New P67A-C45 (B3) - Static/hissing noise almost in sync with HDD sound

I just bought a new New P67A-C45 (B3), fixed everything up, installed the realtek sound driver then i start to hear the static/hissing noise from my speakers.
The noise seems to be in sync with the HDD activity.
I research online and it seems that not only I have this problem, quite a few people having the same sound chipset on a Gigabyte board are also facing the same problem.
But all solutions is in the direction of mac, stating that a v262 driver have solved the problem.
Anyone got any idea about this? I am rally very irritated with the static/hissing noises coming from the audio..

Quote from: HU16E on 11-April-11, 07:47:47
Have a look in your manual of the included accessories with your mainboard. Note the 'Back I/O Plate'.
For this I think you all are talking about the back panel right? One of the tabs is touching the exterior of the ethernet port. I assume it should be correct?
Quote from: sjay on 11-April-11, 07:48:46
What they mean is you need to remove the graphics card and unplug the cables from the motherboard and remove the motherboard itself, check the grounding screws (The screws that the mobo sits on and in to which you screw the mobo screws into to hold it down) and make sure that all of them match the holes on the mobo, if there are any that don't match Remove the standoff because it is causing the improper grounding you are experiencing. If you are missing any ("only using two"?) and have standoffs laying around, add the standoffs to the holes that fit.
I did this just last night and it fixed my reboot problem after I had done everything via bios and OS to try and solve it.
Done as well. The base plate in my casing for the motherboard was just fitting for it. I do not need any stand-offs, there were six bumps that align with screw holes nicely.

Similar Messages

How do I synce my Ipod to a new computer that isnt the one that I originally synced with?

How do I sync my Ipod to a new computer that isnt the one that I originally synced with?

- Transfer iTunes purchases to the new computer by:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
- Transfer other music by using a third-party program like on of those discussed here:
newer copy
- Connect the iPod to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup.
Note that the iPod backup that iTunes makes does not included synced media like apps and music.

[svn:fx-trunk] 8303: This change tries to support legacy usages of StyleManager. setStyleDeclaration() while keeping the new "subject based" internal index of style declarations in sync with selectors.

Revision: 8303
Author:   [email protected]
Date:     2009-06-26 07:50:46 -0700 (Fri, 26 Jun 2009)
Log Message:
This change tries to support legacy usages of StyleManager.setStyleDeclaration() while keeping the new "subject based" internal index of style declarations in sync with selectors. We no longer support the invalid usage of constructing a CSSStyleDeclaration with one selector but re-registering it with StyleManager.setStyleDeclaration with another selector.
QE: Yes, look out for test cases that incorrectly create a CSSStyleDeclaration with a selector AND also use StyleManager.setStyleDeclaration(). I saw one invalid usage in the mustella test file: tests/Managers/StyleManager/AdvancedCSS/mixedSelectors/AdvancedCSS_MixedSelectors, specifically the "CSSStyleDeclaration_CSSSelectorKind_Type_method" test case.
Doc: Yes, please remove any examples that showed a CSSStyleDeclaration being constructed with a "name" as that is incorrect. You only construct these instances with a selector, or nothing.
Reviewer: Glenn
Checkintests: Pass
Bugs:
SDK-21714 - Dynamically created styles are ignored by spark components
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-21714
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/StyleManagerImpl.as

Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.

Hi. my laptop was reformatted recently, and my itunes there erased. i created a new one but the problem is it doesn't sync with my ipod anymore. what is the solution for this? can someone give me a tip? will really appreciate. thanks

hi. my laptop was reformatted recently, and my itunes there erased. i created a new one but the problem is it doesn't sync with my ipod anymore. what is the solution for this? can someone give me a tip? will really appreciate. thanks

Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

My old iphone backup date of 1/15/12 on itunes seems out of date. I just synced it before I am going to initiate my new iphone 5 from the Mac that I just synced with. Will it pull the recently synced info or the 1/15/12 data?

My old iphone backup date of 1/15/12 on itunes seems out of date. I just synced it before I am going to initiate my new iphone 5 from the Mac that I just synced with. Will it pull the recently synced info or the 1/15/12 data?

Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
After this, do an update from the App Store.
Thats all there is to it.
For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though.

New P67A-C45 B3 motherboard buzzing

Received my P67A-C45 B3 revision today.
Not long finished installing it but I am now getting some buzzing. The blue lights at the top seem to flicker. If I push down a bit on the heat sink, it stops a bit. It could be a resistor, i don't know. It all the same as before, except this one has bios 1.9 and not 1.7.
Any ideas?

I've tried 3 boards 1155 boards and they all did it, not sure why, i've made loads of other socket PCs without hearing it. You accept disabling c-state as a solution? Perhaps you want to contact MSI so they might try and fix this?
Some others:
https://forum-en.msi.com/index.php?topic=146982.0
https://forum-en.msi.com/index.php?topic=147017.0
https://forum-en.msi.com/index.php?topic=147010.0

I have a new computer and de authorised my previous one and authorised this new one. when i try to sync on new computer it wants to wipe my iphone and sync with computer which doesbt have my music etc on it. it tells me i am synced with another itunes ?

when i try to sync my iphone 5 with my new computer a message comes up warning me it will erase all my stuff on the phone and replace it with whats on the computer telling me i am synced with another itunes library ? i have authorised this computer and de authorised the old one !
how can i sync my phone without erasing it ?

See Recover your iTunes library from your iPod or iOS device.
tt2

HT1727 the computer my itunes were on completely crashed. i rebuilt my files on a new computer but my 4th generation ipod will not sync with the new library. what can i do to have the two devices work together again?

the computer my itunes were on completely crashed, nothing was recoverable. i bought a new computer but my ipod would not sync with it. i rebuilt my itunes library from scratch but my ipod will not sync with it.how do i get the two devices to sync?

Follow the steps given here…
Syncing to a "New" Computer or replacing a "crashed" Hard Drive

New Insignia NS-L55X-10A sound not in sync with surround sound

My new Insingina NS L55X 10A was delivered this morning, replacing a 7 year old 52" Hitachi. Of course they just swapped the TV's, plugged it up and attached the cable coax and made sure it would turn on. I didn't notice until they left, but the sound is out of sync with my surround system. I didn't have this problem with the Hitachi. I spent several hours, replacing all the cables with HDMI, and everything is still the same. Is this a common problem and is there an easy fix? What am I overlooking? Thanks for any replies.

I misread your original post I guess. I thought you were talking about the lipsync being off from the sound when watching tv or a movie.
Yes it is possible for there to be a slight delay when using a receiver and the internal speakers of the tv. Normally its not too noticable but it can happen. Most people don't watch tv with both sets of speakers on, you either listen to the tv speakers or the receiver not both. I have owned several home theatre systems and sometimes there is a delay from one system to other. Normally not very much though.
Out of curiosity can I ask you why you would watch tv with both on? The correct thing to do would be turn your tv all the way down when using an amplified system or better yet disable the internal speakers of the tv if your using a surround sound system.
This may be exagerated to some extent with the new systems utilizing HDMI connections and advanced processing features. One device is processing the signal at a different rate than the other one so you could in fact get some sort of reverb effect by using both. The delay is going to be in miliseconds though. Or it is possible that the surround sound receiver is utilizing some sort of built in delay to some of the speakers. Where as the tv would not employ any delay at all. It could also have something to do with how the devices are connected or switched. One set up could possibly have less delay than the other.

Ipad has asked to be restore on new mac, did this and now it will not sync with iTunes?

I've just plugged my ipad into a new mac and the ipad asked to be restored. I did so as I was not given any alternative and not the ipad will not sync with anything from the mac.

iOS: Device not recognized in iTunes for Windows: Apple Support ...

Static Hiss noise in onboard sound MSI K9N2 Sli Platinum

Just got this Mainboard, made sure it booted and updated the bios before installing it into the case, all went well. Now I have the OS in all drivers, except something listed under other device called co-processor has a yellow exclamation point, tried installing all drivers from utility disc and still there.
But the most annoying thing is the sound, I noticed this hiss/static sound as vista opened. Removed Vista's drivers which automatically install and installed the realtek drivers and it is still there.
Has anyone else had this problem with the on board sound? Is there anyway to remedy this?
I hope this is not just a Vista problem.
Can I get some help? Anyone?

