New notifications in 2LIS_17_I0NOTIF?

Hi,
I can't figure out how to get new maintenance notifications to show up in the 2LIS_17_I0NOTIF datasource. Here is how I can reproduce the problem:
Run the 2LIS_17_I0NOTIF extraction from RSA3.
Note the result count (in my case on IDES system 297).
Add a maintenance notification using IW21 and save it.
Re-run the 2LIS_17_I0NOTIF extraction from RSA3 and the result count is exactly the same (297).
I found note 667544 on this extraction being empty which instructed me make sure the update group for the notifications is not blank. I checked and it is set to 26 (PMIS: General).
How do I get the new notifications to show up in the extraction?
Thanks for any help.
Rob

The RSA3 only extracts the data which has been stored in the setup tables (e.g. MC17I00NTFSETUP). When adding a notification you do not add a record to the setup table automatically.
The setup tables are for full uploads, e.g. providing data for a delta init. So you will have to build them with the appropriate setup transaction (e.g. OLIIBW).
Generally you will get delta records for an extractor only if you have activated the updating in tr. LBWE and if you have replicated the data source from the BW.
Depending on the update mode of the application (see LBWE) you will then automatically see a single change either in SM13 (V3 updating), LBWQ (Queued Delta) or RSA7 (Direct Delta).
Hope that helps,
Bernd Sieger

Similar Messages

  • How to get new notifications in extractor 2LIS_17_I0NOTIF .

    Hi,
    How to extract new notifications from this extractor - 2LIS_17_I0NOTIF.  I am only getting notifications of type M2 . We want to get other notification no which are of type other than M2 , for example P0. Notifications for type P0 are already there in the system.
    i refered to the sap note - 667544 which says that update group is not maintained. I checked in SPRO, update group is also maintained for other notification types .
    Any suggestion will be helpful .
    Regards,
    Ashutosh Singh

    Hi,
    i have checked everything in BI side, there is no such restriction on notification type . I even took a notification number of type P0 and tried filling setup tables. 0 records were filled. But when i tried to fill the set up tables with a notification number of type M2, 1 record came in the setup tables.
    So i am guessing its some kind of setting in SPRO which needs to be done .
    Any suggestions on this matter will be helpful.
    Thanks,
    Ashutosh Singh

  • This is a new notification coming up with iTunes, why and how do I fix it? The song "Penny Lane" could not be used because the original file could not be found. Would you like to locate it?

    This is a new notification coming up with iTunes, why and how do I fix it?
    The song “Penny Lane” could not be used because the original file could not be found. Would you like to locate it?
    Max

    Hey xxCreepyFiaxx,
    First, I would try the following suggested steps for when you don't see content in iTunes after updating:
    Quit iTunes.
    Download and install the latest version of iTunes.
    Use the Finder (Mac) or Windows Explorer (Windows) to go to the iTunes folder that contains the iTunes library files:
    Mac OS X
    /Users/username/Music/iTunes/
    Microsoft Windows Windows XP and Windows 2000
    \Documents and Settings\username\My Documents\My Music\iTunes\
    Microsoft Windows Windows Vista and Windows 7
    \Users\username\Music\iTunes\
    Drag the iTunes Library file from the above location to the Desktop.
    Open the Previous iTunes Libraries folder in the iTunes folder.
    Locate the file named iTunes Library YYYY-MM-DD where YYYY-MM-DD is the date you upgraded iTunes (Year-Month-Day).
    Drag this file to the iTunes folder (the enclosing folder).
    Rename this file to iTunes Library.
    Open iTunes.
    You should now see your missing content in iTunes.
    via: No content shows up in iTunes after updating
    http://support.apple.com/kb/TS1967
    If that doesn't resolve the issue, then I'd go through the steps in here:
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/TS1408
    Have a good one,
    Delgadoh

