New Nvidia Driver ver 260 for Mac Mini 2010 and HDMI problems.

So this is the first release from Nvidia that is installable "out of the box" directly from Nvidia. Unfortunately, I'm now running into problems with getting the resolution to scale on my HDMI connected HDTV.
When I go into Nvidia properties and select "Adjust desktop size and position", I'm only give 4 options to change the scaling. Unlike the old Bootcamp version which had an option to manually adjust the screen by make the arrows fit on all sides, this new version has the options of:
When using a resolution lower than my displays native resolution...
-Use NVIDIA scaling
-Use NVIDIA scaling with fixed aspect ratio
-Use my display's built-in scaling
-Do not scale
So when I set my display to 1176x664, The resolution changes, however, it still goes beyond the visible border. Changing any of the options above doesn't seem to change anything-
I'm wondering if anyone is experiencing these same issues, or knows how to remedy it?

I completely agree with your assessment for Problem #1, but here we have it.
I will try re-installing and will also double check with the drivers for the monitor. Thanks for the advice. If all else fails, I will just use parallels.

Similar Messages

  • Why do new hard drives keep failing in Mac Mini OSX Server?

    Why new new hard drives keep failing in Mac Mini OSX server?

    If it only failed in 8 days.. I just return the drives back to newegg and get a different brand like western digital. NewEgg has a 30 day return policy.
    If you deal with any hard drive manufacturer now, they will give you a refurbished item and not a new item that you are entitled.
    As for testing  hardware....
    http://support.apple.com/kb/HT1509
    even if it still passed Apple tests.. it does not mean logicboard is fine..... it just means it passes the tests.
    At this point, If i were you, I would just go back to NewEgg and send back the Seagates letting know they are bad and prefer a different brand such as Western Digital.
    Install the Western Digitals and see how long they last. If they fail again in a a short amoung of time, it's the logicboard then.
    This is based on experience in dealing with repairs with Macs, PCs, and other various kinds of Servers and computers over the last 10+ years.
    In fact, One of my clients who has a Dual 4-core Intel Xeon Server with a Supermicro logicboard, one of their SATA drive ports are bad. Every 4 months like clock work the Mirror RAID Drive would degrade on that port. Then after figuring out that the drives are not necessary bad, I swapped to using another spare  SATA port and since then no problems.

  • Mac Mini 2010 and Windows 7

    Hello All,
    I searched the forums to see if my question had already been answered, but I couldn't find it. My apologies in advance if this, in fact, is solved. I am having some issues with my installation of Windows 7 on my Mac Mini 2010 model 2.4Ghz Core 2 Duo. I used boot camp to create a partition, installed windows 7 64 bit from a copy that I bought from school, and it did install.
    Problem 1
    The problem that I am having is that the operating system states that 4GB of RAM is available and 3.5GB is usable. I currently have 8GB installed(Not factory, I purchased third party) and it reads fine in Mac OS X. Does anyone else have this problem or a similar one?
    Problem 2
    The screen will not expand fully in Windows 7. I have an ASUS 21.5in HD screen that will display up to 1080p connected to the HDMI connection on my mac. When I boot up, the screen will display in a smaller size(about 3/4 the size of the screen) while the rest of the screen is black.
    What have I tried?
    I have updated to the latest boot camp package on the Apple website to make sure I have the latest drivers for my NVIDIA GeForce 320M card.
    I have tried playing with the resolution in Windows 7 to display the maximum possible resolution
    I have made sure to install all Windows 7 updates.
    Problem 3
    I don't have full access to the monitor menu. When I touch the menu button, I can only change the brightness, sharpness, and that is it. I can't do anything about expanding the screen, moving the screen left or right, etc.(If I did have these options, then problem #2 would be solved).
    Nothing has worked.
    What do I think...
    I am thinking that it has something do with the fact that I am running the screen from the HDMI, although I don't really know why. It could also be the monitor. I could try to purchase the Mini Display Port adapter to see if that offers a better resolution, more freedom with my monitor, etc. This would fix problem 2 and 3. I did order a 24" Apple Cinema Display which will be here in a few days. If everything works with that, then I guess I wouldn't have a problem anymore, but I think it should still work with my existing monitor.
    As for the first problem, I am at a loss. Does anyone have any ideas?
    Thanks for reading.

