New & Old Appraisal systems

Hi,
I want new Appraisal system for performance appraisal of employee. And old Appraisal System for Training and Event Appraisal. Is it possible.
Samriddhi

Similar Messages

What's the difference between old SAP appraisal system and the new SAP appraisal system?

Hi Experts,
What's the difference between old SAP appraisal system and the new SAP appraisal system?
Can anyone shed some light please.
Thanks.

emgr_update no longer sets or gets the thesaurus from workbench. In 11 all workbench configurations are saved in IFCR configuration directly.
Hence the thesaurus entry should be added directly in version 11 Workbench as opposed to xml file in older versions.
And if you want to migrate the changes across environments then import_site script in control directory can be used.

Issue in retrival of Old Appraisal system template

Dear Expert,
landscape :ecc 6 , business package 1.41
Currently i am facing a problem in ESS/MSS regarding extracting old appraisal template.the scenario is currently old and new (objective setting and appraisal ) both are available at server . i activated old appraisal system but again system is no extracting appraisal data of the subordinates ,using path data Mss -> Team - > Personnel development -> Appraisals .
then i created an iview with BSP using HAP_Document but system is extracting new appraisal templete rather than old one.
Please let me know the solution as it is an urgent .
Edited by: Sadia Kamal on Jul 31, 2011 5:55 PM

Dear Expert,
I took the follwoing steps
1. In the customization i use the subcomponent Appraisal Systems, this corresponds to the switch position <SPACE>.
2. in the portal content i create a new iview using template BSP based view, i gave the BSP application name : HAP_Document and start page name : Documents_todo.htm (for create purpose) , Documents_recieved_open (for display purpose)
3. in the customization i define the Iview path .
then execute the system , in the case of creation system showing new appraisal templates and in the case of view system is not showing the appraisals against employees .
Please advise wht to do .

Switching from Old Appraisal System to Management By Objective (MBO)

Dear fellow practitioners,
I have a requirement to switch or migrate from the OLD appraisal system to the NEW appraisal system (MBO).
Does anyone have any information of the implications of switching the value of REPLA in T77SO from blank to 'A' or 'X' when the old appraisal system is already configured previously and is to be replaced by the new appraisal system with similar business requirements?
There is an existing appraisal catalog configured for the old appraisal system. How do I migrate the Appraisal Models in the Appraisal Catalog of the OLD Appraisal system to the NEW Appraisal Catalog in MBO?
I have not been able to find much information with regards to this. Therefore, many thanks in advance to anyone who can shed some light or provide some references to this matter.

Hello,
have a look at note 728542
It was planned to use the switch to replace the appraisal functionality in only one of the applications; technically it's turned out, this was not possible.
For using the usual functionality for appraisals in training and event management (TEM), HAP00 REPLA has to be set to space.
All other settings: X, T, A will cause problems.The reason is that many transactions of TEM delegate work to the central appraisal component and there the swith to MBO functionality is done (in the case X, T and A).
It is however possible to use MBO functionality for personnel appraisals. The transactions of MBO have to be used 'directly'.
These transactions are not part of the menu but can be added to the favorites list.
PHAP_ADMIN_PA
PHAP_CHANGE_PA
PHAP_CREATE_PA
PHAP_PREPARE_PA
PHAP_SEARCH_PA
PHAP_CATALOG_PA
There is no recommended way to load historical appraisal data. You will have to write a customer-specific program for this purpose.
It depends on your specific requirements whether you really need the data in R/3. For example, if you need the data for reporting, it may be easier to load the legacy data directly into BW. If you need them for program logic, e.g. to default values for new appraisals, you could consider loading the data into a customer table and read that table in your implementation of an appropriate user exit.
Hope this help
Sarah

Old Appraisal System (SAP R/3 4.7 ITS) upgrade to SAP ECC 6.0, Ehp4

Hello experts,
We are currently on SAP R/3 4.7 (using ITS) and will be upgrading to ECC 6.0, Ehp4 (using Netweaver Portal). This upgrade will be purely technical, no changes to existing talent modules.
Our employee performance appraisals are currently accessed via ITS using the Old Appraisal System. Can you tell me if it is even possible to link the old appraisal system to the NW portal?
If yes, what kind of changes are required here? Which iviews will I need to activate?
All of your advice is greatly appreciated. Thank you in advance.
Dina

hi,
THe old appraisal system runs on ITS , true .
In the new ECC 6 , there is a built in ITS , which should allow you to still run the old services . But it makes sense to explore the newer functionalites offered in EHP4.
Regards
sameer

Appraisal system

we are working on Appraisal system.
the requirement is, every person have his own criteria or ojective, no specific catalogue we can make
so client demanding to have option to type the criteria of employees manually while creating the appraisal rather than have it in appraisal cataloge.
how can we handle this in old appraisal system?
thanks if any one can help

im already using old appraisal system...no integration required.
client demanding open entery option on criteria and weighting column.
while creating appraisal of employee they can type, system is allowing..but weighting column is in display mode, so user can't entr any value in it......our client demanding it a open enterable column.
remember im using old appraisal system.
how to enable that weghting column so that user can enter value in that also?
thanks if any one can help.

