New output created in copy of eksu not gu00E9nu00E8rerez, why?

Hello, I have created a new output in copy of Eksu with transaction v/38 and activated it in my shipping point ... The problem is that when the delivery is created, the output is not generated... Can one of you guys explain me how it is generated ? And why extra customising point I should Check?
Thanks in advance for your precious help,
Best regards,
KF

Check the path SPRO->Logisctics Execution->shipping->basic shipping function ->Output control->output determination->maintain output determination for outbound deliveries.Has this output type been assigned to the respective output determination procedure? Maker sure relevant output master record has been created in t.code VV21/VV22.
Also you can do analysis in VL02N. Go to menu Extras-> delivery output->Item. Then click on i button. Click on the new output that you have added. The system will display the reason for it.
Regards,

Similar Messages

New contacts created on iphone 4s will not sync to outlook 2010

all my updates are installed. but the contacts I create on the 4S will not sync to outlook 2010. anyone knows how to solve this?

You need to restore the backup of your old hard drive to the new one. The iPhone is not a backup device, and syncing iTunes content is one way, from computer to iPhone. If you don't have a backup there is an alternative process that can get most of the data off of your iPhone, but it is complicated and cumbersome. See: Syncing to a "New" Computer or replacing a "crashed" Hard Drive

Create item copy other item (not template)

Hi experts,
I have a question related to PPM 5.0, is it possible create an item with copy other item? ( no copy for a template)? I have no the way to do it.
Thanks a lot,
Sara

Can you paste a screenshot of the Personalization page ?
Did you select the 'Complete' radio button option ?
Cheers
AJ

New 3.0 Firmware Copy and Paste not working with images

I have a 3G, 3.0 firmware, and whenever I copy and paste from Safari to email the images always come in as text links NOT as shown in the demo videos on the iPhone website, what gives?

Just following up with my own question. After rebooting the iPhone, images pasted properly into emails.

Specific videos copy to iPhone not working why?

There are a series of long YouTube videos that I would like to save, and later copy to my iPhone for permanent keeping.
I used TubeTV to download the videos, and set it to convert them to iPhone format. It did so, and I imported them into iTunes, where they play fine. I then dragged them into a "Video Copy To iPhone" playlist that contains several videos I want synced with my iPhone.
After syncing, those videos do not get transferred.
I wondered if there was something funny about the TubeTV destination format, so I used iTunes's menu option to "Convert for iPhone/iPod" then, after those conversions were done, dragged the new copies into that playlist, and synced. The videos STILL do not sync.
Other videos in that playlist do sync fine.
Any ideas?
(BTW, I moved the videos into the Air Sharing app, and they play fine in there, so it's not like they are incompatible with the iPhone.)

Sboq solved it -- I didn't know that only TV shows (not movies) can be synced via playlists.
Grrrrr...it's frustrating that there are so many hidden rules like this that aren't obvious. Theoretically, if I create a playlist called "Video Sync To iPhone" and tell it to always sync this playlist with my iPhone, what does it matter if it's a movie vs. a TV show...?
Anyway, thank you -- switching this YouTube video to a TV show (instead of a movie, the default) caused it to sync the way I wanted it to.

New DVD Drive reads some DVD's not all, why?

Hi,
I recently replaced my old dvd/cd drive in my notebook pavillion 2945se. It seems to work well except it only reads some store bought dvd's. It can read Star Trek: voyager, dc movies, disney, star wars discs, and most other store bought dvds but doesn't read marvel movies, import movies.
All of these were readable with my old drive. All other functions such as burning dvd/cd, and even lightscribing work. I have updated as far as everything that I can including codecs and using microsoft "fix-it" support which actually fixed some burning issues.
My theory is that the drive is more sensitive to flawed or dirtier discs, but considering these were readable before. Is there a fix for this?
I'm hoping that there is a fix for this since there are not many options for my laptop drive. Currently it is:
tsst corp cd/dvdw ts-l632m ata device
Thanks for your help.

Firmware update of DVD drive may solve your problem. But the main problem is to find the correct one. I found this by google.
However, I'm not recommend it, since I dont have real experience updating ts-l632m. I updated my DVD drive of dell notebook a while ago but using the recommended firmware from dell site.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Create Synonym for Object Type not supported; Why?

