is failed..
    Please help us in this regard.
    Awaiting for ur quick response...
    Regards
    Satish

    Hi
    Please Ignore my above message.
    Thanks for ur Response.
    After ur valuble inputs we have added the required dependencies and sucessfully created the projects, then building of the  projects was also sucessfully done and  EAR file was created.
    We need to deploy this EAR file in CRM Application Server by using the interface NWDI.
    For Deploying the EAR into NWDI, we need to check-in the activites what i have created for EAR. once i check-in the activites ,the NWDI will deploy the EAR into CRM Application Server.
    In the Activity Log we are able to check the Activities as Suceeded but the Deployment column is not showing any status.
    When i  right click on my activity Id the deployment summery is also disabled.
    So finally my Question is that where can i get the deployment log file, and where can i check the deployment status for my application..
    Any pointers in this regard would be of great help..
    Awaiting for ur valuble Responses..
    Regards
    Satish

  • Trying to load illustrator 6cs onto new mac and the old activation code for my ill cs doesn't work with it

    Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it.  Do I need a new code or am I missing something?  Same goes for my Photoshop cs.

    you need your serial number.
    if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html

  • Somtimes Firefox loads a blank page; the Tab says "New Tab" and the URL is always "about:blank". What's up with that?

    Using Dogpile, I search and a list of URLs comes up. I select and click on one and Firefox opens a new tab. It responds promptly with a blank screen. The Tab says "New Tab" and the URL says "about:blank". The last one came up slowly in IE and turned out to be nothing more than a large pdf. Can you help me figure out what is happening and how to fix it, please? It is happening far too often. Running the virus, etc. software has not stopped this problem. Thank you very much for your help! Hutchy

    Using Dogpile, I search and a list of URLs comes up. I select and click on one and Firefox opens a new tab. It responds promptly with a blank screen. The Tab says "New Tab" and the URL says "about:blank". The last one came up slowly in IE and turned out to be nothing more than a large pdf. Can you help me figure out what is happening and how to fix it, please? It is happening far too often. Running the virus, etc. software has not stopped this problem. Thank you very much for your help! Hutchy

Maybe you are looking for

  • Help needed for using BASIC authentication through JDBCRealm

    Help needed. Hello, I am doing a degree project, so far it works fine in my local machine, I need to try it on my virtual hosting (as it is a live server). My project requires JDBCRealm, that is BASIC authentication loading access data from mysql dat

  • How can I restore my iPhone from an icloud backup

    How can I restore my iPhone from an icloud backup? Last time i restored my iphone was yesterday, and some of my photos got deleted. So I thought of restoring my ipod, but it ended up restoring it from a 2011 backup... help???

  • Tabindex not working in contact form (AS2)

    Hey everyone, I have a contact form on my site for which the text inputs are  created via AS2. This works fine but I cannot get the tabbing to work  (or even have any effect) no matter what I do. I have a menu that  sometimes displays at the top, som

  • Running from command line

    Can anyone suggest any tutorials that will explain running a java prog from the command line in windows. So far all I have used is NetBeans. The prog I am looking at the moment requires parameters to be put in when it is run, and I assume that that c

  • [JDev11g]: ADF Security and Weblogic 10.3

    Hi i using my owen custom loginmodule configured jps-config.xml using ADF security.. how to deploy to Weblogic 10.3 , is it supported directlly ? where can i put the jps-config.xml , or how to configure? can any body share some steps? thanks