New NIS Installation on a Veritas Cluster

I am getting the following error after running the following command:
#ypinit -m
Can't get local host's domain name. Please check your path.
Any ideas ?
Everything seems to look ok.

I emailed Hitachi suppport and got this response.
It works, just a pain
Hard drives of SATA type interface does not have jumpers to configure. You
can still use a SATA 3.0Gb/s drive (set to 3.0Gb/s) in your system, but it
will only work at 1.5Gb/s.
If your have a PC system, you can temporarily install the drive internally
and use our utility called Feature Tool that'll allow you to change various
ATA settings. This utility has the diskette and CD version. If you do not
have a floppy drive and are unable to create a Feature Tool diskette, you
can select the Feature Tool CD image. The fourth download link is for the
image file. This file will allow you to create a bootable CD version of
Feature Tool when a floppy diskette drive is unavailable. For instructions
on how to properly use this file, please refer to the documentation
included with your CD burning software.
If you have any questions regarding the usage of Feature Tool, please refer
to the User's Guide (see page 17 on how to change the drive capacity). The
Feature Tool and User's Guide can be downloaded from the following URL:
http://www.hitachigst.com/hdd/support/download.htm#FeatureTool
Before running Feature Tool, ensure that your system boot sequence (in your
system BIOS) is set to boot to your CD ROM drive as the first device.
Insert the bootable Feature Tool diskette or CD that you created and let
the system boot to this CD.

Similar Messages

Veritas Cluster 6 + Solaris 11 + Oracle RAC 11g2 = OCR trouble

I trying new version of Veritas Cluster and Solaris.
Experienced trouble with clustered VxFS for OCR file.
Grid installer refuse VxFS with message - not support the storage type.
After installation I tryed to add new OCR file on VxFS got message in crsd.log:
==============
+2013-01-14 11:05:38.898: [ OCROSD][26]utstoragetypecommon: Oracle Cluster Registry does not support the storage type configured. OCR can be configured on: ASM, NFS, Character Device, VxFS+
+2013-01-14 11:05:38.898: [ OCROSD][26]utdvch:-1: New location /app/oracle/ocrvote2/2.ocr configured is not valid storage type. Return code [37].+
+2013-01-14 11:05:38.898: [ OCRRAW][26]propriodvch: Error [8] returned device check for [app/oracle/ocrvote2/2.ocr]+
+2013-01-14 11:05:38.898: [ OCRRAW][26]dev_replace: master could not verify the new disk (8)+
File system mounted on both nodes with option mincache=direct.
What can be the reason for this error?

Trouble was solved by VCS patch 6.0.3
Version 6.0.1 does not support Solaris 11.1

Question about Grid Control Agents on a Veritas Cluster (or any cluster)

Hi, I'm seeking advice on how to setup Grid Control agents on a Veritas Cluster.
My cluster is made up of two Sun M4000 servers running Solaris 10 x64 (node1 and node2), and 8 virtual hosts setup to fail between the nodes. Each of these virtual hosts has several mount points from a SAN, and contain Oracle 9 and 10 homes as well as databases. The versions are 9.2.0.8 and 10.2.0.3.
I have a full grid control agent install on each node to mount points that don't fail over to the other nodes. These agents monitor the nodes themselves.
Now for my question, is it better to do full intalls of the grid agent in each virtual host or to use the "emctl deploy agent" from the full installs already on node1 and node2 to the virtual hosts? Or is there some other, better way to do this.
Either method results in 9 grid control agents on a node if all the virtual hosts are on that box. I've experimented with both agent deploys and installs a bit and found that the cpu usage goes though the roof with that many agents on one server. Maybe I don't have them configured correctly, but every now and then they spike cpu usage to 100%, and these servers have 8, dual core processors in them with 32GB of RAM.
Thanks for any tips!
Currently, my setup looks something like this, if it helps:
ORANODE1...........................................ORANODE2
user: oracle..........................................user: oracle
full agent install....................................full agent install
VirtualHost1
user: ora_user1
Oracle 10G Home
repository database
OMS install
full agent install
VirtualHost2
user: ora_user2
Oracle 9i Home
production database
full agent install
VirtualHost3
user: ora_user3
Oracle 9i Home
production database
full agent install
VirtualHost4
user: ora_user4
Oracle10g Home
production database
full agent install
VirtualHost5
user: ora_user5
Oracle10g Home
production database
full agent install
VirtualHost6
user ora_user6
Oracle10G Home
production database
full agent install
VirtualHost7
user: ora_user7
Oracle10G Home
production database
full agent install
VirtualHost8
User: ora_user8
Oracle10G Home
production database
full agent install

Will the agent 10.2.0.3 work with Grid Control 10.2.0.1
Yes.

