New OIF installation - Very slow response from OHS

Hi,
I've installed two instances of OIF 10.1.4.0.1 in order to create a test configuration to test XASP Attribute Sharing (i.e., we are not doing any other profiles).
Both OIF instances are using a separate instance of Sun Directory Server as its User Data Store, and both are using in-memory for Transient Data Store and have no Federation Data Store. Both OIF instances were installed similarly, using the "BASIC" installation choices, and are running on separate Redhat Linux servers.
The problem that we're seeing is very slow (10+ seconds to 30+ seconds) responses, even when we try to access a static HTML test page that we've placed in the OHS htdocs directory.
We've eliminated any networking problems as possibilities by a couple of tests that we've done, including shutting down the OHS and running a small, different test web server listening on port 7777. When we do that, response time for requests from that web server is almost instantaneous.
We are also seeing the same slow response when we try to access the test HTML page from the same server itself.
We have an SR open with Oracle, but so far, we've not been able to identify what the problem might be, so I'm hoping that perhaps someone else may have encountered this problem and have a resolution.
It is really puzzling because, as I said, this is a pretty vanilla default OIF installation, and it is doubly puzzling because even getting a tiny static HTML page is taking 10+ seconds. Also, I had installed OIF 10.1.4.0.1 on a Windows machine previously, and I don't see this problem on that earlier installation.
If anyone here has any insight into this problem, please let me know.
Thanks,
Jim

Hi,
I think I was able to temporarily eliminate this slow response problem. I think that the slow response problem is related to another problem that I posted about in the "Application Server - General" forum (see below, and Port 7200 conflict?
Jim
======= POSTED to Application Server - General forum ============
I think that I was able to temporarily work around this problem, plus another problem that I think is related (see: New OIF installation - Very slow response from OHS
What I did was to just comment out the "include" line for "dms.conf" in the Apache httpd.conf.
Doing that got rid of the "Address already in use" errors I was seeing in Apache error_log and also eliminated the slow response I was seeing from Apache/OHS (see that other post in "Identity Management" forum), BUT I am getting new errors about Apache not being able to find "htdocs/dms/Spy0".
I have the impression that dms is some kind of process monitoring system that Oracle has in 10gAS infrastructure? So, I have some questions:
1) What's the effect of dms not working?
2) Is it possible to just disable dms?
I hope that Oracle support can come up with a "real" fix for both problems, but in the meantime, as long as what I did doesn't break anything else besides dms, we can at least test the OIF stuff.
Jim

Similar Messages

  • Windows 8.1 not activating - very slow response from HP

    Sir/Madam,
    For past 4-5 days, i have been calling every day to HP regarding my windows activation issue.(every 10 mins a pop up shows " windows about to expire")PC settings show my windows will expire on 16th Dec if activation not done.
    1. On the first day i was told to update the windows and install it, i did that
    2. on second day i was send a link to update bios, i did that but no use.
    3. on the third day i talked over 50 mins on phone and some thing was installed through command prompt.nothing happened
    so than customer executive remotely accessed my computer again installed some files and told me to call next day.
    4. next day i was told to take backup on an external disk, and my system was restored, still nothing happened.
    After all this mental trauma and huge loss of work and time, today i decided to connect with Microsoft people.
    5. Now they asked "please ask HP for your product key" for you pre-installed windows. They should provide it"
    6. the Microsoft executive checked my system for key and suggested
    that the current key is only a trial version or test key and that is why this problem is persisting.
    Sir/ Madam this is a new laptop, and i have been so tensed and now i am loosing patience.
    Your executives give time and then they just don't call, even if they do it is not on suggested time slot.
    I request you to kindly resolve this matter ASAP. Please arrange a call back today between 9 AM to 11 AM, with a senior person who can answer all queries.
    An annoyed customer
    Thanks and Regards,Priyanshu Jaiswal

    Hi @PriyanshuJ ,
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
    If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
    Regards,
    George
    I work for HP

