New Nehalem XServe doesn't have Quartz Extreme?
I have a new Nehalem with 2x 2.93GHz Quad-Core (16 cores total) with the standard NVIDIA GeForce GT 120 256MB Graphics card. For some reason Final Cut Server 1.1.1 and now 1.5 doesn't believe this server has Quartz Extreme and refuses to install. For that matter, Compressor also refuses to open for the same reason.
What I have to do is go to a previous generation Xserve, do the install on the hard drive, then move that hard drive back to the Nehalem. So other than Compressor not opening, the Xserve is behaving normally with Final Cut Server near as I can tell.
Any ideas what's up with this Xserve? I've reduced the display to as low as 800x600 with no change.
thanks.
You need to have a display connected for it to register that it is Quartz Extreme capabilities. Get a displayport to VGA or DVI adapator and hook up a monitor. With the previous intel boxes with the mini-dvi connector it was enough to just have the the dongle that came with the server plugged in at startup to get it to register Quartz Extreme. I am not sure if plugging in the display port adaptor with nothing else on the other end will work as all my installs and servers as of late have all had KVM switches. But the concept is still the same. The video card has to see something on the other end before it registers.
Similar Messages
-
How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated. -
How do I install a Acrobat 9 Pro on my new laptop that doesn't have a CD/DVD drive? I have the disk and serial #.
Download Acrobat products | 9, 8
Mylenium -
I'm trying to install an old version of Dreamweaver on a new computer that doesn't have a CD drive.
Hi. I've recently bought a new computer that doesn't have a CD drive. I am trying to install Dreamweaver CS4 on my new computer (and uninstall from they old one), but I only have the program on CD. Is it possible for me to download Dreamweaver CS4 and use the activation key I already have?
Copy the files from the CD to a USB drive and then utilize the USB drive to install the software.
-
How do I Install CS5 that is on a DVD/cd that I purchased years ago onto my new iMac that doesn't have a DVD drive? Hoping to avoid purchasing an extern DVD drive.
You can download the CS5 installer from Download and Installation Help
Install then enter your serial number. -
I’m going to get the I Mac and since the new I Mac doesn’t have DVD drive on it I was thinking to get the Samsung SE-506AB Slim Portable Blu-ray Writer in order to burn movies from I movie do I need a special software for that since the SE-506ab comes only with windows software.. but I did check and it is compatible with apple. Can you please advise me and or let me know if I’m buying the right stuff or if there is any other blu ray that will work with the I mac as plug and play.
Thank you
HaimThis freezing reminds me of really old Macs, long ago, in the days of the old-school peripherals like SCSI drives, terminators, scanners and the like. If you had a SCSI conflict, like the wrong device ID's or something, you'd freeze up like that. Back in those days you'd call 800-SOS-APPLE (AAPL?) and they'd run you through disconnecting all your extra hardware - Jaz and Zip drives, CD burners, scanners etc and then eliminate them one by one by adding them incrementally and testing for the freeze/bomb dialog.
But, today we have Firewire and none of those ancient issues (no free lifetime tech support either). My iMac's ports are all full, and I only know which devices are connected when I have to remove something for another device. iSight, scanner, card reader, external hard drive, USB soundsticks, etc. You wouldn't happen to have any SCSI devices hooked up, would you?
Out of curiosity, have you tried a different USB/Firewire port for the hard drive? Or run the hardware test DVD that comes with your computer? This weird freezing seems to suggest a problem with the computer, RAM or network more than a device. Bad devices, in my experience, cause kernel panics, not freezing. -
How do I install my CS 5.5 disk on my new imac that doesn't have a disk drive? Can I download it? I have my serial number. Please help!!
Usually means a corrupt download. Try re-downloading.
Alternative: Download Adobe CS5.5 Trials: Direct Links (no Assistant / Manager) | ProDesignTools -
How can I load eLearning Suite 2.5 on my new computer that doesn't have a disk drive?