    I completely agree with your assessment for Problem #1, but here we have it.
    I will try re-installing and will also double check with the drivers for the monitor. Thanks for the advice. If all else fails, I will just use parallels.

  • Driver update problem - which new nVidia card to buy for Mac?

    I have an old NVidia GEForce 9400 M driver running in a Mac OS X Mavericks Version 10.9.5, that will not work for Creative Cloud and I can not find an updated driver. Any suggestions as to what NVidia graphic card I should replace it with if a driver update can not be found?
    [Title edited for clarity... Mod]

    Check with Apple to find out which card is certified for your exact model computer

  • Audio driver for Mac Mini 2010

    Hi,
    I installed Windows 7 using bootcamp on my Mac Mini. During installation the Nvidia HD audio driver was installed. But I read somewhere on a webpage one should install a Realtek Audio driver instead.
    Which audio chip is built in the Mac Mini? Is it compatible to Realtek or Nvidia Audio chipset?

    Hello, see this...
    http://fixedbyvonnie.com/2013/10/how-to-fix-limited-or-no-connectivity-wi-fi-iss ues-in-windows-8/
    http://www.tomshardware.com/faq/id-1928682/limited-connectivity-resolve-problem. html

  • Mac mini bluetooth and safari problems

    I have done research on the boards,and so far haven't found a solution so i decided to make my own discussion.
    I have a 2009 mac mini that has run fine until this last month.When comeing out of sleep, the bluetooth magic mouse doesn't work. When i plug in a regular mouse to get me to my destop, everything in the top right toolbar is missing (adobe icon, time machine icon, bluetooth icon, wireless airport bars, and date and time) the search icon is still there, but if you scroll the mouse towards it, i get the not respinding beach ball.... if i go to system preferences, I get the not responding ball of doom as well... If i go to safari, it says i am not connected to the internet, even though when i do a network check, it says everything is up and running, If I go to restart, it just stays on the white screen with the loading circle unil i have to restart by holding in the button.....after the reset, everytihing works fine till i put the computer in sleep again (or logout of my name) .......
    I read that there are bluetooth problems with the mac mini of 2009, but this kind of sounds like more than that.. this hasn't happened before until i updated to LION... but sometimes it sounds like the mini is making a faint "squeaking" sound when it is trying to process things.. this doesn't happen often though... the mini is only 2 years old,almost 3, i can't imigine it dying soo soon... any ideas??? any help would be appreciated... thanks-bruce

    problem solved. Replaced key board, mousse and changed brands of USB bluetooth adaptor, which is now a D-Link brand I bought from an Apple store. Works like a champ.
    Lory

  • GP60: After installing new NVIDIA driver, no brightness controls work now.

    Hey guys! I have a small problem I'm hoping someone might know how to fix. I just installed a new NVIDIA driver update (I'm now on build ) and now my brightness controls won't work. My computer is stuck in a very bright setting, and I don't know how to fix it. I've restarted the computer, and I've put it into hibernation and restarted it.
    Before i did the hibernation, my computer was stuck in GPU mode (it would only use the GPU, even if all I was doing was using PowerPoint). The hibernation/restart fixed that, but not my brightness. Not sure if the problems are related, but throwing that in there too just in case.
    I also don't know if this is related as well, but my NVIDIA control panel will not work either; it says that I don't have a display that uses it or something like that. Again, probably TMI, but better safe than sorry!
    I'd appreciate any advice that I could get! Thanks!
    Specs:
    MSI GP60
    intel i5-4200
    NVIDIA GeForce GT 740M/2 GB DDR3 (my problem child today).
    Update: Now my computer is back in GPU-only mode and nothing is helping it swap out of it. I'm thinking the two are related now...

    Have you installed the Intel graphic driver?
    The hot key for brightness is controlled by EC & Intel graphic driver.
    Please refer to the product webpage to download the latest Intel graphic driver:
    http://www.msi.com/search/gp60/product/1
    Pick your model and select Download and your OS type to find the drivers.

