New notes getting create on every new folders
Hello,
I have office 2010 professional installed on my work computer. When I create new folder Microsoft one Notes creates its new file 'Open Notebook' by itself.
I want to stop it and delete all other files.
Please help me.
Thanks
Sandip
Hi Sandip,
Do you mean the Open Notebook.onetoc2 file in each notebook folder?
The Open Notebook.onetoc2 file will always be created with one notebook. It's not recommended to delete the file.
The Open Notebook.onetoc2 file is a Microsoft OneNote index file that stores information about the order of note-taking sections. It is used to organize a collection of notes in a notebook. If the onetoc2 file is deleted, OneNote will
display the notebook sections in alphabetical order, which the user can manually reorder.
When you open a notebook folder, you will see the Open Notebook.onetoc2
file and several .one files. The .one files are the sections in the notebook. You can try to double click a .one file and you'll notice that the whole notebook is opened. However, if you there is no
Open Notebook.onetoc2 file found in the folder, when you click a .one file, it will only open the specific notebook Section.
I hope I had explained it clearly.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Similar Messages
-
New Session getting created(!)
Hi All,
I am facing a wierd behavior. I have an application with a
login page(jsp). User submits his authentication details,
is authenticated in a servlet, and some of his information is
put in the session. Later he gets "redirected" to another
jsp(just like any other app).
This is working fine most of the times. But randomly it is
so happening that the jsp being redirected to does not get the
values put in the session.
Some more debugging showed that from login jsp to servlet, same
session continued till the very last step(just before
redirection). Just after
response.sendRedirect(response.encodeRedirectURL(url));
a new session gets created(!!). Any pointers?
Please note I am testing all this out in a browser which is
accepting cookies.
Urgent!!
We have the same problem on WLS5.1.
Any suggestions would be fine
Regards
Osman
"Bijay Kumar" <[email protected]> schrieb im Newsbeitrag
news:3d0ed20f$[email protected]..
>
> Hi All,
> I am facing a wierd behavior. I have an application with a
> login page(jsp). User submits his authentication details,
> is authenticated in a servlet, and some of his information is
> put in the session. Later he gets "redirected" to another
> jsp(just like any other app).
>
> This is working fine most of the times. But randomly it is
> so happening that the jsp being redirected to does not get the
> values put in the session.
>
> Some more debugging showed that from login jsp to servlet, same
> session continued till the very last step(just before
> redirection). Just after
> response.sendRedirect(response.encodeRedirectURL(url));
> a new session gets created(!!). Any pointers?
>
> Please note I am testing all this out in a browser which is
> accepting cookies.
>
-
I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?
I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck! -
Listening for new cachings getting created?
I'd like to be able to register my own MBeans on each distributed CacheServer for each cache that lives on that server. Is it possible to register a listener anywhere that gets called when a new cache gets created? Alternatively, is it possible to register a listener that is called after the cache factory has finished starting all the "autostart" caches?
I'm using version 3.3
thanks
sam
ps - I'm already registering my own custom global mbeans... but they are created before any of the caches get created.Sam
You can specify your custom CacheFactory class in the override file so you can still use DefaultCacheServer
When I needed to intercept cache creation I extended DefaultConfigurableCacheFactory and overrode this method:
public NamedCache configureCache(CacheInfo cacheInfo, XmlElement xmlScheme, ClassLoader classLoader)
Then just call the super class version before or after doing whatever you need to.
The XML for the override file looks like this
<coherence>
<configurable-cache-factory-config>
<class-name>com.oracle.coherence.common.configuration.AdvancedConfigurableCacheFactory</class-name>
<init-params>
<init-param>
<param-type>java.lang.String</param-type>
<param-value system-property="tangosol.coherence.cacheconfig">coherence-cache-config.xml</param-value>
</init-param>
</init-params>
</configurable-cache-factory-config>
</coherence>The above snippet is taken from the Incubator common library. You would replace com.oracle.coherence.common.configuration.AdvancedConfigurableCacheFactory with the name of your class.
You need to call the override file tangosol-coherence-override.xml and put it on the class path or if you call it anything else then specify the name as a JVM argument with -Dtangosol.coherence.override=<name of your file>
Jonathan -
I have the latest firefox app on my laptop. When I click a link attachment to see a dinner menu for example, new tabs get created one after the other and so on. It's like a feedback loop, just more tabs and tabs but then you have to close the firefox window multiple time to get it to stop. I went to other websites and clicked their attachments and the problem repeated.