Quote from: Fredrik on 21-September-08, 03:12:27
About the co-processor, it is most likely a driver thing. You have to do a firm manual update, through DeviceManager, and force Winsta to use the driver you suggest.
A bit on the evil side: If that driver wasn't installed successfully... Always when installing Windows have as little hardware as possible. One builds from the bottom, with Windows too.
Yeah I found out, that it was a conflict between my graphics card driver and the chipset driver. I had to uninstall my graphics driver and get the latest one available then reinstall them.
No more coprocessor errors in device manager.

I just bought a new computer, now itunes tells me I can only sync with one computer. It only offers me the choice to erase and sync. I do not want to erase my ipod, I just want my music on the new computer. Can't I just transfer the songs from the ipod

I just bought a new computer. Itunes only offers me the option of erase and sync, as I can only have it sync'd with one computer. I want to move my music to this computer from my ipod. Is this possible, or do I have to go back to my cds and upload everything from there? I just want to be able to move my music from my ipod to the new computer.

You need to transfer your iTunes Library from the old computer to the new one - then you can carry on syncing as normal. You can't move non-purchased music from an iPod to iTunes using iTunes. For purchased music, choose iTunes > File > Transfer purchases...

I installed firefox on a new Win 8 laptop, and my account can not sync with my Win 7 laptop.

I recently purchased a new Win 8 laptop. When I installed firefox and go to sync in option, it doesn't give me the old 4x3 box with code. When I entered my email, it couldn't find my account either.
I am not sure where is the problem, because my old Win 7 laptop and HTC One X are both synced, when I could use the 4x3 box. The Win 7 firefox and Win 8 firefox are both ver 29.0.1, but the sync tab in option looks different.
In summary, I have two problems
1) My old laptop has a sync account set up long ago, but not firefox is not recognizing my account by my email.
2) My new laptop doesn't give me the 4x3 sync code.
3) Just for safety, is there a way to export all of my firefox setting and bookmark from my win 7 laptop? This way I can have the files for backup, in case my sync account is corruptedd or something, and maybe I can import the files to the new laptop this way.
Please let me know if there are solutions to these problem. Thanks!

Hi joey0352,
Yes check out the article about Firefox profiles:[[Back up and restore information in Firefox profiles]]
The profile folder will have all of the information stored in it on your Windows 7 computer. If you have any questions about moving the file we are happy to post back.

TS4062 new iphone lists wrong phone number when trying to sync with itunes

I received my new iphone 4s in the mail and when I try adding it to my itunes for syncing the wrong phone number shows up. The phone works and the number is correct but the one Itunes recognizes is a different number.

I received the phone by mail. I had ATT activate it with my old phone number I had on a blackberry. Everything works fine. The number under settings>phone> my number is the correct phone number.
It's when I try to add this phone to Itunes with a USB cable, itunes recognizes a different number. So i'm guessing the sim came with that number and when ATT activated the phone with my correct number, that this number is still in the phone memory somehow.
At ATT they say the phone is fine. My new number is recognized and works properly. It's just that when adding it to my itunes the new number is not recognized on the initial setup screen.
I'm not even sure this matters but itunes recognizes this phone with a different number than the one that works.

I updated the OS on my new ipad and now can't even start a sync with my win7 PC. I had no problem before the OS upgrade - How can I fix it?

I never had a problem synching before I updated the OS on my new ipad and now I can't even start a sync. I have a win7 PC and use the ipad every day. How can I fix this so it syncs again?

I don't have my computer in front of me to check, but when you connect your iPad to your computer and open iTunes, there are options on what to sync. To manually manage music and other options.
If you can sync movies but not music then it suggests that the connection is good, so that part works. Which means it just may be a setting in iTUnes (and I mean iTunes on the computer, not the iPad)

New P67A-C45 (B3) - Static/hissing noise almost in sync with HDD sound

Similar Messages

Maybe you are looking for