New numbers for each contact?

Do I have to have different "skype numbers" for each contact in the U.S. when calling from my mobile phone in Chile? Or is there a way to call one local number to connect to Skype and then dial the U.S. number I want?

rachelbutts wrote:
Ok, but how do I do the second option? I only know how to get different skype numbers for each contact.
Hello,
Call your SkypeToGo # to set up a call and then dial the # of the individual contact you wish to call. This may assist:
Skype To Go number?intcmp=SN-Mods
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Similar Messages

I have four devices on one Apple ID, i have separate emails and phone numbers for each device but when I tried to add one to my iPod, it said that the email was already in use.

I have four devices on one Apple ID, i have seperate emails and phone numbers for each device but when I tried to add one to my iPod, it said that the email was already in use. I have tried many things and the only guess I have is that either someone else has this email as their iMessage but is fake or it wasn't taken off my old iPod when I reset it. Any ideas on what to do?

Thanks but that doesn't give me the information I need. I am putting an email on my ipod for people to contact me for iMessage and FaceTime but when I put the email in, it gives me an error saying that the email cannot be veirified because it is already in use. My Apple ID can be varified, just not the email that they will contact me with.

Ringtones for each contact in N900

Is there any way to assign a ringtone for each contact in N900.
Any tutorial or application for this is appreciable.

yes.
read my post here
it was the very first post on this forum when you created this thread. please look at the forum or do a search before you place new threads.

Reset Page Numbers for each group with XMLP 4.5

I am currently working on the invoice report rtf template using XMLP 4.5
We cannot upgrade to new version at this stage.
Our requirement is, i want to reset the page numbers for each invoice. I know that it can be achieved using @section. I think this will work only XMLP 5.0 and after. Is there any other way to achive this requirement?
Our reports are moving to production in another 3 days.
I would be thankful If anybody can provide me the solution for this problem?
Thanks
Babu

Hi Tim
Thank you very much for your suggestion. We have upgraded to latest version of XML and now i am using @section to reset the page numbers for each invoice. This is working fine. But i have stucked to print the invoice copes for which page numbers should be reset.
As per the client requirement i need to generate the invoice report with 3 more copies where COPY word will be there for duplicate invoice copies.
I have written the rtf template logic like below:
ex: <?for-each@section:G_INVOICE?>
Invoice Information
Invoice first copy information with COPY word (just copy the above original invoice layout and pasted)
Invoice second copy information
Invoice third copy information
<?end for-each?>
This is working fine. But client is demanding that all the invoice copies page numbers should start with 1. I tried by giving the @section for each invoice copy. But it was not working. Is there anyway to reset the page numbers for each invoice copy (anyway orginal invoice page numbers are resetting becuase i have used @section). It would be great help for me by providing the solution for my problem.
Thanks
Babu

FillBy always fills in the same row in data grid view. How to make it fill in a new row for each click of the Fillby Button? VB 2010 EXPRESS?

Hi there,
I am a beginner in Visual Basic Express 2010. I have a Point of Sale program that uses DataGridView to display records from an external microsoft access
database using the fillby query.
It works, but it repopulates the same row each time, but i want to be able to display multiple records at the same time, a new row should be filled for
each click of the fillby button.
also I want to be able to delete any records if the customer suddenly decides to not buy an item after it has already been entered.
so actually 2 questions here:
1. how to populate a new row for each click of the fillby button
2. how to delete records from data grid view after an item has been entered
Thanks
Vishwas