JES & Veritas Cluster Server

Hi All,
By this message i want to share with you my experience with Veritas and JES.
Last week, i configured the Veritas Cluster Server Agent for iPlanet 5.2 to work with JES 6.1. There was problem to bring the ressource group of JES online because the agent is't conpatible with the JES 6, but done somes modification to allow the agent to monitor my JES ressource group.
Firstly :
When bringing the JES ressource group onlin, the VCS Agent search for a file named /etc/msgregistry.inf, this file deasn't exist in JES 6 only in 5.2. to avoid this problem i created an empty file in both nodes using touch :
touch /etc/msgregistry.inf
Secondly :
The old binaries directory sbin on the messaging server was located on the msg-bin and in the new version JES 6 it's located in sbin and to avoid this problem i created a symbolic link like :
ln �s serverroot/sbin serverroot/msg-sbin
Where the serverroot is the full path name to the messaging directory configured on the Veritas Cluster.
I finded this issues only by debugging the Agent scripts, probably you will be faced to other problem, i advice you to just look at the veritas log and try to circumvent the problem.
Enjoy my help.
Mourad.

I don't feel like you've read my response.
It appears you're using the 5.2 cluster agent. You need the new JES cluster agent. It's on the JES CD.
There is no longer an "inf" registry file for it to look at. There is documentation for installing cluster. Please examine and follow.
http://docs.sun.com/app/docs/doc/819-2650/6n4u4dtn1?a=view

Veritas Cluster (SFRAC) and oracle CRS

We have oracle 9i RAC running on Solaris 9 with over veritas cluster.
We want to run 10g RAC on the same same servers which will use the
veritas cluster file system
While trying to install 10g CRS the node selection list doesnt show node
information.Entered information using response file .After the installation
root.sh fails to start CRS.
Is it ok to run 9i and 10g RAC on same servers.

Chandra/Vishwa
We have a libskgxn2.so in /opt/ORCLcluster/lib directory. But the size of the file is
different from /opt/VRTSvcs/rac/lib/libskgxn2_64.so.1 file
Since we already have 9i rac running, I am not sure if copying the file from
/opt/VRTSvcs/rac/lib directory if it will affect 9i rac.
I went ahead with installation of CRS. I am getting following error while running root.sh
Checking to see if Oracle CRS stack is already configured
Checking to see if any 9i GSD is up
/oracle/crshome/AUTEST/bin/lsdb: Failed to initialize Cluster Context
skgxn error number 1311719766
operation skgxnqtsz
location SKGXN not av
errno 0: Error 0
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
clscfg -install -nn nodeA,nodeAnum,nodeB,nodeBnum... -o crshome
-l languageid -c clustername -q votedisk
[-t p1,p2,p3,p4] [-pn privA,privAnum,privB,privBnum...]
[-hn hostA,hostAnum,hostB,hostBnum...]
With CRS and veritas running on the same server , will CRS always communicate
across nodes using VCS since we will be using veritas cluster file system
for database.
Shankar

How do I move my iPhone to a new iTunes installation?

Hi folks,
I have a new Windows 7 computer and want to sync my iPhone with it, but iTunes says it's going to delete all of my data. My old computer that I used to sync with is gone; the drive has been reformatted.
I don't care about the music on the phone; I have all of that on my server. However, I'm worried sick about my apps and the data stored within them!! I have years worth of life data, journals, etc, in apps on this phone. How do I tell iTunes, "This is my new computer now; back up and sync here from now on?"
Here's what I've done so far:
1. I authorized the new iTunes installation with my iTunes account.
2. I right-clicked on the phone within iTunes and selected "Transfer Purchases." It appeared to work, said it was copying all of my apps. But when I go to the Apps tab and click "Sync Apps", it tells me it's going to replace all of the apps on my phone with the apps in iTunes. However, I only see two (out of dozens) of my apps there! Did "Transfer Purchases" not do what I expected it to? How can I fix this?
Thank you!