Does anybody know the reason why Oracle does not support the creation of synonyms for object types?
In our application we use many schemas to separate subsystems. The schema name has a version identifier included to allow multiple product versions loaded in the database at the same time.
We reference objects between schemas by using synonyms, to avoid hardcoding the schema names.
Therefore I must refrain from using object types, currently.
Does anybody have such a multi-schema architecture, also?
What is your experience?
Thanks,
Robert

Robert,
Type synonym is now supported in Oracle9i Release 2. The practice of using multi-schema architecture is an excellent practice for large applications. This provides a level of abstraction to simplify application maintenance, whihc you must have experienced. In conjuction with Object types, you can further simplify your application through reuse of user-defined types.
Do you have an email address that I can contact you for further discussion off-line.
Regards,
Geoff
Does anybody know the reason why Oracle does not support the creation of synonyms for object types?
In our application we use many schemas to separate subsystems. The schema name has a version identifier included to allow multiple product versions loaded in the database at the same time.
We reference objects between schemas by using synonyms, to avoid hardcoding the schema names.
Therefore I must refrain from using object types, currently.
Does anybody have such a multi-schema architecture, also?
What is your experience?
Thanks,
Robert

TS1702 Apps on new ipad starting back at level 1 not 97 why ????

ive bought a new ipad 4 and transfered all my games and data over from my old ipad but most of the games want too start fro level one instead of level 97 or which level they were at, but the game data is correct in the game centre, any ideas ???y

Transferring from old to new
http://support.apple.com/kb/HT2109

Everytime i download itunes it says some of my registry keys for copy cds are not there , why can i not get it to download correctly

every time i download itunes it says some of my registry keys are missing. i tried downloading again but same thing happens. what can i do to fix this.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2

IMG settings after creating new output type for a purchase order smartform

Hi all,
Do I need to make changes in IMG after creating a new output type in NACE for a purchase order smartform?
I have customized a purchase order smartform according to the requirements and copied an existing output type and assigned the custom form name.
When I am trying to create a purchase order to test it, I am going to the message tab for assigning the output type and if I press F4 on the output type field or if I give the copied output type there, it says output type is not defined.
Do I need to make any changes in SPRO?
Regards,
Anik

Yes. You have to add the new output type to the proper message determination schema.
Go to the IMG and select Materials Management -> Purchasing -> Messages -> Output control -> Message determination schemas -> Define message schema for purchase order -> Maintain Message Determination Schema: Purchase Order.
Select the proper schema, then Control Data and insert your new output type into the schema (eventually with any requirement that may be necessary... you probably want to use 101 like in case of the regular NEU message).
This should do it.

Issue when changing a PO: it creates a new output record automatically

Hello,
The goal is to prevent that a new output record is automatically attached to a purchase order after a change has occurred.
Current situation:
Create a PO for holding and an output record is created for output type ZHP1.
Release PO.
Print the PO in ME9F.
Change the condition record in MN05 and change the language of the print to a different language than the one of the supplier.
Change the PO by adding some header text, the system adds a second output on the purchase order in the language of the cond record.
This should not happen.
Any idea how to achieve this goal rather via customizing than new implementation/changing the SAP standard code!
Thank you in advance.
Aydin

Hi, I'm working with Aydin on this issue.
It creates the second message on the PO and if processed via ME9F then it prints.
But we dont want even that the second output gets created.
We do not work with version management so changes to PO do not create second message.
This second message comes up because language code has been changed in MN05 (one time change) after the first print.
System sees that first message on PO is with language A and now condition record is with lang B.
So If I change any little thing on the PO just to trigger message redetermination, it attaches a second output in the lang B.
If I dont change language code in MN05 and I still do my little change on PO, then it does not attach a second output message (which is good for us)
I thought the only way out is to write a requirement program that would check that if a message already exists on the PO for that output type then dont create a second one. What do you think?
Marc
Edited by: mmlafe on Jan 3, 2012 5:02 PM