Hello,
The FillBy method loads data according to what the results are from the SELECT statement, so if there is one row then you get one row in the DataGridView, have two rows then two rows show up.
Some examples
Form load populates our dataset with all data as it was defined with a plain SELECT statement. Button1 loads via a query I created after the fact to filter on a column, the next button adds a new row to the existing data. When adding a new row it is appended
to the current data displayed and the primary key is a negative value but the new key is shown after pressing the save button on the BindingNavigator or there are other ways to get the new key by manually adding the row to the backend table bypassing the Adapter.
The following article with code shows this but does not address adapters.
Conceptually speaking the code in the second code block shows how to get the new key
Public Class Form1
Private Sub StudentsBindingNavigatorSaveItem_Click(
sender As Object, e As EventArgs) Handles StudentsBindingNavigatorSaveItem.Click
Me.Validate()
Me.StudentsBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.MyDataSet)
End Sub
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'MyDataSet.Students' table. You can move, or remove it, as needed.
Me.StudentsTableAdapter.Fill(Me.MyDataSet.Students)
End Sub
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
Me.StudentsTableAdapter.FillBy(Me.MyDataSet.Students, ComboBox1.Text)
End Sub
Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
Me.MyDataSet.Students.AddStudentsRow("Jane", "Adams", "Female")
End Sub
End Class
Get new key taken from
this article.
Public Function AddNewRow(ByVal sender As Customer, ByRef Identfier As Integer) As Boolean
Dim Success As Boolean = True
Try
Using cn As New OleDb.OleDbConnection With {.ConnectionString = Builder.ConnectionString}
Using cmd As New OleDb.OleDbCommand With {.Connection = cn}
cmd.CommandText = InsertStatement
cmd.Parameters.AddWithValue("@CompanyName", sender.CompanyName)
cmd.Parameters.AddWithValue("@ContactName", sender.ContactName)
cmd.Parameters.AddWithValue("@ContactTitle", sender.ContactTitle)
cn.Open()
cmd.ExecuteNonQuery()
cmd.CommandText = "Select @@Identity"
Identfier = CInt(cmd.ExecuteScalar)
End Using
End Using
Catch ex As Exception
Success = False
End Try
Return Success
End Function
In closing I have not given you a solution but hopefully given you some stuff/logic to assist with this issue, if not perhaps I missed what you want conceptually speaking.
Additional resources
http://msdn.microsoft.com/en-us/library/fxsa23t6.aspx
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Create new session for each window opening

From a jsp page i open a page called student.jsp by clicking on students admision no.Therefore lots of pages can be opend in new windows with relevent student details.
but when i click on the link i called a servlet, get relevent details and redirect to student.jsp. The problem is ,all opened windows have same session id and there are session conflicts.
How can i create new sessions for each page thru the servlet or is there any other alternatives

I actually was working on a problem that was similar to this, and the problem is with how each web-browser works with sessions...
Each browser window (Except in one case with IE) will use the same session in each window.
However, you might be able to use URL-Rewritting to manage your sessions and get around using cookies for for session tracking. I personally haven't tried this, but I'm betting that it will work.
Best of Luck,
Nate

I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The wid

Question.
I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The widget disappear in bloc legend. disparaître. Have you one solution?
Thank you,
Loïc

Accordion or Tabbed panel should to it, with click and open container.
Please provide site url where this does not work, also if you can provide an example where we can see the exact action then it would help us.
Thanks,
Sanjit

New features for each version of Hyperion major planning

Good morning,
I'd like to work on the list of the new features for each of Hyperion Planning major version release: 9.0, 9.1, 9.2, 9.3, 9.3.1. But if there's already available guide/ chart for this, I'd love to refer to that particular documentation.
Thanks a lot and have a nice day
Adrian

Please check the Release content document - Release 12 Financial Applications, which gives the new functionality of the GL module and there is no doc number for this document, I can send it by email if you want.
Srini C

Changing ringtones for each contact?

How do I set the ringtones for each contact? I can't find out how to do it, and the Verizon guy couldn't help.
John185

Try this:
1) Long press on a contact
2) select "View contact"
3) press the Menu button on the bottom left of the phone (the one with the 4 squares)
4) select "Edit"
5) select "Additional info" at the bottom and tap the triangle
6) select "Ringtone"

Documents Sequence numbering for each Branch (Branch as segment)

dear Brother's
can help me in this case
Documents Sequence numbering for each Branch (Branch as segment)
Each branch have an own sequence
I implement oracle Business suite ERP for Five Branch ( KSA,INDIA,DUBIA ,JORDAN ,SYRIA )
I want to segregate sequence numbering for each branch, sequence for (
Sales order, invoice, purchase order, Invoice)
Is there a possibility to link sequence with any segment I define it in COA like Branch
Note: I work in single Operating Unit

Hi,
You might be able to adapt this solution to work for your case: https://acrobat.com/#d=*2slxPLc6c-H0U449vA4jQ. It's more about page numbers for different Master Pages, but you may be able to tie it to the different data nodes.
Niall

Default email for each contact when emailing to a group?