It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
Use your backup copy to put everything back.
The iphone will sync pics and itunes content with one and only one computer at a time. If you sync to another, it will indeed erase the current content and replace with content from the new computer.
Also if you sync contacts/calendars to a blank computer, they will be erased as well. Another reason a backup is critical.
If you have failed to maintain a backup ( not good)then, transfer purchases will transfer itunes purchases. Make sure you have authorized the computer for your itunes account(s).
About iTunes Store authorization and deauthorization
Backup your iphone:
Backing up, updating, and restoring iPad, iPod touch, and iPhone software
Enter one unique contact and calendar entry on the new computer. When you first sync you should get the option to merge the data.
Than make a backup copy of your computer and always maintain it.

New Server Installation, now client computers can't connect to services. Where to go from here?

Hello.
I recently had to setup a new Mac Mini Server (Mavericks). We had one previously but one of the raided hard drives failed. No backup.
Our office of 6 Apple MacBook Pros used to connect to all file sharing and calendar services, easily.
On the new Server installation, I added the same users with the same passwords etc. The client computers cannot access calendars, file sharing etc. On the clients, I have opened up System Preferences > Users & Groups > Login Options > Network Account Server and added the FQDN of the server, but I get an error ' Unable to add server. Connection failed to the directory server. (2100) '
2 of the clients are on Mountain Lion. The rest are on the latest Mavericks.
I'm a bit lost on where to go from here and would appreciate your help before I wipe everything and start from scratch.
Thanks.

Hi Strontium90
Ha! There was a time machine backup, but we had a storm here which rendered it and the server useless. We are such a small team without an 'IT' guy, apart form me as I have a vague interest in all things Apple.
What is your DNS name space?
Do you need the name here?
Do the servers and the client agree on this name?
Not sure what you mean. The domain name works as when I type it into a web browser, I can see the 'Welcome to Server' page.
Did you enable an Open Directory Master?
Yes. Open Directory is running.
Did you grant the users/group access to the service you are offering?
Yes. All services are checked for each user.
Make sure the user/group is permitted to access your enabled services.
All allowed, too.
Oh, and implement a backup strategy
Will do, once I sort out this problem. Time Machine and off-site, I think.

During the installation of grid infra(cluster) for Oracle 11.2 RAC one.

