New nano, old itunes

I connected my new nano to the current version of itunes when I got it about a month ago. Since then, I have reinstalled operating system/softwear from original discs (OS X 10.4, iTunes 4.71). As I am attempting to figure out if my hard drive issues are softwear or hardwear related (all seemed to start after updating iTunes) I'm reluctant to update again. My nano's battery is wearing down, and I'm not sure what will happen when I connect it. I had it set to manual updating. All I really want to do is charge the battery. Any guesses?

I understand that, but among our friends and relatives, we do not have any problem with iTunes 7. Have you try the following
Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”

Similar Messages

  • Error Message working with new Nano and iTunes

    Posts: 15
    From: Petaluma Ca
    Registered: Aug 29, 2004
    Unlock iTunes / get write permission
    Posted: Dec 26, 2006 6:02 PM
    Reply Email
    Wanted to upload some songs from my iTunes Library to new Nano.
    Hooked it up, went through the promps, choose two playlists to load, and before we could say oops, we saw that it was infact loading the entire library. We had no way of stopping the process so we unplugged it.
    Now when I try to open iTunes it I get an error message :"The iTunes Library file is locked, on a locked disk, or you do not have write permission for this file."
    I verified permissions and repaired them. No luck.
    Help! Please!

    i'm assuming the Error code HRESULT: 0x800763b3 means something and is the solution but where can i find the answer or am i going about this all wrong?
    Yeah, this 0x800763b3 is a slightly unusual one. Normally with these, the iTunes install error code matches the error codes that people get on their Windows Update failures. But for the last two 0x800763b3s I've been involved in on an iTunes install (Liv and someone else), the 0x800763b3 on the iTunes install has been associated with an 0x8007000b on the Windows Update failures. (Liv's 643s were pretty much "generic" error message codes for Windows Update failures, which could mean anything. So that's why I/we went after the 0x8007000b, which has some Microsoft documentation on fixes.)
    Doublechecking on other symptoms of your situation ... is your Windows Update not opening at all when you try to launch it?
    If so, when you click "Turn Windows features on or off" in the "Programs and Features Control Panel" item, is the Windows Features dialog box empty? (No features are shown?)
    (If we can't get the codes from the windows update failures, we might be able to make some progress if we can identify other symptoms that you're getting. I know some documentation for some of these codes that mentions the Windows Features thing as a possible additional symptom.)

  • New nano - old i-tunes

    Just connected new nano. Says I need itunes 7.4.2. Went to download. Site unavailable. Can't disconnect. Hostage situation. Any idea when site will be available?

    The site appears available to me from the link below. Have you tried since your post?
    iTunes download.

  • Can you use new Nano with iTunes 6?

    I'd like to get the new iPod Nano, but I have Mac OS 10.2.8, so I can't get iTunes 7. It says on the system requirements that I need 7, but is it really necessary? (i.e. is it possible to use the new iPod Nano with iTunes 6?)

    Welcome to Apple Discussions!
    While I haven't tried, I would image the answer is no.
    Usually when iPods are released with a new iTunes version, they aren't made to be/are made not to be compatible with previous iTunes versions.
    It may work, but I can't be sure either way (someone else may have tested this).
    In the past, even if iTunes updated the iPod, there tended to be problems syncing.
    btabz

  • TS1363 I can not put my music on the new nano because itunes does not recognize my ipod.

    I had an ipod nano 5th gen and bought the new nano with a completely different loading dock. The computer tells me to reinstall itunes but im not sure why beacuse all my music is saved on the account i created for the last one. Do I have to reinstall itunes for my computer to recognize the new ipod? What will happen to my music?

    Do I have to reinstall itunes for my computer to recognize the new ipod? What will happen to my music?
    What is the exact error message you are receiving?
    As to re-installing iTunes, it will have no affect on the content you actually have stored in iTunes such as your music. After you finish re-installing iTunes, everything should be right where you left it in your iTunes library.
    B-rock

  • New Computer, Old iTunes

    My old computer died on me so I now have a new one. How can I upload my old iTunes account with all of my music to my new computer?

    *How can I upload my old iTunes account with all of my music to my new computer?*
    Do you have any of your music from the old computer backed up? If you didn't make a back-up of your purchases to restore from then I'm sorry to say that the policy on lost purchases is that you have to pay to download them again:
    "Once a Product is purchased and you receive the Product, it is your responsibility not to lose, destroy, or damage the Product, and Apple shall be without liability to you in the event of any loss, destruction, or damage." iTunes Store: Purchased content can be downloaded only once
    You could try contacting the iTunes Music Store Customer Service and you might be able to persuade them to sanction a second free download. There have been occasional reports in the iTunes forum of this happening, however just be aware that they are not under any obligation to do so. If you click on any of the links on this page you'll find a space at the bottom to email your query: iTMS Customer Service
    If you have an iPod that still has the purchases on it the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer

  • New nano requires itunes 8 but windows2000 wont run itunes 8.........???

    i have just installed itunes 7.3.2 on to my lap top which is running windows 2000 (itunes8 wont run with 2000) but my new nano wont sync with it and asks for itunes 8, any ideas how to get around this????
    thanks

    You have a couple of options:
    1) Upgrade your computer
    2) Upgrade your operating system
    3) See if any of the third party software apps will allow you to at least sync your Nano'
    http://en.wikipedia.org/wiki/Comparisonof_iPodManagers
    Best of luck

  • New Nano – Old Comp

    Hi Gang,
    I just got a new 8GB ipod nano, and was heartbroken to discover that I could not use it with my ancient Win2K comp Why would Apple require that I upgrade my Microsoft OS? Shouldn't I be able to use my ipod with any 32-bit OS that supports USB? Besides upgrading to XP or Vista, what does Apple recommend that I do in order to enjoy this expensive, yet currently useless, piece of hardware?
    Thanks in advance guys!
    Kortney Sexton
    ~Support Abandoned Pets for Teens dot com~

    Why would Apple require that I upgrade my Microsoft OS?
    Newer versions of iTunes are required to communicate with newer iPods, and these versions aren't written for older OSes.
    Shouldn't I be able to use my ipod with any 32-bit OS that supports USB?
    Only as an external USB drive.
    (32451)

  • New computer old itune acct on backup hard drive - how sync?