  • IPad 2 as only monitor for Mac Mini

    hello. I own a Mac Mini (2010) and will be traveling overseas. I do not own a laptop, but I do own a WIFI iPad 2. Is there a way to use the iPad 2 as a monitor for my Mac Mini? I would not need to access any of the touch screen features on the iPad, just simply use it as a small monitor. If someone could provide me with a link or a step by step solution it would be very appreciated.
    thanks.
    Gus.

    There are apps that allow using an iPod as a secondary monitor for a computer. I do not think it can be the only monitor but maybe after you first use a regular monitor to setup the iPad monitor. You will have to look at the description of the apps/go to theri support site

  • I need a driver for canon image Class LBP6000 for Mac Mini Yosemite

    I need a driver for canon image Class LBP6000 for Mac Mini Yosemite

    Go to: > http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/laser_pri nters/imageclass_lbp6000#DriversAndSoftware
    It does not look like the Canon driver has change from Mavericks to Yosemite.
    If you just updated from Mavercks to Yosemite, see > OS X Mavericks: Reset the printing system
    If you have a new or clean install of Yosemite, see  > OS X Mavericks: Set up a printer

  • Overscan missing from new Nvidia Drivers - Mac MIni 2010

    So I was able to install new Nvidia drivers on my Mac mini 2010, however, there are no overscan options.. and my tv is connected via HDMI. Is there any workaround for this?

    The final version of Appleworks 6 does in fact work on the Intel Mini under Leopard -- but Apple doesn't support it, nor ship it with the new Minis.
    A free office suite that is MS Office compatible is NeoOffice:
    http://www.neooffice.org/neojava/en/maindownload.php
    a similar alternative is OpenOffice:
    http://www.openoffice.org/
    There is no office suite that is directly compatible with Appleworks files, but if you install AppleWorks 6 on your Mini, you could export files in formats that other office programs can read.

  • Hard drive for mac mini early 2009 model

    Hi,
    My hard drive stopped working, and I would like to purchase a new one.
    After checking with several vendors, I could not get an official answer if their drive is supported by Mac Mini early 2009 model.
    Can you please advice what hard drive vendors/models do you know are supported?
    Thanks

    Welcome to Apple Support Communities
    The Mac mini uses a 2'5" hard disk, and near all of these hard disks will work with your computer. You can buy the hard disk in OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    If you want more information, you can only use 9.5 mm hard drives, so search them in OWC and you will find hard drives that will work with your computer. HGST drives have a good reputation and work very well

  • What is the maximum hard drive height for installing two hard drives in the 2011 Mac Mini

    In a few months I'll be buying a Mac Mini. I want to upgrade the stock hard drive with a Seagate Momentus XT Solid state Hybrid Drive(720 RPM), which is 9.5 mm tall.
    I would like to add a second hard drive, a Seagate Constellation(7200 RPM), which has a "15mm z-height".
    I want to use those hard drives so I can have a speedy Mac Mini, but also have a great amount of storage(1.75 terabytes). My largest priority is storage space, but I also would like to use 7200 RPM hard drives as speed is also a priority.
    I would like to know if those two hard drives would both fit in the 2011 Mac Mini.
    And also, what does "Z-height" mean in regards to hard drives?

    9.5mm is the standard 2.5" drive height. This thread says one 15mm drive may fit, but recommends against a Seagate Constellation drive, due to the amount of power it draws.
    One option would be to add an external mini-stack, then storage space becomes a secondary concern. If you want speed, install an SSD for the operating system then put everything else on secondary storage. 

  • How to create bootable USB thumb drive from Lion on Mac Mini 2011?

    Hello folks
    Yesterday my new Mac Mini (Core i7 2,7 Ghz, 4 GB RAM, ATI Radeon HD6630M 256 MB) arrived. It replaces my old Mac Mini (Core Duo 1,83 Ghz, 2 GB RAM, Intel GMA950 64 MB). One day I'll replace the 500 GB 5400 RPM HDD in this Mini by an Intel SSD drive (just like I did with my previous Mini). I'll do a fully clean install then (formatting the SSD drive in Disk Utility and then installing Lion on it from a bootable USB thumb drive). The only problem is I can't seem to download Lion for free from the Mac AppStore (MAS) although I have bought a new Mac Mini which came with Lion pre-installed. I know how to create a bootable USB thumb drive with Lion on it when you download it from the MAS. But that's the problem... I can't seem to download Lion from the MAS for free. When I open the MAS while holding down the Option key I can download Lion but it will charge me for it. Is there any way I can download Lion from the MAS without paying for it? Since it already came with my new Mac Mini 2011 this should be possible I guess?
    And will I still be able to download the iLife '11 apps (iPhoto, iMovie and Garageband) for FREE that came with my new Mac Mini when I do a fully clean install as described above? Thanks in advance.
    Greetings
    Jocau