Good Day All, and thanks in advance…
During the installation of grid infrastructure(cluster) for Oracle 11.2 RAC One Node on AIX6.1 ( PROD) , ASM used. I am getting below errors when executing ./root.sh
Upon investigation ,I managed to get note: 1068212.1 from the support oracle site ( see below for details) . I might be hitting Unpublished bug 8670579. I also logged Severity 2 SR with Oracle support to get the bug/patch fix and no one has attended the call.
This might be configuration issue or otherwise , if you have experienced the same issue please assist ? ( if you need more logfiles please feel free to request)….
I ran the Cluster Verify Check – all passed.
Many Thanks
Ezekiel Filane
/u01/app/11.2.0/grid#./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /u01/app/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2010-10-19 10:33:11: Parsing the host name
2010-10-19 10:33:11: Checking for super user privileges
2010-10-19 10:33:11: User has super user privileges
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
User grid has the required capabilities to run CSSD in realtime mode
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'system'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on 'csgipm'
CRS-2672: Attempting to start 'ora.mdnsd' on 'csgipm'
CRS-2676: Start of 'ora.gipcd' on 'csgipm' succeeded
CRS-2676: Start of 'ora.mdnsd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'csgipm'
CRS-2676: Start of 'ora.gpnpd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'csgipm'
CRS-2676: Start of 'ora.cssdmonitor' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'csgipm'
CRS-2672: Attempting to start 'ora.diskmon' on 'csgipm'
CRS-2676: Start of 'ora.diskmon' on 'csgipm' succeeded
CRS-2676: Start of 'ora.cssd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'csgipm'
Start action for daemon aborted
CRS-2674: Start of 'ora.ctssd' on 'csgipm' failed
CRS-2679: Attempting to clean 'ora.ctssd' on 'csgipm'
CRS-2681: Clean of 'ora.ctssd' on 'csgipm' succeeded
CRS-4000: Command Start failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl start resource ora.ctssd -init
Start of resource "ora.ctssd -init" failed
Clusterware exclusive mode start of resource ora.ctssd failed
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
CRS-2500: Cannot stop resource 'ora.asm' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.asm -init
Stop of resource "ora.asm -init" failed
Failed to stop ASM
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'csgipm'
CRS-2677: Stop of 'ora.cssdmonitor' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'csgipm'
CRS-2677: Stop of 'ora.cssd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'csgipm'
CRS-2677: Stop of 'ora.gpnpd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'csgipm'
CRS-2677: Stop of 'ora.gipcd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'csgipm'
CRS-2677: Stop of 'ora.mdnsd' on 'csgipm' succeeded
Initial cluster configuration failed. See /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_csgipm.log for details
csgipm:/u01/app/11.2.0/grid#ps -ef | grep pmon
root 6160492 3932160 0 10:54:13 pts/2 0:00 grep pmon
more /u01/app/11.2.0/grid/log/csgipm/client/ocrconfig_5767204.log
csgipm:/usr/sbin#more /u01/app/11.2.0/grid/log/csgipm/client/ocrconfig_5767204.log
2010-10-19 10:33:14.435: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.435: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.435: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.435: [ OCRRAW][1]proprioini: all disks are not OCR/OLR formatted
2010-10-19 10:33:14.435: [ OCRRAW][1]proprinit: Could not open raw device
2010-10-19 10:33:14.442: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2010-10-19 10:33:14.461: [ OCRCONF][1]Exporting OCR data to [OCRUPGRADEFILE]
2010-10-19 10:33:14.461: [ OCRAPI][1]a_init:7!: Backend init unsuccessful : [33]
2010-10-19 10:33:14.461: [ OCRCONF][1]There was no previous version of OCR. error:[PROCL-33: Oracle Local Registry is not configured]
2010-10-19 10:33:14.461: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.461: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.462: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.462: [ OCRRAW][1]proprioini: all disks are not OCR/OLR formatted
2010-10-19 10:33:14.462: [ OCRRAW][1]proprinit: Could not open raw device
2010-10-19 10:33:14.462: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.463: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.483: [ OCRRAW][1]ibctx: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.483: [ OCRRAW][1]proprinit:problem reading the bootblock or superbloc 22
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.484: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.541: [ OCRAPI][1]a_init:6a: Backend init successful
2010-10-19 10:33:14.646: [ OCRCONF][1]Initialized DATABASE keys
2010-10-19 10:33:14.650: [ OCRCONF][1]Exiting [status=success]...