I have the current version of adobe also. please help. I'm using my internet msn exlplore now so can I send you this message. please help!
Thanks,
WayneYou get tabs opening endlessly if you select the Firefox program to handle a file when you get an "Open with" dialog.
*https://support.mozilla.org/kb/Firefox+keeps+opening+many+tabs+or+windows
You will have to revert this setting.
Rename (or delete) the mimeTypes.rdf file in the Firefox profile folder to reset all file actions.
*http://kb.mozillazine.org/mimeTypes.rdf
*http://kb.mozillazine.org/File_types_and_download_actions#Resetting_download_actions -
Required attribute not getting created
Ok, here is a wierd one.
I have some custom ID management code (an SSO plug-in cert mapper and a WAR file I deploy to OC4J_SECURITY). The application provides a registration process that creates user entries and RADs for Oracle Forms app users. Everything works fine, except that I have found that my RAD creation does not get the orclresourceviewers attribute created automatically.
This has worked in my IM development farm. The attribute would be created automatically. It was difficult to figure out this was the reason my Forms App Server would fail with the following exception.
oracle.ldap.util.AccessDeniedException: General Error when performing search: getExtendedProperties [LDAP: error code 50 - Insufficient Access Rights]
I have gone through the motions of now preparing to query the OID Forms ID so that I can fill in this attribute in my RAD creation class. I still would like to know why this attribute is not getting created for me anymore.
Any ideas?
Oh and BTW, it did not help that orclresourceviewers is not documented anywhere I could find (not OID Admin and not Forms Deployment Guide)
regards,
ttHi Sandeep.
Yes, my application entities that I set up to manage a specific realm are used to create all RADs in a particular realm. As part of the setup for this I add these application entitites to the following three realms:
cn=OracleDASAdminGroup,cn=Groups,cn=OracleContext,dc=<realm_name>,dc=<abc>,dc=<com>
cn=RealmAdministrators,cn=Groups,cn=OracleContext,dc=<realm_name>,dc=<abc>,dc=<com>
cn=UserProxyPrivilege,cn=Groups,cn=OracleContext,dc=<realm_name>,dc=<abc>,dc=<com>
I add to these so that the app entity could create, modify, delete and proxy to any realm user. I had to create an ACI to allow my entities to search and see the Forms Server application entity entry in order to populate orclresourceviewers.
I just wish I new why orclresourceviewers does not get created automatically. Of course, if I create the RAD in DAS or using the Oracle DynamicResourceCreate option, it is added. It has added it in my own RAD creation code at one point and it stopped for some reason.
I had to add an LDAP search to my RAD creation code with the possibility of multiple Forms Server entries (Logical Application Group) just in case. Much ado for something that maybe should not have been necessary.
regards,
tt -
ChaRM transport not getting created
Hi Experts,
I am in SP20 EHP1. I am configuring ChRm flow. I have made the copy of SDHF to ZSHF. I have completed all the configurations. I have made the copy of all the actions & statuses.
I am having two actions in ZSHF while creating the transport requests as below.
Option 1: Click the standard action "Set in Development". (copy of standard action). At that time the transport is getting created successfully.
Option 2: Click the action "Create New Transport request" (Copy of standard action). At that time the transport is NOT getting created. Why i couldn't able create the transport using this copied action? In the transaction data tab ---> Actions tab, the details says that action "Processing HF_EXECUTE_ACTION Is Started" & @5C\QError@ Action could not be successfully executed
Note:
But if i use the standard transaction type SDHF, at that time using both standard actions, i could able to create transports.
Need your valuable inputHi,
Please check for the configurational table for which you are facing problem, its delivery class should be "C" under delivery & maintenance.
You can get it checked by your ABAP team.
hope this will help.
Regards,
AK -
Hi All,
i am debuggin a code which is creating SUB ORDER (iw36) through call transaction method.
The transaction is filling the superior oder ,but after OK CODE it doesnt navigate to the next screen, instead it shows a message log, without any messages.