    After doing some research, it seems that there are only 2 WAYS to do a complete reinstall of Lion on the Mac Mini 2011 without paying for the Lion download in the Mac AppStore (i.e. recreating every partition, also the Recovery HD partition, from scratch e.g. when installing Lion on a clean HDD/SSD).
    1) COMPLETELY clone the Mac Mini 2011 HDD including all of its partitions to an external drive and restore it when you want to do a complete reinstall.
    2) Use the LION INTERNET RECOVERY feature built-in into new Macs that ship with Lion (this feature is present in new Macs starting from the Mac Mini 2011 and Macbook Air 2011).
    OS X Lion: About Lion Recovery 
    Lion Internet Recovery
    If you happen to encounter a situation in which you cannot start from the Recovery HD, such as your hard drive stopped responding or you installed a new hard drive without Mac OS X installed, new Mac models introduced after public availability of OS X Lion automatically use the Lion Internet Recovery feature if the Recovery HD (Command-R method above) doesn't work. Lion Internet Recovery lets you start your Mac directly from Apple's Servers. The system runs a quick  test of your memory and hard drive to ensure there are no hardware issues.
    Lion Internet Recovery presents a limited interface at first, with only the ability to select your preferred Wi-Fi network and, if needed, enter the WPA passphrase. Next, Lion Internet Recovery will download and start from a Recovery HD image. From there, you are offered all the same utilities and functions described above.
    As with the Recovery HD, reinstallation of OS X Lion from Lion Internet Recovery requires an Internet connection. See "Supported network configurations and protocols" below.
    Restoring iLife applications after Internet Restore of OS X Lion
    If you reinstall Lion on a new Mac that shipped with OS X Lion installed, on an erased or replaced hard drive, you can download iPhoto, iMovie, and GarageBand from the Mac App Store.
    After installation, start from Lion.
    Double-click the App Store icon in the dock.
    Enter your Apple ID and password.
    Click Purchases.
    If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
    You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to compete installation of your applications.
    Source: Lion Recovery
    It's a bit sad that these seem to be the only 2 options. Lion Internet Recovery is the preferred one here since my monthly internet traffic limit isn't a problem (but my download speed is). This problem could have been easily solved by Apple by just checking the system specs or serial number when trying to download Lion from the Mac AppStore. By using one of the 2 options in my previous sentence the Mac AppStore could see that I have a new Mac Mini 2011 that ships with Lion which would give me the option to download Lion from the Mac AppStore for free and eventually create a bootable USB thumb drive of it.

  • Which USB 64GB flash drives are compatible with Mac Mini?

    I need to use a USB 64GB flash drive, formatted for both PC and Apple, with my Mac Mini. The largest USB flash that Apple sells is 32GB. Which USB 64GB flash drives are compatible with Mac Mini. If most are, are there any that I should avoid? Thanks.