Hi,
We are also trying to install 11.2.0.2 Grid infrastructure for Oracle RAC One Node on AIX 6.1. We did a POC in our lab environment and after much struggle got that working. Now we are building 4 clusters in the production environment and the first cluster installation failed while running root.sh on node2. We already have a Sev1 ticket open with Oracle Support but have not heard anything.
Here is root.sh output from node2. The two node names are p01dou416 and p01dou417.
CRS-4402: The CSS daemon was started in exclusive mode but found an active CSS daemon on node p01dou416, number 1, and is terminating
An active cluster was found during exclusive startup, restarting to join the cluster
Failed to start Oracle Clusterware stack
Failed to start Cluster Synchorinisation Service in clustered mode at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 1020.
/u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
[root@P01DOU417] /u01/app/11.2.0/grid #
LOG output: /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/ rootcrs_p01dou417.log
2010-11-13 17:22:14: Successfully started requested Oracle stack daemons
2010-11-13 17:22:14: Starting CSS in clustered mode
2010-11-13 17:22:14: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl start resource ora.cssd -init
2010-11-13 17:32:28: Command output:
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'p01dou417'
CRS-2672: Attempting to start 'ora.gipcd' on 'p01dou417'
CRS-2676: Start of 'ora.cssdmonitor' on 'p01dou417' succeeded
CRS-2676: Start of 'ora.gipcd' on 'p01dou417' succeeded> CRS-2679: Attempting to clean 'ora.cssd' on 'p01dou417'
CRS-2681: Clean of 'ora.cssd' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.diskmon' on 'p01dou417'
CRS-2677: Stop of 'ora.diskmon' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'p01dou417'
CRS-2677: Stop of 'ora.gipcd' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'p01dou417'
CRS-2677: Stop of 'ora.cssdmonitor' on 'p01dou417' succeeded
CRS-5804: Communication error with agent process
CRS-4000: Command Start failed, or completed with errors.
End Command output2010-11-13 17:32:28: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl check css
2010-11-13 17:32:28: Command output:
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
End Command output2010-11-13 17:32:28: Checking the status of css
2010-11-13 17:32:33: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl check css
2010-11-13 17:32:33: Command output:
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
End Command output2010-11-13 17:32:33: Checking the status of css
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.cssdmonitor' on 'p01dou417'
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.gipcd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2676: Start of 'ora.cssdmonitor' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2676: Start of 'ora.gipcd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.cssd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.diskmon' on 'p01dou417'
2010-11-13 17:32:38: CRS-2676: Start of 'ora.diskmon' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2674: Start of 'ora.cssd' on 'p01dou417' failed
2010-11-13 17:32:38: CRS-2679: Attempting to clean 'ora.cssd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2681: Clean of 'ora.cssd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.diskmon' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.diskmon' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.gipcd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.gipcd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.cssdmonitor' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-5804: Communication error with agent process
2010-11-13 17:32:38: CRS-4000: Command Start failed, or completed with errors.
2010-11-13 17:32:38: Failed to start Oracle Clusterware stack
2010-11-13 17:32:38: ###### Begin DIE Stack Trace ######
2010-11-13 17:32:38: Package File Line Calling
2010-11-13 17:32:38: --------------- -------------------- ---- ----------
2010-11-13 17:32:38: 1: main rootcrs.pl 324 crsconfig_lib::dietrap
2010-11-13 17:32:38: 2: crsconfig_lib crsconfig_lib.pm 1020 main::__ANON__
2010-11-13 17:32:38: 3: crsconfig_lib crsconfig_lib.pm 997 crsconfig_lib::start_cluster
2010-11-13 17:32:38: 4: main rootcrs.pl 697 crsconfig_lib::perform_start_cluster
2010-11-13 17:32:38: ####### End DIE Stack Trace #######
2010-11-13 17:32:38: 'ROOTCRS_STACK' checkpoint has failed
Any help on this is appreciated.
Edited by: user12019257 on Nov 17, 2010 1:26 PM

How to install & confgiure Oracle9i on Veritas Cluster Server

Hi,
I want to know how to install oracle9i on Veritas Cluster Server having OS as Solaris 9. Also How to configure oracle in VCS so that it can be failover.
I really appreciate the replies.
Thanks,
Shrikant

I want to install following component
Oracle 9i form server & report server
Oracle HTTP Server in SSL mode
Oracle As Web Cache
Regards
Arvind

Sync iPhone 4 with new Mac installation

I've just replaced the hard drive in my MacBook Pro with a fresh new OS 10.6.8 installation. The old drive is still accessible via a USB external case.
I did not use Migration Assistant, as I didn't want to inherit any mess from the old system, and MA's options seem extremely unrefined - most checkboxes are very non-explicit about what it will migrate.
I have transferred all music, book and app files to the new iTunes from the old. My new iTunes is logged into the same iTunes account as the old.
I've manually set up Apple Mail, but my Address Book is currently waiting for contacts, and iCal is also empty, which I presumed I could sync directly from my iPhone.
But I would like to re-sync my iPhone 4 with the new iTunes WITHOUT erasing the phone. I have many hours worth of user configuration data within my many apps - favourites in GPS apps, saved game settings, documents in reader apps etc.
From everything I've read, this seems impossible! The new iTunes installation insists on erasing the phone. SURELY this can't be true. How do I store my phone in it's current form and retain all current data and settings?
Any assistance greatly appreciated.

1. Disable auto sync when an iPod/iPhone is connected under iTunes>Preferences>Devices in itunes.
2. Make sure you have one contact & one event in the supported applications(Address Book & iCal) on your computer. These entries can be fake, doesn't matter, the important point is that these programs not be empty.
3. Connect your phone, iTunes running, DO NOT SYNC at this point.
4. Store>Authorize this computer.
5. File>Transfer Purchases(To make sure all purchased content on your phone will be in your itunes library).
6. Right click in the device pane & select reset warnings.
7. Right click again and select backup.
8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
9. This MUST be followed by a sync to restore your itunes content, which you select from the various tabs, You'll get a popup regarding your contacts & calendars asking to merge or replace, select merge.
You should be good to go.