  • Error creating work order for new notification - Related SyncBO not present

    Hi,
    We are working with MAM3.0 standard application.
    We age getting an  error while creating work order for a NEW notification.
    In this scenario both notification and corresponding work order are also not created.
    Here is the error for MAM30001 Sync BO in MEREP_MONI:_
    Reading inbox record (mobile ID=0000001444, seq, no.=29, rcd_cntr=1, data=TOP0001000000
    External format successfully converted to internal format: ldata=TOP0001000000000000000
    Related SyncBO MAM30_010 with Sync key 0000000028 is not present on the device.
    Return code 1 (DOWNLOADER)                                                   
       Here is the error for MAM30010 Sync BO in MEREP_MONI:_
    Return code from RFC BAPI Wrapper call:Order NEW does not exist
    Return code from RFC BAPI Wrapper call:The order/network type  is not defined
    Return code from RFC BAPI Wrapper call:Order NEW does not exist
    Return code 0 (UPDATE MEREP_506-STATUS)                                      
    Can any body please tell me what is the sollutions for this error
    your help in this regard is appreciable.
    Regards,
    Murthy

    Hi Murthy,
    II have no idea what patch level you are on. A while back we had similar issues with some clients. There are several patches around that area available. Perhaps you should have a look into patch 959732.
    Hope that helps.
    Regards,
    Oliver

  • Problem with new Notifications on Mountain Lion

    The new 'notifications' on Mountain Lion are appearing on the top right of one of my MacBooks and staying there until manually closed whereas on the other they disappear after a few seconds. I can not figure out why. Does anyone know?

    It is the difference between Alerts and banners. Go to System Preferences > Notifications to choose. banners disappear and Alerts don't.
    Message was edited by: hpr3

  • What is causing day old notifications to repeat along with new notifications?