In the debugging mode I could notice that it fails at the point where FM CO_ZF_ORDER_LOCK_MULTI is called in SAPLCOIH. The parameter 'NOT_LOCKED' is having 2 records, as a result of which the FM CM_F_ANALYSIS is getting called which displays the log.
Please guide me in understading why the sub order is not getting created.
Thanks,
Vasuki
Edited by: Vasuki S Patki on Jul 14, 2009 3:03 PMHi Gajesh,
1) The Work center does not exist , I checked it in IR02..
2) I created the sub order manually , but it works fine. There is no error when creating manually.. But whne it is called from the program it takes a wrong entry for Workcenter that does not exist. But when I change it to the existing Workcenter it proceeds further.
3) I want to know where in the program the KTEXT is being populated, as it is taking an entry that does not exist in the superior order, it is a new entry.
Thanks,
Vasuki -
War not getting created jdeveoper 10 g latest release
hi,
I had created a new deployment profile for my application names testwar , but the war is not getting created in the folder deploy nor there is any folder named deploy in my application workspace directory.
Can anyone help me or give me a link which will help me create a war file , is it necessary to select the platform also on the option provided while make theHi,
create the deployment profile and use the context menu to create the war file. That is how it works.
Frank -
Excise invoice should not get created without PGI
Hi,
I have a scenario where the billing document is being generated by the customer without PGI after creation of outbound delivery for exports. (This is as per customer's requirement - Copy control maintained in VTFL for the same - copying requirements 11 )
This creates a situation - excise invoice can be created without PGI - which creates problems for customer. This should not happen.
Customer wants a check during the excise invoice creation - excise invoice should not get created if PGI has not been done.
Kindly advise as to how this can be done.
Regards,
T SaravananDear Saravanan
Two options are there
- in your existing routine itself, you can specify the control in such a way that unless the preceding document is PGId
- apply excise user exits like J_1I7_USEREXIT_EXCISE_BEF_SAVE to achieve the requirement.
thanks
G. Lakshmipathi -
Invoice is not getting created in Order related billing
Dear all,
I am trying to do a Order related billing. After creating the order i am going to VF01 and selecting the billing type i have created and trying to create the invoice. I am getting the error "No billing documents were generated. See log" when i am checking the Log its showing now errors.
In case if my account determination procedure is wrong, system should allow me to create a Sales invoice and accounting document will not be generated. But in this case even the sales invoice is also not getting created.
Please suggest me if there are any configuration changes i need to do to overcome this problem.Apart from the suggestion already given, also ensure that
the order is not showing in incomplete log
the order is not blocked for credit limit
You can also cross check in VF04 whether system is fetching that sale order. For information, once you execute VF04, by default, system will check only "Delivery related" check box. You have to manually select "Order related" check box.
G. Lakshmipathi -
File not getting created in a different server
My requirement.
I have written a code in the BI system and now need to write an empty file (say a.done)in a directory /interfaces of PI system.
I wrote using open data set and close data set however the file (a.done) is not getting created in the PI system even though the directory /interfaces exist.
When I give any directory of that of BI system ,the file(a.done) is getting created i.e the file is getting created on the same server and not on the different server.
Is there any function module or any other way for the file to get generated in the PI system.
Please explain with an example.
Regards,
VishTry to use search FTP in se37 or checkout the below FM
CALL FUNCTION 'EPS_FTP_MPUT'
EXPORTING
RFC_DESTINATION =
* FILE_MASK = ' '
* LOCAL_DIRECTORY = ' '
* REMOTE_DIRECTORY = ' '
* OVERWRITE_MODE = ' '
* TEXT_MODE = ' '
* TRANSMISSION_MONITOR = 'X'
* RECORDS_PER_TRANSFER = 10
* MONITOR_TITLE =
* MONITOR_TEXT1 =
* MONITOR_TEXT2 =
* PROGRESS_TEXT =
* IMPORTING
* LOCAL_DIRECTORY =
* REMOTE_DIRECTORY =
* LOCAL_SYSTEM_INFO =
* REMOTE_SYSTEM_INFO =
* TABLES
* FILE_LIST =
* EXCEPTIONS
* CONNECTION_FAILED = 1
* INVALID_VERSION = 2
* INVALID_ARGUMENTS = 3
* GET_DIR_LIST_FAILED = 4
* FILE_TRANSFER_FAILED = 5
* STOPPED_BY_USER = 6
* OTHERS = 7
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF. -
Weblogic Domain not getting created in SOA Suite 11g R2
I have installed the components of SOA Suite 11g R2 (11.1.1.3) on a single Windows XP SP3 machine (32 bit) following recommended procedures. I tried to configure Weblogic server using Domain Configuration utility. After navigating hrough the wizard, no Weblogic server profile is getting created in the doamin folder. Even the WL Admin server is not getting created. The Domain Configuration utility did not throw any errors.