I just bought a new MacBook Pro and it came with the old operating system, how do I upgrade it to the latest one without having to purchase it?

Hi,
Im a new Mac user. I currently just bought a new MacBook Pro. The first computer I got apparently had a problem with the flex, so I had to go change it for a new one. The first one had the latest operating system, the second one the store gave me didn't, yet it's still a brand new computer, so I don't see why I should have to pay for the new operating system, which should already come with my brand new computer. So I am trying to contact apple so they may give me permission to download it from the app store for free, due to this inconvenience and first bad experience. The vendor tells me that sometimes new computers may come with old operating systems because they're from an old batch of new computers. Oh and by the way, I'm from Honduras, and bought it at Jetstereo, in Tegucigalpa (the capital). This store is a licensed distributor.
Hope someone can help me,
Ankie Zapata

Go to the Mac App Store main page and click on Support under Quick Links.
(82704)

Business Event Appraisal Form in New Appraisal System

Hi,
I have created Business Event Appraisal Form in New Appraisal System. I have done Appraisals for one Business Event by an attendee.
Where can see this Appraisal Document of Business Event and do any change if required. Or from we can delete this documents of Business Event Appraisal.
I have tried tcode appchange but there only Personnel Appraisal templates are visible.
Samriddhi

Hi,
If you are using a template created by using the Objective Setting and Appraisals componet you can view and maintain forms filled in by employees via Transaction phap_admin_pa.
Br,
Art

Ho to change the old Logical System in the new Client?

Hi All,
after a Client copy, I've to change the old Logical System in all the relevant SAP tables in the new client.
In the Co tables too, such as CSKS.
Could anyone tell me hoq to do it?
Thanks
G.Rossi

Hi,
So the only solution would be to rename the SID of one portal.-> Yes,Rename the SID of on portal
Can this be done ? -> Yes,It can be done
How is it done ? -> Use Export/Import method.Export the database of one SID. Import the same with different SID.
Thanks and Regards,

I have a very old G$ that I use for ProTools. I just bought a slightly newer G4 and I want to find out if it is possible to transfer my old OS 10.2.8 system from one computer to the other so I can run my old ProTools system without a hitch. Thanks!

I have a very old G4 that I use for ProTools. I just bought a slightly newer G4 and I want to find out if it is possible to transfer my old OS 10.2.8 system from one computer to the other so I can run my old ProTools system without a hitch. I would rather not buy the old 10.2.8 system as it is expensive. Thanks!

Need to know which newer one, some cannot run 10.2.x.
One solution might be to clone the 10.2.8 Drive to another drive, then Install a later OS on it Preserving Users & Settings.
Best way to get an exact bootable copy of your old drive to the new one is with Carbon Copy Cloner...
http://www.bombich.com/software/ccc.html
Relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.

HT5624 I don't want Icloud. I believe it drains the battery of my phone. How do I get the old operating system back on my new iphone 4G?

I just got a new upgrade iphone from a 3G to 4G. My son updated the software with Icloud. I do not like it, it drains my battery. How do I get the old operating system back (without icloud). Also, I don't know how to close an APP anymore and I think that could be draining my battery as well. It doesn't work the same way when I doubled click and then touch the APP it doesn't give me a dash to close it up again.

Apple does not support downgrading the iOS.
As for icloud, go to Settings>icloud, scroll to bottom of screen and tap Delete Account.
As for battery drain...
Look through this...
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
Also, Settings>General>Background App Refresh: turn off apps you don't want refreshing data - this can preserve battery life.
Also try a reboot: press and hold the home and power buttons until the Apple icon is displayed, then let go.