Hi
When I use Mail.app's shortcut for sending email to a group, I don't seem to have control over which of several emails (work, home, etc.) that exists is being used for each contact.
I want to specify a default email for each contact so that I don't have to manually adjust each contact.
Is there any way to do this?
Thanks!

Make 2 contacts with an email address each rather than 1 contact with 2 addresses.

Unable to set ringtone for each contact

After upgrade to the 5.1.1 iOS I was not able to set individual ringtone to each of contact anymore.
All my contacts are using the same default ringtone when ever anyone calls.
When I go into contact and hit edit I can see the different ringtone already setup for each contact and when I click it I can hear it play just fine. Then I exit and went back to main screen and try to call the phone and it still using the default ringtone.
Any idea how did this happen or how to fix it? I am trying not to reset the phone.
Thanks

When you call your phone from another, is your iPhone picking up the caller ID that is in your Contacts, or does the incoming call just have a number (or maybe "unavailable")?
Also, there should be no harm in Resetting your iPhone, that is not the same as Restoring it (even if you did Restore it, you could back it up first and re-load the backup as long as your Contacts and Camera Roll are backed up somewhere).

How do I create a new Folder for each test report based on Serial number?

I want to be able to create a new folder for each test report based on serial number. Each time a UUT is tested, I want the report to go to the appropriate folder. What is the best way to do this?
Thanks

Hello Tman,
This is a slightly tricky question. The reason being, the report options like the report path etc, are set before you see the serial number prompt when you run your UUT. There might be other ways of getting around this, but a quick solution would be modifying the process model.
I modified the PreUUT callback to set the report options. I passed the reportOptions as a parameter to this sequence. In the PreUUT sequence, I set the following fields:
Parameters.ReportOptions.GeneratePath=False
Parameters.ReportOptions.ReportFilePath= "c:\\"+ Locals.SerialNumber +"\\report.xml"
I hope this would give you an idea.
SijinK

How to setup separate rington for each contacts?

Will someone point me to a tutorial or show me how to setup separate ring-tone for each contacts?

http://support.apple.com/kb/HT1413
Assign a ringtone to a contact
From Phone, tap Contacts and choose a contact. Tap Ringtone and choose a ringtone. When that person calls, you hear that ringtone.

New layer for each artboard

Hi,
I've just recently started learning Illustrator and have used photoshop for a long time. I have been getting on OK and yesterday had a file open with about 4 different artboards (was making wedding invitations) and went to start a 5th one and decided to add a new layer to this artboard and it then struck me that all the artboards had exactly the same layer! Now as a photoshop user this bamboozled me and the photoshop part of me gets annoyed, because I would like every artboard to have a different set of layers so that they are always separate. Can anyone tell me if I'm just not grasping how illustrator does things or is there a way to set up illustrator to have a new set of layers for every artboard? Is it just a case that I have to create a new layer for each artboard manually?
Sorry if this is a basic question, but I've searched for this answer but couldn't find it.
Cheers in advance.
Oh and just in case, I'm using CS5 on an iMac.

and the photoshop part of me gets annoyed
You need to "turn off" the photoshop part of you when working in Illustrator. Two entirely different worlds, and rightly so.
because I would like every artboard to have a different set of layers so that they are always separate.
If that's what you want, there are other programs in Illustrator's category which provide that. Corel Draw X3 is one example. In real use, though, page-specific layers is not the panacea you may think. It has resulted in much tedium and confusion and consternation in the Draw community.
If you insist on working that way, there's no reason you can't set up your file with top-level Layers coresponding to each Artborad. But you'll probably soon find it more cumbersome and tedious than actually practical.
Forget trying to think of Illustrator Layers and Photoshop Layers as similar things. They are not. Two entirely different constructs. That's a good thing. They should not be made to "work alike." If anything, Photoshop just needs to change the name from "Layers" to "Films" or "Overlays" or something like that, to help stop this widespread misconception among newcommers.
JET

New numbers for each contact?

Similar Messages

Maybe you are looking for