Problem in creating New output types - Urgent

hi all,
Issue is that we had created a new plant(NSC) and for that plant, we had created new scripts for Indent and Sales Order. Means I have to create new output types for NSC Orders and Indents.
What i did that I went to SPRO- IMG- Basic Functions- Output Control- Output Determination- Output Det using Cond Tech- Output Det for Sales Documents , created new output types ANSC and BNSC for AN00 and BA00 respectively.
Then Output Types assigned to Partner Functions. Then I went to 'Maintain output determination procedure' and copied V06000 (Quotation Output) and V10000 (Order Output) to ZV0000(NSC Quotation Output) and ZV0001(NSC Order Output) respectively.
Then I went to ZV0000(NSC Quotation Output) and ZV0001(NSC Order Output) determination procedures and changed outputtypes to ANSC and BNSC instead of AN00 and BN00.
Now what should i do next?? I went to 'Assign Output determination procedures' but here no new entries can be added and I cant find procedures which I created.
Any ideas please??
Regards,
Aisha Ishrat
ICI Pakistan Ltd.

HI,
follow this steps:
1. In assignment u have to assign ur new output to respective documents
eg: Assign ZV0000(NSC Quotation Output) to QT sale doc type
2. After doing this u have to maintain condition record
goto tcode: VV11-> here enter ur condition type which u have defined-> inside fill in the details--> now click the <b>communication</b> ikon in top--> fill in the details
this is solve ur purpose
regards,
Arun prasad

Create a new "z" table as copy to mbew table

Hello Gurus,
I need a new "Z" table as copy of MBEW table for execute a stocks reports.
the MBEW table have 15 millions of records, but i dont know how i do for create the new table with all MBEW data.
I think make a table backup and restore this as ZMBEW object in DB library; but R/3 dont see this copy.
Any suggestions???
Best Regards,
Ernesto Castro.

Hi Ernesto,
first of all, you need to define this ZMBEW table in SE11 (DDIC) - you could copy the DDIC from MBEW. Then you have to activate that one and it will be empty.
I would then use CPYF with "from record 1" on OS level.
If you want to use your rstobj technique, I'm not sure, if something goes wrong, because not everything is changed:
- primary key contraint: "MBEW+0"
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Unable to create a new "output type"

I am a newbie. forgive me.
I am logged on to my IDES (client 000) using the SAPUSER username.
I am doing SD configuration and I am on the stage of output determination.
I was about to define a new output type but I cannot do it because the "new entries" button is missing ([see image|http://i1181.photobucket.com/albums/x421/darkmatter1/196235/outputdetermination.jpg]).
I did not encounter any notice or error when I opened tcode V/30. Even the "Copy As" is not enable.
[see image|http://i1181.photobucket.com/albums/x421/darkmatter1/196235/outputdetermination.jpg]
I do not understand why it is not appearing. Please help. Thank you.

hi Friend,
You are in Display mode,
Click the pencil ICON or press Ctrl+f1
hope this will work

HT204686 I bought an iPhone 4 from a youngster who had put his own Apple ID on it but could not remember the password. I backed it up yesterday and restored to my new iPhone and it copied the Apple ID across too. Now I have 2 phones with it on. Anything I

I bought an iPhone 4 from a youngster who had put his own Apple ID on it but could not remember the password. I backed it up yesterday and restored to my new iPhone and it copied the Apple ID across too. Now I have 2 phones with it on. Anything I do?

that must be really annoying !!
so this is what you call
FIND MY IPHONE ACTIVATION LOCK Find My iPhone Activation Lock - Apple Support
when you start using iCloud on any iOS device and enable find my iPhone, this prevents a new user from using it, and also prevents anyone from using the phone
as it is locked to previous owners account ,this is also the case if when a phone is lost or stolen.
the only way around this is to have the previous owner reset their apple id by going to @ applied.apple.com
if they are unable to do this, then the only other way around this is to have the previous owner get a copy of their original receipt and call apple support who can then lift this lock if they get a copy of the receipt
unfortunately there is no quick fix -> the below link explains what you should do before you sell or give away an iPhone
What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support

New output created in copy of eksu not gu00E9nu00E8rerez, why?

Similar Messages

Maybe you are looking for