       About a year ago my Instagram began repeating a old notification, it repeated along with a new notification. It was never consistent, it stopped then started, went on for a couple hours or sometimes all day. Nothing that I was doing caused or stopped the notifications. The notification was different everyday. I have screenshots. I googled around, all I could gather was that very few people were coming forward with similar problems and little information about what was causing it was available. I was using my iPod 5th gen. This is what it the repeat notification would look like,
            @Robyn_1 liked your photo now
            @matt1 liked your photo yesterday, 9:29pm
            @Robyn_1 liked your photo 25 seconds ago
            @Robyn_1 like you photo 1 minute ago
          I signed into my account on my husbands phone and watched for repeat notifications but it never happened once. I made a new account with Instagram thinking my account may have been hacked. But it never stopped.
    I called apple, my iPod still being under warranty I had a free call or something. I blabbed away, happy to tell someone who would perhaps help me. Only to get cut off 5 minutes in getting no help whatsoever. I never called back. I upgraded with my cable/internet company and had a new modem or router ( unsure what the difference is) delivered. It was over a week before the notifications began again. I called again and had my modem reset but It continued.
    Meanwhile, I had noticed a lag in the response time while typing, I'm trying to say that I could type entire sentences before my iPod would catch up.This is when I started watching my crash logs, looking for anything that might help me understand why this was happening. That's when I found "Bad magic", a mysterious process(?). A google search brought up nada. I posted on a developer forum asking "What is Bad magic" and I was told by one person that he'd never heard tell of it and to report it to the bug reporter. I never did, because I don't know how.  I have screenshots. But I don't know how to load them. Here is a piece of one of the logs. Listed under  ExcResource_MobileSafari.
    Bad magic 0x27D8ABFC
    Microstackshots: 1 (from 2147483647-10-02 21:00:00 -0400 to 2147483647-10-02 21:00:00 -0400)
      1 CoreFoundation 0x2f3e1000 + 614681 [0x2f477119]
        1 ??? [0x27d8a9b8]
          1 UIKit 0x31c1c000 + 72655 [0x31c2dbcf]
            1 ??? [0x27d8a8e0]
              1 UIKit 0x31c1c000 + 73143 [0x31c2ddb7]
                1 ??? [0x27d8a880]
                  1 UIKit 0x31c1c000 + 519353 [0x31c9acb9]
                    1 ??? [0x27d8a860]
                      1 UIKit 0x31c1c000 + 549307 [0x31ca21bb]
                        1 ??? [0x27d8a84c]
                          1 UIKit 0x31c1c000 + 549411 [0x31ca2223]
                            1 ??? [0x27d8a824]
                              1 UIKit 0x31c1c000 + 549531 [0x31ca229b]
                                1 ??? [0x27d8a800]
                                  1 UIKit 0x31c1c000 + 551211 [0x31ca292b]
                                    1 ??? [0x27d8a494]
                                      1 UIKit 0x31c1c000 + 2425361 [0x31e6c211]
                                        1 ??? [0x27d8a400]
                                          1 UIKit 0x31c1c000 + 2425593 [0x31e6c2f9]
                                            1 ??? [0x27d8a3a8]
                                              1 MobileSafari 0x74000 + 320663 [0xc2497]
                                                1 ??? [0x27d8a394]
                                                  1 MobileSafari 0x74000 + 290765 [0xbafcd]
                                                    1 ??? [0x27d8a370]
                                                      1 WebCore 0x372a4000 + 792019 [0x373655d3]
                                                        1 ??? [0x27d8a360]
                                                          1 WebCore 0x372a4000 + 788405 [0x373647b5]
                                                            1 ??? [0x27d8a350]
                                                              1 libsystem_pthread.dylib 0x39dee000 + 3855 [0x39deef0f]
                                                                1 ??? [0x27d8a308]
                                                                  1 libsystem_kernel.dylib 0x39d75000 + 77736 [0x39d87fa8]
                                                                   *1 ??? [0x8
      I still occasionally use my iPod, but it only has the basics, plus games I've download for my kids. Now games like "pet doctor" and "celebrity dentist" repeat notifications every once in a while. It looks like this..
      Pet doctor 4:35pm
      Pet Doctor 5 days ago
      Pet Doctor 12 days ago
       Since then, I have purchased a brand new 5s, it was a fresh start, I knew there was no possible way I would have any problems because it was new. That was less than two months ago. Today the repeat notification started on my 5s., but only with Instagram .  have no idea why. I downloaded a process viewer but nothing stands out to me. Only EscrowSecurityAllert, but I have no idea what that is. I did find a crash log titled FlashStatus, 
    Date:2014-02-12 20:05:31 -0400
    Incident ID:9F4D7342-BF3A-4D0B-A10E-1381B99BC3F9
    Hardware Model: iPhone6,1
    OS Version: iOS 7.0.4 (11B554a)
    System ID:
    2014-02-11 20:01:10 -0400 addaily[337]: Factory
    ^^ that is the entire crash log. Is it possible that the two are somehow connected?
    I hope that someone will take the time to mull this over. There must be a cause. I am aware that iOS devices are safe, but something is causing these problems. Theoretically, what could be the problem? 