  • Slow response from search

    When I type in the search bar, I get a very slow response--the letters appear sluggishly, one by one, with about a one second delay between each. I have about 6000 songs and they are all on an internal drive.
    I created a new user account and dragged all my songs into iTunes in that account. Searching was lightning fast.
    So it sounds like the problem is isolated to my account. I want to know if there is a way to speed up the search. The easy solution is to rebuild the xml file by deleting the songs from my library and re-importing them, but I do not want to lose my play counts, last played dates, etc. If there is a program that can save all that information for me, that would also be acceptable.
    Any tips would be appreciated. Thanks!
    --Tim
    iMac G4   Mac OS X (10.4.6)  

    A few questions:
    -Is the application running on the same server as the database?
    -Single DB or RAC?
    -When last was the database analyzed?(SQL Stats)
    -Was there database admin scheduled jobs running(exports,RMAN ect.)
    -When last did you rebuild indexes? (do we need to rebuild indexes)

  • Slow response from PE3

    Sorry to be posting a question about this older version but I have just discovered the lack of Adobe support for PE3 and as a low volume user, I am not particularly keen to upgrade to PE7 if it won't recognize PE3 project files, and PE3 does all I want for now anyway. I am in the middle of editing this project by adding narration and background music, and finding very slow response to virtually everything I want to do. When trying to add narrative, it takes several minutes before it will start to record, then several more to save it. If I want to change any audio effects, same thing. Won't even open a function without a long delay, let alone save it. This problem only started as I've tried to add the audio. Up to now, editing the video clips has worked fine with only minimal delays.
    The file is 9MB, which I wouldn't have thought to be a problem, and it's a reasonably new system, with 2GHz dual core AMD processor, 500GB of hard drive & 2GB of memory. Not sure what other info I should provide that might help. Has anyone else had this problem and or know what I should try to fix? very appreciative of any suggestions. TIA

    Is yours a Vista machine? If so, you may want to optimize it for video editing.
    http://www.adobeforums.com/webx/.3bc448a7
    And, of course, ensure that you've got the 3.02 patch.
    http://www.adobeforums.com/webx/.3bc2fd1f
    The other thing that will greatly affect the program's performance is what you're using for source video.
    The program works best with DV-AVIs files captured over FireWire from a miniDV camcorder. Other files (such as video from hard drive or DVD camcorders) pose a variety of challenges that can impact performance.
    Another key issues is photographs. If you're using them as source files, you can easily choke the program if you're not optimizing them to no larger than 1000x750 pixels in size before you bring them into your project.
    If you can offer more details, we can give you more specific advice.

  • Very slow response when I click on a link, but almost instant response if I go back and click a second time.

    I often get very slow response when I click on a link, any link. But if I go back and click on the link again, then the page will open almost immediately. I discovered this by accident and noticed that this happens every time. It would be nice if I got fast response on the first click without having to do this silly procedure and it seems to me that there's a simple fix. I would appreciate it if you could help. I'm open to any and all ideas. Thanks again.
    Sincerely,
    Al
    Version 26.0 Firefox, Windows XP, sp/3

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Slow response from DPS

    I am seeing a very slow response time from our Directory Proxy Server.
    10:15:16 -0500 - PROFILE    - INFO  - conn=6 assigned to connection handler cn=default connection handler, cn=connection handlers, cn=config
    10:15:36 -0500 - CONNECT    - INFO  - conn=6 client=127.0.0.1:48475 server=127.0.0.1:7389 protocol=LDAP
    10:15:36 -0500 - OPERATION  - INFO  - conn=6 op=0 BIND dn="cn=proxy manager" method="SIMPLE" version=3 controls=""From the timestamps there is a 20 second delay (always seems to be the case) between when a connection request is handled by the "default connection handler" and the actual connection.
    I am assuming the problem lies in a misconfiguration in the "default connection handler" .
    I can provide additional info upon request.
    Any suggestions would be greatly appreciated.

    1 second for a query seems very slow...
    Did you really measure 1s on the client side or did you get that number from the proxy logs ? Note that times shown in DPS logs may be inaccurate to some extends. For more info about that , have a look at
    [http://blogs.sun.com/sduloutr/entry/etime_granularity|http://blogs.sun.com/sduloutr/entry/etime_granularity]

  • VERY Slow Responses in iTunes When Deleting

    Hi,
    Can anyone help me with a problem of VERY slow responses in iTunes when I try to delete or amend track information. For example when I click on delete it can take several seconds or more to respond and again when I confirm the deletion or amendment.
    I have had this problem for some time now and still occurs after a full re-install of the operating system (Leopard 10.5.8 on a PowerMac Quad processor and iTunes 10.6.3) All the remaining applications work fine just as they should do.
    Blackrockguy

    Does anyone have an answer for this question? Is there perhaps some outside plug-in that can help?