Transfer Songs from Ipod to New Computer and New Itunes Installation

Hi,
I want to transfer songs on my Ipod to a new installation of Itunes on a new computer. I get a message that my Ipod is synced to another library and that I can only be synced to one library and that my ipod will be erased and synced to the currently libary. The problem is my current library is empty since it's a new itunes installtion and I don't want to erase my ipod and delete all my songs.
So how do I transfer songs from my ipod to the new itunes installation on my new computer?
Thanks for any replies.

I think I've read in a post before that you can't do it that way. That you can only transfer music from the computer to the iPod, and not the other way around. I believe they suggested backing up your library (to disk, I guess) and installing it on the new computer. Something like that. It seems silly that the transfer only works one way, but there you are.

Standby Database in Veritas Cluster

Can anyone point me to documentation on the standard/recommended
procedure/configuration to maintain a redundant standby Oracle
database in a Veritas cluster?
Thanks.
Ajay Rajani

We are in the process of establishing the same but still working on how the file systems will have to be arranged for failover

Performing "offline" compliance module update to new ISE installation

Hi everybody,
I am just wondering if anyone knows how perform compliance module on a new ISE installation to get the AV and AS updates, while the ISE is "offline", (not connected to Cisco/Internet).
The ISE has Advance Service license, but the customer's security poilcy prohibits connecting any device on their IntraNet to the internet, and if there is any updates to get from the Internet, then it has to be received on the internet network and manually transport it to the IntraNet.
Appreciate your input.
Mike

To upload offline posture updates, complete the following steps:
Step 1 Go to https://www.cisco.com/web/secure/pmbu/posture-offline.html .
Save the posture-offline.zip file to your local system. This file is used to update the operating system information, checks, rules, and antivirus and antispyware support charts for Windows and Macintosh operating systems.
Step 2 Access the Cisco ISE administrator user interface and choose Administration > System > Settings > Posture .
Step 3 Click the arrow to view the settings for posture.
Step 4 Choose Updates . The Posture Updates page appears.
Step 5 From the Posture Updates page, choose the Offline option.
Step 6 From the File to update field, click Browse to locate the single archive file (posture-offline.zip) from the local folder on your system.
Note The File to update field is a required field. You can only select a single archive file (.zip) that contains the appropriate files. Archive files other than .zip (like .tar, and .gz) are not allowed.
Step 7 Click the Update Now button.
Once updated, the Posture Updates page displays the current Cisco updates version information under Update Information.

Oracle 9i installation on Windows 2003 Cluster

Hi
I Need any good documentation for Oracle 9i installation on Windows 2003 Cluster.

Complete Guide is here
http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b14207/toc.htm

HT5655 The new Flash installer from Adobe still isn't working, right?

The new Flash installer from Adobe still isn't working, right? We get the "installation failed" messages, and we're awaiting Adobe's follow-up on it?

AdmrlLocke wrote:
Adobe Acrobat 8 has two problems on my iMac. The lesser problem comes when I go into the Print command and click "Preview." I get a message that says that Preview isn't supported.
Preview is not supported because building a preview of a print job under OS X involves creating a .PDF file. You already have a .PDF file open if you're using Acrobat, so there's no point creating a new one.
The greater problem just cropped up as I was writing about my problems with Quicktime and Real Player: Acrobat tried to update itself and then gave me a message that says, "Cannot overwrite file /Users/(myname)/Documents/Update5/AdobeUpdater/acrobat8pro-en_US/AUMProduct.dmg .
That's not a problem with Acrobat. The system is saying that you have a file named AUMProduct.dmg in place already, and you don't have permission to update it. You need to change the permissions on that file so that you can update it, or to use an account which has update permission. Or it might just be locked and you need to unlock it. Locate it using the Finder (you have the complete path to the file listed above) and see what permissions are on the file and whether or not it is locked.
You might also just put the entire Update5 folder into the Trash and try updating again.
The file maybe be locked or you may not have sufficient access rights. Please make sure you have write access to this file." Can anyone help? Thanks.

New NIS Installation on a Veritas Cluster

Similar Messages

Maybe you are looking for