       About a year ago my Instagram began repeating a old notification, it repeated along with a new notification. It was never consistent, it stopped then started, went on for a couple hours or sometimes all day. Nothing that I was doing caused or stopped the notifications. The notification was different everyday. I have screenshots. I googled around, all I could gather was that very few people were coming forward with similar problems and little information about what was causing it was available. I was using my iPod 5th gen. This is what it the repeat notification would look like,
            @Robyn_1 liked your photo now
            @matt1 liked your photo yesterday, 9:29pm
            @Robyn_1 liked your photo 25 seconds ago
            @Robyn_1 like you photo 1 minute ago
          I signed into my account on my husbands phone and watched for repeat notifications but it never happened once. I made a new account with Instagram thinking my account may have been hacked. But it never stopped.
    I called apple, my iPod still being under warranty I had a free call or something. I blabbed away, happy to tell someone who would perhaps help me. Only to get cut off 5 minutes in getting no help whatsoever. I never called back. I upgraded with my cable/internet company and had a new modem or router ( unsure what the difference is) delivered. It was over a week before the notifications began again. I called again and had my modem reset but It continued.
    Meanwhile, I had noticed a lag in the response time while typing, I'm trying to say that I could type entire sentences before my iPod would catch up.This is when I started watching my crash logs, looking for anything that might help me understand why this was happening. That's when I found "Bad magic", a mysterious process(?). A google search brought up nada. I posted on a developer forum asking "What is Bad magic" and I was told by one person that he'd never heard tell of it and to report it to the bug reporter. I never did, because I don't know how.  I have screenshots. But I don't know how to load them. Here is a piece of one of the logs. Listed under  ExcResource_MobileSafari.
    Bad magic 0x27D8ABFC
    Microstackshots: 1 (from 2147483647-10-02 21:00:00 -0400 to 2147483647-10-02 21:00:00 -0400)
      1 CoreFoundation 0x2f3e1000 + 614681 [0x2f477119]
        1 ??? [0x27d8a9b8]
          1 UIKit 0x31c1c000 + 72655 [0x31c2dbcf]
            1 ??? [0x27d8a8e0]
              1 UIKit 0x31c1c000 + 73143 [0x31c2ddb7]
                1 ??? [0x27d8a880]
                  1 UIKit 0x31c1c000 + 519353 [0x31c9acb9]
                    1 ??? [0x27d8a860]
                      1 UIKit 0x31c1c000 + 549307 [0x31ca21bb]
                        1 ??? [0x27d8a84c]
                          1 UIKit 0x31c1c000 + 549411 [0x31ca2223]
                            1 ??? [0x27d8a824]
                              1 UIKit 0x31c1c000 + 549531 [0x31ca229b]
                                1 ??? [0x27d8a800]
                                  1 UIKit 0x31c1c000 + 551211 [0x31ca292b]
                                    1 ??? [0x27d8a494]
                                      1 UIKit 0x31c1c000 + 2425361 [0x31e6c211]
                                        1 ??? [0x27d8a400]
                                          1 UIKit 0x31c1c000 + 2425593 [0x31e6c2f9]
                                            1 ??? [0x27d8a3a8]
                                              1 MobileSafari 0x74000 + 320663 [0xc2497]
                                                1 ??? [0x27d8a394]
                                                  1 MobileSafari 0x74000 + 290765 [0xbafcd]
                                                    1 ??? [0x27d8a370]
                                                      1 WebCore 0x372a4000 + 792019 [0x373655d3]
                                                        1 ??? [0x27d8a360]
                                                          1 WebCore 0x372a4000 + 788405 [0x373647b5]
                                                            1 ??? [0x27d8a350]
                                                              1 libsystem_pthread.dylib 0x39dee000 + 3855 [0x39deef0f]
                                                                1 ??? [0x27d8a308]
                                                                  1 libsystem_kernel.dylib 0x39d75000 + 77736 [0x39d87fa8]
                                                                   *1 ??? [0x8
      I still occasionally use my iPod, but it only has the basics, plus games I've download for my kids. Now games like "pet doctor" and "celebrity dentist" repeat notifications every once in a while. It looks like this..
      Pet doctor 4:35pm
      Pet Doctor 5 days ago
      Pet Doctor 12 days ago
       Since then, I have purchased a brand new 5s, it was a fresh start, I knew there was no possible way I would have any problems because it was new. That was less than two months ago. Today the repeat notification started on my 5s., but only with Instagram .  have no idea why. I downloaded a process viewer but nothing stands out to me. Only EscrowSecurityAllert, but I have no idea what that is. I did find a crash log titled FlashStatus, 
    Date:2014-02-12 20:05:31 -0400
    Incident ID:9F4D7342-BF3A-4D0B-A10E-1381B99BC3F9
    Hardware Model: iPhone6,1
    OS Version: iOS 7.0.4 (11B554a)
    System ID:
    2014-02-11 20:01:10 -0400 addaily[337]: Factory
    ^^ that is the entire crash log. Is it possible that the two are somehow connected?
    I hope that someone will take the time to mull this over. There must be a cause. I am aware that iOS devices are safe, but something is causing these problems. Theoretically, what could be the problem? 