  • Very slow response, stopping for seconds in the middle of typing an email

    I'm having very slow response time with Firefox, so much so that I've switched to IE (gasp!). It'll stop suddenly for several seconds in the middle of typing an email and I have to wait to start typing again. Websites are timing out or just taking a very long time to respond after clicking on something. Yahoo in particular is extremely slow.

    For me, I think the "Skype Click to Call 5.11.0.9874" addon was causing the slow response. Once I disabled this addon Firefox was responding normally.

  • Firefox 4.0.1 is constantly freezing, having to reboot constantly, and not responding to key strokes, and very slow responses to keys strokes and to change sites

    firefox 4.0.1 is constantly freezing, having to reboot constantly, and not responding to key strokes, and very slow responses to keys strokes and to change sites. Firefox 3. (the previous incarnation of firefox) did not have such problems - this has started since "upgrading to 4.0.1 - I want to change back to the previous Firefox since this is a serious problem - need specific instructions on how to go back to the old Firefox

    Do you have multiple keyboard layouts installed?
    It is possible that you have switched the keyboard layout by accident.
    * http://support.microsoft.com/kb/258824 - How to change your keyboard layout
    Windows remembers the keyboard layout setting per application and you may have changed the keyboard layout by accident via a keyboard shortcut.
    * http://windows.microsoft.com/en-US/windows7/The-Language-bar-overview The Language bar (overview)
    * Make sure that you have the Language bar visible on the Windows Taskbar
    * You can do that via the right-click context menu of the Taskbar: Toolbars > Language Bar
    * Check the keyboard language (keyboard layout) setting for the application that has focus via the icon on the Language bar
    * You need to do that while Firefox has focus because Windows remembers the keyboard layout setting per application

  • Bex input help (F4) very slow response times

    When running queries on some of our InfoCubes or ODSs (in 3.5 of 2004s) we are getting a very slow response when using the Input Help (F4) option.  We have looked at the article the Nov/Dec 2004 BW Expert and the following SAP Notes 626887, 661251, 626887, 817335, 567746, 581802 and 748623. None of these are of much help.  We did not seem to have this problem before the upgrade to 2004s.
    Anyone have any other ideas?  The users are wanting it fixed.

    F4 help behaviour has changed in 04s 3.5 web run time.
    See attached thread for a solution (not very helpful in some cases.).
    /thread/263372 [original link is broken]

  • Slow response from SAR command

    Hi,
    I see slow response from SAR command on M5000 series server.
    SunOS prod452 5.10 Generic_144488-09 sun4u 01/03/2012
    sar 1 100
    14:25:43 %usr %sys %wio %idle
    14:25:45 1 1 0 98
    14:25:46 1 0 0 99
    14:25:48 1 1 0 98
    14:25:50 1 2 0 97
    14:25:52 1 1 0 98
    14:25:54 1 1 0 98
    14:25:56 1 2 0 97
    14:25:58 1 2 0 98
    14:26:00 1 2 0 97
    14:26:01 1 2 0 97
    Ideally i should have output at every one second, but it shows at every 2 seconds. Even i have tried to increase the interval but still i see it takes extra 1 sec. to give output.
    These are the pretty newly configured Machine, do you think something to do with server perf./config/ etc ? Does this impacts perf. to my running workload on this machine ?
    REgards
    Tilok

    Well, you could simply have a gigazillion fonts on your system that mess with the text engine. in that case some serious weeding out of fonts that you never use would help immensely. Otherwise you can always turn off hardware acceleration in the preferences, assuming the issue is related to that...
    Mylenium

  • Syncing photos from 4s to new 5s is very slow and stopping. All other sync is ok. Any tip? someone.

    Syncing photos from 4s to new 5s is going slow and stops. All other sync is ok. Any tips? someone.

    or... put your photos in "My Pictures" in My Documents, and viola, itunes syncs it to the iphone. only one sentence needed =/
    maybe im missing your point here, the long paragraph is mindboggling

  • Brand new iMac running very slow!