How can I load eLearning Suite 2.5 that I purchased over a year ago on my new computer that doesn't have a disk drive?
if you follow all 7 steps (listed here, http://prodesigntools.com/adobe-cs6-direct-download-links.html) you can dl a trial here: http://prodesigntools.com/adobe-captivate-5-and-elearning-suite-2-now-shipping.html/commen t-page-1
and activate with your serial.
if you have a problem dl'g, you didn't follow all 7 steps. the most common error involves failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). -
My new iphone 5s doesn't have any volume when I call someone. I can see from the screen that it is calling them, but I cannot hear anything. Also when they answer my call, I cannot hear them.
Turn the volume up... in call volume and sounds (ring, notifications, etc) are seperate volume controls.
-
My new mac mini doesn't have upper dock?
My new mac mini doesn't have upper dock?
You appear to be confusing Macs and iOS devices. The Mac mini does not run on iOS 4, if new, it has Mac OS X 10.6.x Snow Leopard.
You should sort out the profile that you show so we know what devices you have with which proper OS and then be much more explicit about what the problem is. -
I have a Ipod mini 6gb that still works but a new computer that doesn't have its software. How can I download the software for it
Check the iPod Hardisk health with the iPod Disk Diagnostic, as posted by tt2
https://discussions.apple.com/message/17776595#17776595
It wont fix your problem, but may tell help troubleshoot, why it is freezing iTunes, especially when the Pending and Realloc numbers are high.
have a nice day! -
I upgraded to 06 because of the new features in iMoive and iPhoto. No where on the package did it state that Quartz Extreme was required. So after attempting a couple of times to apply a theme I looked into it and discovered the requirement.
Then I checked my system. I have 2 cards, 1 has QE and one does not. I read that even if you have one that does, the one that does not will keep themes from working. So I removed the one that did not...and...still no worky.
Here's what it says under Graphics/Displays in Profiler
<pre>
ATI Radeon 9000 Pro:
Chipset Model: ATY,RV250
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 64 MB
Vendor: ATI (0x1002)
Device ID: 0x4966
Revision ID: 0x0001
ROM Revision: 113-99702-130
Displays:
R911E:
Resolution: 1280 x 1024 @ 75 Hz
Depth: 32-bit Color
Core Image: Not Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display:
Status: No display connected
</pre>
Did you get that last line? "No display connected?" Then how they hey am I seeing what's on screen?
OK, I really don't care if it thinks one is connected or not, I just want this to work!
Dual 1.25GHz G4 Mac OS X (10.4.7) 1.5Gb RAM
Dual 1.25GHz G4 Mac OS X (10.4.7)KajuRob,
The ATI 9000 Pro can support two displays.
At the moment, it appears you only have a Rosewill 9111E display attached.
You graphics card does not support Core Image and I think that may be part of your problem with themes as they leverage that technology.
Matt -
How do I install Photoshop Elements 10 on my new mac that doesn't have a disc drive?
Help! I have an old imac that has Photoshop Elements 10 installed on it. I bought a new imac that does not have a disc drive. How do I uninstall/reinstall on my new computer??? Is there a way besides having to purchase a disc drive?
John
Thank you for working this through with me.
Okay, so I'm going to describe the step-by-step following of the instructions [which I thought I had done before ]. If you see where I'm making an error can you point it out to me.
1. I clicked on the link in your post of May 13 which took me to a page called "Direct Download Links for Adobe Photoshop/Premier Elements 10". I have basic Elements, not Premier and I need to get PSE 10 onto a Mac, which the site says I will only need a "single .dmg file for each program". Then I
2. logged in to the Adobe account ( required by instructions ) set up when I bought the disc version last August.
3. I turned "cookie control" to accept all; having a Mac I have no antivirus software nor any firewalls
4. I "clicked here to visit this page" in the instructions .........BUT ............ that took me to a PSE 11 download page, not 10
5. That dropped a .dmg called "AdobeDownloadAssistant.dmg" into my downloads box.
6. I opened the .dmg file, which took me to a window with an "Install Adobe Download Assistant" folder icon which
7. I opened. I was asked if I wanted to download it from the internet; I clicked "Open"
8. Another window opened; its message said "The same version of the application you opened already exists on this system. Would
you like to run the version already installed?".
A. Because I used the same Adobe i.d. when I tried the download on the Air as I used when I created the Adobe account on the
MacBookPro I wondered if Adobe thinks the PSE10 on my older MacBookPro is on the newer Air. I did check the Applications
listed in the Air's Finder and PSE 10 was not there although I had tried to install it earlier today before my first post on this matter
in this forum.