  • When someone modify the coding in the notification, a new notification with the same task is created (QM02)

    Hi,
    When someone modify the coding in the notification, a new notification with the same task is created (QM02).
    How to stop this duplicate notification?
    Regards,
    Shiva

    Hello Shivasharanappa,
    This is due to your Inspection type configuration. I guess "One Q-Notification per Insp. Lot" Indicator is not set for the inspection type you are using.
    Go to QCC0>Quality inspection>Inspection Lot Creation>Maintain Inspection Types>Select Inspection type
    Here, Set indicator for "One Q-Notification per Insp. Lot". If this indicator is set system will combine all newly added defects into previously created notification.
    Amol.

  • Create new notification from action box

    Hi,
    We have the following scenario: In transaction IW52 (Notification modification) we have created a new follow-up function, with this new function we want to create a new notification with some data from the current notification.
    The activity of the new follow-up function executes a Z function module. Everythings works fine except that when the function module is finished and the new notification is created it shows the IW52 transaction with all fields blank.
    We have tried to do it with the functions mdules from IQS0 group function and with business object BUS2080, both options had the same result.
    With the debuging we have found that when the follow-up action is called from standard code in SAPLIQS0 - LIQS0F75 - FUNKTION_ACTIONBOX_F75 the viqmel is null when follow-up action is ended:
              CALL FUNCTION l_funktion-baustein
                EXPORTING
                  i_viqmel       = viqmel
                  i_customizing  = l_funktion
                TABLES
                  ti_iviqmfe     = l_iviqmfe
                  ti_iviqmur     = l_iviqmur
                  ti_iviqmsm     = l_iviqmsm
                  ti_iviqmma     = l_iviqmma
                  ti_ihpa        = l_ihpa2_tab
                EXCEPTIONS
                  action_stopped = 1.
    Thanks.
    Edited by: Sistemes Emaya on Oct 28, 2011 10:46 AM

    Hi,
    In this case follow below steps mentioned below.
    Action box in IW52 trigger your Z Function module so use below steps may it will help you.
    Inside your Z Function module-
    1 ) Get notification number from Parameter id using command "GET PARAMETER ID XXXXXXX" .
    2 ) Fetch relevant records from database on behalf of notification number which you get in step 1.
    3 ) Use records in your Z Function module to create another notification as per your requirement. 
    Thanks,
    Vijay

  • My ipod wont tell me when i get new notifications and it started happening right after i updated it

    after i updated my ipod it wont tell me when i get new notifications and it says i shuld sync it to itunes i did that and im still not getting new notifications also my imessage and facetime aren't working
    Message was edited by: max83636893

    Go into your settings, are the push notifications turned on? Same with messages.

  • How to add a new notification medium

    Hello,
    In properties for Notification --> standard tab --> Medium
    I have the choice of Email, Fax, Pager, SMS and Voice.
    Question, How do I add a new notification medium?
    regards
    Sanjiv

    Are you talking about BPA Suite?

  • New notification profiles? User defined notificaiton profiles?

    Is there a way to create a new notification profile? In older BB, I could setup a "Loud" profile that was extra loud, but in the OS10, i can't create a new profile at all. Note I am on OS 10.1.

    Not currently.
    If you've been helped click on , if you've been saved buy the app.
    Developer of stokLocker, Sympatico and Super Sentences.

  • Does the iPad2 get the new notification centre with iso6?

    Upgraded my iPad2 to iso6 and I can't see Facebook in my notification centre, does the iPad2 get the new notification centre with iso6?

    Hello, can you please help me ?
    You specified sample payload here:
    TerrellFromLockhart wrote:
    I finally got this to work. The picture in the Programming Guide is very confusing. The solution was to prefix every message's frame data with command 2 and that messsage's frame data length. Here is a sample:
    ANS frame: 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 2 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 3 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 4 4 0 4 83 7 199 195 5 0 1 10
    About to read response at Thu Feb 20 15:40:20 CST 2014
    SocketTimeoutException
    2 - is clearly command
    0 0 0 77 - frame length
    1 - item Id
    what's 0 32 ? According to this page https://developer.apple.com/library/ios/documentation/NetworkingInternet/Concept ual/RemoteNotificationsPG/Chapters/Commu…
    Item id  should be followed by item length. But item length is obviously greater than 32 because device token's length is 32. Can you please explain why 0 32 were used? and do you have any insight on item id meaning ?