    I just purchased brand new iMac on January 2nd (the specifications are below).  The computer seems to be running very slow just doing normal everyday tasks. I have barely even used the computer and the only installations I've done where the ones recommended from the app store.  I saw I had an itunes update the other day and went to install, the computer sat there for 5 minutes before it did anything.  After it installed the app store still had the badge icon #1 next to it as if it never installed.  During the installation I was listening to pandora, I tried to turn down the music and it took about 45 seconds before it turned down.  I finally tried to log out of my account and it took over 2 minutes to log out.
    I haven't had the opportunity to mess with anymore since yesterday.  I feel a brand new computer like this shouldn't be running this slow.  Does anyone have any suggestions?  I will probably be contacting Apple Support after I get off work and maybe even exchanging the computer for a new one.
    21.5-inch: 2.7GHz
    Specifications
    2.7GHz quad-core Intel Core i5
    Turbo Boost up to 3.2GHz
    8GB (two 4GB) memory
    1TB hard drive1
    Intel Iris Pro Graphics

    If you are referring to this icon for the App Store:
    the red numeral 1 is to tell you there is an update available. It may even have started to download, and been paused.
    As far as your Mac's performance goes the Apple Store is the place to take it. You have paid for a one year warranty, and of course there is the option to return it within 15 days. Good luck.

  • New iMac running very slow

    Just bought my wife the new iMac (20" 2.4GHz). Connected her old G4 Mini in firewire mode. Transferred her applications and files. Everything is working but the computer is very slow. Much slower than my version 2 macbook. It surfs so slow and Safari has locked up several times. This is on her regular websites not something new. All her apps on the mini were the PowerPC variety and not universal binaries. Could this be an issue? I had Firefox that was optimized for the G4 processor on the mini. It worked on the iMac but was slow. I just installed the latest universal binary Firefox and it is faster but the hard drive is thrashing constantly. Now it only has 1 GB of RAM (I will upgrade) but still, I am only running 1 app... Was importing from a G4 a bad idea?
    Karl

    I ACTUALLY think so!
    I have the same iMac you have and it's SUPER fast! and I also have just 1GB Ram... but I'll tell you what I did...
    First, I went online and got *Universal drivers* for my *Scanner, Wacom pen tablet* etc... then I got the Universal versions of *CockTail, SuperDuper, HandBreak, Stuffit, Adium, Firefox*... time consuming I know but if they were AVAILABLE for Intel... it didn't seem to be a good idea to SAVE time... just an afternoon that maybe would have cost me a couple days trying to fix future compatibility issues...
    After doing that, I installed ONLY three *PPC Apps*, the ones I really need: *Photoshop CS, Flash and Dreamweaver 8*... actually my website is all in Flash, I only use Dreamweaver as a FTP program to upload my files...
    Both Flash and Photoshop will run under ROSETTA... even taking lots of RAM, they still run faster than in my old iMac G5 with 2GB Ram... *duo to the Intel processor*...
    At least I know that ALL DRIVERS are the original Intel... the iMac is super fast.. I just moved from ATT&T (disgusting 300 KBPS) to ComCast reaching *5 MBPS* on both the *G4 mini* and the *2.4GHz Intel Core 2 Duo iMac*...
    Such a great experience, the large clear screen... a fast machine and a great connection...
    If I were you I'd spend a Sunday *re-installing Leopard* and looking for the *Intel version of some Apps*... you don't have to sit in front of the computer all day... you can load the installation DVD and open a beer and come back after a while and download Leopard updates (and open another beer...) cook and listen to a good music... do little by little one day!
    If I have a major problem I always re-install the OS... I can't work on a sluggish machine! Better a day doing it than suffering for a LONNNNNNNNNG time!
    Cheers!
    : )

  • Mavericks on brand new iMac is very slow

    I have a brand new iMac with the basic configuration and the latest version of Mavericks. I use iLife, iWork, Photoshop, Office, Dropbox and Mailplane as the main programs but it is very slow. I did not restore from a Time Machine backup and installed all programs and files separately but I often get the beachball and the computer is often very slow, it also takes a while to start up. Is there any way to see what is slowing everything down?
    When I look at the activity monitor there are hundreds of processes but kernel_task always seems to be using 700mb+.
    Any ideas would be hugely appreciated.