1) Is this problem related to Oracle repository for SOA suite 11g?
2) Can the repository schemas (Oracle) hold multiple weblogic SOA domain information?Hi,
Weblogic servers directory do not gets created after domain creation or even managed server configuration. It will present itself only when you start the managed server for the first time, that is when it initializes all security attributes, diagnostic attributes (if configured) , etc..
Perform server start and then check if it gets created or not.
## rank answer if it is helpful ##
Thanks,
Ranjan -
BP not getting created while creating employee
Hi,
When I Hire an employee a BP should be created for it. It used to happen earlier in the system but after we moved to another system this is not working. Can someone please let me know the necessary config for this?
I've the following settings:
HRALX ONUMB = 2
HRALX OSUBG = MD
The MD number range is from 90000000 to 9999999999. Should this number range be internal or external?
When I use the HR_SYNC_PERSON report for an employee I get the error as
"Determination of connections to object 'BP' of 'CP' '50000201' failed"
"Object of type 'US' with ID '1122' does not exist or is inconsistent"
"Determination of connections to object 'BP' of 'O' '50000101' failed" etc
Also I need to upload the employee master data using LSMW and BP does not get created with LSMW also? Is there some specific config while using LSMW?
Please help.Whenever you are uploading employees using LSMW, you need to run program HR_SYNC_PERSON.
Pls refer to the following thread for further info:
Assignment: Business partner for person '50000029' is not unique
Regards,
Dilek -
AUC Asset not getting created when Internal Order is created
Dear Experts,
While Creating the internal order ( Object Class - Investment Measure)
AuC (Asset Under Construction) not getting created automaticall . Note Investment profile is already there in the order.
Following steps below are configured -
1. Define the AuC Asset Class (with investment measure) - OAOA
2. Define the Asset Class u2013 for Main Asset - OAOA
3. Define Investment Profile - OITA
a. Assign the AuC Asset Class (Step-1) in the investment profile
4. Assign Investment Profile to Model Order - OITA
5. Define Order Type (Investment) - KOT2
a. Settlement Profile - OKO7
b. Maintain Allocation Structures - OKO6
Thanks
SanjaiHi Sreekanth,
What is the setting needed to create AUC Automatically when an Internal order is created ?
I have done all the setting, but still when I save Internal order neither AUC asset is getting created.
So I went to extras selected create AUC and it went to AS01, but when I came back (F3) from AS01 to Internal Order and save , Auc Asset is not getting captured in the settlement rule. I even tried to give manually the AUC Asset in the settlement rule, for which sys is not allowing in the settlement rule.
Any thoughts are highly appreciated
Advance Thanks
Sanjai
Maybe you are looking for
-
Acrobat Pro 10.12 not possible to sign a pdf with a valid cert
Hello, Under Windows 7 x64, it's not possible to sign a PDF with a valid certificate. Clicking the sign button gives no response and no message what so ever. When using a non valid certificate as in not certified to use for signing, it is accepted an
-
Itunes cannot be open because of a problem. Process: iTunes [360] Path: /Applications/iTunes.app/Contents/MacOS/iTunes Identifier: com.apple.iTunes Version: ??? Build Info: iTunes-1115011001005005~2 Code Type:
-
SCCM Wim on USB Drive - Add Packages/Apps and Keep all my settings
Would the appropriate commands to perform this task and minimize the disk space be: dism.exe /capture-image and dism.exe /append-image?
-
How to transfer photos from Imac to Macbook Pro using firewire?
What is the best way to transfer photos from my Imac to Macbook Pro using firewire?
-
Downgrade OS Mac 10.6 Leopard to OS Mac 10.5 Leopard ?
My MacBook Pro used OS Mac 10.6 Leopard, now i want to downgrade, and install OS Mac 10.5 Leopard. Is that OK ?