B. Given the above, I clicked on a "Run Now" option in the window mentioned in the first line of # 8 here and it
9. Took me to a Adobe Download Assistant window with a message "Make the most of your trial " referring apparently to 11
when what I want to put onto the Air is the 10 I bought last August. I did check the registration on Adobe's site of the purchase
of 10 last August and it showed everything correctly, including "mul" which I took to mean I could put it on multiple laptops.
Maybe !
10. I was aksed in that box to choose my level of familiarity with photo editing software and I chose the middle one.
11. I also noticed in the bottom third of that box a blue download bar which got "stuck" at about 2/3 done. The yellow triangle with
an exclamation point inside was followed by this message : "Error downloading this product (Error 109). Check you network
connection or destination disk. You can also uses the "Reset product download" button. My network connection was full bars
the whole time.
Given that there was an error message - that the download was not complete - that explains my surprise in # 8 above that
"the download already exists........". That can't be given the error message I quoted in # 11.
12. There is/was no "Reset download button" to be seen so I cllcked on an 'x' by it and it closed the stalled download bar.
And, after all this voluminous [sorry] activity that's where I'm stuck.
No PSE 10 on the Air
Can't d/l a trial of 11, even if I wanted to.
Extremely frustrating.
Adboe's website does not appear to offer any contact with an Adobe person to solve this other than paying $39, which does not seem right.
Bob -
How can I install Adobe PSE9 from my old computer to my new computer that doesn't have a disc drive?
Recently purchased a new PC with Windows 8 and doesn't have a disc drive. How do I install my Adobe PSE9 from my old computer to my new computer?
Thanks!You do not install it from the older machine to the newer one. You just install it on the newer one, and if you prefer to you can deactivate it on the older one, though you are not required to since you are allowed to have the software activated on two machines.
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
Photoshop/Premiere Elements 9:
http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml -
Hello.
I just purchased a new iMac. He's awesome. However, he didn't come with a Firewire port. (Bummer, because I have one from the last time (2007) I had to transfer stuff from my iBook...)
When I turned him on, he wanted to use Migration Assistant to transfer files from the older iMac; she doesn't have the most updated Migration Assistant, though. (She works just fine, but she only has Snow Leopard.)
Okay, so what I'm wondering is if I just have to use a huge external hardrive to move everything? If I do that, will my programs (Microsoft Office) move? I fear they won't move/transfer that way. Ugh.
PLEASE HELP.
Ideas? Advice?
Thank you in advance!Firewire 800 (what the new iMac has) is 9 pin. FireWire 400 is 6 pin (what your old iMac has). Hopefully you didn't damage your new iMac by trying to insert a FW400 cable into its FW800 connector. The numbers are important in the case of the ports. They don't interchange!!! Get the proper cable or risk damaging your new iMac.
Maybe you are looking for
-
Mid 2010 MacBook Pro GPU Panic
Right, I've had this issue for a while now but it's happening so regularly now that it's infuriating. My Mid 2010 15' MacBook Pro often suddenly turned off. The screen flashes white then it reboots. It's always when I'm doing things, but nothing taxi
-
I have an old Mac G5 with OSX 10.5.8 After a crash of my HD, I reinstalled the CS3. At the time of recording I get a window with the message "COMPLETED REGISTRATION" and under "There was a problem sending the informasioni via internet" and still unde
-
Trouble trying to factory reset from recovery (D:) drive
Hey, I'm in a bit of a predicament. The Vista cd key on the bottom of the laptop has, of course, worn away and is mostly unreadable at this point and it was never written down. Also, there were never any recovery DVDs burned and I am no longer able
-
IOS 5.1 no iCloud push to "music"
I upgraded my iPad, 1st gen, with iOS 5.1 and the latest version of iTunes. I laso updated my itumes on my iMac to 10.6 which is was to addresses an issue where songs may skip when playing from iCloud. Now on my iPad, when I open my "Music" there is
-
Cannot edit using DW in live view.
Normally I write exclusively using an IDE in plain code, but have to deal with some HTML email designing and it is easier to develop these in a GUI editor. This is a plain HTML document, no javascript, no attached CSS even. It's all structurally corr