  • New Notification Type

    Hello I have created a new notification type and I am getting a few errors to creating the subset of data screens or maintaining  field selections.
    One of the errors I am getting is
    "Subscreen data for subscreen category not maintained" and "Screen setting for notification type N1 not maintained"
    I am not sure how to fix this, please help.

    You are on the right track. Under Define Screen Template go to Define Screen Areas and Tabs. Select the notification type and go to Extended View.
    Here add Tabs and Screen Areas as depicted in the screenshot below for each of the tabs.
    Regards,
    Piyush Sagolekar

  • Older post from apple support community delivered on gmail show in Mail App when new notification received

    Hi all,
    I am using Mail as a client to my Gmail account.
    I am registered with such account to receive notification about new posts from Apple Support Communities on which I took part.
    However when I receive a new mail notifications, I get a huge list of post, it basically seems the whole conversation.
    Even if the grouping done by Mail App shows 1 message only, I can see lot of posts attached to the mail.
    Apparently by deleting the group or the very latest mail, it deletes the whole conversation, but everytime a new mail arrives, the conversation shows again.
    By doing a search for sender and subject on notification arrival, only one mail shows from the results.
    When deleting the mail, the whole conversation gone from Mail App, did the search again with same criteria, and got 0 result.
    Why this behavior ? Am I missing something ?

    *I figured it out!*
    Simple fix, here is what you do - open Mail v4.2 > Preferences
    Select your Gmail account with this weird problem (I say select, cause in my situation I have multiple Gmail account setup but was having trouble with 1).
    Then goto > Advanced tab
    and then just type "/" (forward slash) - and then wait for a minute, it should fix it and allow to receive all the ghosts messages again - which apparently were visible under my online (web based) gmail.com's account also on my iPhone. You might see double messages, don't freak out like I did - Quit Mail v4.2 and restart that should go away as well, like in my case. Strange? Definitely
    Anyways, hope this helps!

  • LED won't stop flashing, even when there are no new notifications

    The LED on my BlackBerry won't stop flashing, and I can't work out why. I have no new emails, messages, Facebook notifications, Twitter mentions, appointments/calendar events, and the LED didn't flash for new articles in the TIME magazine app any way. None of the other apps have anything to notify me of either.
    I updated the OS some time ago, so I can't see that being the cause for the problem, which means I can not work out why the LED is still flashing, unless my BlackBerry is broken.
    Has anybody else had this problem?
    Running OS v4.6.1.310 (Platform 4.2.0.127)
    Solved!
    Go to Solution.

    Hi danphynes,
    Are you still experiencing this issue? If so, what color is the LED? Can you verify that the LED coverage indicator is disabled in Options -> Screen/Keyboard? Is the LED flashing red continually or does it stop for periods of time?
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

Maybe you are looking for

  • HP Eprint app

    I downloaded the HP Eprint app from the Google store, there it states that the app will work in landscape view on tablets with screens 7" and larger, my tablets screen is 10.1", it is running Android 4.0.3 ICS and yet when I open up the HP Eprint app

  • Help! How to create Jar file for a packaged class?

    Hi! I am new in jar complexities. I made a swing frame that just prompts a JOptionPane when executed. I accomplished the same using jar without packaging my class SwingTest. But when i package it, it doesn't run. Can any one tell me how to make jar f

  • Iphone not auto syncing when connected

    i have the auto sync when connected option enabled on itunes, but when i plug my phone in, nothing happens. when i launch itunes, then dis- and reconnect the phone, it's fine and syncs everything. ideas? this just started happening.

  • Can you sync only part of an address book to a trio?

    the situation: if you have lots and lots of contacts in your address book, and only want some of them on your pda, is there a way to do this? also, is there a way to create seperate address books. I can only seem to make new groups. thank you.

  • How to Sideload WinRT App in WinRT 8/8.1 Machine with Volume License Key

    Hi, I think I dont quite follow the documentations on Sideloading base on the following links : The documentations are base on Development-PC is joined to the Enterprise Domain. Configure PCs for Sideloading Requirements a) http://technet.microsoft.c