    Hi, thanks for helping. Here are the results from your program.
    In response to the other poster's question the beachball happens with iMOvie, iPhoto, Mailplane and photoshop.
    Thanks..---
    Hardware Information:
              iMac (21.5-inch, Late 2013)
              iMac - model: iMac14,1
              1 2.7 GHz Intel Core i5 CPU: 4 cores
              8 GB RAM
    Video Information:
              Intel Iris Pro - VRAM: 1024 MB
    System Software:
              OS X 10.9.2 (13C64) - Uptime: 0 days 6:34:53
    Disk Information:
              APPLE HDD HTS541010A9E662 disk0 : (1 TB)
                        EFI (disk0s1) <not mounted>: 209,7 MB
                        Macintosh HD (disk0s2) / [Startup]: 999,35 GB (548 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. FaceTime HD Camera (Built-in)
              HP Deskjet D2300 series
              Western Digital Ext HDD 1021 2 TB
                        iTunes backup (disk2s1) /Volumes/iTunes backup: 1,1 TB (142,21 GB free)
                        Archive (disk2s2) /Volumes/Archive: 900,26 GB (490,8 GB free)
              Western Digital Ext HDD 1021 2 TB
                        iMac backup (disk1s1) <not mounted>: 899,97 GB
                        iTunes (disk1s2) <not mounted>: 1,1 TB
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.adobe.SwitchBoard.plist 3rd-Party support link
              [System] com.bombich.ccc.plist 3rd-Party support link
              [System] com.bombich.ccc.scheduledtask.B7A50B7A-D119-42A1-8C3E-EDF408B7B87E.plist 3rd-Party support link
              [System] com.bombich.ccc.scheduledtask.DC273830-C535-44B5-B601-D0F0504330F4.plist 3rd-Party support link
              [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
              [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
    Launch Agents:
              [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
              [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.bombich.ccc-user-agent.plist 3rd-Party support link
              [not loaded] com.google.keystone.agent.plist 3rd-Party support link
    User Login Items:
              iTunesHelper
              Mailplane 3
              TinyGrab
              Dropbox
              TextExpander
              Skype
    Internet Plug-ins:
              FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              Flash Player: Version: 12.0.0.77 - SDK 10.6 Outdated! Update
              AdobePDFViewer: Version: 10.1.1 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
              JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
    Safari Extensions:
              1Password: Version: 4.1.0
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
              Flash Player  3rd-Party support link
              Java  3rd-Party support link
    Old Applications:
              /Library/Application Support/Microsoft/MERP2.0
                        Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                        Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
              Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
              /Applications/Microsoft Office 2011/Office
                        Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
              /Applications/Microsoft Office 2011
                        Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
              Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
              dynamiclinkmanager:          Version: 6.0.0 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Adobe/Common/dynamiclink/CS6/dynamiclinkmanager.app
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
              dynamiclinkmediaserver:          Version: 6.0.0 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Adobe/Common/dynamiclinkmediaserver/1.0/dynamiclinkmediaserver.app
    Time Machine:
              Skip System Files: NO
              Mobile backups: OFF
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 930.71 GB Disk used: 420.35 GB
              Destinations:
                        iMac backup [Local] (Last used)
                        Total size: 838.16 GB
                        Total number of backups: 21
                        Oldest backup: 2014-01-05 03:58:08 +0000
                        Last backup: 2014-04-13 19:28:15 +0000
                        Size of backup disk: Too small
                                  Backup size 838.16 GB < (Disk used 420.35 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   3%          iMovie
                   3%          PhotoStreamAgent
                   3%          iPhoto
                   1%          iTunes
                   1%          WindowServer
    Top Processes by Memory:
              901 MB          iMovie
              688 MB          Finder
              483 MB          iPhoto
              442 MB          iTunes
              295 MB          com.apple.MediaLibraryService
    Virtual Memory Information:
              99 MB          Free RAM
              3.50 GB          Active RAM
              3.42 GB          Inactive RAM
              860 MB          Wired RAM
              5.94 GB          Page-ins
              103 MB          Page-outs

Maybe you are looking for