    I have a new computer and the hardrive of my dead computer plugged into it but it wants to erase my iphone to sync. How can I get the old itunes acct on my new computer?

    if you want easy point and click stuff Home Sharing is pretty easy.
    iTunes 9: Understanding Home Sharing
    http://support.apple.com/kb/HT3819
    iTunes 9: Troubleshooting Home Sharing
    http://support.apple.com/kb/TS2972
    You can set it up to automatically transfer a purchase made on one computer to the other using Home Sharing.

  • New Computer/Old ITunes account

    I had to return my computer to my former employer. Now that I am all set with a new computer I am trying to get back to my old ITunes account. Can't seem to find how to do so. Can anyone help me out?
    Thank you!

    Just sign into to your account.
    Store>Sign in
    You could find this out by opening itunes, clicking "Help" and typing "Sign In".

  • New ipod, old itunes HELP!

    my ipod recently got stolen & i purchased a new one. Both are ipod videos 30 GB. but now that i have this new one my itunes doesnt do anything when i plug it in and i cant upload my music, videos, ect. onto it. I have TONS of songs and i do not want to lose them.
    How can i get these songs onto my new ipod?
    if i delete itunes and reinstall it wont i lose everything?
    video 30GB   Windows 2000  

    Have you had a chance to look at this troubleshooting document? It may be of some help: iTunes 7 for Windows doesn't recognize iPod

  • New Nano, Old Computer

    So wife just bought a ipod nano but itunes won't recognize it, even though the computer itself does see it. Any workarounds to make itunes 9 see it and work with it? Can I reformat the nano into something that my OS (10.4.11) recognizes?

    No, you will need to use your computer that has Snow Leopard on it that is listed in your settings.

  • New Nano, Old Troubles

    I just got my amazing 8GB black iPod Nano. It is so small, and at the same time, so big. I have a question, that I kwno has been answered before, but I am to lazy to look it up. So, how do you sync your new iPod to your _old and same iTunes_?

    It should update your new Nano so I'm not sure what the problem is. Can you be more specific when you say "nothing happens"? Do you mean there is no message on the Nano screen saying it is syncing? No indication on the computer at all that you plugged in a Nano or that you clicked the sync button? No error message?
    I assumed you've tried restarting your Mac as well as resetting your Nano. Is this a brand new Nano? If nothing works, it would be time to give Apple a call.

  • Got new nano now itunes does not find old nano

    Used two 1st gen. nano's fine with itunes. Then purchased 2nd gen. nano and that works with itunes but now the two 1st gen. nano's do not appear on itunes and screen freezes. When i unplug, itunes starts operating ok again. Can you help?
    AMD Athlon 1.8   Windows XP  

    More information. I started iTunes today and attached my iPod shuffle (old style shuffle). iTunes did not eat up the processor and worked fine.

  • New Nano, old macbook - help

    Is there any way to download itunes from iPad to iPod Nano?  My mac book is apparently too old and my son's new iPod Nano won't register and itunes won't update as os x version is needed and we don't have it.  Updating everything makes it a costly Nano.

    Welcome to the Apple Support Communities
    You have an Early 2009 MacBook, so the upgrade will be cheap. iTunes 11 needs Mac OS X 10.6.8, so buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    Then, make a backup of your files, insert the disc and upgrade. The disc has got Mac OS X 10.6.3, so after upgrading, open  > Software Update to install the most recent version. After installing 10.6.8, open Software Update for a second time to update iTunes, so you will be able to use the iPod nano

Maybe you are looking for

  • Collaboration By WebEx-EP6SP2

    Hello, I am trying to incorporate the busines package "Collaboration By WebEx". Through the Iview "WebEx Meetings" (com.sapportals.pct.col.webexmeetings.default) when I try "Schedule Meeting" link, I get below error. Error in executing a process for

  • HT1386 i can no longer sync my photos to my phone...

    After the last update... i no onlger have the option of syncing photos.....WHY???

  • How to view and or delete smart folder in finder sidebar

    Sounds easy, but I am having a problem. I recently had my hard drive replaced at the genius bar. I have a smart File on the finder side bar that I can not open or delete. When I click on the file I get the message "the volume for (name of file) canno

  • Pretty gtk2 as root, ugly as non-root? [/SOLVED]

    Heh, this is actually a little bit interesting. I've never ran anything that requires X as root until just a few minutes ago and realized that running applications such as pidgin and firefox as root, they are significantly prettier than what it looks

  • Bluetooth 2.0 with A2DP profile support

    I have a set of parrot Hi-Fi speakers with built in bluetooth connectivity. They require Bluetooth 2.0 with A2DP profile support to pair. Does anyone if the new Macbooks with Leopard OS supports this ??