Delta are pointing Old BW system instead of new BW system

Hi,
We are doing upgrade and as part of upgrade BI 7.0 we have copied existing BW system into new BW system.
I have a extracted data from R/3 to BI system.All the full loads went through successful except Delta data load into BI system.
Delta data source are pointing Old BW system instead of new BW system.
I have checked RSA7 where all the deltas are pointing to Old BW system instaed of new BW syste.
I beleive some thing might have happend during System copy from Old BW system to New BW system.
Please correct me if i am wrong about my scenario
I would like to delete delta init which is pointing to BW old system and would like to do new delta .
For that i would like to delte entries in R/3 source table ROOSPRMSF,ROOSPRMSC.
In BW side RSSDLINIT and will extract data using full update and then will do delta init without data transfer and do delta on it.
Please some advise me which is best way
to check with basis do ask them to correct it,other wise deleting deltafrom delta queue.
Its urgent

Hi,
You have to check the TRFCQOUT table to see if the Delta queues are still pointing to the old system ID.
Using ABAP program you can change the System ID. you can use the below code by creating a custom report( executable Program) you can change the System ID's . You should have done this before pulling delta's
anyway, you can try to change and see if you can pull deltas.
Tables: TRFCQOUT, RFCATTRIB.
Data: count type i.
parameters:
       ssystem like trfcqout-dest obligatory default 'Production System Id here',
       tsystem like RFCATTRIB-rfcdest obligatory default 'Non Production System Id here',
       tmod as checkbox default 'X'.
if ( sy-sysid = 'R/3 Production system id here' or sy-sysid = 'BW production system id here' ).
write:/ 'You are not permitted to run this program in production.'.
stop.
endif.
if tmod = 'X'.
Select count( * ) into count from TRFCQOUT where dest = ssystem.
if sy-subrc <> 0.
    write:/ 'Cannot process request, return code ', sy-subrc.
    stop.
else.
    write:/ count, 'entries in TRFCQOUT will be converted.'.
endif.
else.
This will update the qRFC queue by changing all specified queues
related to a source logical system to a target logical system.
This enables the copied systems to remain consistent without
having to run any loads.
UPDATE TRFCQOUT SET   DEST = tsystem
                  WHERE DEST = ssystem.
if sy-subrc <> 0.
    write:/ 'Examine return code not equal to zero.'.
    stop.
else.
    write:/ sy-dbcnt, 'entries were updated in table TRFCQOUT.'.
endif.
endif.
Thanks

How to delete old source system assignment and assign new source system.

Hi Experts,
I have bunch of datasource which are pointing to source system A (when I see it in RSA1). Recently all the datasources which are in source system A has been moved to source system B.
Now I have replicated all the datasources from the source system B. But in RSA1, still I am seeing the datasources which are pointing to sourcesytem A. I want this to be pointed to source system B.
Is there a way to do this?. I have searched in forum and found that this ned to be done manually. Do i need to do it for all the datflows? Is there any thing we can do when running BDLS?.
Please let me know if you need more inputs.
Thanks a lot for you suggessions. Eagerly waiting for valuable suggessions.
Thanks and Regards,
Saravanan Payani.

Hi Anindya,
Thanks for your quick reply. I want to keep the data what ever there in the cube as of now. From now on I want to extract data from new source system.
Basis team ran the BDLS but i don't see any changes. Still my datasources are pointing to OLD source system.
Background : I have an infocube for which the datasourec is ZCRM_MKT_001, which is available at source system IRDCLNT001. Now the above datasource has been moved to new source system IRXCLNT001. As my datasource is moved to new source system, I want the data from the new source system.
My issue : But when i expand the data flow of the infocube in RSA1to the lowest node, against the datasource i can still see the source system as IRDCLNT001 (which is old) under 'Object Information' column. I want this to be pointed to my new source system that is IRXCLNT001.
Is there any way to arrive at this?.
Thanks for your time on this.
Thanks and Regards,
Saravanan Payani.

Data migration from an old SAP 4.7-system to an new ECC6.0 System

Hello,
we have a reengineering-project, where we must migrate the old data from 4.7 to a new ECC6.0 system.
And it is not the same system.
Also there will be some data-mappings at the import.
For the import I thought the LSMW would be good. But how can I make the export??? Have you got an idea?
Thanks.
Sylvie

Hi,
From an experience which I gained after working on same scenario as u stated i can suggest u to follow following 3 steps.
Step1 Extract data into flat file using some extraction report.
Step2 Mapping program which we call as conversion program which will map data field values with proposed new values
Step3 Upload program which we have used our case as BDC reports to upload data into new system. LSMW is not preferred one as while uploading u may come come across various scenarios which are really difficult to handle using LSMW. U can also use BAPI's to upload data.
Regards,
Pritish

New Appraisal system using EHP5 and NWBC

Hello Experts,
Can we implement new appraisal system using EHP5 and NWBC client without a portal?
Sorry, i am raising this question again But after finding out that the new ESS works without portal using NWBC, i was wondering if the same is applicable to appraisal systems as well?

The only changes in PMS in EHP5 pertain to the pre-defined template. If you are using (as is most likely) the flexible template in your implementation, there is no relevant enhancement in EHP5.

New & Old Appraisal systems

Similar Messages

Maybe you are looking for