    I'm assuming that when I connect the USB to the Mac it gets formatted for Mac. Then I follow your directions and it gets formatted for Windows, in addition to Mac. I'd choose ExFAT since it is a 64GB USB.
    No no. A brand new drive will be formatted as "something", most likely something for Windows, and that could be FAT (which a Mac can also read and write to) or NTFS (which a Mac can read but not write to).
    So, you'll need to make sure it's formatted as ExFAT, instead of what it is. A medium can be in always only one format.
    About the expense: Fry's is advertising a 64GB Patriot USB Flash Drive for $22.99. Is that considered expensive for a USB flash drive?
    That'd be dirt-cheap, I'd say. Expect it to be very slow.
    I've read answers that are somewhat related to my question, and some warn that USB's are slow. Maybe I should consider another option?
    USB is not that slow (though there are faster buses). And USB flash drives come in different speeds, where especially the "write" speed can vary hugely.
    The advantage of USB is that it's widely spread, and lots of media is on the market, making it very affordable. The only other affordable alternative is an external HDD, I'd say, where you get much bigger drives for less money than a small 64GB USB flash drive...
    My main objective is that, in switching from Windows to Mac, I want to be able to access Windows files that I've backed up to a Seagate Free Agent. I bought a LaCie with the Mac Mini, but will still want to use the Free Agent. I need to reformat the Free Agent for the Mac (hopefully for Mac and Windows; while learning to use the Mac and Numbers and Pages I may have emergency jobs that I'll need to do with Excel and Word on the PC), so my plan is to move the files on the Free Agent to the 64GB flash drive, reformat the Free Agent so that, hopefully, the Mac will read the files on it after I move them back to the Free Agent from the USB.
    Why don't you copy the content of the Free Agent meanwhile to the Mac's HDD? Then copy it back after re-formatting the Free Agent? Why would you need an extra USB drive?
    Any ideas you have about how to achieve this objective will be appreciated. Maybe I should buy a third, small, external hard drive? Maybe there is a way to move the Windows files from the Seagate to the LaCie?
    Exactly... you seem to have already extra space on the LaCie drive...
    My understanding is that the Apple Store does not want to move files from an external hard drive to the Mac.
    I don't know where this could origin, but that's as wrong as it is funny. What has the App Store to do with you moving some files from one drive to another?
    I should add that I don't have enough remaining free space on the PC hard drive to hold the files on the Free Agent, so that is not an option.
    No, but you have a Mac with a built-in HDD, and you got the LaCie drive. Again, the Mac should have neither a problem to read from the Free Agent, nor to write to the LaCie.
    From what you're telling here, you have lots of space already with what you have, I can't see the need for the USB flash drive, at least not for the purpose you mention here.
    It seems that your understanding is that (a) a drive comes in a particular format for, or not for Mac, and you can't change it, and (b) that for some reason (App Store?!) Macs aren't allowed to copy files from external files. Well, both is wrong...

  • Facetime,Yosemite ver.3.0 mac mini

    Hi Team,Happy New Year!
    How to delete names\accounts in facetime,Yosemite ver.3.0 mac mini
    cheers

    hey man, i to had this problem. but on another thread here, there was a fix that i thought didn't work but it does. here's how i did it:
    in you user file go to the library, then preferences.
    locate the files marked "com.apple.garageband.cs and .plist" throw them away and then restart you mini.
    when it starts back up launch GB3 and it should work. did for me.
    -artoo

Maybe you are looking for

  • My Safari doesn't work properly after installing Lion.  Don't like it, how can I uninstall? (Cloud not worth it)?

    I upgraded ti Lion 10.7.2 for icloud but it's causing other problems with my mac.  My Safari doesn't work properly anymore.  Wishing I didn't upgrade, anyone know how to fix this or do i just have to uninstall?  Thanks,

  • Poor font quality in dynamic text?

    Does anyone notice that, for a dynamic text field, the font quality changes with font size?!?!! It will consistently become suddenly bolder at certain font size! It happens on various fonts! Refering to the following screenshots: http://www.terrencet

  • Gateway for Sybase or MS SQL - support for Timestamp

    Hi All, Is there any way to get Timestamp data out of Sybase or MS SQL Server? I thought this would be pretty straightforward, but after a short investigation I'm no longer that optimistic... The "Database Gateway for Sybase User's Guide" says in App

  • CANNOT_LOAD_BUNDLE_ERR from remote client (same local network).

    Hello, We're having problems (as many other people) with remotely connecting (but on same network) Server Monitor (1.8(5)) from a 10.6.4 client to the LOM IP (or FQDN) of our Xserve (model Xserve3,1)(early 2009)(running under 10.6.4)(LOM revision 1.1

  • Transaction with Variant

    Hi , I am trying to create a transaction variant for a transaction called PPOMA_CRM in SAP CRM. There is a context menu on a subscreen.Is it possible ot hide or deactivate the context menu when using tranasaction with variant. Similarly I have a loca